2025-02-18 15:59:26
Match Your Image Post Your Needs

Multi Blade Vertical Gang Saw

( 6 )
  • STANDISH Multi-Blade Gang Saw- Block Cutting Machine
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Block Cutting MachinesMulti Blade Gang Saw Cutting Centre–Vertical

    FOB Price:

    Warranty: 12 Months

    Usage: Marble, Limestone, Sandstone, Travertine

    Machinery Function Features:

    The STANDISH MULTI-BLADE SAW is designed for cutting slabs of stone to various widths to use
    for veneer, lintels, treads, sills, etc. This machine greatly increases production because of its ability
    to make multiple cuts at one time as opposed to using a single-blade circular saw. One of our
    multi-blade saws currently in use has 25 blades making cuts 2” apart in one pass.
    The STANDISH MULTI-BLADE SAW features:
    • 40” or 48” Diameter Diamond Blades
    • Normal Blade Tip Speed—10,000 Ft. per minute
    • Furnished with blade spacer kit according to customer’s job needs
    • Throat Capacity of 66” Wide x 18” High (48” Blades), 14” high (40” Blades)
    • Furnished with equipment required to install and remove blades
    • Blade arbor is quickly interchangeable for changing different blade spacing.
    • Normally mounted over a wood slat conveyor.
    • Requires power supply for 400 H.P.
  • WSM80 Multi Blade Diamond Marble- Granite Gang Saw Block Cutting Machine
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Block Cutting MachinesMulti Blade Gang Saw Cutting Centre–Vertical

    FOB Price:$110000-115000

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Onyx, Quartzite, Travertine

    Machinery Function Features:

    The frame saw is mainly composed of saw frame, chain rod, column frame, saw blade and other components. Its working principle is that the saw blade mounted on the saw frame reciprocates with the saw frame under the drive of the connecting rod, and at the same time, it continuously feeds downward through the lifting transmission mechanism, thereby realizing the sawing processing of the stone.
  • WANLONG QSQ-2200/2500/3000 Multi-Blade Block Cutting Machine
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Block Cutting MachinesMulti Blade Gang Saw Cutting Centre–Vertical

    FOB Price:$27000-520000

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    QSQ2200/2500/3000 combines different diameters of blades working simultaneously as multiblade cutting. It has screw-rod lifting system and hydraulic lifting system for choice. The crossbeam moves for feeding so that the table for block is not necessary ( which does not supply along with machine, only available upon request ). Heavy duty strcuture, logical control system, easy operation together with " Wanlong" blade give high production and also make the finish slab with flat surface, no tapper.
    It is also flexible in modification for Single blade cutting.
  • NT2 60+SM - Cutting Centres for Granite Blocks
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Block Cutting MachinesMulti Blade Gang Saw Cutting Centre–Vertical

    FOB Price:

    Warranty: 12 Months

    Usage: Granite, Basalt, Quartzite

    Machinery Function Features:

    These cutting centres that range from 50 to 60 discs, are made up of two different and independent units. The first unit is used for vertical cutting, the second unit for horizontal cutting on mobile bridge, which allows the horizontal disc to enter the cutting cycle after several vertical cuts have been carried out.
  • NT4 - Block cutter with 4 columns for marble
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Block Cutting MachinesMulti Blade Gang Saw Cutting Centre–Vertical

    FOB Price:

    Warranty: 12 Months

    Usage: Marble, Limestone, Onyx, Sandstone, Travertine

    Machinery Function Features:

    Block cutter with 4 columns that can install up to 2 vertical discs with variable diameter of 1300 or 1700 mm. NT4 can be equipped with an automatic unloader of strips mod. AEREO NT4 (optional) and a block carrying trolley (optional).
  • Modulgranito -Pedrini Arco di Trionfo M594-M595-M596 Cutting Center for Granite Blocks
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Block Cutting MachinesMulti Blade Gang Saw Cutting Centre–Vertical

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    High production cutting centre for sawing granite blocks into strips.
    It is composed of three main units: vertical discs unit, horizontal disc unit and automatic unloader unit.
    Arco di Trionfo works on stationary block and it is manufactured in different versions according to the number and diameter of the vertical discs. It is used both for the production of strips for modulgranito and for up to 100 mm thickness elements for exterior paving.
    This machine, that operates on stationary blocks, cuts and deposits on pallets 460/650 max. wide strips with thickness dimension from 10 mm for modulgranito up to 80 mm for paving stones.
    The machine can work even without block carrier trolleys since all movements are performed by the operational units.
    The large machine dimensions allow for optimal workforce utilization, easy use and very reduced dead time even in case of small blocks processing.
    ARCO DI TRIONFO maintains in time top cutting precision with minimum diamond disks consumption and very reduced costs for production maintenance and depreciation.
    The unit for vertical cuts, that comprises two bridge holding mobile uprights connected by one structural arc, is an extremely rigid and heavy structure, made in normalized large thickness steel work, with the two very large foot bases laying in a stable and consistent way on the track ways that are fixed onto the foundations.
    The discs holder trolley, driven by a gear motor/pinion/rack system, slides along two “V” guides in oil bath with the interposition of anti friction slides. In addition to this,four contrast wheels compact trolley and bridge to realize a “clearance-free” trolley sliding system.
    The discs stack, that is positioned on the trolley/bridge/mobile uprights assembly centreline, favours the whole discs holder trolley mass to integrate in a balanced way the contrast wheels action.
  • WSM80 Multi Blade Diamond Marble- Granite Gang Saw Block Cutting Machine
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Block Cutting MachinesMulti Blade Gang Saw Cutting Centre–Vertical

    $110000-115000

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Onyx, Quartzite, Travertine

    Machinery Function Features:

    The frame saw is mainly composed of saw frame, chain rod, column frame, saw blade and other components. Its working principle is that the saw blade mounted on the saw frame reciprocates with the saw frame under the drive of the connecting rod, and at the same time, it continuously feeds downward through the lifting transmission mechanism, thereby realizing the sawing processing of the stone.
    new
  • WANLONG QSQ-2200/2500/3000 Multi-Blade Block Cutting Machine
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Block Cutting MachinesMulti Blade Gang Saw Cutting Centre–Vertical

    $27000-520000

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    QSQ2200/2500/3000 combines different diameters of blades working simultaneously as multiblade cutting. It has screw-rod lifting system and hydraulic lifting system for choice. The crossbeam moves for feeding so that the table for block is not necessary ( which does not supply along with machine, only available upon request ). Heavy duty strcuture, logical control system, easy operation together with " Wanlong" blade give high production and also make the finish slab with flat surface, no tapper.
    It is also flexible in modification for Single blade cutting.
    new
  • STANDISH Multi-Blade Gang Saw- Block Cutting Machine
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Block Cutting MachinesMulti Blade Gang Saw Cutting Centre–Vertical

    Warranty: 12 Months

    Usage: Marble, Limestone, Sandstone, Travertine

    Machinery Function Features:

    The STANDISH MULTI-BLADE SAW is designed for cutting slabs of stone to various widths to use
    for veneer, lintels, treads, sills, etc. This machine greatly increases production because of its ability
    to make multiple cuts at one time as opposed to using a single-blade circular saw. One of our
    multi-blade saws currently in use has 25 blades making cuts 2” apart in one pass.
    The STANDISH MULTI-BLADE SAW features:
    • 40” or 48” Diameter Diamond Blades
    • Normal Blade Tip Speed—10,000 Ft. per minute
    • Furnished with blade spacer kit according to customer’s job needs
    • Throat Capacity of 66” Wide x 18” High (48” Blades), 14” high (40” Blades)
    • Furnished with equipment required to install and remove blades
    • Blade arbor is quickly interchangeable for changing different blade spacing.
    • Normally mounted over a wood slat conveyor.
    • Requires power supply for 400 H.P.
    new
  • NT4 - Block cutter with 4 columns for marble
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Block Cutting MachinesMulti Blade Gang Saw Cutting Centre–Vertical

    Warranty: 12 Months

    Usage: Marble, Limestone, Onyx, Sandstone, Travertine

    Machinery Function Features:

    Block cutter with 4 columns that can install up to 2 vertical discs with variable diameter of 1300 or 1700 mm. NT4 can be equipped with an automatic unloader of strips mod. AEREO NT4 (optional) and a block carrying trolley (optional).
    new
  • 1

Have a Question? Ask our expert

FAQ icon
Ask now
Clear All
Compare (0/4)
StoneContact
loading
Tips

Tell Suppliers what you want to buy

Tips

Submitted successfully, thank you!