Multi Blade Automatic Slab Cutting Line in Portugal

The Corta Topos multidisc, although serving the same purposes of Corta Topos single disc, get a much higher cut cadence due to the presence of multiple discs. The number of cross-cutting heads is variable depending on customer requirements, but overall is not common to find use with works for more than 8 heads. The machines with multiple disks are usually used for the tile cutting (thin plate), it may even be integrated sequentially in a cutting line, whereas the two heads machines are commonly used for the adjustment plates / blocks to a given length .
Automatic positioning of the heads with each other is also another factor in the increase of production. To avoid the handling of stone between each cut, which can represent a large share of the overall cycle time, there is an additional gain in production that goes beyond obtained with the simple addition of cutting discs.
In addition to sharing characteristics with cuts Topos single disc, with multi add the following:
High Court cadence;
cutting measures through automatic positioning of the heads together with electronic counting of high precision, with parameterization through the control panel;
MECHANICS
This is a cutting machine in metal construction with structure rolled steel electro-welded with electric drive axle for geared motors with electronic speed variation. cutting axis and positioning supported by linear guides and vertical shaft supported by ball screw with electronic counting encoder or fixed with rise / fall air.
The materials used in its construction were carefully selected for quality parameters, given a longer life on a machine facing harsh working conditions on a day-to-day normal operation.
COMMAND
Programming and monitoring of the automatic cycle through programmable console with the aid of control levers positioned on panel and / or pendant.
The controls are designed and manufactured so that its layout, its course and effort required to operate are consistent with the commanded action, taking into account the constraints due to the necessary or foreseeable use of personal protective equipment such as for example, the gloves.