The thickness of Pakistans Balochistan Green Onyx slabs can vary depending on the specific product and supplier. However, typical thickness options for these slabs are usually between 1.5 cm (0.6 inches) and 3 cm (1.2 inches). It is recommended to check with a specific supplier or manufacturer for the exact thickness options they offer.

Pakistans Balochistan Green Onyx is typically considered to be of premium quality and is often categorized as Grade A.

Yes, Pakistans Balochistan Green Onyx can be used for exterior applications in rainy climates. Onyx is a durable and water-resistant natural stone that can withstand rain and moisture. However, it is important to ensure that the stone is properly sealed and maintained to prevent any water damage or staining. With the right installation and maintenance, Balochistan Green Onyx can be used for various exterior applications, including outdoor flooring, cladding, and landscaping, in very rainy climates.

Yes, Pakistans Balochistan Green Onyx can be used outdoors. Green Onyx is a type of onyx marble that is known for its stunning green color and unique patterns. It is a durable and hard stone that can withstand outdoor elements, making it suitable for various outdoor applications such as paving, landscaping, wall cladding, and outdoor furniture. However, it is important to note that like any natural stone, proper sealing and maintenance may be required to ensure its longevity and protection against weathering.

Yes, there are color variations of Pakistans Balochistan Green Onyx, ranging from light to dark green with white or cream-colored veining. The intensity and pattern of the veining can vary depending on the geological formation and location of the quarry. Some quarries may also produce a slightly bluish-green hue.

The coefficient of friction of Filled Pakistans Balochistan Green Onyx tiles can vary depending on the specific type and finish of the tile. Different factors such as the surface treatment, honed or polished finish, and texture can influence the coefficient of friction. It is typically measured using a standardized test known as the coefficient of friction (COF) test, where the values range from 0 to 1. To determine the coefficient of friction for Filled Pakistans Balochistan Green Onyx tiles, it is recommended to consult the manufacturer or supplier for specific information. They can provide you with the tested COF values for their specific product.

I dont have access to current market prices or sales data on Balochistan Green Onyx. However, Green Onyx is generally considered a valuable and relatively expensive stone due to its unique color and patterning. The price can vary depending on factors such as quality, size, and rarity.

When carving Balochistan Green Onyx with CNC milling tools, here are a few recommendations: 1. Tool Selection: For carving intricate details, it is advisable to use diamond-coated milling tools. These tools provide excellent cutting performance and durability. Specifically, for the diameter range of 0.8mm-2mm, you can consider using diamond-coated ball-end, tapered or V-shaped milling tools. 2. RPM (Rotation Speed): Balochistan Green Onyx is a relatively hard material, so you need to operate the CNC machine at a lower RPM to prevent excessive tool wear and overheating. Start with an RPM range of 10,000-20,000 and adjust as necessary based on the cutting performance. 3. Feed Rate: The feed rate determines the speed at which the tool moves through the material. Balochistan Green Onyx requires a slower feed rate to achieve precise carvings. Begin with a conservative feed rate, such as 5-10mm/min, and gradually increase it while monitoring the tools performance. 4. Depth of Cut: To prevent tool breakage and ensure a smooth and accurate carving, it is recommended to take a conservative approach to the depth of cut. Start with a small depth of cut, such as 0.2mm, and adjust as needed based on the hardness of the specific Balochistan Green Onyx slab. 5. Coolant/Lubrication: Using a coolant or lubrication during the carving process can help reduce heat buildup and prolong the tools lifespan. Ensure that the coolant or lubrication is appropriate for use with the stone type and compatible with your CNC machine setup. Remember to always test your settings on a scrap piece of Balochistan Green Onyx or a small inconspicuous area before proceeding with the actual carving. This will allow you to fine-tune the parameters and ensure optimal results.

Yes, Pakistans Balochistan Green Onyx can be used in landscaping. Green onyx is a unique and beautiful type of onyx that features various shades of green colors and beautiful patterns. It can be used to create stunning landscapes and add an exquisite touch to outdoor areas. In landscaping, the Balochistan Green Onyx can be used in various ways, such as: 1. Paving: It can be used for creating pathways, driveways, or patio areas. The unique green color and patterns of the onyx can add an element of luxury and elegance to the outdoor space. 2. Retaining walls: Balochistan Green Onyx can be used to build retaining walls, which not only serve their functional purpose but also create a visually appealing backdrop for the landscape. 3. Water features: The green onyx can be used to build stunning water features like fountains or cascades. The translucency of onyx allows light to pass through it, creating a captivating visual effect when combined with water. 4. Decorative elements: Green onyx can be carved into various shapes and forms, making it suitable for creating decorative elements like decorative stones, sculptures, or planters. These can be used to enhance the aesthetic appeal of the landscape. It is worth noting that onyx is a natural stone and requires proper care and maintenance to preserve its beauty. Additionally, using onyx in landscaping can be more expensive compared to other stone options.

Yes, Pakistans Balochistan Green Onyx can be used in an office. Green Onyx is a type of marble that features beautiful shades of green, which can add elegance and sophistication to any space, including office interiors. It is commonly used for countertops, flooring, wall cladding, and various decorative elements in office settings. Its unique veining patterns and vibrant color make it a popular choice for creating a visually appealing and luxurious environment.