Artificial Stone Cutting and Splitting Machine

Fully independent research and development, design, production, can be customized according to the special needs of users.
Adopt HD industrial display screen, aluminum alloy profile shell, explosion-proof, dustproof, super long service life. Ultra wide viewing Angle and ultra high display brightness.
Description
Fully independent research and development, design, production, can be customized according to the special needs of users.
Adopt HD industrial display screen, aluminum alloy profile shell, explosion-proof, dustproof, super long service life. Ultra wide viewing Angle and ultra high display brightness.
Specially developed 6mm thick 6061 high strength industrial aluminum beam to remove internal stress, to ensure the service life and load-bearing capacity of aluminum beam, large milling machine processing installation surface, to ensure the perpendicularity and straightness of the installation surface, improve the accuracy
Adopt high strength national standard carbon steel, robot full welding process, the whole body heat treatment, stress removal aging treatment, to ensure the body stability and flatness
Dual drive servo motor with high horsepower, the machine ensures high precision while cutting at high speed, adopt Italian special cutting head for rock slab
Features
Laser automatic positioning, graphic scanning, automatic labeling, straight line & special-shaped cutting, high cutting precision, fast cutting speed, long service life, no consumables
Application
It can be applied to the following areas:
Building decoration, craft home decoration, cabinet furniture

LG-4T CNC Four Head Hole Cutting and Grinding Machine is a new type of fully automatic control equipment, mainly used for drilling, sink hole cutting and grinding of natural stone slabs, artificial stone and other artificial stone material countertops. The equipment automatically locates with high precision, realizes the drilling, cutting and polishing of the slab at one time, and the tool automatically sets various R edges. The device has automatic picture reading function and programming function, without the cumbersome process of traditional drawing software. It can realize single-station and double-station processing, greatly improving production efficiency and quality effects, standard size, no dust, no pollution, and greatly reducing labor costs.

Split the stone composite slab into 2 pieces. Various size.

The Yongtao brand of YTQZ-3200 3 axis bridge type CNC sintered stone cutting machine is designed for processing sintered stone. It adopts touch screen CNC control to adjust cutting size. Differ with normal stone cutting machine, it has the advantage of high precision, fast cutting speed, good cutting effect is good, simple operation for processing sintered stone.
The cutting speed is one times faster than normal stone bridge saw. It use high speed motor, large size saw blade, imported precision lead screw, can effectively achieve cutting accuracy, ensure that the cutting size without error. Using infrared sensing, it has good effect on straightness cutting. Using special saw blade for sintered stone cutting, cutting effect than normal stone cutting saw blade. The max cutting size is 3200mm*1800mm, for processing large specifications of sintered stone, this CNC sintered stone cutting machine is your best choice.
CNC Sintered stone cutting machine Processing characteristics:
1, gantry structure design, better stability;
2. The platform adopts soft material as the bottom plate to avoid edge collapse and Angle drop after cutting;
3. The control cabinet adopts rocker arm structure, which makes the operation more flexible and convenient;
4. The outer part of lifting tool head adopts iron sheet spray paint, and there is iron sheet water cover at the installation blade to avoid sewage entering the motor;
5, Front and back moving screw, using imported precision screw, can effectively ensure the cutting precision and durability;
6. Hydraulic cylinder is used to support the lifting of the whole platform, which is convenient for placing and unloading plates;
7. The beam of the cutting machine adopts cast iron structure and is wrapped with dust cover to avoid dust and debris entering the girder and prevent accidents.
8. Infrared induction is set at the cutting place, which can effectively ensure the straightness of cutting;
Processing materials: sintered stone, large size ceramic, ceramic sheet, stone

ML-CNC 2508-3 Double Station Artificial Quartz, Sintered Stone, Porcelain Cutting, Drilling, Profiling Machine is a professional equipment for processing quartz stone, terrazzo, sintered stone, porcelain slabs. It is the most advanced artificial stone countertop tapping machine in China.

Laser automatic positioning, graphic scanning, automatic labeling, straight line & special-shaped cutting, high cutting precision, fast cutting speed, long service life, no consumables
Fully independent research and development, design, production, can be customized according to the special needs of users.
Adopt HD industrial display screen, aluminum alloy profile shell, explosion-proof, dustproof, super long service life. Ultra wide viewing Angle and ultra high display brightness.
Specially developed 6mm thick 6061 high strength industrial aluminum beam to remove internal stress, to ensure the service life and load-bearing capacity of aluminum beam, large milling machine processing installation surface, to ensure the perpendicularity and straightness of the installation surface, improve the accuracy
Adopt high strength national standard carbon steel, robot full welding process, the whole body heat treatment, stress removal aging treatment, to ensure the body stability and flatness
Dual drive servo motor with high horsepower the machine ensures high precision while cutting at high speed, adopt Italian special cutting head for rock slab
It can be applied to the following areas:
Building decoration, craft home decoration, cabinet furniture

1、Quality Material
JTM use high strength steel to weld the body of the cutting machine to make sure the machine is strong enough.
2、Easy Operation And Maintenance
The cutting machine is with very simple design, so the operation and maintenance of the machine are simple and convenient。
3、High Efficiency And High Adaptablity
JTM edge cutting machine is one of the most efficient cutting machine can cut thousands of slab per day. Also the length and width of the cutting balde is adjustable to cut slab with different size.
4、Automation
PLC controlled automatic cutting machine.

Multi-function Manual Cutting, Mainly for small size, Small quantities of brick cutting, Trimming, Slotting, Chamfer, Rounded edges. Machine investment cost is low, Easy to operate, Running balance, No vibration, Is the best partner for store or site.

Cutting sizes from 150mm to 3200mm
Splitting sizes from 200mm to 3200mm
Up to 8 powered heads – 6 fixed engraving heads.
Machine to obtain sub-sizes through splitting.
The machine can operate in two modes and meet a wide range of production needs:
Pre-cut + engraving: the tools equipped with discs make partial cuts on the bottom; subsequently, incipient fractures are made on these cuts by means of engraving heads.
Engraving: is carried out only by means of engraving heads so as to make incipient fractures directly onto the original surface of the material. The above operating mode can only be applied to smooth, even surfaces, free of internal tensions.
Pre-cutting and engraving head:
Powered cutting unit with electric spindles with fixture for cutting discs. At the base of each cutting head is mounted a bar with press rolls that hold in line the material during machining, absorbing the stresses transmitted by the tool.
The idle heads have the opportunity to bring two different types of engravers, one with a greater diameter for smooth or one with a smaller diameter, used for efficiently engraving even uneven surfaces.
Roller splitting:
The machine is used to split ceramic slabs along one or more incipient fractures made previously. The slab is split without stopping its forward motion along the line.
The slab, carried by a conveyor belt, passes through 3 cross rollers with independent adjustment systems, placed two above and one below the conveyor belt to create a condition of interference which causes the rupture along the incipient fracture lines.
Engraving and cutting with automatic dynamic tile centering device with pneumatic actuator and handwheel adjustment.
Splitting unit consisting of 2 upper rollers with horizontal position adjustment system made up of electric jacks that adjust the machine for cutting slabs of different sizes. 1 bottom roller with vertical adjustment system made of a manual jack that adjusts the machine for cutting slabs of various thicknesses.

Sizes from 150mm to 1200mm
Up to 3 cutting heads
High productivity also with difficult products (eneven surfaces, stressed materials) thanks to disk pre-cutting.
Small pitch between cuts thanks to the vertical motor arrangement.
Automatic disk lifting with height adjustment setting.
Motorized multi-scoring
Multi-scoring with motorized pre-cutting in just one transverse working stroke.
Up to three simultaneous scorings with pre-cutting at each stop.
Integrated continuous splitting cycle in one compact structure
Reduced overall dimensions of in line scoring-splitting system (-60% with respect to a continuous scoring line).

Sizes from 200mm to 3300mm
Up to 16 cutting heads
Automatic format change
Cutting system with multiple discs for the execution of longitudinal and transversal cuts on large slabs and high thicknesses.
By means of a variable number of cutting discs, positioned with great accuracy by a CN, it is possible to produce sub-formats and strips.
Perpendicularity of the cuts
Motion on belt
The slabs move forward on belts that run on interchangeable wear-resistant steel plates. Replacement of the belt is facilitated by the special structure of the base.
Pneumatic centring and alignment devices ensure perfectly perpendicular cuts on all formats.

Sizes from 1000mm to 1600mm
Up to 19 cutting heads
System with water-jet technology for the execution of longitudinal and transversal cuts on large slabs.
Cutting Nozzles
Through a variable number of cutting nozzles it is possible to produce submultiples and strips. The cut is extremely precise, so much as not to require further finishing.
Cutting Fluid
The water flows out with a pressure of over 4000 bar along with abrasive powder.
Motion on Rollers
The slabs move forward on high accuracy rectified rollers to ensure perfect straightness of the cuts.
Pusher
The perfect perpendicularity of the sides is ensured by an NC pusher command.
Diverter
After the first cutting phase the sheet is moved to 90 degrees to be able to make the cut in the transversal direction.
Control panel
Easy and rapid set-up due to touchscreen.

Sizes from 200mm to 3300mm
Up to 3 longitudinal cutting heads
Up to 4 cross-cutting heads
Machine for cutting large unfired slabs, featuring a cross lane and a longitudinal lane, a disc cutting unit to make cuts on ceramic slabs in both directions, in positions programmable via a touch-screen control panel. Longitudinal cuts made while moving, crosscuts made at a standstill.
Sturdy structure made of welded steel profiles with built-in bearing cross-beam for longitudinal cuts. Conveyor unit controlled by inverter for the adjustment of belt infeed speed.
Disc cutting spindles, driven by 2-pole three-phase motors of 3.2kW connected to dust extraction pipes. Connections to dust extraction system on all the cutting units and the return branch of the conveyor belt.
Cutting unit, consisting of a carriage installed on ball circulation slides that move crosswise in relation to the cutting direction. The crosswise positioning of the carriages is ensured by gear motors with encoder. Maximum precision in determining the cutting depth.