2024-06-20 10:39:53
Match Your Image Post Your Needs

Automatic Slot Machine

( 9 )
  • Automatic Stone Drilling Machine For Undercut Anchors
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Finishing, Profiling MachinesStone Drilling, Slot Machine

    FOB Price:$5500-7000

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    Automatic Stone Drilling Machine for Undercut Anchors 

    Equipment Introduction:This stone drilling machine is used to drill undercut anchor holes in stone panels, concrete panels,ceramic plates,and other cladding panels. Such as granite, marble, travertine, sand stone, crystal glass, quarz, ceramic, etc. 

    Equipment features:
    ·Easy to operate
    ·2 heads can work together or work by single head
    ·Automatic drill 
    Equipment configurations:
    ·Assembled with aqua storage tank and desk universal roller
    ·Electric control system
    ·Stone positioning system
    ·Plates can be adjusted in both X, Y directions
    ·Automatic drill technique of water cooling diamond
    ·Clear plate surface with water spraying·Checking tool of pore forming 
    Technical characteristics:Automatic air supply system, Automatic circulating water system, Drilling positioning system, Drill compensation regulation system. 
    Precision of drilling position:about 1mm.
  • Automatic Drilling Machine For Undercut Anchor Of Ventilated Facades
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Finishing, Profiling MachinesStone Drilling, Slot Machine

    FOB Price:$6500-7000

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    Automatic Drilling Machine For Undercut Anchor of Ventilated Facades
      
    Equipment Introduction:This drilling machine can drill in different stone panels, concrete panels,ceramic panels,and other cladding panels. Such as granite, marble, travertine, sand stone, crystal glass, quarz, ceramic,etc, for back bolt application.

    Equipment features:
    ·Easy to operate
    ·Single die
    ·Automatic drill 
    Equipment configurations:
    ·Stainless steel frame, assembled with aqua storage tank and desk universal roller
    ·Electric control system
    ·Stone positioning system
    ·Plates can be adjusted in both X, Y directions
    ·Automatic drill technique of water cooling diamond
    ·Clear plate surface with water spraying·Checking tool of pore forming 

    Technical characteristics:Automatic air supply system, Automatic circulating water system, Drilling positioning system, Drill compensation regulation system. 

    Equipment parameters:
    1.Voltage: 380v.
    2.Motor power: 2.2KW .
    3.Air pressure: 0.6 Mpa.
    4.Water pressure: 0.15 Mpa.
    Specification: 1900*1650*1550mm. 
    Drilling parameters:
    1.Max hole depth:40mm.
    2.Min spacing: 150mm.
    3.Max plate width: 1200mm.
    4.Max plate length: 1800mm.
    5.Min plate thickness: 12mm. 
    Precision of drilling position:about 1mm.
  • SZ/PC-10 Automatic 45 Tilting Drilling Machine
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Finishing, Profiling MachinesStone Drilling, Slot Machine

    FOB Price:$8000-9900

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Onyx, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    SZ/PC-10 is a special drill machine with a double draw hook hole for dry slate hanging, which is a creative machine in domestic China. It uses the main shaft at high speed, automatic feed knife with air pressure and precise orientation. The special parts use straight-line bearings completely and an imported universal roll wheel, which changes the gliding movement to roll movement with low cost and labors intensity. It is featured as stable function, good precision of drilling hole and high efficiency, which is equal to foreign advanced level. It is an ideal equipment for slate hanging manufacturer.
  • SZ/PC-16 Automatic Horizontal Drilling Machine- Stone Drilling, Slot Machine
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Finishing, Profiling MachinesStone Drilling, Slot Machine

    FOB Price:$8000-9900

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Onyx, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    SZ/PC-16 is the first domestic professional equipment that is used to stone material dry-hang fixed bolt drilling machine. It uses the main shaft at high speed, an automatic feed knife with air pressure, precise orientation. The imported universal roll wheel and others advanced spare parts work together with a PC control system to make the machine convenient operating and stable function and high efficiency. This machine is technically equal to foreign products.
  • Semi-Automatic Side Drilling Machine (Double Host)
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Finishing, Profiling MachinesStone Drilling, Slot Machine

    FOB Price:$7300-7800

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Onyx, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    This machine is suitable for the side drilling of stone dry hanging PC. It adopts the original imported main equipment, and the advance and retreat knife can be controlled manually. Its high-speed spindle drilling can automatically control the drilling depth.
  • Automatic Dry Hanging Slotting Machine
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Finishing, Profiling MachinesStone Drilling, Slot Machine

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    AUTOMATIC DRY HANGING SLOTTING MACHINE
  • full automatic circular stone cutting machine barrel saw marble granite block round slab sheet board production export
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Finishing, Profiling MachinesStone Drilling, Slot Machine

    $14000-16500

    Warranty: 12 Months

    Usage: Granite, Marble, Basalt

    Machinery Function Features:

    This machine has the automatic cycle function of cutting and processing slab with mobile vertical moving and automatic cutting slab by slab,when cutting with single cylinder saw blades,the slab’s middle thickness is a little bigger than the two sides,when cutting with double circular saw blades,the same thick column slabs will be processed,it’s a good deal for the arc plate matching with the advantage of cost reducing,low price,high percentage of out-turn.

    Motor;Jiangsheng

    Contactor: LG

    Switch button: SIEMENS

    The equipment conforms to the national standard.
  • JUNIOR Horizontal Drilling Machine Semi Automatic Slotting/Kerfing/QM
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Finishing, Profiling MachinesStone Drilling, Slot Machine

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Onyx, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    EQUIPPED WITH :
    4 drilling units for horizontal holes
    2 vertical milling machines for hole pocket
    2 horizontal milling machines for slot, stopped slot, prolonged slot, kerf, and rebated kerf (with shaped wheel), QM (bevel cut)
    The machine features:
    2 slab conveyors with manually adjusted width for processing slabs of different sizes. Alongside each conveyor there is a guide to keep the slab aligned
    4 drilling units, 2 on each side of the machine, which can travel along the whole length of the machine
    2 cutting units for the pocket placed above two drilling units on each side of the machine
    2 cutting units for slot/kerf placed above two drilling units on each side of the machine
    2 mechanical stops to hold the slab in position during processing
    MACHINE SPECIFICATIONS
    Slab max width: 188 cm
    Slab min width: 26 cm
    Max distance between 2 holes:
    160 cm (without vertical milling machines) 130 cm (with vertical milling machines)
    Min distance between 2 holes without pocket:20 cm
    Slab conveying carts
    Slab conveying carts are made up of two traverse beams along which two beams equipped with motor- operated slab conveyors move. The width of each beam can be adjusted to process slabs of different sizes.
    The width can be adjusted manually by using a small wheel. The carts move along chrome-plated bars with precision bushes.
    Each cart also features a slab guide and an end stop pneumatically operated in order to process the slab when it is not moving (holes and hole pockets).
    The back/forth motion of the slab conveyors can be selected from the electric panel.
    With forward motion, the slab enters and exits from the opposite end. With backward motion, the processed slab is brought back to its starting point in order to be discharged.
    Drilling units
    By means of a small wheel, four drilling units, two on each side of the machine, can be manually placed longitudinally on two chrome-plated bars of large diameter the whole length of the machine.
    Holes are made when the slab is not moving and held in position by means of two guides and two mechanical stops.
    The drilling units are pneumatically operated by means of a hydraulic brake.
    Feeding has two speeds:
    the first allows for slow penetration of the points into the slab until the points are guided by the hole itself
    the second allows for drilling at optimum speed. Return stroke is always at high speed
    Return stroke is always at high speed.
    One or more spindles can be excluded from processing by selecting them on the operator’s touch screen.
  • CNC Automatic Horizontal Drilling Machine
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Finishing, Profiling MachinesStone Drilling, Slot Machine

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    EQUIPPED WITH
    4 horizontal drilling spindles
    2 milling machines for pockets
    2 horizontal milling machines for slot, stopped slot, prolonged slot, kerf, rebated kerf (with shaped wheel), QM (bevel cut)
    The machine features:
    2 slab conveyors with manually adjusted width for processing slabs of different sizes. Alongside each conveyor there is a guide to keep the slab aligned
    4 drilling units, 2 on each side of the machine, which can travel along the whole length of the machine
    2 cutting units for the pocket placed above two drilling units on each side of the machine
    2 cutting units for slot/kerf placed above two drilling units on each side of the machine
    2 mechanical stops to hold the slab in position during processing.
    Work cycle
    Processing occurs when the slab is not moving. The two conveyors move the slab to the mechanical stops. Before reaching them, speed is reduced to allow for smooth, precise positioning.
    Then, drilling and pocket cutting are performed, or slots and kerfs are made. Once processing is over, the slab is moved backwards, the two mechanical stops retract, and the conveyors bring the slab to the discharge point.
    A new slab is placed on the conveyors, and cycle is started again.
    Machine specifications:
    Slab max width: 180 cm
    Slab min width: 25 cm
    Max distance between 2 holes: 190 cm
    Min distance between 2 holes without milling machine: 18 cm
    Min distance between 2 holes with milling machine: 23 cm
    Handling
    Spindle handilng along the whole length of the machine and of the two carts is operated along precision guides by means of recirculating ball slide guides.
    Motion is operated by precision rolled screws with recirculating ball bushes and precision gearboxes. The four spindles and the two carts are operated by brushless motors coupled with precision gearboxes and driven by electronic drivers which are in turn CNC-operated.
    Precision in positioning
    Precision in positioning is lower than +/- 0.2 mm.
    Output
    Depending on the material used (marble, tender or hard granite) the typical hole with 6-8 mm diameter and 25-30 mm depth is completed in 20-30 seconds. The distance between two slabs is about 20 cm which entails a motion time of about 20 seconds. Therefore, 4 holes are completed in 40-50 seconds, with an output of 290-360 holes per hour. The average repositioning time is about 5 seconds.
    Lubrication
    Lubrication of moving parts is centralized and automated. An automated lubrication cycle for periods when the machine is not used is also available.
    Positioning system
    It is automated thanks to an industrial computer. The operator must set slab width, hole position with reference to the mechanical stops, make requests for holes with or without pocket, and the automatic system will provide the necessary motions for the drilling heads and the carts.
    Once the machine is positioned, the automated work cycle is started.
    The height of the drilling spindles is adjusted by using a motor-reducer operated by two buttons on the spindle columns.
    4 holes on each side of the slab can be made, along with two pockets on one side, as well as slots, prolonged slots, and kerfs.
    The computer features also the following utilities:
    Generation of drilling programs, storing of the programs by code (brand), list of and changes to the programs (on the machine) sorted by order
    Generation of drilling programs, storing of the programs by code (brand), list of and changes to the programs on PC so that they can be later stored in the machine by using a floppy disc, and sorted by order
    Displaying of drilling programs
    Displaying of machine status (diagnostics)
    Automatic synchronising
    Storing and displaying of drilled slabs and of the holes made as of a given date (password required) Lubrication cycles for periods when the machine is not used.
  • 1

Have a Question? Ask our expert

FAQ icon
Ask now
Clear All
Compare (0/4)
StoneContact
loading
Tips

Tell Suppliers what you want to buy

Tips

Submitted successfully, thank you!