If you need our help, we will be glad to help you until you find your products.
Skype: StoneContact.com
WhatsApp/Wechat: +86-17689946988
Clear All
Compare (0/4)
Stone Factory Machines
( 3,807 )Michelangelo: “I saw the angel in the marble and carved until I set him free”. Thanks to the natural stones that come to the factory in large blocks from the quarries, the touch of skilled craftsmen and of course high technology machines, natural stone products that we use and see in our homes and around us emerge. You can see all of these factory machines, polishing, carving, cutting, etc. with their technical details on Stonecontact.com and get in touch with their manufacturers directly.
More Hide
Categories:
Stone Block Cutting Machines (582)
Stone Slab Cutting Machines (656)
Stone Tile Cutting Machines (504)
Stone Surface Processing Machines (379)
Resin Line Machines (64)
Stone Finishing, Profiling Machines (1031)
Stone Factory Cleaning Equipments (132)
Stone Handling, Loading Machines (456)
Show More
-
Add To CompareType: Stone Factory MachinesStone Tile Cutting MachinesMitre Saw, Edge Cutting Machine
FOB Price:
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Accessories
Lateral and orthogonal rollaway back stops.
Water recirculation pump.
Optionals
Nr. 2 idle roller tables (front or back).
Hand remote control (only A version).
Rollaway back stop.
Laser for cutting line.
EmmeDue
San Marino
EmmeDue Division - Industrie Montanari S.r.l.
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Finishing, Profiling MachinesStone Drilling, Slot Machine
FOB Price:
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
EQUIPPED WITH:
2 drilling units
1 milling machine for the pocket
The machine is made up of a solid base in metalwork fabrication upon which two traverse chrome-plated bars are mounted. Two carts for slabs handling travel along the bars: each cart features two rows of idle wheels.
Cart motion adapts to the different sizes of the slabs thanks to a cross-head nut operated by means of a small manual wheel. The supports of the carts move along self-lubricating bushes.
The slab is hold in position by two steel guides along each of the two rows of idle wheels.
The two drilling units are placed alongside each cart. They are pneumatically operated by a hydraulic brake and are used to make holes on the slab edge.
MACHINE SPECIFICATIONS:
Slab max width 120 cm
Slab min width 20 cm
Penetration speed can be adjusted as follows:
to slowly penetrate into the slab until the diamond pointisguided(about3 ÷4mm);
to penetrate, at a higher speed, into the remaining 90% of the hole in order to complete it as fast as possible.
Once the hole has been completed, the return speed is always high.
Hole depth is varied by adjusting a magnetic sensor.
Hole positions are obtained by placing two retraction mechanical locks on one of the two carts. A milling machine is placed above one of the two drilling units in order to create the pocket. The milling machine is pneumatically operated by means of a brake and its speed can be adjusted to:
quickly reach the slab
perform final cutting.
Return speed is always at the maximum value.
The stroke corresponding to the two speeds can be adjusted by using microswitches. Cutting is aligned with the hole.
Once the slab is positioned, pocket drilling and cutting are automatic. The operator must press the corresponding button to start cutting. Either spindle can be excluded from drilling.
Prometec
Italy
Prometec s.r.l.
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Finishing, Profiling MachinesStone Carving,Engraving Machine
FOB Price:
Warranty: 12 Months
Usage: Marble, Limestone, Onyx, Quartzite, Sandstone, Travertine
Machinery Function Features:
2000x9000mm Working with Water Cooling, which is produced to process and cut Marble, Marble, Cimstone, Granite, Sink, Rolyef processing Tombstone in 2 and 3 dimensions. Veye Increased special request Stone Floor mass processing capacity Cnc Router Marble Machine Cnc Marble Machines
CNC marble router Machine Models Sizes Can Be Sized According To Customer Requirements
Processing Dimensions
X-1000 Y-2000 z-200 mm
Motion Motors
X-0.75 Kw Y-0.75 Kw x 2 Pieces Z-0.75 Kw hybrid servo motor
Movement System
2 module helical induction rack gear
Reducer
X- i 10 Y- i 10 x 3 pieces backlash-free planetary gearboxes
Slide System
X-25 Y-25 Z-25mm Machined Slide
Spindle Motor
3,5 Kw spindle motor manual collet
Control Panel
MACH-3 Control Panel + PC (OPTIONAL DSP PANEL)
Stone Compaction PINOMATIC / optional
The Feature of Continuation From Where Power Failure Left
Machined CHASSIS Complete Machined Rail System Precision
Automatic Water OPTIONAL
Machine Slide Liner Kremier Bellows Protection System
Backlash-free Precision Planetary Reduktor Drive Systems
HomeSWICH 3PCS
Epoxy Paint Protection
Strong Monoblock Chassis Bridge Walkways
Cnc Router Som-maK is at your service with the quality of the machine.
Som-maK
Turkey
Som-maK Mermer Granit Makina Ltd Sti
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Surface Processing Machines Slab Polishing Line Machine
FOB Price:
Warranty: 12 Months
Usage: Marble, Limestone, Onyx, Quartzite, Sandstone, Travertine
Machinery Function Features:
"Storm" Series LCG / LCM 600/2200 is a polishing machine from the Italian company CO.M.E.S., which is the result of 40 years of experience in the production of polishing heads for marble, granite and ceramics.
Ergonomics, efficiency and safety are the principles that inspire our work, so that we can provide each buyer with the highest quality CO.M.E.S. Every detail of the machine has been designed with incomparable accuracy. Countless hours of development and factory testing of STORM polishing lines ensure that the strictest standards are met.
Co.Mes
Poland
Euro Arss S.C.
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Tile Cutting MachinesStrip Cutting,Edge Trimming Machine
FOB Price:
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Quartzite
Machinery Function Features:
The Kolibri-SB-K machine is a professional equipment designed for longitudinal sawing of cores of any composition and is widely used in petrophysical laboratories and core storages.
The cutting tool is a diamond blade with a diameter of 450 mm. Adjustable stepless feed rate and spindle rotation frequency allow you to select the optimal cutting mode for any type of stone and cut in one pass, eliminating cracking and galling of the sample.
The pneumatic clamping device, equipped with a displacement mechanism, reliably, without damage, fixes the core with a diameter of 50 to 120 mm and allows you to set the cutting geometry from 1/2 to 1/3 of the core diameter, and modern linear guides ensure high accuracy and smoothness of the cut.
The machine uses a closed cooling cycle, but also provides a dry cut option. Water is supplied directly to the cutting tool from a cascade bath, which serves as a sludge settler.
Reliability and simplicity of design make the machine durable and undemanding to the qualifications of the operator.
Experimental Plant
Russian Federation
Experimental Plant LLC
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Finishing, Profiling MachinesCNC Working Center
FOB Price:
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
The machine is equipped with up to 5 blade motors driven by different variable speed power units to be used simultaneously or single.
For high production sawing up to thirteen axes.
Multi blade cutting for dimension from 140 mm to 2000 mm, the central unit can perform inclined cut up to 90° on all around 370°.
Independent tool wear control and compensation for each blade.
Accurate and fast thanks to brushless motors and to linear bearing guides.
Extreme precision cutting result due the rotating top cutting unit, the material doesn’t need to be shifted or re-aligned.
Automatic nesting of the cutting piece on board with defect track, due the use of and external camera, the cutting performance are guarantee from the easy to use software and the GMM patented vacuum installed on the central unit.
Ability to load electronic cutting sheet.
The machine performs automatically parallel cut, arcs and pieces shift by vacuum for allowing blade overruns.
Compact cutting line solution when equipped with automatic loading device and roller belt feeding system. Large production result up to 490 sq/m in 8 hours.
OPTIONAL
Nesting.
Camera on board.
Parametric program.
Vacuum system.
Robotic loader.
Automatic load carrier.
Motorized roller unit.
Short conveyor belt for cutting.
Short conveyor belt for unload.
Drying fun.
GMM
Italy
Gmm S.p.A.
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Surface Processing Machines Single Head Polishing Machine
FOB Price:$15000-23000
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Polishes big slabs of 3200×2000mm, up to 100mm thick. (On request, can be above 200mm)
The spindle moves up and down, by hydraulic, by means of 4 pieces of chrome-plated steel columns. The air pistons keep stable pressure on the slabs to get good polishing. This solution guarantees the machine works at a big range of thicknesses.
Polishes granite and marble by changing the polishing head. The rpm of the polishing head is adjusted by an inverter so it can work on all kinds of stone.
One-day installation. The installation at the stone factory is very simple. Monoblock steel frame. No concrete foundation is needed. The footprint is 5800×3400mm. The weight of machine is 6500 KG.
4 automatic working modes. It polishes 12-16 pcs of slabs at 3200×2000 with 5 steps of abrasives in 8 hours.
Stoneplus
China
STONEPLUS MACHINERY CO.,LTD
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Tile Cutting MachinesMulti-Blade Cross-Cutter,Trimming
FOB Price:
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite
Machinery Function Features:
The HD-1 type single axis cutting machine, with one pass, allows the longitudinal cutting of strips and tiles, trimmed after the polishing line; to square pieces without shape; to make baseboards; for mosaics and stone bases in the ornamental field.
allows the longitudinal cutting of strips and tiles, finding today application in various sectors and processing phases: to cut after the finished line to square pieces without shape; to make baseboards; for mosaics and stone bases in the ornamental field.
Technical characteristics:
It is built with a single shaft for diamond discs;
Ensures quick replacement of both the complete removable disk sleeve, which of each individual disk, thanks to the front opening and upper part of the structure and the particular construction of the spindle;
It is equipped with spacers between the disc and the disc to measure cuts to execute;
It has a support surface made of motorized thick rubber tape, with adjustable advance speed according to thickness and type of material to be cut;
It works by motor / spindle with belt transmission, with the possibility of speed variation; It guarantees a perfect longitudinal cutting precision by particular lateral guides of the conveyor belt;
It has the motor of the shaft of the disc holder positioned so that as much as possible protected from any waste from processing and melting of water, guaranteeing safety, durability and reliability;
It allows the raising and lowering of the spindle support bridge to adjust the depth of cut, to compensate the diameter of the wear of the diamond discs;
It is completed with a wide adjustable lateral material guide bar, equipped, in the insertion part, with clamps that hold the material adhered to the belt and pressed against the guide bar;
Gives the operator complete control of the controls (spindle support lock, disc depth adjustment, guide bar positioning).
HERSEN S.L
Spain
HERSEN S.L
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Slab Cutting MachinesCNC Bridge Cutting Machine
FOB Price:
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Artificial Stone
Frugoli
China
Fujian Frugoli Machinery Development Co.,Ltd.
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Finishing, Profiling MachinesStone Carving,Engraving Machine
FOB Price:
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Basalt, Quartzite
Machinery Function Features:
Evolution is a 3 interpolated axes CNC router with a whole monolithic stainless steel structure. With a wide archive of images and fonts (engraved and in relief), it is the best working assistant in terms of precision and reliability. The optional automatic tool change makes the process completely automatic and the machine’s precision guarantees an excellent finished product. The integrated Helios Galaxy Stone software is simple and intuitive, suitable for all stone fabricators.
HELIOS
Italy
Helios Automazioni Srl
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesEdge Profiling, Polishing Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Sandstone, Travertine
Kamhan Industrial Limited
Pakistan
Kamhan Industrial Limited
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMitre Saw, Edge Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Accessories
Manual lifting head “Z“ Axis with hand wheel.
Water recirculation pump.
Lifting hand.
Supporting steel table.
Lateral and orthogonal rollaway back stops.
Optionals
Idle roller table (front or back).
Angle square kit.
“X” axis movement with hand wheel.
Nr. 2 wheels for moving the machine.
EmmeDue
San Marino
EmmeDue Division - Industrie Montanari S.r.l.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesEdge Profiling, Polishing Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
NOVELTY
MGP/3 is the new automatic machine for steps and edging on ceramic, gres porcelain, marble, granite and agglomerate materials.
It is a revolutionary model that allows two different types of machining with just one automated, compact machine:
- a 45° bevel for creating steps.
- edging for skirting, doorsteps and window sills, with bullnose and half bullnose edges.
MGP/3 consists of 3 motor-spindles for tools, which can be angled to create a 45° bevel for steps or adjusted to an upright position for creating edges.
Available also in the five-head version to simultaneously operate five different grinding wheels and cut down working time.
MGP/5 is the new automatic machine for steps and edging on ceramic, gres porcelain, marble, granite and agglomerate materials.
It is a revolutionary model that allows two different types of machining with just one automated, compact machine:
- a 45° bevel for creating steps.
- edging for skirting, doorsteps and window sills, with bullnose and half bullnose edges.
MGP/5 consists of 5 motor-spindles for tools, which can be angled to create a 45° bevel for steps or adjusted to an upright position for creating edges.
MGP/5 allows to simultaneously operate five different grinding wheels and cut down working time.
CompactLine
Italy
Ferrari & Cigarini SRL
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesStone Drilling, Slot Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
EQUIPPED WITH :
4 drilling units for horizontal holes
2 vertical milling machines for hole pocket
2 horizontal milling machines for slot, stopped slot, prolonged slot, kerf, and rebated kerf (with shaped wheel), QM (bevel cut)
The machine features:
2 slab conveyors with manually adjusted width for processing slabs of different sizes. Alongside each conveyor there is a guide to keep the slab aligned
4 drilling units, 2 on each side of the machine, which can travel along the whole length of the machine
2 cutting units for the pocket placed above two drilling units on each side of the machine
2 cutting units for slot/kerf placed above two drilling units on each side of the machine
2 mechanical stops to hold the slab in position during processing
MACHINE SPECIFICATIONS
Slab max width: 188 cm
Slab min width: 26 cm
Max distance between 2 holes:
160 cm (without vertical milling machines) 130 cm (with vertical milling machines)
Min distance between 2 holes without pocket:20 cm
Slab conveying carts
Slab conveying carts are made up of two traverse beams along which two beams equipped with motor- operated slab conveyors move. The width of each beam can be adjusted to process slabs of different sizes.
The width can be adjusted manually by using a small wheel. The carts move along chrome-plated bars with precision bushes.
Each cart also features a slab guide and an end stop pneumatically operated in order to process the slab when it is not moving (holes and hole pockets).
The back/forth motion of the slab conveyors can be selected from the electric panel.
With forward motion, the slab enters and exits from the opposite end. With backward motion, the processed slab is brought back to its starting point in order to be discharged.
Drilling units
By means of a small wheel, four drilling units, two on each side of the machine, can be manually placed longitudinally on two chrome-plated bars of large diameter the whole length of the machine.
Holes are made when the slab is not moving and held in position by means of two guides and two mechanical stops.
The drilling units are pneumatically operated by means of a hydraulic brake.
Feeding has two speeds:
the first allows for slow penetration of the points into the slab until the points are guided by the hole itself
the second allows for drilling at optimum speed. Return stroke is always at high speed
Return stroke is always at high speed.
One or more spindles can be excluded from processing by selecting them on the operator’s touch screen.
Prometec
Italy
Prometec s.r.l.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Slab Cutting MachinesCNC Bridge Cutting Machine
$54000-56500
Warranty: 12 Months
Usage: Granite, Marble
Machinery Function Features:
CNC Stone Machine
HKNC-560/650 is a numeric controlled stone cutting and shaping centre which utilizes a 5-axis moving ability to:
* make vertical, inclined& horizontal Cut with Disc Blade
* cut curves with Contour Cutting
* machine with the Core Tool such as drill, end mill & excavation wheel
* Incremental routing for sink cutting, profiling & engraving
Match these capabilities with the Servo Motor Mitering’s automatic 0-90 degree blade rotation, Italian ESA CNC system and photographing system to make any cut with ease. HKNC-650 has also been equipped with a vacuum manipulator for the automatic moving of slabs to optimise workpiece usage during the cutting process.
Main Features:
1) 5 axis linkage control with Italian CNC Esa system.
2) Easy to use interface with 19" color touch-screen.
3) Combine fuctions of carving, milling, cutting, drilling, engraving into an organic whole for complex processing.
4) Blade can rotate 0°-360° and tilt 90° for any any direction's and any angle's chamfering cutting.
5) Working platform can tilt 85 degrees, easy for slabs loading.
6) Manual cuts available for simple machining.
7) Vacumm manipulator for workpieces handling.
8) Photo slab for nesting and avoiding defects.
9) Nesting manual / automatic to optimize slab surface usage
10) RTCP tool point tracking function ensure precision machining easy.
11) Optional - Vein match for easily matching up perfectly each vein,color at the seam of your project.
HUALONG
China
Fujian Province Hualong Machinery CO., LTD.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Surface Processing Machines Slab Polishing Line Machine
Warranty: 12 Months
Usage: Granite, Marble
Machinery Function Features:
Machine suitable for calibrating and polishing semi-worked strips and/or sized pieces in marble or similar stones.
Machine base in electrowelded steel plates with fully worked top covered and protected by stainless steel covering over which conveyor belt passes.
Up/down movement automatic as material passes thanks to electronic programmer to set lenght of time and position.
The machines are built on specific request of customers matching any kind of polishing process or any kind of natural stone.
Main structure covered in electrowelded steel sheets.
Conveyor belt seated on level surface, covered in stainless steel.
Belt runs on two cylinders – one at entrance to stretch belt, one at exit with electronically controlled variable speed gear motor.
Operating heads centrally housed on strong, electrowelded beam.
Pneumatic vertical movement on chrome column.
Transverse spindle unit beam movement powered by electronically controlled electric motor.
Beam at front bearing diamond calibrating heads.
Abrasive/calibrating head up/down movement is pneumatic; working pressure of individual heads can be regulated and seen on pressure gauge; automatic gauging of material thanks to electronic programmer for time/position.
Individual heads can be excluded.
Conveyor speed/spindle-holder beam on display in real time; motor absorption.
Fault-detection.
Individual heads with raising device for abrasive wear irrespective of material thickness.
LX board, placed away from main body of machine, provides power, auxiliaries, accident protection and PLC.
Terzago
Italy
Terzago Macchine
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Factory Cleaning EquipmentsCollapsible Dumpster
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Artificial Stone
Machinery Function Features:
A must for every workshop or warehouse! Collapsible Dumpster (Tilt Dumpster) is always a handy way to keep your workshop floor clean and safe. The Dumpster is constructed with heavy gauge sheets, angles, and channel steel. Collapsible Dumpster (Tilt Dumpster) Features:
- Handy lever-action assures safe dumping.
- Reinforced steel makes the Dumpster last longer.
- Heavy-duty channel forklift pocket and safety pin add stability and safety when unloading.
- Compact design with two (2) heavy-duty swivel casters with brakes and two (2) rigid casters allow the
Dumpster to be moved around the shop floor, construction site or through narrow spaces easily.
AUSAVINA CO.,LTD
Viet Nam
AUSAVINA CO.,LTD
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Slab Cutting MachinesCNC Bridge Cutting Machine
Warranty: 12 Months
Usage: Marble, Limestone, Onyx, Quartzite, Sandstone, Travertine
Machinery Function Features:
CNC Bridge Cutting Machine Circular cutting, Cross Cutting, french balcony 45 degree angle cut to marble, Sink Cutting and profile scanning operations.
CNC Marble Bridge Cutting Machine In this machine, all axes are controlled by a servo motor. Servo motors are also coupled to backlash-free servo gearboxes. Thus, 0.1mm cutting precision has been achieved. Linear guideways are used as guideways, the forward axis drive operation; It is provided with precision, hardened, ground rack and pinion gear. The machine control system is CNC-based and supports G codes obtained by CAD-CAM in complex shapes. Since the cutting angles are provided from the rotary head in this type of machines, it is very easy to obtain the specified cutting processes.
Main Motor: 15 KW (0-3000 Min.) Speed Drive
Bridge Motion Motor: 1,5 KW Servo Driver
Saw Horizontal Motor: 1,5 KW Servo Driver
Up Down Motor: 0.75 KW 1500 Min.
360 Degree Head Motor: 0.75 KW Servo Driver
Hydraulic Tap Motor: 1,5 KW 1500 Min.
45 Degree Tilting: 1.5 KW Servo driver
Disc Diameter: 350 mm 500mm
Cutting Width: 1900 mm
Cutting Length: 3500 mm
Machine Width: 3000 mm
Machine Length: 5800 mm
Machine Height: 2750 mm
Machine Weight: 4500 mm
Som-maK
Turkey
Som-maK Mermer Granit Makina Ltd Sti
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesCNC Working Center
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
MULTISPINDLE CNC CUTTING CENTER
The machine is equipped with up to 5 blade motors driven by different variable speed power units to be used simultaneously or single.
For high production sawing up to thirteen axes.
Multi blade cutting for dimension from 140 mm to 2000 mm, the central unit can perform inclined cut up to 90° on all around 370°.
Independent tool wear control and compensation for each blade.
Accurate and fast thanks to brushless motors and to linear bearing guides.
Extreme precision cutting result due the rotating top cutting unit, the material doesn’t need to be shifted or re-aligned.
Automatic nesting of the cutting piece on board with defect track, due the use of and external camera, the cutting performance are guarantee from the easy to use software and the GMM patented vacuum installed on the central unit.
Ability to load electronic cutting sheet.
The machine performs automatically parallel cut, arcs and pieces shift by vacuum for allowing blade overruns.
Compact cutting line solution when equipped with automatic loading device and roller belt feeding system. Large production result up to 490 sq/m in 8 hours.
OPTIONAL
Nesting.
Camera on board.
Parametric program.
Vacuum system.
Robotic loader.
Automatic load carrier.
Motorized roller unit.
Short conveyor belt for cutting.
Short conveyor belt for unload.
Drying fun.
GMM
Italy
Gmm S.p.A.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesEdge Profiling, Polishing Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Automatic machine with 2, 3, 4, 5 or 6 motor-spindles to bevel at 45° the slabs in gres porcelain, marble and stone which are necessary for the composition of steps.
CompactLine
Italy
Ferrari & Cigarini SRL
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesStone Drilling, Slot Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
EQUIPPED WITH
4 horizontal drilling spindles
2 milling machines for pockets
2 horizontal milling machines for slot, stopped slot, prolonged slot, kerf, rebated kerf (with shaped wheel), QM (bevel cut)
The machine features:
2 slab conveyors with manually adjusted width for processing slabs of different sizes. Alongside each conveyor there is a guide to keep the slab aligned
4 drilling units, 2 on each side of the machine, which can travel along the whole length of the machine
2 cutting units for the pocket placed above two drilling units on each side of the machine
2 cutting units for slot/kerf placed above two drilling units on each side of the machine
2 mechanical stops to hold the slab in position during processing.
Work cycle
Processing occurs when the slab is not moving. The two conveyors move the slab to the mechanical stops. Before reaching them, speed is reduced to allow for smooth, precise positioning.
Then, drilling and pocket cutting are performed, or slots and kerfs are made. Once processing is over, the slab is moved backwards, the two mechanical stops retract, and the conveyors bring the slab to the discharge point.
A new slab is placed on the conveyors, and cycle is started again.
Machine specifications:
Slab max width: 180 cm
Slab min width: 25 cm
Max distance between 2 holes: 190 cm
Min distance between 2 holes without milling machine: 18 cm
Min distance between 2 holes with milling machine: 23 cm
Handling
Spindle handilng along the whole length of the machine and of the two carts is operated along precision guides by means of recirculating ball slide guides.
Motion is operated by precision rolled screws with recirculating ball bushes and precision gearboxes. The four spindles and the two carts are operated by brushless motors coupled with precision gearboxes and driven by electronic drivers which are in turn CNC-operated.
Precision in positioning
Precision in positioning is lower than +/- 0.2 mm.
Output
Depending on the material used (marble, tender or hard granite) the typical hole with 6-8 mm diameter and 25-30 mm depth is completed in 20-30 seconds. The distance between two slabs is about 20 cm which entails a motion time of about 20 seconds. Therefore, 4 holes are completed in 40-50 seconds, with an output of 290-360 holes per hour. The average repositioning time is about 5 seconds.
Lubrication
Lubrication of moving parts is centralized and automated. An automated lubrication cycle for periods when the machine is not used is also available.
Positioning system
It is automated thanks to an industrial computer. The operator must set slab width, hole position with reference to the mechanical stops, make requests for holes with or without pocket, and the automatic system will provide the necessary motions for the drilling heads and the carts.
Once the machine is positioned, the automated work cycle is started.
The height of the drilling spindles is adjusted by using a motor-reducer operated by two buttons on the spindle columns.
4 holes on each side of the slab can be made, along with two pockets on one side, as well as slots, prolonged slots, and kerfs.
The computer features also the following utilities:
Generation of drilling programs, storing of the programs by code (brand), list of and changes to the programs (on the machine) sorted by order
Generation of drilling programs, storing of the programs by code (brand), list of and changes to the programs on PC so that they can be later stored in the machine by using a floppy disc, and sorted by order
Displaying of drilling programs
Displaying of machine status (diagnostics)
Automatic synchronising
Storing and displaying of drilled slabs and of the holes made as of a given date (password required) Lubrication cycles for periods when the machine is not used.
Prometec
Italy
Prometec s.r.l.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesCalibrating Machine
$12000-18000
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
The machine is to calibrate the strips of marble and granite by using the calibrating plates with diamond segments.The calibrating heads are fxed on the bridge. Displayed calibrating head up-down.The feeding speed of conveyor is controlled.Machine with more numbers of calibrating heads and with diferent working width can be customized
Stoneplus
China
STONEPLUS MACHINERY CO.,LTD
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Handling, Loading MachinesAutomatic Loader, Unloader for Slabs
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Artificial Stone, Quartzite, Sandstone
Machinery Function Features:
ROBO-MOVE SYSTEM
The international patent #0001419746
The Helios Research & Development Department has conceived the Robo-Move system as a cutting assistant, which avoids the operator a manual heavy work. It is a slab handling system, which helps the unloading of the pieces, ensuring the integrity of the materials while the machine is working. The patented Robo-Move system is a cnc handling girder that works independently inside the working area of the machine. It moves the pieces of the cut slabs to avoid the intersection, interacts with the cutting head and moves the slab for the final processes. As it is completely automated, the Robo- Move takes care of the pieces during the movements without the operator manual intervention.
HELIOS
Italy
Helios Automazioni Srl
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMulti-Blade Cross-Cutter,Trimming
Warranty: 12 Months
Usage: Granite, Marble, Artificial Stone, Basalt, Quartzite, Sandstone
Machinery Function Features:
The HD-2 type cutting machine with one pass allows the longitudinal cutting of strips and tiles, to make baseboards, mosaics and all kinds of stone bases. By having two axes it allows cutting high thicknesses.
HERSEN S.L
Spain
HERSEN S.L
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Slab Cutting MachinesCNC Bridge Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Saw Motor Power: 20 kW
Max Saw Diameter: 700 mm
Maximum Working Length: 3500 mm
Maximum Working Width: 2100 mm
Maximum Working Thickness: 240 mm
Water Consumption: 50 lt/dk
Machine Length: 5500 mm
Machine Width: 3200 mm
Machine Height: 4000 mm
OZKKM 700/500 AQUILA is monobloc bridge sawing machines that, thanks to the advanced functionality, allow every stone fabrication shop to be equipped with accurate and quick machines, without giving up quality. The standard versions of AQUILA 700/500 is monobloc, i.e.: mounted on a monolithic structure of steel carpentry that assures utmost rigidity and stability levels, with no need of any concrete foundation. For this reason, if necessary, they can be easily moved elsewhere. The monobloc configuration can be exploited also for using these machines as “building“ equipment, i.e. it can be placed time by time near the factory where the coating, flooring, etc. are being done.
OZKKM 700/500 AQUILA is the result of the most advanced designing on computer and the massive use of FEM”* analysis in order to reach a very high rigidity level of the bridge and structures. Even though it is a sawing machines, both have technical solutions similar to the ones of a CNC machine. All the movements of the axes are on linear bearings which do not need to be adjusted. All the lubrication points have been gathered in areas which can easily be seen and reached, without disassembling guards or protections for facilitating ordinary maintenance. High level components are employed. The motors used, except for the Z axis, are servo motors with precision reducers. Especially the high speed of the X axis allows to cut down idle times as much as possible with a productivity increase (the percentage of the time that the disc stays on the material is higher with respect to the time for placing or returning to cut start)
The spindle, anchored in front of the beam to offer the utmost rigidity, can accommodate discs up to a diameter of 700 mm for the AQUILA 700, diameter of 500 mm for the AQUILA 500. The head of that machine can rotate “IN CONTINUOUS” i.e. always making the less route for positioning between one cut and another, for the benefit of productivity. Thanks to this peculiarity, it is possible to draw on the X-Y plane circles and circle arches of any size, in all the positions of the working area. The choice of placing the cutting disc in axis with the head rotation center reduces to zero the efforts on the axis for an excellent cutting quality. The inclination of the disc is manual from 0° to 90° and the possibility to interpolate the X and Y axes make the machine suitable for repetitive processing and single details even with vertical, inclined, parallel, orthogonal, diagonal and curved cuts. The machines, in the standard version are equipped with a fixed table and can be equipped with a tilting table (option) to facilitate the loading and unloading of the processed pieces
Ozteknik Makine
Turkey
Ozteknik Makine
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesMosaic Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
the thrilling mosaic cutting machine of the age hard to find even on the second hand market
order now start counting your golden münze
precise cutting
1x1 cm 1,5x1,5 cm 2x2cm 2,3x2,3cm all american sizes available
custom design assebly molds
cutting molds with availibity of cutting triangle ; octagon and many other custom shapes
Kimmco
Turkey
Kimmco Koray International Marble & Machinery Co.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesSingle Disc Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Sandstone, Travertine
Machinery Function Features:
Manual Table Cutting/milling Machine For Marble Slabs, Tiles
MORDENTI S.R.L.
Italy
MORDENTI S.R.L.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Slab Cutting MachinesCNC Bridge Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
CNC controlled rotation head bridge saw for cutting stone slabs, processing bathroom shelves and cutting recesses in kitchen worktops in marble, granite, ceramic and other materials, suitable for use with saw blades 400 mm to 625 mm.
Monoblock version
including steel foundations
including tilting table with hardwood support
including hydraulic unit and control panel for tilting table
including light barrier as a safety device
weha
Germany
Weha Ludwig Werwein GmbH
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Slab Cutting MachinesCNC Bridge Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Sandstone
Machinery Function Features:
Bridge saw CAT. 850 modello VIC-TAB: machine with 3 linear axes X (trolley), Y (bridge), Z (head), simple and sturdy with two-beam bridge, designed and manufactured to satisfy the most demanding companies in the stone machining sector for traditional cutting and shaping. Suitable for manual, semi-automatic and automatic machining work with latest-generation "SIPRO siax150" numerical control. The work bench is sturdy and heavy and can be rotated 360° manually with a precision bearing. It can be tipped with a hydraulic mono-piston to facilitate slab loading procedures. The bench can be locked in 4 fixed positions at 0°, +45°, -45° and +90°, with an optional of another 4 positions every 45° and out of square in all 360° of rotation. The disc holder head is fast and precise for cutting machining work and can be inclined manually using the handwheel, lockable from 0° to 90° in any position.
Campagnola e Fedeli Srl
Italy
Campagnola e Fedeli Srl
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMulti-Blade Cross-Cutter,Trimming
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
General Characteristics
The Horizontal splitting machine allows doubling the production of the block-cutter by splitting in two pieces thik slabs cut on the latter. Placed on the beginning of the marble line it feeds it continuously increasing production and lowering cost.
The machine is manufactured in two models: with 2 or 4 tables. in the REF1x62, 1 pair of opposed spindles are placed so that every blade can cut half of the width of the material.
The REF4x62, is equipped with two pairs of opposed spindles so that every blade can cut one fourth of the material. This system allows dealing with the cut of hard marbles.
The hardness of the material determines the feed speed of the belt that can be adjusted from 0 to 3m/min.
SNIC
Lebanon
S.N.I.C.- Societe Nahas Pour L'industrie Et Le Commerce
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Block Cutting MachinesSingle Arm Block Cutting Machine
Warranty: 12 Months
Usage: Marble, Limestone, Onyx, Sandstone, Travertine
Machinery Function Features:
Used for cutting relatively small stone blocks and its available with different motor power, rail and table size to meet the customer requirements.
Ahmad Zaidan Sons & Co.
Jordan
Ahmad Zaidan Sons & Co.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesEdge Profiling, Polishing Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
A multipurpose machine
More than only a flat polisher, the T558 can perform various operations like bushhammering, calibrating with satellites head, or texturing works using the know-how THIBAUT has developed for many years.
The T558 can be used to work concrete: flat, concave or convex surfaces. The runway length is adjustable according to your needs and your workshop area.
An extremely sturdy machine
THIBAUT used all its know-how for the conception of this machine, as well as its knowledge of polishing techniques. The result is an extremely sturdy machine, with a bridge and a vertical carriage in cast iron put on a runway using real train rails (Very High-Speed Train), carefully calibrated. Choosing a T558 flat polisher is choosing the sturdiest machine of its category, able to achieve an excellent polishing quality, and for a long time.
A complete working autonomy
With its tool magazine, the T558 changes automatically of milling and polishing heads and can realise operations after operations completely automatically. It could be milling, polishing, plastering, edges polishing..., all these operations can be made without intervention nor stoppages. Concaves or convexes panels can be polished too, thanks to specific equipment.
Easy programming
The T558 is very easy to program and use, thanks to a friendly interface. The machine is delivered with built-in parameters, that are adjusted during the commissioning. Optional, the program for irregular shapes gives you the possibility to take into account the real shape of the pieces to work on, and so to save a lot of time (the head does not work on a basic rectangular shape but follows the real piece shape). Optional too, you can program the position and the size of eventual openings (in case of concrete panels).
https://www.thibaut.fr/en/machine-t558-flat-polishers-architectural-concrete-other-industries-other-materials/
Thibaut
France
Thibaut S.A.S.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesCNC Working Center
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Artificial Stone
Machinery Function Features:
IMAGE320 CNC 3 axes work center performs all kinds of work with great accuracy and speed.
This work center has been designed in order to perform jobs of any level of sophistication with guaranteed high quality.
IMAGE320 CNC 3 axes proficiently executes all tasks requiring milling, grinding, drilling and polishing.
This work center is simple to program and can be handled by an operator with little computer knowledge.
PCRUZ
United States
PCruz USA LLC
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMulti-Blade Cross-Cutter,Trimming
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Our cutting line N.2990/2200-5+7C has been designed to obtain maximum production with minimum operator labor and maximum reliability in the machines that comprise it.
The general dimensions of the production line have been adjusted to the needs of the client, following the criteria established by it, in terms of the dimensions of the pieces to be manufactured and the final products obtained.
The entire line is characterized by the robustness and reliability of the machines that make it up, all of which are designed to withstand the toughest working conditions, and it is precisely in this aspect that we can contribute all the experience accumulated over the years that We have been designing and manufacturing machinery for this sector.
One of the great advantages that we can highlight of the machines of this production line is that they are models with designs that have already been evaluated in their operation, and that they only differ from our series machines in their fundamental dimensions, but not in all the components that they incorporate. .
By means of the NDF-1289 automatic loading car (optional), we will feed the longitudinal cutter with the material coming from a stevedore, the boards are collected by this automatic feeder, through the use of suction cups connected to a vacuum pump that lowers them until put them in a horizontal position, prepared for their advance towards the cutting unit. The boards are picked up from the horizontal stacker and positioned waiting to enter the production line in
such a way that in successive boards the alignment is maintained and it is not necessary to adjust the starting point of the cutter.
The intermediate roller table constitutes the point of union between the feeding car and the longitudinal cutter. In addition, it acts as an intermediate warehouse so that the downtime of the cutting unit is minimal.
The longitudinal cutter with 5 heads on mobile bridge N.8000-L-5C and the transverse cutter with 7 heads N.8000-T-7C, are machines equipped with the latest technological advances in terms of their mechanical and electronic design. What stands out above all are the linear guide systems of the headstock bridge supported by two beams parallel to the cutting table, the first and perpendicular to the second, with precision linear guides and high-precision, high-rigidity recirculating ball slides, on the that it displaces, to carry out the cutting tasks. By alternating the positioning of the cutting heads we can achieve a multitude of measures depending on the needs of the client.
The movable disc holder heads supported on linear guides on the bridge, with recirculating ball sliders, also carry out the vertical movement guided on recirculating ball sliders and driven by a laminated spindle
with recirculating ball nut, to be able to position very quickly. and precision, leaving the entire assembly perfectly protected by PVC bellows.
Head holders equipped with translation movement through a displacement motor reducer controlled by a frequency converter and a magnetic rule for positioning on the X axis, and a head driven by a spindle and an electric motor reducer for vertical positioning of the cut on the Z axis. The positioning of the heads is simultaneously thanks to the independent converters of each head.
The N.2304 cutting tables are built with a steel structure with a rectified upper plane, on which the motorized transport belt rests with a rubber-coated outer surface to prevent the displacement of the material during the cutting phase. A device to stop the stone, located on the table of the second crosscutter, allows to greatly reduce the times during the crosscutting process.
The table N.2590, located at the exit of the longitudinal cutter, has a system of physical stops, actuated pneumatically, that allows the selection of the strips that have been previously cut according to the width for their subsequent processing in the longitudinal cutter.
The second table N.2585 has a dragging device to join and align the strips prior to their processing in the transversal cutter, as well as the removal of longitudinal waste.
The unloading tables with band N.2426 have a frame built based on steel profiles with a transport band for unloading the cutting table, simultaneously, while the crosscutter already receives the next board and is ready to cut.
The Robot – Palletizer N-3530 (optional) with vacuum suction cup, is specially designed to perform automated palletizing tasks, based on the same operating principles applied in standard Nodosafer palletizing, and offers multiple advantages, optimization of work process , reduction of cycle times and efficient use of downtime. The reception suction cup, of particular design, is made up of a rectangular plate, capable of supporting horizontal loads of up to 120 Kgs.
Work areas are protected, limiting access to risk areas by means of protection fences and photocells, to avoid any risk of accident.
All machines and heads are equipped with an implantation system with centralized greasing for quick and easy maintenance.
In the electrical and control installation section, it is worth highlighting the implementation of state-of-the-art automatons with programs custom designed by our technical department, so that the programming of the machines is as simple as possible for the operators, avoiding thus wasting unnecessary time. The programming of the work cycle and the visualization of its sequence is carried out on two operator terminals with a screen, where all the work parameters are displayed, as well as the cutting cycles.
The cutting line N.2990/2200-5+7C basically consists of:
– 1 Intermediate table with motorized plastic rollers, model N.2274.
– 1 Transversal cutter with 7 Ø600 heads and mobile bridge, model N.8000-T-7C.
– 1 Longitudinal cutter with 5 Ø600 heads and mobile bridge, model N.8000-L-5C.
– 2 Cutting tables with motorized band, model N.2304.
– 1 buffer table for sheet metal selection, model N.2590.
– 1 Double displacement table with motorized rollers, model N.2585.
– 2 Motorized band tables for material output, model N.2426.
Nodosafer
Spain
Nodosafer S.L.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Slab Cutting MachinesCNC Bridge Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Denver Tecnika 5 axes monoblock bridge sawing machine.
The evolution of the most famous high-performance monoblock saw machine on the market.
Denver
San Marino
Denver S.p.A.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Slab Cutting MachinesCNC Bridge Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
VICTORY Bridge Cutter with Rotating Head equipped with an automatic head rotation system of 0° and 90°. The head movements in 3 axes plus the inclination of the head for miter cutting, allow high-speed cutting of boards and increase productivity by more than 30% compared to conventional bridge discs.
With the automatic head tilt, the 45° miter cut can be done very quickly and simply.
Automatic work programs for complete exploded views of boards thanks to rotation and the new software.
Automatic adjustment of the tool rotation speed depending on the type of material to regulate tool wear and energy consumption.
All this makes the VICTORY Bridge Cutter with Rotary Head V2 a practical solution that offers high productivity and space savings.
Cruz CNC
Spain
Cruz CNC Technology S.A.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Factory Cleaning EquipmentsWater Treatment Equipment
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite
Machinery Function Features:
It is very important to cover the filter press not only to protect it against adverse weather conditions, but also to safeguard the clothes, which can be damaged by the direct sunlight.
Fraccaroli & Balzan
Italy
Fraccaroli e Balzan Spa
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Slab Cutting MachinesCNC Bridge Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Numerically Controlled 5 interpolated-axis bridge saw equipped with tilting head and fixed table to carry out any type of machining, cutting (straight or shaped, vertical or inclined), 3D profiling and milling operations, on slabs and stone blocks. This machine can work one shot or step by step to shape marble, granite, composite stone and ceramic pieces. The 4.250 mm stroke of the bridge guarantees easy machining of large sized slabs or stone blocks.
Brembana sprint is also available with the following configurations:
- cutting line equipped with a belt working table (BT)
- cutting line equipped with a motorized roller working table (RS)
- pendular machining
- with an automatic unloading system of the pieces
Advantages:
- unrivalled mechanics
- motion accuracy
- limitless technology with a powerful electrospindle ISO 50
- +33% productivity without any manual movement thanks to the vacuum manipulator
This machine can be very customized, it is the best solution for large sized fabshop with high productivity of:
kitchen countertops
vanity tops
wall panels for interiors and exteriors
flooring
doorsteps, staircases and thresholds
street furniture
CMS Stone Technology
Italy
CMS Spa
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Handling, Loading MachinesStone Tools Machinery
Warranty: 12 Months
Usage: Granite, Marble
Machinery Function Features:
Manual gluing bench for steps STRAIGHT EDGE or L which are made by the cut slabs at 45°. It is necessary to assemble the exact steps and reduce the working time. Maximum working size 60x120 cm. Special dimensions upon request.
CompactLine
Italy
Ferrari & Cigarini SRL
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Surface Processing Machines Arm Polishing Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Basalt, Quartzite
Machinery Function Features:
Knee-lever machine "Gran-2" is designed for grinding and polishing flat surfaces of natural stone products.
The main advantages of this stone processing equipment are:
Hydraulic clamping of the tool to the workpiece, which greatly facilitates the work process, increases productivity and ensures high quality processing.
Two speeds of rotation of the spindle, allowing not only to use different types of tools, but also to work with any type of stone.
Electric drive for lifting / lowering the traverse, which makes it possible to process products up to 350 mm thick and blocks up to 1000 mm high.
Chrome plated vertical column and quill, resistant to wear and deformation, and does not require frequent lubrication.
Wiring diagram equipped with interlocking and protection components, which ensures high operational safety in high humidity conditions.
The machine is equipped with faceplates for grinding segments such as "Frankfurt", "FAT", "AShK". Faceplates for any type of tool - "Fickert", grinding wheels are made on request.
Experimental Plant
Russian Federation
Experimental Plant LLC
Contact Supplier
Have a Question? Ask our expert
Ask now
