2024-03-28 12:25:07
Match Your Image Post Your Needs

Cnc Machine

( 212 )
Suppliers:
  • Steinmaster Aquajet - Waterjet Cutting Machine, CNC Stone Center
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Finishing, Profiling MachinesCNC Working Center

    FOB Price:

    Warranty: 12 Months

    Usage: Granite, Marble, Artificial Stone, Basalt

    Machinery Function Features:

    In comparison to the other cutting technologies that have limitation in materials that can be processed with, waterjet cutting does not have such handicap. Water Jet cutting technology is applied for cutting extremely hard materials such as granite, titanium, bullet proof glass, but also very soft materials such as composites, sponge, foam, frozen food. One of the most important advantages that waterjet technology offers is very low energy amount added to the material, so there is no thermal treatment. Entire construction is protected from water aggression by heat zinc treatment. High Pressure system and all of subassemblies are designed and manufactured by American KMT – world leader in water jet cutting technology.
    Preferences:
    - Rough steel construction, monolith design, vibration free..
    - Heavy duty linear guide rails provide accurate positioning with no friction.
    - State-of-the-art AC Servo system drive cutting head fast and precise.
    - Rapid speeds up to 50.000mm/min.
    - Ball recirculating screws responsible for smooth and zero backlash positioning.
    - Double driven Y axis (bridge) by two motors prevents racking and misalignment.
    - Work table consists of replaceable grill segments, entire tank is physically separated from the machine..
    - American KMT hydro aggregates provide long life exploitation with cost effective service and maintenance..
    - Rotational fourth axis provides processing of tubes and round parts.
    - Windows-based Software provides ease-of-use while delivering robust functionality.
    - 24-hours local service support network provides no down time operating.
    STEINMASTER Cnc stone machining center
    The pursuit of freedom and flexibility in mashinery the desire to eliminate multiple work holding placements, the advancement of engineering technology, electronics and software, led from the vertical machining center’s emergence to the development of the machining center’s full range of freedom and flexibility with the introduction of 5 axis CNC machine technology. 5 axis machining technology is commonly based on the concept of the articulated head, which replicates the movement of the human wrist in the articulation of the machining spindle at the end of the quill, providing the freedom to rotate about its axis and to incline in relation to it, and to which is combined the basic 3 axis movement of the machining center yielding a full, free and flexible CNC movement. Other combinations of axes are also available including CNC controlled rotating tables, rotating lathes, special aggregates for the spindles, concurrent machining of multiple 5 axis heads, combinations of machining heads and other technologies such as water jet.
  • Quartz Stone Countertop ATC Processing Center Machine
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Finishing, Profiling MachinesCNC Working Center

    FOB Price:$15000-30000

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    1). Strong machine structure with water tank
    2). Water-cooling spindle of different power options
    3). Cutting, engraving, polishing, etc
    4). One year warranty
    5). CE, ISO9001 certificate
    China Best CNC Cutting and Polishing Machine for Quartz, Granite and Marble
    cnc machine for marble and granite Main Features:
    1). This CNC Cutting and Polishing Machine for Quartz, Granite and Marble is equipped with strong machine structure welded by thick square tubes, excellent stability with no deformation. High precision rack and pinion for X/Y axis and ball screw for Z axis, high precision and long lifetime;
    2). High-speed water cooling spindle and high-performance subdivision driver ensure to work stably for a long time;
    3). UncGraphics. NX3.0, Mastercam9.0 other software, set the CAD / CAM as a whole, through digital analysis, design, the product was processed to support procedural pre/igs/scep/dxf/dwp and other documents;
    4). Vertical-type ATC system makes the whole process from the hole, cutting, shaping and polishing to a variety of milling processes go, the full realization of a high degree of automation;
    6). Break-point memory and power off continuous engraving functions;
    7). Different kind of processing works can be done, such as polishing for backsplash, former anomalous edge, cutting and polishing water tap hole through the automatic tools changing.
  • CNC waterjet cutting machine for countertops cut- 3020
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Finishing, Profiling MachinesWaterjet Machines

    FOB Price:

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite

    Machinery Function Features:

    High Pressure Pump Model :50HE
    Dimension(L*W*H) : 1800mmx1000mmx1400mm
    Weight :1130Kg
    Power rate: 37kw/50hp
    Max. pressure : 420Mpa /4200bar,with low pressure piecing function and
    pressure adjustable :
    Working pressure: 300-350Mpa
    Max. oil discharge :104L/min
    Max. Flow rate : 3.7L/min
    Max.Φ of orifice: 0.33mm
    Power supply : 380V 50hz
    Water supply : ≥15.1L/min
    Water pressure : ≥0.1Mpa
    Cooling system
    Build-in Air cooling system no need extra chiller.
    Popular in cutting: Glass, Marble, Granite, Aluminum, Copper, Steel, etc
    Type: 3020
    Mechanical dimension : 3900*3050mm
    Max.cutting range(mm) : X=3000mm Y=2000mm
    Travel of Z axis : 150mm
    Servo system :YASKAWA / WEIHONG
    Control accuracy : ±0.01mm
    Cutting accuracy : ±0.1mm
    Re-positioning accuracy : ±0.025mm/m
    Max. moving speed : 18000mm/min
  • CNC Water Jet Cutting Machine
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Finishing, Profiling MachinesWaterjet Machines

    FOB Price:

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Onyx, Sandstone

    Machinery Function Features:

    PRECISE CUTTING FOR MARBLE, GRANITE, MOSAIC!
    WATER JET CUTTING MACHINE COLORFUL SCREEN CNC UNIT MACHINE GANTRY DOUBLE SIDED, AC SERVOMOTOR AND PLANETARY GEARBOXES 20m/min POSITIONING ACCURACY AND 0,05 REPETABILITY WATERPROOF LINEAR RAIL SYSTEM SPECIAL STEEL CONSTRUCTION
    ORGINAL GERMAN BRAND B HLER ECOTRON 404 MWC HIGH PRESSURE PUMP (OPTIONAL KMT)
    CUTTING TABLE (STAINLESS STEEL TANK AND CHANGEABLE GRID SYSTEM)
  • Scaninvent CNC-C3 Cutting And Engraving Machine
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Finishing, Profiling MachinesStone Carving,Engraving Machine

    FOB Price:

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate

    Machinery Function Features:

    CNC-C3
    The C3 is a cutting and engraving machine designed to accurately process stones and marbles for sinks and for kitchen counters in an easy way.
    All machine operations are performed by a computer in a Windows environment located on the control panel.
    The program on the computer was developed by the company Scaninvent, it is easy and simple to use and enables us to design, modify and save thousands of designs and objects on the machine without to have experience in CNC techniques.
    The machine includes CnCutCum an easy-to-use program for making CNC designs for sinks and kitchen countertops.
    More complex designs can be made with more CAD / CAM experience and knowledge.
    The unique steel frame combined with the compact design allows us to manage each part size without having to take into account the machine tool space (warehouse)
  • CNC Undermount Sink Cutting Machine
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Finishing, Profiling MachinesSink Hole Cutting Machine

    FOB Price:

    Warranty: 12 Months

    Usage: Granite, Marble, Artificial Stone, Basalt

    Machinery Function Features:

    Compact design. Designed for the most ECONOMICAL tools and accessories in mind.
    SMART SOFTWARE – Designer & Machine Operator’s software components are separate.
    Easy to use, very little software training required for machine operators.
  • Red Mill K500 5-axis CNC Milling Robotic Arm Carving Machine
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Finishing, Profiling MachinesStone Carving Robot

    FOB Price:

    Warranty: 12 Months

    Usage: Marble, Limestone, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    The best robotics solution for 5-axis CNC marble machining.
    A mix of power and versatility applied to milling process and sculpting.
    CAD / CAM programming system + 3D simulator.
    Cutting and milling process of: marble, granite and other stone materials.

  • FIXER L-3718 PRO CNC Router & 5 Axis Bridge Cutting Machine
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Finishing, Profiling MachinesCNC Working Center

    FOB Price:€68000-105000

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Onyx, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    5 AXIS CNC BRIDGE CUTTING AND PROCESSING MACHINE. IT HAS A WORKING CAPACITY UP TO 18,000 RPM WITH SIDE MILLING FEATURE. IT ALSO HAS POLISHING FEATURE.
    With Fixer, it is now possible to cut with maximum precision at high speeds.
    Our machine, which has a monoblock body, increases the rigidity and keeps the vibration at a minimum level. Servo motors coupled with backlash-free servo reducers allow you to cut precisely up to 0.1 mm at high speeds. Thanks to the movable table, it makes it easy to place the stone.
    The milling cutter integrated next to the saw motor has added the machining feature as well as cutting. It has made control easier with its 100% native, simple and understandable interface. In the interface working with CNC logic, it is possible to add ready-made drawings as well as the operator can draw himself.
    With the designs integrated into the program for the cuts that are frequently used in the market, you can make the drawing ready by simply entering the dimensions. In addition to these, optional features such as 3500*2000mm processing area (according to 45˚ cut), milling tool change, vacuum, automatic saw-milling measurement, plate measurement, template reading can be included in our machine. Enjoy finishing your work quickly and precisely in one go with Fixer.
  • CNC 5-Axis Water Jet Machine, Waterjet Cutting Machine
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Finishing, Profiling MachinesWaterjet Machines

    FOB Price:$32000-45000

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    1. It can realize 45-degree chamfering and special-shaped cutting. Saw blade cuts straight lines, water jet cuts curves, and can be combined cutting- Increase efficiency by 20%
    2. Automatic loading and unloading can be realized, and the stone type table board can be cut in one time- Save labor costs by 20%, 0 damage to the slabs
    3. Customize the commonly used graphics library, which can be loaded with one key- Increase efficiency by 10%
    4. The purchase cost is lower than the price of a five-axis bridge cutting machine and a five-axis waterjet- Save labor costs by 20%
    5. China's first manufacturing for the machine. The best way for high-end home improvement industry
  • Hot Sale Multifunctional Router Stone Cutting And Engraving Machine
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Finishing, Profiling MachinesCNC Working Center

    FOB Price:$3000-5000

    Warranty: 12 Months

    Usage: Granite, Marble

    Machinery Function Features:

    characteristic:
    1.leading Rack Drive, fast, high efficiency, air-speed can reach 35 m / min or more, against the wave plate is carved in manufacturing can be up to 20 m / min above the speed equivalent to the purchase of 4 -- 5 ordinary type machines. 
    ​2. intelligent protection work table: Prevention of misoperation or software errors, and so on the surface may cause damage. Intelligent processing of cross-border protection: preventing processing format over the layout design of mechanical collision caused the phenomenon. 
    ​3. fully in line with international standards: can use any CAD / ArtCAM software and other relief. 
    ​4. advanced DSP control handle, control automatically processing multiple levels 3 D. To carry out rapid, smooth 3D processing, carving or cutting. Offline operation can be realized. 
    ​5.the overall program structure welding tempering aging treatment, is not strong deformation. Gantry mobile, fixed working table can be arbitrary processing work table material. 
    ​6. suitable for a variety of materials processing large quantities of production.7.Take the water cooling system for marble tool when works for marble ,granite ,stone and so on.

    performance parameter:
    XYZ working area:1300*1500*300mm
    Table size:1310*2000mm
    XYZ travel positioning accuracy:±0.025mm
    XYZ repositioning positioning accury:±0.025mm
    Table surface:Aluminum T slot +PVC
    grantry:steel
    drive system:X-Y axis Rack
    drive system:Z axis Ball screw
    Spindle power:3/5.5KW
    Max velocity:50m/min
    Max working speed:25m/min
    Spindle speed:0-24000rmp
    work mode:step(optional servo)
    Working voltage:AC220/380V
    Command language:G code
    Interface:USB
    Operating system:DSP/Mach3/Ncstudio
    Flash memory:128
    X-Y resolution:0.025mm
    Software environment:Wentai type3 artcam
    Running environment:Temperature:0-45°C
    Paking size:2300*1900*450mm
    Net weight:800 kg
    Gross weight:1000 kg

    Company Information
    Jinan Hopetool CNC Equipment Co.Ltd. is located in Jinan, Shandong Province, China. The company integrates production and trade, and has ten years of production experience. Its main products include CNC routes, laser equipment, etc. All kinds of certificates of the company's products are complete, and we have export certificates, which can be sold all over the world.

    FAQ:
    Q1.How to get the most suitable machine and best price
    ​Please tell the material you want to working on ?
    ​How to working on it ? Engraving ? Cutting ? Or other ?
    ​What’s the MAX size of these material ?( length ? Width ? Thickness ?)
    Q2.What is the payment?
    ​The payment is 30% or 50% T/T or Alibaba trade assurance in advance, balance after machine finished.
    Q3.What is the producing time after order?
    ​The proucing time is about 10-20 days depend on different machines.
    Q4.If we don't know how to use the machine,can you teach us?
    Yes,we will ,if you come to China,we will offer you free training until you can use machine freely.And if
    ​you are busy ,we will have the special engineer to your country,but you need to bear some fee,like
    ​tickets and hotel and meal.
    Q5.How about your after-sales service?
    we offer you 24 hours service phone,skype or whatsapp, our engineer also can go to door install or training.
    Q6. Quality Control:
    The whole production procedure will be under regular inspection and strict quality control. The complete machine will be tested to make sure they can work very well before being out of factory.
    ​The testing video and pictures will be available before delivery.

    How to contact us:
    ​ Telephone: +86-15054105646
    Email: Jackie@Ht-cnc net
    Website: www.ht-cnc.net
    Address: Jinan City, Shandong Province, China

  • CNC Cutting Machine, CNC Carving Machine
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Finishing, Profiling MachinesStone Carving,Engraving Machine

    $10000-20000

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    1. Multi functional in one machine
    2. High cutting accuracy with quite smooth cutting edge
    3. Highest cost effective among all old factories
    4. Reliable aftersales service with sufficient documents, videos,etc
    5. Qualified machine with CE,FDA certification
    6. Major parts are imported with famous brand
  • Honzhan HZ-R1325S Stone CNC Router for Engraving Stone Marble Granite Gravestone
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Finishing, Profiling MachinesStone Carving,Engraving Machine

    $5000-9000

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    Stone CNC Router carving and cutting machine can engrave letter or patterns on natural granite, marble, blue stone, grit stone, crystal stone, soapstone, rock quartz, crystal stone, microlite, all kinds of artificial stone, village tablet, tombstone, milestone, decorating baseboard etc.
    Can make protuberant carving and hollow carving. Engraving depth can reach 200mm.
    Stone cnc router also can engrave and cut Soft metal, aluminum and brass.
    The machine also can work on wood, plastic, PVC, density board, acrylic etc.
  • ASC-3015-ATC CNC Granite Sink Stone Cutting and Polishing Machine
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Finishing, Profiling MachinesSink Hole Cutting Machine

    $21800-21800

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite, Sandstone

    Machinery Function Features:

    The function of stone cutting and polishing equipment is very powerful, you can use a granite CNC machine to cut, dig holes, polish and other operations. And the polishing machine granite is especially suitable for processing stone countertop CNC and sinks. The countertop CNC machine’s 12-position automatic tool changer improves processing efficiency.
    Descriptions Stone Cutting Polishing ATC CNC Machine Parameters
    Model ASC-3015-ATC
    Custom Made
    Working Size 1500*3000mm/5x10ft
    Other size
    Accuracy ±0.03mm
    CNC Router Table Surface Heavy duty steel T-slot table
    Frame Thicken steel Square Heavy structure
    X, Y Structure Gear and rack Transmission
    Z Structure Taiwan TBI Ball Screw
    XYZ Guide rail Hiwin square rail 30mm
    Spindle Power Powerful 5.5KW Mechanical Servo Spindle
    Spindle Speed 0-8,000RPM
    Fast feeding speed XY: 20000mm/min, Z: 8mm/min
    Drive Motors Servo motor and driver
    Way of fixing Workpiece Vacuum cup sucking
    Vacuum pump 5.5kw
    Tool magazine position 10 posion in linear
    Controller system Nc-studio NC 65C
    Working Voltage AC380V/3PH/50Hz
    (option:220V or custom made)
    Command Language G Code
    Software Option: Vectric Aspire, Type3, Ucancam, Artcam, AlphaCam, Powermill, Solidworks,etc.
    Running Environment Temperature: 0℃~45℃
    Relative Humidity: 30%~75%
    Net/Gross Weight 4000kg/4200kg
     BuyCNC
    BuyCNC

    China China

    BuyCNC

    Contact Supplier

  • Stone CNC Router HT-1320 - Stone Carving, Stone Engraving Machine
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Finishing, Profiling MachinesStone Carving,Engraving Machine

    $31637-

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Onyx, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    1.leading Rack Drive, fast, high efficiency, air-speed can reach 35 m / min or more, against the wave plate is carved in manufacturing can be up to 20 m / min above the speed equivalent to the purchase of 4 — 5 ordinary type machines.
    2. intelligent protection work table: Prevention of misoperation or software errors, and so on the surface may cause damage. Intelligent processing of cross-border protection: preventing processing format over the layout design of mechanical collision caused the phenomenon.
    3. fully in line with international standards: can use any CAD / ArtCAM software and other relief.
    4. advanced DSP control handle, control automatically processing multiple levels 3 D. To carry out rapid, smooth 3D processing, carving or cutting. Offline operation can be realized.
    5.the overall program structure welding tempering aging treatment, is not strong deformation. Gantry mobile, fixed working table can be arbitrary processing work table material.
    6. suitable for a variety of materials processing large quantities of production.
    7.Take the water cooling system for marble tool when works for marble ,granite ,stone and so on.
  • DEVA - Portable 3-axis CNC for Stone Carving
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Finishing, Profiling MachinesStone Carving,Engraving Machine

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Onyx, Sandstone

  • Usel Storma Cnc Waterjet Cutting Machine
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Finishing, Profiling MachinesWaterjet Machines

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    Waterjet cutting machines CNC with entegrated KMT or BHDT Pump
    KMT or ALLFI cutting head
    FAGOR CNC Control Unit,
    Fagor servomotors, Digital sercos
    CE certificate
  • Automatic ATC Stone Sink Hole Cutting CNC Machine, Mini ATC Automatic Stone CNC Machine
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Finishing, Profiling MachinesCNC Working Center

    $18000-20000

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    Mini ATC Automatic Stone CNC Machine
    This machine mainly used to do stone countertops sink cutting, sink edge grinding & polishing. It can do any shape, any size stone sink hole cutting, sink edge grinding & polishing, basin in middle type sink hole cutting and so on.
    It adopt ATC automatic tools changing big power main spindle motor, can change tools automatically according different sink processing.
    1. 12 tools storage have automatic stainless steel cover.
    2. Taiwan linear guide rail.
    3. X,Y,Z moving motor is YASKAWA servo motor from Japan, Servo motor driver adopt YASKAWA.
    4. Servo motor reducer adopt Japan reducer motor
    5. 7.5kw ATC spindle motor with tools holder position device.
    6. Frequency converter use positionable converter for tools holder.
    7. NC60A controlling system with Remote control and remote diagnosis.
    8. 12 pieces stainless steel tools holder
    9. The cable line for Servo motor use IGUS from Germany
  • Cnc Milling and Engraving Machines
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Finishing, Profiling MachinesStone Carving,Engraving Machine

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    CNC milling and engraving machines, for milling non-ferrous metals, granite, marble, wood and plastic. Every machine is manufactured according to the expectations of our customers.
    Whether prototyping, equipping a training center, furniture construction or natural stone processing, with our machines it is possible.
    With Millingcenter you have the right partner at your side to increase your productivity.
    All services from a single source, from sales to service.
    In addition to the machines, you will receive machine accessories and tools from us.
    Many customers appreciate the safety and ease of use of our machines. More productivity, less wear.
  • HQ1690 CNC Laser Engraving Machine For Marble Stone Granite Tombstones
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Finishing, Profiling MachinesStone Carving,Engraving Machine

    $5000-10000

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    Application Industry and materials:
    All kinds of stone processing industry, marble, granite, tombstone, gravestone, headtone and so on.
    Advantage:
    The wagon can hold heavy stone and can be lifted up or down easily. The wagon can be moved flexibily to any direction according to the engraved marble.
    Technical Data:
    Laser Style: CO2 Sealed-Off Laser Glass tube, water-cooled
    Laser power: 80/100/120W
    Engraving size: 1600 * 1000mm
    Engraving speed: 0-60000mm/min
    Power supply: AC220V/50HZ AC110/60HZ
    Total Power: <1000W
    Operating temperature: 0-45 degree
    Operating Moisture: 5-95%
    Min. cutting character: English letter: 1.0 * 1.0mm
    Available Picture Format: BMP, PLT, DST, DXF, AI
    Supporting Software: CorelDraw, PhotoShop, AutoCAD,TAJIMA
    Driving System: 2 phases stepper motor
    Machine Dimension: 1320 * 1000 * 1050mm
    Packing Dimension: 2200 * 1200 * 1100mm
    Net Weight: 180kg.
  • S1325B STONE CNC ENGRAVING ROUTER MACHINE FOR SALE
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Finishing, Profiling MachinesStone Carving,Engraving Machine

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    Chencan S1325B is standard stone engraving machine with heavy duty design, we offer customer-designed service, you just need to tell us your requirements or the workpiece size, materials and we’ll give our suggestion.



    Features



    •3 axis with dust proof;

    •4 wheels on the front of the table, make the load heavy stone easy;

    •With wheels in front for easy put on material;

    •#25 Taiwan Linear guide and high precision ball screw;

    •Water tank with water cooling sprayer to cool the tool when working;

    •Table Structure and T-slot table with 25mm hard PVC;

    •Transmission system: X,Y axis Gear Rack and z axis Ball screw from Taiwan but with German technology;

    •Lead rail system: Taiwan Linear round guide rail;
  • CNC Water Jet Cutting Machine
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Finishing, Profiling MachinesWaterjet Machines

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Onyx, Artificial Stone

    Machinery Function Features:

    Water jet Machine uses cold supersonic erosion to provide through cut in almost any materials both metals and nonmetals. The highly pressurized water stream is forced through a tiny area which carries abrasive garnet to erode away the material.

    ADVANTAGE OF WATERJET TECHNOLOGY:
    1)Cold Cutting without thermal influences.
    2)Material saving production due to reduced cutting width.
    3)Flexible processing of all virtually material with consistent high quality.
    4)Tension-free processed parts due to minimal cutting force.
    5)Environment friendly & clean production without poisonous gas.
    6)Close linking with the CAD/CAM programming system.
    7)High productivity through multi head cutting system & multi layer cutting.
    8)High-Performance drive system, which permit high-precision production of parts as well as the highest processing speed.
  • L-3015 Plus Cnc Router
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Finishing, Profiling MachinesStone Carving,Engraving Machine

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Basalt, Quartzite

    Machinery Function Features:

    FEATURES L-3015 PLUS MACHINE SERIES
    NET WORKING AREA 3000X1500X400 MM
    CHASSIS TYPE SQUARE PROFILE IRON CHASSIS
    SPINDLE MOTOR HITECO
    SPINDLE MOTOR POWER 11 KW
    SPINDLE CYCLE 24000/18000
    SPEED CONTROL 2.2 / 5 KW.
    DRIVE MOTORS SERVO / HYBRID / OPTIONAL
    X / Y / C / B AXIS MECHANICAL LINEAR RAIL, HELICAL GEAR
    Z AXIS MECHANICAL COMPONENTS LINEAR RAIL, SCREW SHAFT
    CNC CONTROL SYSTEM SINTEC UNIT
    TABLE TYPE GALVENIZ STAINLESS TABLE
    PROGRAM SENSITIVITY 0.01 MM
    COOLING SYSTEM AUTOMATIC WATER COOLING
    PANO PROFESSIONAL INDUSTRIAL TYPE PANEL
    TOOL HOLD TYPE ER25 / ER32
    WORKING CODE SYSTEM STANDARD ISO G CODE
    SAFETY SYSTEM ELECTRONIC SENSOR
    CONTINUES FROM THE LOCATION IN CASE OF ELECTRIC FAILURE
    ELECTRICAL EQUIPMENT AT CE NORMS
    COMPACTION SYSTEM PYNOMATIC
    TOOL CHANGE
  • Northwood CNC Router
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Finishing, Profiling MachinesStone Carving,Engraving Machine

    Warranty: 12 Months

    Usage: Marble, Limestone, Quartzite

    Machinery Function Features:

    The machine above has a 20-position, Dynamic Tool Changer, 1.25 diameter steel Part Location Stops, and a Trespa Matrix Fixture table. Matrix tables are available in several materials including aluminum and can include many integrate options. This front to back design allows for easy loading and unloading by allowing access to three sides of the work envelope.For dust and chip collection, Northwood offers a dust hood with up to 10" outlet that is capable of significantly reducing airborne particles and can tie directly into existing shop collection systems or Northwood can supply a collection system for full shop setup.
    The FANUC name is synonymous with quality and reliability, both in Controls AND Robotics - a Mean time Between Failure (MTBF) of over 100,000 hours, and this is based upon empirical data and testing, not guestimates and projections
  • CNC stone line machine
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Finishing, Profiling MachinesEdge Profiling, Polishing Machine

    Warranty: 12 Months

    Usage: Granite, Marble

    Machinery Function Features:

    CD2018 CNC stone line machine, the machine is equipped with 8 sets of high precision and high load spindle, 8 groups of independent CNC system, the power is more powerful. The machine used alone, can be used (2 groups forming +6 group (Group 3 polishing) or molding group +5 polishing) mode, forming of medium and small quantities of all kinds of stone processing lines more convenient, fast and polished, high processing efficiency, better product quality, when the enterprise also has CD2016 and CD2018 two CNC stone line machine, combined use of all kinds of stone processing lines, stronger applicability and higher productivity.



    CD3010 CNC stone line machine is our company according to the present situation and the development trend of stone processing industry, for the many stone line manufacturers carefully designed, carefully built practical new type of stone line production equipment.
  • Mavijet 6 Axis Gantry Type Cnc Milling Machine (Simultaneous)
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Finishing, Profiling MachinesCNC Working Center

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    Bridge Type 6 axis Waterjet Machine is manufactured as full integrated with dividing system 2.1 Nm servo motors
    Servo motor, linear sledge and vehicles, helical rack and pinions is used for providing a rapid and smooth axial movement. The linear slides and rails, helical rack and pinions in all systems are protected with automatic greasing pump in order to prevent rust and to continue sensibility.
  • Farnese ALEXIA Gen2 CNC Working Machine
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Finishing, Profiling MachinesCNC Working Center

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite

    Machinery Function Features:

    The ALEXIA automates the cutting, drilling and polishing of sink cutouts and is the ultimate answer to affordable stone processing without compromising on quality. The machine has automatic tool changing with 23 stations.
    The Best feature of the ALEXIA is its user-friendly interface, the Software has been designed for MS Windows and is intuitive and simple to use. It is pre-loaded with common sink templates listed by brands including Oliveri, Franke, Clark and Blanco. Further other sinks sizes and shapes can be easily created using the parametric section extending the machine's cutting capabilities.
    The ALEXIA has the ability to connect directly to the internet which allows our office to log into your machine and help you with further training and troubleshooting. Another key feature is its small footprint taking up minimal area in the workshop.
    Flat drain boards can be programmed in relation to the sink cut-outs selected. The length, width and radii adjusted relatively to the chosen sink cut out as well as the depth of recess.
    Inclined drain grooves can be cut either onto the bench top or incorporated into the polished flat drain board. The width of the grooves are dictated by the tooling selected. The length is inputted on 'grooving' selections and is in relation to and in proportion with, the centre of the sink cut out.
    In addition to this the Alexia can also perform edge profile work ( eg. Lambstongue, bullnose etc.) subject to tools selected .These can be supplied at additional cost to standard tooling provided.
    The Team at Farnese Australia understands that buying stone machinery is an important decision, one that can be extremely costly when breakdowns occur and equipment doesn't run to its capability. That's why we provide our customers with unparalleled service and support for all our machines throughout Australia and New Zealand. From on-site installation and training to after-sales telephone and in person support and repairs, our professional sale and service team will keep your valuable asset running.
  • Master 23 Work Centre CNC Carving Machine, CNC Profiling
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Finishing, Profiling MachinesCNC Working Center

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Artificial Stone, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    PC controlled work centre, Master 23 is Intermac’s new proposal dedicated to the stone processing. The careful analysis of the commercial and technical requirements filtered by Intermac experience, have brought to the intuitive conception of an easy operating machine, where the numerical control is completely integrated into the PC structure with Windows XP, that allows an automatic machine management and high configurability. Thanks to its high technology and flexibility, Master 23 can be adapted to the specific productive and economic requirements of the client and offers the possibility to select between different configurations. It satisfies the requirements of big enterprises and little craftsmen through the optimum management whether of the complex and long duration installations, whether of the short installations dedicated to the production of large series, reaching high quality results with a reduced investment.
    A COMPACT SOLUTION FOR EVERY NEED
    The Master 23 is the most compact machining center created by Intermac for the machining of stone. It is suitable for the needs of large companies that need to produce large batches, but also for small artisans who decide to invest in the growth of their company and in the evolution of the production process.
    INTERMAC TECHNOLOGY
    The high technological content of the world's most popular working centers satisfies the specific needs of the stone industry. Configurations with 3 or 4 axes fitted with aggregates for managing a vast range of machining operations. For all the configurations, the components are the same as for the top-of-the-range solutions.
  • Double-Spindle Stone CNC Stone Carving, Engraving Machine Factory Price
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Finishing, Profiling MachinesStone Carving,Engraving Machine

    $10000-20000

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    1). 2 sets of water-cooling spindle
    2). Water rank table
    3). Heavy duty machine structure
    4). One year warranty
    5). CE, ISO9001 certificate
    Main Features:
    1). Strong machine structure welded by thick square tubes, excellent stability with no deformation;
    2). The cnc stone carving machine takes high-speed water cooling spindle and high performance subdivision driver ensure to work stably for long time;
    3). Intelligent protecting to prevent the damage caused by wrong operation and crush caused when the pre-set working area is larger than actual working area;
    4). This Double-spindle stone carving machine has excellent compatibility with CAD/CAM software e.g. Type 3/Artcam/MasterCam/Wentai, etc;
    5). Break points and power off memory way ensure the continuous working in case of tool breaks or work stops;
    6). working table with water tank and double water cooling system, excellent cooling performance for tools and products;
    7). High precision rack and pinion for X/Y axis and ball screw for Z axis, high precision and long life time;
    8). Dust proof and water proof system ensure a high running accuracy and .an excellent working environment;
  • GSY-3015A CNC Router, Cutting Machine, CNC Machining Center
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Finishing, Profiling MachinesCNC Working Center

    $17755-19999

    Warranty: 12 Months

    Usage: Granite, Marble, Artificial Stone

    Machinery Function Features:

    Technical parameters
    Model GSY-3015A
    X/Y/Z Axis working size 3000*1500*430mm
    Working table
    Aluminum profile with T-slot and water tank
    X/Y/Z Axis transmission
    X/Y Axis helical Gear and rack, Z Axis Ball screw
    spindle power
    ATC spindle 7.5KW(optional)
    Max spindle speed 8000rpm
    ATC type and capacity Linear ATC, 12 tools
    Driver motor servo
    Control system GANGER
    Gross weight 3500KGS
  • Countertops CNC waterjet cutting machine
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Finishing, Profiling MachinesWaterjet Machines

    $39999-59999

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    CNC waterjet cutting machine for marble / porcelain/ Sintered stone countertops cut.
    Max.cutting size 40000*2000mm
    Max. working pressure 3600bar
    Max.Flow rate 3.7Kw
    60K intensifier pump with power rate 37Kw/50hp
    Auto CNC driving system of YASKAWA
    One of the most powerful controller: Beckoff
    With Laser mapping
    With Pre cutting cost report estimate
    Hydraulic loader for large sheets safe and easy loading
  • CNC water jet cutting machine for stone cutting marble grani
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Finishing, Profiling MachinesWaterjet Machines

    $24500-30000

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    EAAK CNC water jet cutter application:

    The cutting materials are not limited (such as stainless steel,carbon steel,copper,brass,aluminum and other metal,glass,stone,marble,granite,foam,ceramics,plastics,composite materials...), waterjet cutting is currently the most applicable cutting method;

    Metal cutting:

    1 Decoration of stainless steel,aluminum.iron,brass and other metal cutting process.

    2 Manufacture of machinery and equipment control cabinets such as food machinery,medical machinery,CNC machinery.

    3 The metal parts cutting such as stainlesssteel flange,semi-finished,steel construction, non-ferrous metal and so on.

    Glass cutting:

    1 Gas stove surfaces, range hood,disinfecting cabinet, TV, bathroom products.

    2 Construction and decoration glass,automotive glass.

    Ceramic and stone cutting:

    1 Ceramic cutting for decoration and construction.

    2 Marble mosaic,granite mosaicmstone plate cutting.

    Specification of EAAK CNC waterjet cutter machinery:(as follows)

    Model EK2030

    X Y axis Working size 2000mm*3000mm

    Z working height 150mm

    Cutting Pressure 380Mpa 30kw UHP pump

    Control accuracy 0.01mm

    Cutting accuracy 0.1-0.2mm

    Repositioning Accuracy 0.05mm

    Max cutting thickness 300mm(depends on materials)

    Max. moving speed 6000mm/min

    Power supply 380V 50Hz

    Environmental temperature -10-50°C

    Max flow rate 3.7L/min

    Max oil discharge 206L/min

    Max delivery capacity of oil pump 106L/min

    Control system Ncstudio (Shanghai) software IPC controller

    CAD/CAM software AutoCAD,ArtCAM

    Drive motor Japan Yaskawa servo drive motor
  • HQ7050 CNC Laser Engraving Machine Engraver Stone Etching Machine
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Finishing, Profiling MachinesStone Carving,Engraving Machine

    $3000-4000

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    Application Industryn:
    All kinds of stone processing industry, advertisement processing industry, embroiders cotton business, the apparel industry, the shoe manufacture industry, the trademark processing industry, the craft present industry and so on.
    Suitable materials:
    all kinds of stones, like granite, marble, Plexiglas, the cotton material, the rubber, the acrylic, the cardboard, the leather, embroider, the wood and bamboo sign, the paper product.
    Technical Index:
    Laser Type: CO2 Sealed-off laser glass tube, water-cooled
    Laser Power: 60/80/100W
    Cutting Size: 700 * 500mm.
    Engraving Speed: 0-60000mm/min
    Min.cutting character: English letter: 1x1mm
    Max. Scanning Accuracy: 2500DPI
    Positioning Accuracy: < /-0.01mm
    Supporting Figure Format: DSTPLTBMPDXFAI
    Supporting Software: CORELDRAWPHOTOSHOPAUTOCADCADTAJIMA.
    Color Separation: Yes
    Driving System: 2 phases stepper motor
    Machine Size: 1320*1000*1050mm
    Packing Size: 1420*1010*1100mm
    Power Voltage: 220V, 50HZ/110V/60HZ
    Net Weight: 180kg.
    Optional Parts: Up-down worktable, USB Port, Red light pointer, Autofocus
  • Honzhan HZ-R6090 Advertising Wood Acrylic CNC Router Carving Machine 600*900mm
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Finishing, Profiling MachinesStone Carving,Engraving Machine

    $2500-5000

    Warranty: 12 Months

    Usage: Granite, Marble, Artificial Stone, Quartzite, Sandstone

    Machinery Function Features:

    Applicable industry and materials of 6090 cnc router:
    Suitable for advertising, photo frame making, double color board signs, department cards, badges and architectural models, ABS board, acrylic engraving and cutting, engraving of various jade articles, also can engraving aluminum, brass, marble and other items.
    HZ-R6090 CNC Router machines are excellent choice for small shops and can work on many applications at a low price.
  • ASC-3015-MTC CNC Stone Cut Router, CNC Design Granite Cutting Machine
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Finishing, Profiling MachinesStone Carving,Engraving Machine

    $8700-8700

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    This Stone CNC Machine Which is also as a Granite Cutting tool can be used to cut granite, marble, and other stones. At the same time, as a Stone Design Machine, it can carry out various operations such as engraving, engraving, and punching on the stone. It is a very cost-effective stone CNC Router
    Descriptions Stone Design Machine Granite Cutting Tools Machine Parameters
    Model ASC-3015-MTC
    Custom Made
    Working Size 2500*1300*300mm
    3000*1500*300mm
    Other size
    Accuracy ±0.025mm
    Stone CNC Machine Table Heavy duty steel T-slot table
    Stone CNC MachineFrame Thick steel machine frame
    X, Y Structure X/Y Helical German rack and pinion
    Z Structure Z High precision TBI ball screw
    XYZ Guide rail XYZ Axis HIWIN Square Rail
    Spindle Power Powerful 5.5KW Water Cooling Spindle
    Max. Rapid Travel Rate 30,000mm/min
    Max. Working Speed 20,000mm/min
    Drive Motors Yako or Leadshine
    Way of fixing Workpiece Vacuum cup sucking
    Operating System Mach 3
    Working Voltage AC380V/3PH/50Hz
    (option:220V or custom made)
    Command Language G Code
    Software Option: Vectric Aspire, Type3, Ucancam, Artcam, AlphaCam, Powermill, Solidworks,etc.
    Stone Design machine Running Environment Temperature: 0℃~45℃
    Relative Humidity: 30%~75%
     BuyCNC
    BuyCNC

    China China

    BuyCNC

    Contact Supplier

  • CNC Engraving Machine For Stone
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Finishing, Profiling MachinesStone Carving,Engraving Machine

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    number Description parameter
    1 XYZ working area 1200*1200*150mm
    2 Table size 1300*1500mm
    3 XYZ travel positioning accuracy ±0.01mm
    4 XYZ repositioning positioning accury ±0.01mm
    5 Table surface Aluminum molding
    6 Lathe structure Cast iron
    7 drive system X-Y axis Ball screw
    8 drive system Z axis Ball screw
    9 Spindle power 2.2KW
    10 Max velocity 8m/min
    11 Max working speed 6m/min
    12 Spindle speed 0-24000rmp
    13 work mode Stepper
    14 Working voltage AC220V
    15 Command language G code
    16 Interface USB or parallel port
    17 Operating system Ncstudio/DSP/Mach3
    18 Flash memory 128
    19 X-Y resolution ﹤0.025mm
    20 Software environment Ucancam, Type3, Artcam
    21 Running environment Temperature:0-45℃
    22 Paking size 1480*1650*1350mm
    23 Net weight 300kg
    24 Gross weight 350kg
  • T-405 Torna Cnc Touter Carving Machine
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Finishing, Profiling MachinesStone Carving,Engraving Machine

    Warranty: 12 Months

    Usage: Granite, Marble

    Machinery Function Features:

    Description
    ÖZELLİKLER T-405 TORNA MODÜL SERİSİ
    ŞASE TİPİ KARE PROFİL DEMİR ŞASE 10MM
    SPİNDLE MOTOR ALDEMİR
    SPİNDLE MOTOR GÜCÜ 15 KW
    SPİNDLE DEVRİ 24000/18000
    HIZ KONTROL 2.2/5 KW.
    HAREKET MOTORLARI SERVO
    X/Y EKSENİ MEKANİK LİNEER RAY, 35MM
    Z EKSENİ MEKANİK AKSAM –
    CNC KONTROL SİSTEMİ DSP
    TABLA TİPİ –
    PROGRAM HASSASİYETİ 0,01 MM
    SOĞUTMA SİSTEMİ OTOMATİK SU SOĞUTMA
    PANO PROFESYONEL ENDÜSTRİYEL TİP PANO
    TAKIM TUTMA TİPİ –
    ÇALIŞMA KOD SİSTEMİ STANDART ISO G KODU
    EMNİYET SİSTEMİ ELEKTRONİK SENSÖR
    ELEKTRİK KESİNTİSİNDE KALDIĞI YERDEN DEVAM EDER
    ELEKTRİK DONANIMI CE NORMLARINDA
  • HQ1810 CNC Co2 Laser Engraving Machine For Tombstones Etching
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Finishing, Profiling MachinesStone Carving,Engraving Machine

    $4000-6000

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    Laser power: 150/180/260/300/400W
    Laser Type: CO2 Sealed-off Glass-tube laser
    Power supply: AC 110V-220V+10% /50-60Hz
    Max. Engraving size: 1800 * 1000mm
    Engraving speed: 0-500mm/sec.
    Cutting speed: 0-300mm/sec.
    Platform: Up-down platform/Fixed platform
    Locating Precision: <0.01mm
    Repeat locating precision: 0.01mm
    Total power: <1200W
    Min. shaping character: Character: 2*2mm, Letter: 1*1mm
    Driving System: Stepper Motor
    Cooling System: water-cooling and protection system
    Water-break protection: Yes
    Graphic Format Supported: CorelDraw, AutoCAD, Photoshop
    File Format Supported: BMP, CIF, JPEG, TGA, TIFF, PLT, AI, DXF, DWG etc
    Auto Feeding System: Yes, continuous cutting and engraving.
    Machine size: 2280*1430*1120mm
    Packing size: 2380*1530*1200mm
    Gross weight: 400kgs
  • POSEIDON VECTOR 3 CNC MACHINE
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Finishing, Profiling MachinesCNC Working Center

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Sandstone, Travertine

  • M-1020 Cnc Router
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Finishing, Profiling MachinesStone Carving,Engraving Machine

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    SPECIFICATIONS M-1020 MACHINE SERIES
    NET WORKING AREA 2000X1000X300 MM
    CHASSIS TYPE SQUARE PROFILE IRON CHASSIS 10MM
    SPINDLE MOTOR HERTS / AREL
    SPINDLE MOTOR POWER 2.2 / 5 KW.
    SPINDLE CYCLE 24000/18000
    SPEED CONTROL 2.2 / 5 KW.
    DRIVE MOTORS HYBRID SERVO / SERVO / STEP
    X AND Y AXIS MECHANICAL PARTS LINEAR RAIL, HELICAL CREMAYER GEAR
    Z AXIS MECHANICAL COMPONENTS LINEAR RAIL, SCREW SHAFT
    CNC CONTROL SYSTEM DSP PANEL / MACH3 / SİNTEC / ARTCEM
    TABLE TYPE GALVENİZ STAINLESS TABLE
    PROGRAM SENSITIVITY 0.01 MM
    COOLING SYSTEM AUTOMATIC WATER COOLING
    PANO PROFESSIONAL INDUSTRIAL TYPE PANEL
    TOOL HOLD TYPE ER25 / ER32
    WORKING CODE SYSTEM STANDARD ISO G CODE
    SAFETY SYSTEM ELECTRONIC SENSOR
    CONTINUES FROM THE LOCATION IN CASE OF ELECTRIC FAILURE
    ELECTRICAL EQUIPMENT AT CE NORMS
    COMPACTION SYSTEM PYNOMATIC
  • 2 Spindle Marble CNC Cutting Engraving & Polishing Machine- CNC Working Center
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Finishing, Profiling MachinesCNC Working Center

    $15000-30000

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Sandstone, Travertine

    Machinery Function Features:

    Table type: Steel board+Aluminum board
    Control system NC-studio control system
    Software UCANCAM,JDpaint software
    Command G Code (plt, mmg, uoo, bmp)
    Driving Motor servo motor
    Transmission X,Y Axis High Precision Rack Gears, Z Axis Ball Screw
    Guide rail Taiwan Linear Square Guide Rail 30mm
    1). Strong machine structure with water tank
    2). Water-cooling spindle of different power options
    3). Cutting, engraving, polishing, etc
    4). One year warranty
    5). CE, ISO9001 certificate
    Marble Stone CNC Cutting Engraving and Polishing Machine Center for Sale
    Main Features:
    1). This marble engraving machine has strong machine structure welded by thick square tubes, excellent stability with no deformation. High precision rack and pinion for X/Y axis and ball screw for Z axis, high precision and long lifetime;
    2). The stone engraving machine takes high-speed water cooling spindle and high-performance subdivision driver ensure to work stably for a long time;
    3). UncGraphics. NX3.0, Mastercam9.0 other software, set the CAD/CAM as a whole, through digital analysis, design, the product was processed to support procedural pre/igs/scep/dxf/dwp and other documents;
    4). Vertical-type ATC system makes the whole process from the hole, cutting, shaping and polishing to a variety of milling processes go, the full realization of a high degree of automation;
    6). Break-point memory and power off continuous engraving functions;
    7). different kind of processing works can be done, such as polishing for backsplash, former anomalous edge, cutting and polishing water tap hole through the automatic tools changing.
  • 1325 CNC Router Marble Stone Granite Wood MDF Engraving Cuting Machine
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Finishing, Profiling MachinesStone Carving,Engraving Machine

    $10000-20000

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    Model No.: HQ1325 CNC
    Working size: 1300*2500*200MM
    Machine frame: Large metal squared tube welding frame
    Beam: Steel gantry
    Wire cabinet: Separate control cabinet
    Table: Heighten platform+vacuum table+5.5KW vacuum bump
    X Y Z Guide Rail: Square Rail from Taiwan Hiwin
    X Y Transmission: German WMH Herion rack
    Z Transmission: Taiwan TBI 2510 Ball Screw
    Spindle Motor : 6KW spindle cooling by air
    Converter: BEST
    Control System: NcStudio system Or DSP
    Position: 3+2 positioning air bump
    Oil filling: Automatic
    Dust collector: 3.2KW duo vacuum cleaner
    Motor: Leadshine servo motor
    Driver: Leadshine servo driver
    Packing Dimension:3.26*2.2*1.99M
    Gross Weight: 1100KGS
    Application:
    Mainly used for production of closet doors, solid wood processing, furniture, etc.
    Also can be used for cutting and production of MDF.
    NEW
  • FIXER L-3718 PRO CNC Router & 5 Axis Bridge Cutting Machine
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Finishing, Profiling MachinesCNC Working Center

    €68000-105000

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Onyx, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    5 AXIS CNC BRIDGE CUTTING AND PROCESSING MACHINE. IT HAS A WORKING CAPACITY UP TO 18,000 RPM WITH SIDE MILLING FEATURE. IT ALSO HAS POLISHING FEATURE.
    With Fixer, it is now possible to cut with maximum precision at high speeds.
    Our machine, which has a monoblock body, increases the rigidity and keeps the vibration at a minimum level. Servo motors coupled with backlash-free servo reducers allow you to cut precisely up to 0.1 mm at high speeds. Thanks to the movable table, it makes it easy to place the stone.
    The milling cutter integrated next to the saw motor has added the machining feature as well as cutting. It has made control easier with its 100% native, simple and understandable interface. In the interface working with CNC logic, it is possible to add ready-made drawings as well as the operator can draw himself.
    With the designs integrated into the program for the cuts that are frequently used in the market, you can make the drawing ready by simply entering the dimensions. In addition to these, optional features such as 3500*2000mm processing area (according to 45˚ cut), milling tool change, vacuum, automatic saw-milling measurement, plate measurement, template reading can be included in our machine. Enjoy finishing your work quickly and precisely in one go with Fixer.
    NEW
  • 20Tons CNC Hydraulic Stone Splitter For Making Wall Claddings
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Finishing, Profiling MachinesMosaic Cutting Machine

    $4000-6000

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Artificial Stone, Sandstone

    Machinery Function Features:

    Model MS-20K/MS-40K
    Splitting force(T) 20/40
    Max. Splitting Width (mm) 300
    Max.Splitting Height (mm) 100
    Length of blade(mm) 300
    Power Supply Hydraulic,4kw/5kw
    Motor of conveyor 12N/m
    Max splitting width(mm) 300
    Max splitting height(mm) 100mm/150mm
    Min splitting height(mm) 20mm
    Production capacity 200-300m2/8 hours
    Tank capacity 30L/45L
    Overall Size(cm) 1830*1100*1670mm
    Weight (kg) 500/580
    NEW
  • Professional Best Price Stone Engraving Carving Machine CNC Router
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Finishing, Profiling MachinesStone Carving,Engraving Machine

    $4000-8000

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    1. Ball screw for Z axis.It's stable running,precision and fast.
    2. X,Y axis are gear rack,steady rate transmission,fast speed and high efficiency.
    3. With NC studio or Mach 3 control systerm,easy to learn design software,just install it onto your computer and start creating patterns.
    4. Powerful 5.5kw water cooling spindle,perfect working for stone carving.
    5. The rotary is put on the table and the Z axis space is enlarge to give enough working area for Z axis.Rotary cnc router take extra jobs for removing but save width.
    6. Heavy duty frame and gantry,very strong and stability.
    NEW

Have a Question? Ask our expert

FAQ icon
Ask now
Clear All
Compare (0/4)
StoneContact
loading
Tips

Tell Suppliers what you want to buy

Tips

Submitted successfully, thank you!