Onyx Hand Held Machines in Italy

Galaxy- Hydraulic Cutting Machine with disc
This cutting machine was projected because OMA SYSTEM wished to fill the void existing between an expensive and massive product, such as CNC machine, and the portable blender. The result is a machine that can realize straight, oval, shaped and multi-directional cuttings. It can be used free hand, with a template or following a line directly designed on the slab. Furthermore, with opportune optionals it is possible to realize no-slide canals.

Master 3500 is a portable electric contouring machine with “Water System” base board which creates a gliding water film between the machine and the slab. This system immediately eliminates the stone pieces broken during the working without scratching the surfaces. The Master 3500 machine is built with high-quality material, only coming from the best suppliers. This product is produced with the highest standards and is certified by international and European standardization organizations.

Manual machine for non-slip scratching machining work, flat and round edges on marble. Mounted on a RUPES electronic machine, with speed converter ranging from 1500 to 4500, it is available in 50 mm or 100 mm version for flat machining also with extraction hood (only for Rotograf 100). The tools are made of the highest quality pure widia and can be reground, thereby lengthening their lifespan. Total weight 7kg (Rotograf 50) and 10kg (Rotograf 100).
AVAILABLE MODELS
Rotograf 50 for manual scratching with 50mm roller, power 900W regular speed 1500/4000 rpm, roller pitch 1.5mm.
Rotograf 100 for manual scratching with 100 mm roller, power 1100W regular speed 1500/4000 rpm, roller pitch of choice 1.5mm or 2mm.

Monday is better with #promosofi
Our SUPER GPW-218L suitable for #sanding / wet air #polishing of granite, marble, porcelain, artificial stone and other kinds of stone and wind fiber in SUPER PROMO.
- 4500rpm
- Rear exhaust
- ON/OFF switch
FREE N. 1 PAD in natural rubber with reinforced hook!
Video wet Air Polisher/Sander Air Hose Install:
https://youtu.be/EKKjMc0sKC8
Write on direct for further information
*The indicated prices are VAT excluded*

Transform your angle grinder into an unerring beveling machine to make a chamfered edge without any difficulty, also on hard materials.
WHICH PROBLEM DOES IT SOLVE FOR THE STONE FABRICATOR?
Easybevel allows you to bevel any kind of stone and ceramics with the highest precision and finally forget the nightmare to fix the angle of beveling: you do not need to hold it at a certain angle, you just fix the desired angle at the beginning and move the machine from the left to the right.
STONE PROCESSING TYPES
Bevel from 0,1 to 10 mm x 45°
WHAT WILL YOU LOVE IN THIS BEVELING MACHINE?
smooth gliding
lightness and handiness
specific diamond tools for ceramics and Grès Porcelain stoneware

Mini axial lapping machine, DREMEL
Speed rpm.:10000-30000
Volts: 220/240 AC
Power: 125W
Tool holder: 3 mm – 2.35 mmm
Mini axial lapping machine, DREMEL brand, for sculpture and carving purpose.
SKU: 165
Category: Electric tools

Manual machine for satin finishing on marble. Mounted on a 1100W RUPES electronic machine with speed converter ranging from 1500 to 4500 rpm. Available with roller with width of 100 mm. Total weight 10kg. The tool is coated in the finest quality pure synthetic diamond.

GPW-221L latest #innovation of 3600 rpm wet air stone polisher.
EQUIPPED WITH SPANNER FREE SYSTEM
What are the #benefits
- Changing the pad becomes child's play
- Prolongs the life of the gears
- No more worries about the durability of the velcro on the backing pad
- Safety design
FREE N. 1 PAD in natural rubber with reinforced hook!
Always #thebest for our customers!!
For further information write on direct
*The indicated prices are VAT excluded*

This high performing saw is made of stainless steel and aluminium. The power of the motor guarantees 45° miter cuts up to 3 cm thickness of all materials (granite, marble, quartz, composite, Dekton, Neolith, Lapitec, Laminam, etc.) and straight cuts up to 4 cm material height.
VEKTOR TECHNICAL DATA
- Mechanical structure in aluminum and steel
stainless
- Stainless steel spindle
Rotation speed: 8000 rpm
- Supply voltages: 230V / 50Hz single phase
115V / 60Hz single phase
- Residual current circuit breaker on the cable
of the device.
- Thermal protection inside the engine
- Dimensions: 540 x 375 x 305 mm, weight 19.5kg
- Recommended disc Ø180 mm (Ømax = 200 mm)
- Stainless steel rails: 1500 mm (connectable)
- Packaging: in a cardboard box

ART.162 PORTABLE SHAPING MACHINE AND PROFILING DIAMOND WHEELS FOR MARBLE AND GRANITE

The TWISTER PLUS is a patented portable machine for shaping and polishing, core drilling, milling, bush hammering, creating recessed plains, honing flat surfaces, cutting etc.
It is provided with nylon anti scratch sliding wheels and water jet holes.
It could be also provided with a base plate with water planing system.
The Twister Plus has a speed regulation from 2000 to 6000 rpm.

The TWISTER 97 is a portable combined hydraulic machine that can perform three different operations.
Infact it can be used for:
1) profiling, trimming and polishing marble and granite slabs from 20 mm to 100 mm with the help of diamond wheels perfectly shaped
2) effecting straight cuts, curved and ecliptical
3) smoothing and honing flat surfaces.

the version with speed regulation and rotation direction inversion with buttons and trimmers
https://youtu.be/wJ0mdiQCCeM
the version with rpm regulation and rotation inversion with display commands or remote control
https://youtu.be/zewfixUwOlE
the version with more powerful 500 w motor, dislpay controls and modifiable side handle
https://youtu.be/Y62boq2mEeQ
always the 500 w version and display commands with the modified side handle, in this case no longer lateral but a throttle type setting
PATENTED TOOL FOR SANDING, POLISHING AND CRYSTALLIZING SMALL SURFACES IN MARBLE, GRANITE AND OTHER
MAKES DOUBLE THAN A NORMAL FLEX
NEW VERSIONS OF THE SINGLE FLEX. WITH BUTTON CONTROLS, OR WITH DISLPAY, OR WITH REMOTE CONTROL
NEW PATENTED VERSION OF THE FLEX WITH ITS WATER TANK
UNIQUE POSSIBILITY TO REVERSE THE DIRECTION OF ROTATION, AND ADJUST THE REVOLUTIONS.
THE FACT OF BEING ABLE TO REVERSE THE SENSE OF ROTATION (NS PATENT) IS AN ABSOLUTE NOVELTY THAT ALWAYS RENEWING THE POINTS OF THE ABRASIVES OR POLISHERS SHORTEN THE PROCESSING TIMES BY AT LEAST 30% AND THE POLISH IS BETTER.
SAFE, QUIET, RELIABLE, EASY TO USE, WORKING IN DIRECT CURRENT WITH ITS SUPPLIED POWER SUPPLY, WITHOUT RISK OF SHOCK
IT WORKS WITH ITS WATER TANK SO ZERO DUST, BUT ALSO VERY LOW SPLASH (NOTHING UP TO 1000 RPM) SO YOU DON'T NEED TO MASK AND START WORKING IMMEDIATELY.
THIS MODEL CAN STILL BE USED FOR VERTICAL WORK AS IT DOES NOT HAVE AN EXCESSIVE WEIGHT. BUT BEING HEAVIER THAN A NORMAL FLEX, IT EATS MORE.
REGULATION OF TURNS FROM 80 TO 3000
AVAILABLE THE FOLLOWING VERSIONS BOTH WITH BUTTON CONTROLS AND ROTATION ADJUSTMENTS, DISPLAY, AND WITH REMOTE CONTROL:
350 W MOTOR HOLDING 100 MM PAD, TOOL WEIGHT 4.7 KG
500 W MOTOR HOLDING BACKING PAD FROM 125 TO 180 MM TOOL WEIGHT 6.3 KG
AVAILABLE BOTH WITH HANDLE TYPE MANETTONE ABOVE THE ENGINE AND WITH SIDE HANDLE, WHILE THE OTHER HANDLE IS ALWAYS REAR
even the model with 350 w motor which normally mounts a pad diameter 100 mm, can also be mounted up to a diameter of 150 mm for certain processes
STILL OTHER MODELS OF THE SINGLE FLEX, AT THE BOTTOM OF THIS PAGE ARE THE REDUCED FLEX, AND THE SINGLE FOR VERTICAL FLEX-
THE REDUCED FLEX HAS IN ADDITION TO THE REVERSAL OF THE SENSE OF ROTATION AND REGULATION OF THE SPINS, THE POSSIBILITY OF MOUNTING A LARGE DISC OF 30 (BUT ALSO 43) CM IN DIAMETER-
WHILE THE FLEX PER VERTICAL IS THE LIGHTEST OF ALL FOR A USE OF THIS KIND
SINGLE FLEX-ANGLE GRINDER FOR MARBLE
THE VERSION WITHOUT SPEED REGULATOR FOR SANDING AND POLISHING MARBLE WITH ITS WATER TANK ON BOARD
THE SINGLE FLEX IS THE VERSION WITH A SINGLE MOTOR COMPARED TO THE DOUBLE FLEX
FOR SANDING AND POLISHING SMALL SURFACES WITHOUT THE MINIMUM DUST
WORKS AT 24V CONTINUOUS
TANK AND WATER TAP ON BOARD
BACKING PAD WITH VELCRO DIAM 100 MM
VERY QUIET, STURDY RELIABLE
WATCH THE VIDEO
https://youtu.be/GfACaVigsqY
MOUNTING PAD M14
BEING LIGHTER THAN THE DOUBLE FLEX, IT IS PERFECTLY PERFECT FOR VERTICAL WORKS
IT CAN ALSO WORK AT 12 V WITH CAR BATTERY THAT GIVES IT 5 HOURS OF AUTONOMY
WE RECENTLY MADE THE VERSION WITH SPEED REGULATOR
THAT ALLOWS TO CHANGE THE ROTATION FROM 80 TO 2800 RPM
YOU CAN USE FOR EXAMPLE:
80-120 REVOLUTIONS TO CRYSTALLIZE
300-500 TO POLISH
2800 REVOLUTIONS TO SAND
UP TO 1000 RPM, THE SPLASH OF WATER IS ALMOST NOTHING
WATCH THE REAL VIDEO
https://youtu.be/bvYtO24ehhw
REDUCED FLEX
https://youtu.be/Wdzx7orsNuc
mounts a 30 cm diameter disc, but can also mount a 43 cm disc.
thanks to its mechanical characteristics it can also withstand a very high weight on it. we can crush as much as we want so that the engine does not slow down.
it has the inversion of the direction of rotation, the regulation of revolutions from 60 to 550 rpm.
for these low rotations it does not dirty anything, there is no need to disguise.
having a large disc and being able to apply a lot of weight is ideal for both polishing and crystallizing.
its maximum speed is the optimal one for polishing with the advantage of the large diameter of the disc.
for example, polishing steps with this particular tool is very easy and fast, alone without help, without dirtying anything,
as even if you have to crystallize steps or other, it is the most comfortable and fastest tool for these things, thanks to its large disc.
the tool like all the others works at 24v with its power supply, and has a water tank and tap on board
weighs 5.7 kg
SINGLE FLEX FOR VERTICAL
https://youtu.be/vGzF4hZ5xq8
with the water tank in position for horizontal work
always with tank for horizontal work
above instead with the water tank and also the tool positioned vertically
always with the tool for vertical work