2024-04-13 08:56:54
Match Your Image Post Your Needs

Manual Stone Finishing Machine

( 10 )
  • Granite Kerbstone / Curbstone Cutting Machine Line
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Finishing, Profiling MachinesMultipurpose Manual Machine

    FOB Price:$35000-58000

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    kerbstone Cutting Machine Line DFLSX1200-13S
    This machine line is mainly for cutting slab width above 50mm, the machine cut with 10-14pcs of blade at the same time which will dramatically increase cutting speed and overal output, daily capacity can reach 30-35m³/24h.The machine is widely used for kerbstone, roadside stone, cobblestone and tombstone etc.
    Machine part:
    The machine line included one slicing machine(DF1200-12S) and one edge cutting machine(DF1200-1S), worker load thick slab to the slicing machine with a crane, after slicing machine finish cutting, the roller on worktable hydraulically lift up and transfer the stone to the next edge cutting machine.
    The edge cutting machine has hydraulic pushers to push all the stone with blade gap tight and together to ensure a precise cutting. After that, the cutting process is finished and ready for packaging.

    electrical part:
    Machine use Mitsubishi PLC control system, SIEMENS water proof button, Omron relays etc, the machine is equipped with remote control, worker can both use the controlling cabin or remote control during operation.

    Advantage:
    1.Segments saving: machine use multi-blade cut at the same time, every down cut is about 3-5mm(depends on stone and segment), which save segments consuming.
    2.Labor saving: the entire machine line only need one worker to attend to it, machine adopts rollers to transfer stone and sensors for automatic stop and operation.
    3.Workshop space saving: compared to other cutting methods, the machine need only 12*5m space when producing same capacity.

    Features:
    1. no cement foundation needed, easy installation and shipment(40’’ HQ).
    2. the main shaft adopts high frequency modulation treatment, which will be more durable and wear-resisting.
    3. machine uses main spindle and a vice spindle to seal all saw blades together which can ensure the machine stable while cutting hard granite.
    4. it uses a simple program of movement on the controlling box, easy for setting, operating, and maintaining.
    5. it adopts two hydraulic pillars(a set of hydraulic systems) on both sides of the machine to ensure the strength of cutting spindle lifting up and down.
    6. Unlike traditional stone cutting, it dramatically increases productivity and reduces labor cost and power consumption and it consumes less diamond segment per cubic meter of production compared to the traditional cutting machine.
    7. Cast iron is adopted in the main frame of the machine to make the machine more stable with less chance of vibration under the operating condition.
    8.The regular worktable length of the shaft is 1.6m(1.8m optional)



    The slicing machine use a main spindle and a vice spindle sealing together which can ensure the machine stable while cutting hard granite.


    Protectors for motor and wires to prevent from dust and water

    Cast-iron
    The spindle adopts High frequency modulation treatment, which will be more durable and wear-resisting
    Galvanized protector to the chain and gear for safty handling

    Complete Machine Line (1 Edge Cutting Machine + 1 Slicing Machine)
    Slicing Machine DF1200-12S Edge Cutting Machine DF1200-1S
    Dimension 5500×2300×2500mm Dimension 5500×4000×4500mm
    Diameter of blade 1200mm Diameter of blade 1200mm
    Number of blades 12pcs Number of blades 1pcs
    Max.cutting size 2500×1800×450mm Worktable size 2500×1800mm
    Worktable size 2500×1800mm Working length max 2500mm
    Weight 10t Max.vertical stroke 600mm
    Max.cutting depth 450mm Weight 9t
    Main motor power 55kw-6 Max.cutting depth 450mm
    Max.vertical stroke 600mm Main motor power 22kw-6
    It produces about 30-35m³ of stone every day (24h) and covers a total space of 12m*5m.
  • Hefesto Multifunctional Manual Countertop Cutting, Polishing And Grinding Machine
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Finishing, Profiling MachinesMultipurpose Manual Machine

    FOB Price:

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Artificial Stone, Quartzite

    Machinery Function Features:

    The Hefesto multifunctional machine was developed for the transformation of marble and granite. Easy to handle and high in performance, it allows processing stones in various formats, reducing work time and differentiating the products presented to the market.
    With the HEFESTO multifunctional machine it is possible to:
    Italian recess;
    polishing:
    Cut;
    Internal polishing;
    Internal milling;
    Corner frame;
    Corner polishing;
    Vertical drilling;
    grooves;
    Thickness milling;
    Brushed;
    Bisote;
  • MYYZ-1600 Stone marble granite table top cutting machine
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Finishing, Profiling MachinesMultipurpose Manual Machine

    FOB Price:

    Warranty: 12 Months

    Usage: Granite, Marble, Artificial Stone, Basalt

    Machinery Function Features:

    Stone round table top cutting machine and round table polishing machine
    marble table top cutting machine and round table polishing machine
    granite table top cutting machine and round table polishing machine
    Eaststar strictly pursues “Quality first and service-oriented” as its business philosophy, It gathered top qualified technicians in this industry, focused on a scientific management system and paid attention to every detail in production, now Eaststar machine has achieved great improvement in the aspect of stability, precision, durability and production cost savings.
    stone round table making machine, cutting machine adopts single arm type structure, through the adjustable speed motor drives the discto rotate, round edge grinding a molding. change thea disadvantages of manual is not uniform, Iowefficiency, consumption and accuracy, improve the overall production efficiency and processing sizecan be, customized according to customer demand.
    CNC for option, and cutting & polishing two in one .
    Product name Unit MYYZ-1600
    Main motor power kw 5.5
    Overall size(L*W*H) mm 1500*1000*1400
    Disc diameter mm 1000
    Round table size mm 500-600
    Speed motor power kw 1.5
    Approximate weight kg 1300
    Hot Tags: stone round table making machine, China, suppliers, manufacturers, factory, price, new technology
  • Sinkhole Cutting Machine, Countertop Slab Cutting Machine
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Finishing, Profiling MachinesMultipurpose Manual Machine

    FOB Price:$9000-11900

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    marble and granite multi-function sinkhole cutting machine .
    Automatic operation to cut all kind of sinkhole.
  • Multi Disc Cutting, Profiling, Grooving Multipurpose Manual Machine
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Finishing, Profiling MachinesMultipurpose Manual Machine

    FOB Price:

    Warranty: 12 Months

    Usage: Marble, Limestone, Onyx, Sandstone, Travertine

    Machinery Function Features:

    This machine is considered a multi purpose machine, which can be used for cutting, profiling, decoration making and lining by using a long shaft supported from two sides.On this machine a strips of minimum 8 mm up to 600 mm can be cut and profiles up to 600 mm can be made and any decoration using profile disc can be made with high productivity
  • Universal SNM-PM Mono-Block Profiling And Cutting Machine
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Finishing, Profiling MachinesMultipurpose Manual Machine

    FOB Price:

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    The SNM-PM is a heavy-duty high precision mono-bloc profiling and cutting machine suitable for all factories working in the stone industry. When equipped with suitable tooling it is capable of working marble, granite, cement, etc. It is easy to handle and maintenance free.
    This machine is equipped with a laser device for very precise copying of profiles and has an optional feature of two diamond blades that doubles its profiling capacity.

    Main characteristics:
    Head guide ways are in hard chrome.
    Main structure is made of heavy-duty steel to ensure maximum stability and quality over time.
    Table's sliding surface is made of very thick plates.
    Bridge is made of a very stiff box-type frame and the base of the slide ways is directly machined on it.
    Table slide ways are hardened and work in oil.
    Replacement of slide ways is quick, inexpensive and enables the machine to keep its accuracy indefinitely.
    Metal shoulders replace conventional concrete walls, facilitating installation and transport of the machine.
    Disk is directly mounted on the motor and the machine is suitable for inclined cuts from 0° to 45°.
    Driving systems inside gears are case-hardened before final grinding.
    Machine is equipped with an insulated electric panel.
    All parts are mass-produced, safe and of high quality.
    Machine has very low maintenance costs.
    Electric vertical, horizontal and lateral displacements.
    An articulated control pendant enables the operator to control the most important commands for the head (Back/Forward and Up/Down) and a potentiometer to control the speed for both cutting directions.
  • Automatic Quartz Stone Hole Cutting & Grinding Machine
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Finishing, Profiling MachinesMultipurpose Manual Machine

    FOB Price:$15000-40000

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Artificial Stone, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    Automatic quartz stone hole cutting & grinding machine
  • T108S V4 Multifunction Manual Machine for milling, polishing, drilling, profiling, cutting
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Finishing, Profiling MachinesMultipurpose Manual Machine

    FOB Price:

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite

    Machinery Function Features:

    Manual multipurpose machine
    The T108S V4 offers more than 25 functions on all types of material (granite, marble, concrete, agglomerates).
    You just have to change the tools and the parameters to be able to mill, polish, drill, profile and saw…
    Moreover, most of the options can be adapted in a second stage on the machine.
    A multipurpose manual machine
    The positioning of the pieces is made in a very simple and quick way thanks to clamping by vacuums on the whole surface of the tilting granite table.
    The large working capacity (machining of pieces up to 3 m length) combined to a maximum vertical stroke of 400 mm allows processing kitchens of large dimensions as well as massive pieces for decoration and monuments.
    The vertical pneumatic pressure gives an unequalled quality to polished surfaces.
    A handy and ergonomic machine
    The BT40 cone allows changing the tool very easily (no wrench, no efforts …).
    A joystick controls the motorized moves, 4 vertical positions can be memorized.
    The colour touch screen allows to visualize and program very easily the different parameters: the sequences, the speeds, the tooling types (54 tools), the automatic drilling (4 programs)
    In series, the automatic vertical oscillation, as well as the pneumatic pressure, allows to get an unequal polishing quality and to optimize the life of the tools, for the work of edges as well as for the drain boards.
    Quality, precision, reliability
    The manufacturing of welded structure elements, the painting and assembling is made in our own workshops, which allows ensuring the quality of the manufacturing at all stages.
    All the elements are oversize. The granite table 120 mm thickness ensures excellent reliability and extreme precision.
    Spindle motor (6,1 kW(S6) at 1500 rpm) Variable speed from 250 to 10000 rpm.
    New polishing “satellite” head from THIBAUT
    The satellite head is used for polishing and calibrating flat surfaces. It is capable of obtaining a very high quality of polishing with high efficiency. Its head has a diameter of 215 mm and is equipped with a BT 40 attachment.
    The three abrasives have a maximum height of 70 mm. You can use either conventional abrasives or resin abrasives.
    For textured surfaces, it is more suitable to use B3 head instead.
    The satellite head is compatible with multiple THIBAUT machines (only on THIBAUT) : T108S, T818 M4 & M5, T812, T858V2, T658, T958.
    https://www.thibaut.fr/en/machine-t108s-v4-manual-multipurpose-countertops-other-industries-other-materials-monument/
  • KONTUR Diamond wire rope cutting machine
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Finishing, Profiling MachinesMultipurpose Manual Machine

    FOB Price:

    Warranty: 12 Months

    Usage: Granite, Marble

    Machinery Function Features:

    The Kontur diamond-wire machine is used in stone-processing and ritual workshops and is intended for the profile processing of products made of artificial and natural stone with a maximum size of 1500 * 800 * 200 mm.
    The workpiece is positioned on a lever-rotary table and is fed for manual processing. The working tool is a diamond wire with a diameter of 8.7 mm, which makes curved cuts of any complexity. The rope is cooled by continuous water supply directly to the cutting area, which additionally ensures complete dust removal.
    Distinctive advantages of the machine are: minimum noise level in operation, low power consumption, compactness, simplicity and ease of use and low maintenance requirements.
  • Multi Purpose Workshop Type 4 Axis Machine - Cutting, Profiling
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Finishing, Profiling MachinesMultipurpose Manual Machine

    FOB Price:

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    Multi Purpose Workshop type 4 axis Machine - Cutting, Profiling
  • 1

Have a Question? Ask our expert

FAQ icon
Ask now
Clear All
Compare (0/4)
StoneContact
loading
Tips

Tell Suppliers what you want to buy

Tips

Submitted successfully, thank you!