Post Your Needs

Quarry Machines in Italy

( 96 ) Have Prices

The adventure of stone begins in quarry. It is excavated in high mountains, on hills with no roads, clean and pure veins are sought and they are tried to be extracted in blocks with large construction machines. It is really troublesome because it is a heavy material and you often have to struggle with nature as well. Heavy machinery is needed, from road construction to block removal, to large trucks loaded into factories or containers. You can see all of these quarry machines with their technical details on Stonecontact.com and get in touch with their manufacturers directly. What we want from Quarry owners is that they do not harm nature, and that they leave it in a way suitable for nature after mining is finished.

More Hide
Country:
  • Stone Crushers, Mills, Pulverizing Machines
    favorites
    Add To Compare

    Type: Quarry MachinesRock Crushers, Jaw Crushers

    Warranty: 12 Months

    Usage: Granite, Marble, Basalt, Quartzite

    Machinery Function Features:

    Mills and Crushers. Scope: building, chemistry, marble, limestone, dolomite, clay, talc, kaolin, bentonite, graphite, gypsum, chalk, ...
    Air classifiers, rotary-drum dryers, sieve
  • Series 1000 - Diamond wire cutting machine for quarry
    favorites
    Add To Compare

    Type: Quarry MachinesQuarry Wire Saw Machine

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    Wirecutter of last generation, it can be considered as a landmark in its field. It can be used on all the types of marble, granite and stone, with top performance and life of the diamond wire, at maximum cutting speed. The whole controls are fully automatic and don't require the constant presence of the operator.Technical features:

    Diamond wire running system by electric motor

    The electronic system of feed control is extremely accurate and complete, thanking to the combined action of two motors:

    • 2 HP motor for the quick positioning of the machine on the rail.

    • 0.5 Hp motor with automatic reduction gear for fine regulations.

    The feeding on the rail is performed on a double central self-cleaning rack with double gear wheel. This system allows the machine to work even in slope position, preventing the risk of sliding. The " S 1000" is featured by a special "electro-hydraulic" system for flywheel positioning. The rotation and a lateral movement of 40 cm per side are hydraulic, with solenoid valve control. A further lateral movement is possible by electric motor and endless screw. This system allows to perform ground level cuts and two parallel cuts, maximum width 2.0 mt. without moving the machine.

    Special feature:

    The machine is provided with special blower heating system for flywheel, to reduce icing during winter work.

    Technical details:

    Main motor power 50-60-75-100Hp

    Feed motors power 2 Hp fast - 0.5 slow

    Flywheel Ø 1000 mm

    Wire speed : 40 Mt / Sec.

    Width of cuts 0 - 2,0 Mt

    Total weight 1800 Kg.
  • MTO2V 10040 Sandstone, Tuff Stone Quarry Machine
    favorites
    Add To Compare

    Type: Quarry MachinesDouble Blade Mining Machine

    Warranty: 12 Months

    Usage: Sandstone

    Machinery Function Features:

    The Magisa machines represent a highly reliable product, both the operation, which for the duration, because constructed so craft , and with the precision of control machines .
    In the 40 years of experience in the construction of construction machinery, Magisa was able to use the active collaboration of the customer up to obtain patents. Magisa only builds with quality materials and parts selected with the utmost care, produced by known companies. The dislocation logistics of these companies allows easy retrieval of spare parts anywhere in the world. The production is diversified with a wide range of models, from 20 to 180 hp with different depths of cut.
    Magisa is able to meet special customer requirements thanks to the extreme possibility of customization of its machines. Another strong point of Magisaè machines ease of use by the operator, who is able to obtain from them the maximum yield in a short time.
    All the machines we manufacture meet the directives of the European Community (EC).
  • Terna CST 965 Quarry Backhoe Chain saws machine
    favorites
    Add To Compare

    Type: Quarry MachinesStone Chain Saw MachinesBackhoe Squaring Chain Saw

    Warranty: 12 Months

    Usage: Marble, Limestone, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    Chain saws machines, Stationary machines for laboratory / sawmill

    Chain saw machine

    The chain saw model CST 965 is a cutting chain mounted on the rear of a wheeled tractor cab, called Terna.

    The machine is self powered and is autonomous both in handling and positioning. It can perform vertical cuts up to the maximum depth of 3.25 meters on marble, limestone and stone materials of similar hardness. The machine is ideal for squaring blocks and for the making series of front cuts.

    Arms and chains are available for cutting up to 3.25 meters.

    Our company offers the possibility to mount the following chains in order to optimize cutting performance on different materials:

    chains 38/40/42 mm with 8 edges tools

    42 mm chain with 4 edges tools ;

    38/40/42 mm chain with PCD tools for hard stones

    TECHNICAL FEATURES

    Terna CST 965

    Arm rotation 90°

    Vertical stroke 3000 mm

    Orizontal stroke 2000 mm

    Available lenghts of arm (Useful cut) da/from 2 m – a/to 3.25 m

    Cut width 38-40-42 mm

    Weight of cutting unit 3500 kg

    Total weight, including tractor 10.000 kg

    Grease tank capacity 7 kg

    Grease capacity 0,3 – 1 kg

    Hydraulic oil tank capacity 150 litri / litres

    Diesel comsumption 7 – 10 l/h

    Round per minutes of the chain rotation pinion 65 rpm

    Round per minutes of the diesel engine 1400-1500 rpm

    Rear gear movement maximum slope 21%

    Accessories for chain saw

    VACUUM

    Vacuum designed to remove large quantities of dust and of the waste granular material produced by the chain saw cutting.

    The waste material is removed from the accumulation zone adjacent to the cut by means of a fl exible hose and of a suction cup.

    The vacuum can be installed on a trailer moving on the rails along with the chain saw.

    The waste material is deposited on the ground, in the opposite side of the cut.

    WORM

    Worm designed to carry and to remove automatically large quantities of dust and of the waste granular material produced by the chain saw cutting.

    The cut waste material is carried in the feed-box of the worm, and then deposited on the ground, at 2 meters distance from the cut.

    CHAINS

    1 – CHAIN PITCH 121MM

    Larghezza di taglio 38 mm

    Sono disponibili portainserti per utensili tipo:

    – WIDIA 8 Taglienti

    – PCD Ø 13 mm

    – PCD 8 mm

    2 – CHAIN PITCH 110MM

    Cutting width 42

    Available toolholders for tools type:

    – WIDIA 4 Cutting edges

    – PCD Ø 13 mm

    – PCD 9.4 mm

    3 – MONO-LINK CHAIN 74 MM PITCH

    Cutting width 42

    Available toolholders for tools type:

    – WIDIA 4 Cutting edges

    – PCD Ø 13 mm

    – PCD 9.4 mm
  • Quarry Equipment for Marble -In Stock
    favorites
    Add To Compare

    Type: Quarry MachinesQuarry Wire Saw Machine

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Sandstone

    Machinery Function Features:

    Description:
    no.1- CHAIN SAW-rotation arm 202 ° complete with n ° 1 arm - useful cut 2 or 3 mt - new chain (can fit all the chain models) - 9 meters of rails
    =================================================================
    no.1- X diamond wire machine with a speed of 40 m / sec - 50 HP- with protective film on the electrical parts - 360 ° rotation - with inverter for translation speed control and electronic board - complete with 6 meters track and flywheels - remote control panel. fully functional - (1 year warranty)

    =================================================================
    no. 2- diamond wire machines x MARBLE TYPE TURTLE with fixed flywheel with a speed of 40 m / sec- 60 HP- for heavy, large, horizontal and inclinated cuts, block squaring. The machines are equipped with a torque multiplier to start without an inverter and using over 100 ml of wire.Remote control panel. fully finctional (1 year warranty)
    ==================================================================
    no. 1 MATTEI compressor with wheels, KUBOTA diesel engine, 7000LT / MIN- 2 air conenctions NEW!!!!!!!!!!!!!!!!!
    ==================================================================
    no. 1 MATTEI 300 KV generator with IVECO diesel engine - NEW !!!!!!!!!!!!!!!!
    ==================================================================
    SINTERED DIAMOND WIRE FAUDI GROUP - LM 2.500 - 11.00 MM DIAMETER - 28 BEADS /LM NEW!!!!!!!!!!!!!!!!!!!!!!!!!
  • LGR1 Quarry Diamond Wire Saw Machine
    favorites
    Add To Compare

    Type: Quarry MachinesQuarry Wire Saw Machine

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    The LGR 1 machine was build for execution of little diamond wire cutting on marble, stones, etc., but also in order to solve problems in building and artistic processing. The effectiveness of LGR 1 machine is confirmed by the extreme ease of working and the processing and cutting speed of the diamond wire. Thanks to this system the operations can be carried out without dust, noise and vibration, being able to perform cutting of any thickness, size and slant on stones like squaring or preparatory bevelled cut of monuments, but also on reinforced concrete, like demolition of base, walls, pillars, stairs, bridges and roads.

    The possibility of disassembling the machine into three parts as well as its lightness make the transport easy into small yards and those which are difficult to access. Thanks to its characteristics LGR 1 machine allows to execute operations with diamond wire with the best conditions; in fact it can also carry out several cutting edges with different sloping degrees thanks to a total rotation (360°) of the engine flywheel unit and thanks to the manual slide which allows to obtain a perfect alignment between the machine flywheel and the cutting edge.

    The electronic control system allows the best use of the machine and of the diamond tool according to the characteristics of cutting. Lochtmans’ diamond wire cutting machines are equipped with accident prevention system in order to avoid risks for workers who operate or work near the machine, because the breaking of diamond wire can create projection of circuit elements (matchboards, spacers, springs or parts of cable) and the consequent whip action of the cable.

    LGR 1 machine is equipped with a very practical and functional protection system. Thanks to the protection racket and to a simple movement, it can be possible to set the fillet protection device in any positions of the flywheel engine. The protection device is extensible and it can reach all the open path of diamond wire, also when the machine is in motion. While the machine is moving the screen belt lets off covering the area where the diamond wire goes open, being an effective element of protection.
  • Magnum - Block Cutting and Drilling
    favorites
    Add To Compare

    Type: Quarry MachinesQuarry Drilling MachinePneumatic Drill Machine

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Sandstone, Travertine

    Machinery Function Features:

    Magnum is a pneumatic block cutting machine for vertical drilling, featuring a robust structure and a 10 wheel slide supporting trolley
  • HP100 - Tagliaroccia Vertical Computerized
    favorites
    Add To Compare

    Type: Quarry MachinesQuarry Heavy EquipmentsExcavator

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Sandstone, Travertine

    Machinery Function Features:

    HP100 - Tagliaroccia vertical computerized
    Tagliaroccia The HP 100 is the result of years of research and innovation. Energy is supplied from the hydraulic of the medium on which it is installed. The HP100 has replaced HP80, type of tire, which had a lower return. The current version has now been tested for many years and has been improved continuously. E 'a reliable machine, fast and low power consumption. E 'designed to be used on wheeled or tracked excavators owned by the customer, after analysis and preliminary study of the mechanical anchor and the hydraulic power.

    The remote control and remote control allow the operator to maneuver with ease and complete security. The single operator can manage all phases of work from the distance, without being subjected to vibration and noise exposure with a lot less.

    The on-board computer (Programmer Logic Controller) enables the machine to perform in a manner totally independent of the cycle work. It is able to make decisions with the actual conditions of the rock. Antincaglio a device enables the PLC to monitor the state of rotation of the foil avoid excessive mechanical stress that both torsional bending.

    The version with the laser allows the preliminary checking of the line of cut and then run the holes very accurately.
  • Crusher and 3 output Separation System 250-80M3
    favorites
    Add To Compare

    Type: Quarry MachinesRock Crushers, Jaw Crushers

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Sandstone

    Machinery Function Features:

    The 250-80 series include Stone Crushers with Special Blades and related accessories, such us Separators, Tipper Containers, Conveyor Belts (and others) are designed to recycle raw materials and scraps from processing of stone, marble, granite, porphyry, quartz, ceramics, building demolitions, similar material and glass, in small and large size, reducing the fragmented output for every requirement.

    Crushing process: it takes places due to a compression with a direct eccentric mechanism between different special plates (fixed and mobile), actuated by a transmission with trapezoidal belts, which can assume different levels of adjustment.

    Benefits: reduce the space of the same waste with its reuse in gardening, mosaic, road fills, furnishings and so on.
    The 250-80M3 Model is composed of the Crusher and 3 output Separation System, simultaneously at the crushing occurs a sectioned division of the crushed output into three customizable parts, replacing grids according to every need.
  • DHT Quarry Drilling Machine Martelli Mod. TH
    favorites
    Add To Compare

    Type: Quarry MachinesQuarry Drilling MachineHydraulic DTH Drill Machine

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Sandstone

    Machinery Function Features:

    Description:
    TECHNICAL SPECIFICATIONS

    Model DHT
    Rotation speed ---
    Tool diameter ---
    Drilling speed ---
    Drilling depth ---
    Weight of the machine from 19 up to 30 kg
  • Jaw Crushers
    favorites
    Add To Compare

    Type: Quarry MachinesRock Crushers, Jaw Crushers

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Sandstone, Travertine

  • Chain Saw Machine
    favorites
    Add To Compare

    Type: Quarry MachinesStone Chain Saw MachinesBank Chain Saw Machines

    Warranty: 12 Months

    Usage: Marble, Limestone, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    The chain saw machine model ”NF-7.1” is designated for the extraction of marble and stone blocks in the open sky quarries using the most recent technologies. The chain saw “NF-7.1” permits to improve the performances and to reduce to minimum the cost of the cut.
    The chain saw “NF-7.1” is universal: it can execute vertical and horizontal cuts on materials with compression strength higher than 150 Mpa. The movement of the machine is made through a sprocket and rack element assembled on the rails.
  • Fantini Bank Chain Saw Machine 70RA/P.AO
    favorites
    Add To Compare

    Type: Quarry MachinesStone Chain Saw MachinesBank Chain Saw Machines

    Warranty: 12 Months

    Usage: Marble, Sandstone, Travertine

    Machinery Function Features:

    The 70RA/P chain saw machine is the most popular model in the FANTINI range as well as being the best selling machine of its type in the world. First manufactured in 1979, 70RA/P models can be found in all the most important natural stone extraction centres, and have come to represent the byword for quality and reliability.

    It features a cutting capacity of up to 5.1 m and is even suitable for use with marble and other very hard stones. The machine is operated by a hydraulic system with variable capacity main pump driven by an electric motor, and can execute horizontal and vertical cuts without the need for water cooling. The electro-hydraulically operated controls guarantee power and speed in all operating conditions.

    Technical Specifications

    Installed power: 50 Kw

    Weight: 6,200-6,700 Kg

    Arm rotation: 360°

    Chain speed: 0-0.7 mt/sec

    Cutting width: 38 mm

    Effective cutting depth: 510 m max

    Cutting speed: 0-13 cm/min

    The technical specifications may be subject to change
  • Parts Chain - Stone Chain Saw Machines
    favorites
    Add To Compare

    Type: Quarry MachinesStone Chain Saw MachinesBank Chain Saw Machines

    Warranty: 12 Months

    Usage: Marble, Limestone, Sandstone

    Machinery Function Features:

    Parts Chain - Stone Chain Saw Machines
  • Quarry Chainsaw QST3000D ON CAT432d Backhoe
    favorites
    Add To Compare

    Type: Quarry MachinesStone Chain Saw MachinesBackhoe Squaring Chain Saw

    Warranty: 12 Months

    Usage: Marble, Limestone, Sandstone, Travertine

    Machinery Function Features:

    QST3000D chain saw machine on backhoe CAT432 is the last frontier for squaring blocks of marble and stones. QST3000D technology is driven by the very powerful motor of CAT432 and the hydraulic circuit for moving the chain saw was studied together with Caterpillar technicians and our technical staff.The advantages of this technology are a lot o : i.e. you can work day and night and in every weather conditions because the operator inside the cabin can decide the temperatures; you can work without using water ,etc...

    QST3000D works with CAT432 for positioning the blade using the control tools inside the cabin and you can modify the inclination using the stabilizers of backhoe; it's also possible to drive the chain saw trough a remote control outside the cabin.

    All movements for positioning the blade are on double chromate columns allows to have stability and stiffness; this system is unique and only Dazzini QST3000D use it; all movements are driven by single or double hydraulic cylinders (high reliability, simple and no maintenance costs).

    At the end of the cuts, with CAT432 is possible to remove the cuts' dust with only one operator with high safety and speed. CAT432 is 4x4 engine and it can move very easily between quarry's benches for reaching the blocks and starting to square, avoiding to use any other machines.

    QST3000D can use different chain, widiaholders and tools for giving the best cutting solutions for every kind of stones.

    Technical specification:

    •Base : CAT432D

    •Useful cut : 3.40 mt

    •Thickness : 38 mm

    •Chain speed : 0-1.5 mt/sec adjustable

    •Maximun high : 2.20 mt

    •Total lateral movements : 1.75 mt

    •Maximun cutting speed : 1 mt/min

    •Cutting tool : PCD or widia

    •Lubrifications by automatic pump with biodegradable grease

    •NO use of Electric supply
  • Air Compressor for Quarry - ATLAS COPCO XAS 405
    favorites
    Add To Compare

    Type: Quarry MachinesQuarry Air Compressors

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Sandstone, Travertine

    Machinery Function Features:

    AIR COMPRESSOR FOR QUARRY
    ATLAS COPCO XAS 405
    - year 1993
    - Mercedes motor
    - capacity 23000 lt.
  • Gran Fil- Diamond Wire Saw
    favorites
    Add To Compare

    Type: Quarry MachinesQuarry Wire Saw Machine

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Sandstone, Travertine

    Machinery Function Features:

    Gran Fil- Diamond Wire saw for cutting granite, marble with main motor power of 50 HP and double wire speed (17 and 25 m/sec)
  • TBC 90/2 HD-TBC 90/2 Heavy duty quarry drilling machine
    favorites
    Add To Compare

    Type: Quarry MachinesQuarry Drilling MachinePneumatic Drill Machine

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    Heavy duty drilling machine for one or two hammers, with automatic thrust adjustment, air motor for travel on the rail and air oiler. can be used for both vertical and horizontal drilling.
  • HP120 - Machine Spaccaroccia
    favorites
    Add To Compare

    Type: Quarry MachinesQuarry Hydro-Bags, Rock SplitterHydraulic Rock Splitter

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Sandstone, Travertine

    Machinery Function Features:

    HP120 - Machine spaccaroccia

    E 'designed to be applied on a telescopic handlers with a maximum load arm of at least 1250 kg. It is equipped with adequate number of hydraulic wedges (12 to 20 elements) for the cutting of the rock drilled linearly.

    The working cycle is performed by a single operator using procedure similar to that traditionally performed with punciotti manual, but with time running very low and lengths of cut maggiori.La flag portacunei machine is positioned near the line of drilling el ' operator can easily insert the wedges into the holes, which are put under pressure by remote control or remote control.

    Compared to the manual process, the spaccaroccia HP 120 allows the operator to do other than potentially very dangerous tool and cut the stones away from the safe. The machine can contribute, among other things, the reduction of 'explosive in quarrying.
  • VIP 916 Quarry Wire Saw Machine
    favorites
    Add To Compare

    Type: Quarry MachinesQuarry Wire Saw Machine

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Onyx, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    Built with high quality components, the vip 916 is robust and reliable diamond wire saw. It can perform cuts of very large surfaces in any type of stone: marble, limestone, granite and sandstone.

    The VIP 916 is equipped with the following options of main electric motor: 37 kW (50 hp), 45 kW (60hp), 55 kW (75 hp) and 75 kW (100 hp).

    The start can be either via a star/triangle system or via inverter. The inverter allows to vary and to adjust the diamond wire speed from 0 to 40 m/sec.

    The VIP 916, with only one positioning operation, allows to make two parallel cuts with spacing of 1.75 m or 2 m.

    The VIP 916 is equipped with a hydraulic unit controlling both the rotation and the lateral movement of the head.

    The head rotation is via robust center plate and a hydraulic motor.

    The lateral head movement is via two chrome plating supporting stems and one hydraulic cylinder.

    The VIP 916 travel movement on the rails is by means of a pinion / rack system. There are two available different options of travel system: the first, called “TC”, consists of a central hung rack fixed on the rails. The second one, called “TI”, features two side racks, carved on the track bars.

    Both systems can be supplied with automatic travel speed control either via D.C. motor and electronic card, or via asynchronous motor controlled by inverter.

    The VIP 916 power board is installed inside the machine.

    If provided, the inverter, equipped with a special ventilation system, is mounted inside the frame case, hence well protected against dust and moisture.

    The machine is equipped with a portable, compact and a waterproof control panel, for all the controls and adjustments during the cut.

    The double-inverter version, one for the main motor and one for the travel movement on the rails, is equipped with PLC.

    This version comes with a portable control panel either electromechanical or touch-screen.

    The version with touch-screen and related software allows to interface with the operator, with automatic storage and processing of all the data related to cuts, which are essential for an accurate management of the cutting operation. A remote panel without cable, controlling all the positioning and operational functions of the machine, can be supplied as an option.
  • Standard Crusher 250-80
    favorites
    Add To Compare

    Type: Quarry MachinesRock Crushers, Jaw Crushers

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Sandstone

    Machinery Function Features:

    The 250-80 series include Stone Crushers with Special Blades and related accessories, such us Separators, Tipper Containers, Conveyor Belts (and others) are designed to recycle raw materials and scraps from processing of stone, marble, granite, porphyry, quartz, ceramics, building demolitions, similar material and glass, in small and large size, reducing the fragmented output for every requirement.

    Crushing process: it takes places due to a compression with a direct eccentric mechanism between different special plates (fixed and mobile), actuated by a transmission with trapezoidal belts, which can assume different levels of adjustment.

    Benefits: reduce the space of the same waste with its reuse in gardening, mosaic, road fills, furnishings and so on.
    The 250-80 Model is the basic version of the Crusher, to which you can add the desired accessories, according on your personal processing needs
  • Quarry Chain Saw Machine Nf-7.1
    favorites
    Add To Compare

    Type: Quarry MachinesStone Chain Saw MachinesBank Chain Saw Machines

    Warranty: 12 Months

    Usage: Marble, Limestone, Sandstone, Travertine

    Machinery Function Features:

    The chain saw machine model ”NF-7.1” is designated for the extraction of marble and stone blocks in the open sky quarries using the most recent technologies. The chain saw “NF-7.1” permits to improve the performances and to reduce to minimum the cost of the cut.
    The chain saw “NF-7.1” is universal: it can execute vertical and horizontal cuts on materials with compression strength higher than 150 Mpa. The movement of the machine is made through a sprocket and rack element assembled on the rails.
    The chain
    The principal tool of work of the chain saw “NF-7.1” is a modular chain composed of insert-holders having, by means of mechanical fixing with a screw, inserts in tungsten carbide. The chain saw “NF-7.1” can work in manual and automatic thanks to the presence of a control device during the cutting phase.
    Operating condition
    Thanks further to the experience and to the tests carried out during the last 5 years, the chain saw “NF-7.1” can work in the following climatic conditions:
    From -40°C to +40°C (the oil tank is provided with heater for the hydraulic oil in places where the temperature goes below 0°C)
    Humidity relative to 98% at 25°C
  • Granite Quarry Wire Saw Machine
    favorites
    Add To Compare

    Type: Quarry MachinesQuarry Wire Saw Machine

    Warranty: 12 Months

    Usage: Granite, Basalt, Quartzite

    Machinery Function Features:

    Granite - Multiwire
    It is born from a decennial idea and it is by now prompt since several years waiting for the suitable machine.
    Finally today we can destine it to all the small, medium and big clients that dream:
    to produce slabs in very short time;
    to reduce the waste of the stone with consequent major quantity of product and minor quantity of waste;
    to manage and eliminate;
    to involve always lesser power for the machines' feeding;
    to have the possibility of varying the thickness of the slabs in a more simple and fast way
  • Pompa Hydro Bag
    favorites
    Add To Compare

    Type: Quarry MachinesQuarry Hydro-Bags, Rock SplitterQuarry Hydro-Bags

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    Hydrobag is a pump for filling cushion with water, for borrow material excavation.

    Hydro bag is composed by:

    - pressure power unit Hydro bag with electric engine 5,5 Hp

    - supported wheelbarrow and water reservoir

    - safety and distribution valves

    - aspiration and pressure pipes and aspiration filter

    - Series of fast couplings - thrust up to 1000 tonnes, dilatation 25-30cm

    - supply plug and engine - saver interrupter.

    Cushions are available: CM 50x50, CM 80x80, CM 50X100, CM 100x100, CM 150x150.
  • Fantini Tunnel Chain saw machine GU 70-R-XC Sawmill Machine
    favorites
    Add To Compare

    Type: Quarry MachinesStone Chain Saw MachinesTunnel Chain Saw Machines

    Warranty: 12 Months

    Usage: Marble, Limestone, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    Fantini Tunnel Chain saw machine GU 70-R-XC Sawmill Machine for Tunnels

    Installed power: 60 kW

    Weight: 30,000 Kg

    Electrical power supply: 400V/50 Hz

    Cutting depth: 3.0 m (XXL)

    Tunnel height: 5.15-5.62 m max

    GU70RXC

    Sawmill Machine for Tunnels

    Chain Saw Model GU70RXC is the most popular machine in the world for opening up and exploring a tunnel cave. Thanks to a lanyard positioned on the front frame, the track carrying the arm can rotate by 360 ° to allow vertical and horizontal cuts at the tunnel face.

    A single operator is sufficient to operate the machine (this model includes a radio remote control and a jack on the standard crawler undercarriage). This model can run cuts 3.2 metres deep into hard stone and marble.

    The machine can be configured according to the customer’s specific requirements.
  • Slim Bar Quarry Drilling Machine
    favorites
    Add To Compare

    Type: Quarry MachinesQuarry Drilling MachinePneumatic Drill Machine

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Onyx, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    Light duty drilling machine for one hammer, with automatic thrust adjustment and motorised travel on the rail. Fitted with a spherical joint, can be used for drilling at any angle.
  • Diamond Wire Machines
    favorites
    Add To Compare

    Type: Quarry MachinesQuarry Wire Saw Machine

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Quartzite, Travertine

    Machinery Function Features:

    Diamond Wire machines VIP 910
    ELECTRONIC DIAMOND WIRE SAW
    Machine properly studied and manufactured to cut big blocks, boulders and benches, when diamond wire speed adjustment is required. An inverter device is used to control and constantly adjust the diamond wire speed from 0 to 40 m/sec., according to the type of stone. The combination with the automatic feeding system by means of “supercard” or inverter, allows a very accurate management of the cutting tool and a very smooth and precise movement of the machine on the rails. It is possible to make two parallel cuts 170 or 200 cm wide and a complete rotation of 360° to cut on any angle, by means hydraulic device. The same device allows to make horizontal cuts at ground level without the use of any auxiliary accessories.

    Starter: Star delta diretto/Star Delta or direct
    Travel motor: Motore CC 1 HP vel. varianile1/Hp variable DC motor
    Wire tension: automatic controlled by a supercard
  • Quarry Chainsaw Machine Qst3000d on Cat432d Backhoe
    favorites
    Add To Compare

    Type: Quarry MachinesStone Chain Saw MachinesBackhoe Squaring Chain Saw

    Warranty: 12 Months

    Usage: Marble, Limestone, Sandstone

    Machinery Function Features:

    QST3000D chain saw machine on backhoe CAT432 is the last frontier for squaring blocks of marble and stones. QST3000D technology is driven by the very powerful motor of CAT432 and the hydraulic circuit for moving the chain saw was studied together with Caterpillar technicians and our technical staff.The advantages of this technology are a lot o : i.e. you can work day and night and in every weather conditions because the operator inside the cabin can decide the temperatures; you can work without using water ,etc...
    QST3000D works with CAT432 for positioning the blade using the control tools inside the cabin and you can modify the inclination using the stabilizers of backhoe; it's also possible to drive the chain saw trough a remote control outside the cabin.
    All movements for positioning the blade are on double chromate columns allows to have stability and stiffness; this system is unique and only Dazzini QST3000D use it; all movements are driven by single or double hydraulic cylinders (high reliability, simple and no maintenance costs).
    At the end of the cuts, with CAT432 is possible to remove the cuts' dust with only one operator with high safety and speed. CAT432 is 4x4 engine and it can move very easily between quarry's benches for reaching the blocks and starting to square, avoiding to use any other machines.
    QST3000D can use different chain, widiaholders and tools for giving the best cutting solutions for every kind of stones.
    Technical specification:
    • Base : CAT432D
    • Useful cut : 3.40 mt
    • Thickness : 38 mm
    • Chain speed : 0-1.5 mt/sec adjustable
    • Maximun high : 2.20 mt
    • Total lateral movements : 1.75 mt
    • Maximun cutting speed : 1 mt/min
    • Cutting tool : PCD or widia
    • Lubrifications by automatic pump with biodegradable grease
    • NO use of Electric supply
  • Crusher with Bags system 250-80S
    favorites
    Add To Compare

    Type: Quarry MachinesRock Crushers, Jaw Crushers

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Sandstone

    Machinery Function Features:

    The 250-80 series include Stone Crushers with Special Blades and related accessories, such us Separators, Tipper Containers, Conveyor Belts (and others) are designed to recycle raw materials and scraps from processing of stone, marble, granite, porphyry, quartz, ceramics, building demolitions, similar material and glass, in small and large size, reducing the fragmented output for every requirement.

    Crushing process: it takes places due to a compression with a direct eccentric mechanism between different special plates (fixed and mobile), actuated by a transmission with trapezoidal belts, which can assume different levels of adjustment.

    Benefits: reduce the space of the same waste with its reuse in gardening, mosaic, road fills, furnishings and so on.
    The 250-80S Model is composed of the Crusher and Bags collection system, allowing the accumulation of the crushed output in bags for easy transfer.
  • Perforante Mod. HK
    favorites
    Add To Compare

    Type: Quarry MachinesQuarry Drilling MachineHydraulic Drill Machine

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Sandstone, Travertine

  • SVC-70 Squaring Chain Saw Machine-Block Sawing Machine
    favorites
    Add To Compare

    Type: Quarry MachinesStone Chain Saw MachinesSquaring Chain Saw Machines

    Warranty: 12 Months

    Usage: Marble, Limestone, Sandstone, Travertine

    Machinery Function Features:

    The SV-C/70 mod. chain saw has been designed and built to execute vertical and frontal cuts on large banks or large blocks in ornamental stone quarries, and does not require water cooling.

    The machine is mounted on a fifth wheel track system enabling it to negotiate even the most difficult terrain, and the endothermic diesel motor guarantees autonomy and independence. It is capable of achieving cutting depths of up to 6.2 m (length) and 7.0 m (height).

    Installed power: 62.5 Kw

    Weight: 24,000 Kg

    Arm rotation : 360°

    Cutting depth: 4.0 m (XL)

    Speed: 1 Km/h on tracks
  • Slim Driller - Pneumatic drilling machine
    favorites
    Add To Compare

    Type: Quarry MachinesQuarry Drilling MachinePneumatic Drill Machine

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Basalt, Quartzite, Sandstone

    Machinery Function Features:

    Pneumatic drilling machine with a down-the-hole hammer for vertical and horizontal holes, for insertion of diamond wire.
  • Chain Saw Machine Mod. ST 300 VH
    favorites
    Add To Compare

    Type: Quarry MachinesStone Chain Saw MachinesBank Chain Saw Machines

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Onyx, Sandstone

  • Diamond Belt Sawing Machines for Quarry
    favorites
    Add To Compare

    Type: Quarry MachinesStone Chain Saw MachinesBeam Chain Saw Machines

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Sandstone, Travertine

    Machinery Function Features:

    Electric diamond belt sawing machine, designed to make tunnel cuts, vertical and horizontal. The JET BELT 940 is composed of two columns with two telescopic extensions for the machine fixing, connected with an horizontal beam of 462 cm that bears the electric cutting unit. This is composed of the main motor and the cutting arm with the diamond belt installed. The column bases are motorized for an easy positioning of the whole structure. The cutting tool consists of a special plastic belt with sintered diamond segments. Only water is used during the cutting phase, both for lubrication and cooling, so that no dust is produced during the cutting phase. Another advantage of diamond belt cutting system respect to the traditional one, is that no grease or oil are used, so that the cut is very clean and free from pollution load.
  • Crusher with Container 250-80C
    favorites
    Add To Compare

    Type: Quarry MachinesRock Crushers, Jaw Crushers

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Sandstone

    Machinery Function Features:

    The 250-80 series include Stone Crushers with Special Blades and related accessories, such us Separators, Tipper Containers, Conveyor Belts (and others) are designed to recycle raw materials and scraps from processing of stone, marble, granite, porphyry, quartz, ceramics, building demolitions, similar material and glass, in small and large size, reducing the fragmented output for every requirement.

    Crushing process: it takes places due to a compression with a direct eccentric mechanism between different special plates (fixed and mobile), actuated by a transmission with trapezoidal belts, which can assume different levels of adjustment.

    Benefits: reduce the space of the same waste with its reuse in gardening, mosaic, road fills, furnishings and so on.
    The 250-80C Model is composed of the Crusher, a large structure with a lateral staircase and a tipping Container, allowing the accumulation of the crushed output in the container for easy transfer.
  • Hydraulic Driller on Track Pct 100 for Quarry
    favorites
    Add To Compare

    Type: Quarry MachinesQuarry Drilling MachineHydraulic Drill Machine

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Basalt, Quartzite, Sandstone

    Machinery Function Features:

    The PCT100 machine is suggested for hard materials like granite. It is provided with "Down the Hole Hammer" or Hydraulic hammer and a particular hydraulic device for rotation and advancing. This characteristic allows to obtain top performances not obtainable with traditional systems: exceptional drilling speed (8,6 Meters per hour on "Azul Bahia" granite), low air consumption, light weigh, small dimensions, deviation error free. It can drill in every position and it is free from maintenance. The machine is supplied with a self-moving system by trucks with diesel engine.Use: Guide holes for diamond wire with DTH hammer; drilling by ISD by hydraulic hammer. Possibility to use PCD tool diam.90mm
    Technical specification:
    Possibility of holes diameters from 60 mm. up to 100
    0 mm. in every position.
    Possibility to use ISD.
    Free from deviation error.
    No steps on the quarry
    Diesel engine or electric motor
  • Dumper Perlini 366c - Quarry Equipment
    favorites
    Add To Compare

    Type: Quarry MachinesQuarry Heavy EquipmentsWheel Forklift Loaders

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Onyx

  • Terna Fantini Squaring Chain Saw Machine-Block Sawing Machin
    favorites
    Add To Compare

    Type: Quarry MachinesStone Chain Saw MachinesSquaring Chain Saw Machines

    Warranty: 12 Months

    Usage: Marble, Limestone, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    Terna FANTINI

    Block Sawing Machine

    The Terni Fantini is a machine made from a rubber tired JCB vehicle and a group of Fantini cutters. The extreme versatility of its’ rubberised four-wheel drive allows you to reach cutting areas quickly, whether they are: blocks spread over the quarry, banks on the ground or even cuts executed directly at the front of the bank.

    As the machine travels to the block and not the other way round, the Fantini back allows you to save time and money. The operator works from a cabin, protected from atmospheric agents, without needing auxiliary staff, and the cuts are executed dry. The cutting capacity standard is 3.4 metres (length) and 3.0 metres (height).

    Techncial Specifications

    Installed power: 68.6 Kw

    Tractor weight: about 7,000 Kg

    Cutting unit weight: 2,000 Kg

    Arm rotation: 90°

    Useful for cuts of up to 3.9 metres

    Chain speed: 0-0.7 m/sec

    Thickness of cut: 27 mm – 38 mm

    Tractor transit speed: 40 km/h

    Technical characteristics may be subject to variations
  • Titano Oleodynamic Quarry Bench Pushing Unit
    favorites
    Add To Compare

    Type: Quarry MachinesQuarry Hydro-Bags, Rock SplitterQuarry Hydraulic Jacks

    Warranty: 12 Months

    Usage: Marble, Limestone, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    A pair of hydraulic cylinders for bench tipping. The unit composed of:Oleodynamic device equipped with a two stages pump for use 700 atm. That can be powered either by tree phase 3 HP electric motor 220/380 Volts with reversing (Tiatano/E Model) or by compustion engine 5 HP and automatic adjuster (Titano/SC model) or by pneumatic motor 3.5 HP(Titani/PN). The unit is composed of: two jacks manufactured in specially treated stell whit chromed cylinder and complete with quick couplings, safety valves and limit switch; each jack ton pushing capacity.

  • Crusher with Separator on high structure 250-80A-M3
    favorites
    Add To Compare

    Type: Quarry MachinesRock Crushers, Jaw Crushers

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Sandstone

    Machinery Function Features:

    The 250-80 series include Stone Crushers with Special Blades and related accessories, such us Separators, Tipper Containers, Conveyor Belts (and others) are designed to recycle raw materials and scraps from processing of stone, marble, granite, porphyry, quartz, ceramics, building demolitions, similar material and glass, in small and large size, reducing the fragmented output for every requirement.

    Crushing process: it takes places due to a compression with a direct eccentric mechanism between different special plates (fixed and mobile), actuated by a transmission with trapezoidal belts, which can assume different levels of adjustment.

    Benefits: reduce the space of the same waste with its reuse in gardening, mosaic, road fills, furnishings and so on.
    The 250-80A-M3 Model is full version of crushing plant, composed of the Crusher and 3 output Separation System, simultaneously at the crushing occurs a sectioned division of the crushed output into three customizable parts, with potential to add tipping containers and conveyor belts

Have a Question? Ask our expert

Clear All
Compare (0/4)
StoneContact
Tips×

Tell Suppliers what you want to buy