Post Your Needs

Quarry Machines in Poland

( 10 ) Have Prices

The adventure of stone begins in quarry. It is excavated in high mountains, on hills with no roads, clean and pure veins are sought and they are tried to be extracted in blocks with large construction machines. It is really troublesome because it is a heavy material and you often have to struggle with nature as well. Heavy machinery is needed, from road construction to block removal, to large trucks loaded into factories or containers. You can see all of these quarry machines with their technical details on Stonecontact.com and get in touch with their manufacturers directly. What we want from Quarry owners is that they do not harm nature, and that they leave it in a way suitable for nature after mining is finished.

More Hide
Categories: Show More
Country:
  • Rock Crushers, Jaw Crushers KSZ-200x300
    favorites
    Add To Compare

    Type: Quarry MachinesRock Crushers, Jaw Crushers

    €7000-7500

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    AZTECH is a leading POLISH manufacturer of industrial machinery on both Polish and foreign markets. Our company is selling new and used machines and also spare parts for machines.
    Our jaw crushers are designed for preliminary crushing of hard, medium-hard and soft materials into medium and coarse fraction. The material is crushed by the pressure between two jaws approaching each other, one of which is permanently attached and the other is moving.
    The jaws and side linings are made of hard-wearing manganese steel. Its maximum input, depending on the model, can reach up to 1000 mm, which makes it possible to obtain a finished product with a granulation of 10 mm to 200 mm at the machine exit. An important feature of jaw crushers is their high efficiency. Depending on the model, it can reach up to 300 t / h. The crusher is used to crush raw materials with a low moisture ratio, such as: stone, concrete, brick, granite, sandstone, lime, basalt, hard coal, charcoal and many others.
    We are selling constantly other types of new, never used jaw crushers of various powers and capacities.
    ODEL: KSZ-200x300
    INLET:200x300
    READY PRODUCT (mm) -10-50mm
    CAPACITY (t / h) -5
    ENGINE (kW) -11
    WEIGHT (kg) -1100
    The jaws and side linings are made of high-quality, hard-wearing MANGANESE STEEL.
    AVAILABLE MODELS
    inlet capacity power fraction
    200x300 up to 10 t / h 11 Kw 10 - 50mm
    250x400 up to 25 t / h 18.5 Kw 20 - 60mm
    300x500 up to 35 t / h 22 kW 20 - 70mm
    400x600 up to 50 t / h 30 Kw 30 - 130mm
    600x900 up to 100 t / h 75 kW 35-200 mm
    ATTENTION:
    1. The given capacities refer to loose material with a density of 1000 kg / m3.
    2. Our products are constantly updated and improved, AZTECH reserves the right to change the parameters and design without prior notice to the user;
    3. The above product configuration is not necessarily a standard configuration. Please consult us carefully when purchasing.
    The prices given are NET prices. Transport price is calculated individually for each ready machine.
    We invite you to try our offer and if in Poland, to visit our point of sales in Opole region – YOU HAVE THE POSSIBILITY TO TEST OUR MACHINE WITH YOUR MATERIAL.
  • Scrap mills Hammer Rock Crusher
    favorites
    Add To Compare

    Type: Quarry MachinesRock Crushers, Jaw Crushers

    Warranty: 12 Months

    Usage: Granite, Limestone, Basalt, Quartzite, Sandstone

    Machinery Function Features:

    Scrap mills - NEW
    SCRAP MILLS from the highly-effective series are machines designed for crushing and processing various types of scrap and recycled waste. In our offer you will find machines with horizontal or vertical operation, in various sizes (power, amount of charge, production capacity, fraction of the finished product).
    Purpose of machines:
    stators
    rotor
    alternators
    electric motors
    aluminum motor housings
    municipal cans
    Hammer crushers with horizontal operation have the ability to adjust the obtained fraction of goods by using a transverse grate or sieve at the material outlet. Thanks to this, you have full control over the obtained fraction of the finished material.
    In all types of hammer crushers, the internal walls and hammers are made of high-quality and wear-resistant manganese steel, which makes the use of the machines effective, long-lasting and economical.
    AVAILABLE MODELS
    model max load capacity power fraction (adjustable)
    KM-PO / E-600x800 up to 750mm up to 25 t / h 55 Kw 0.5mm up to 70mm
    KM-PO / E-800x1000 up to 950mm up to 38 t / h 75 Kw 0.5mm up to 80mm
    KM-PO / E-1000x1000 up to 1150mm up to 50 t / h 132 Kw 0.5mm up to 100mm
  • TWO-SHAFT MILL SHREDDER MW-600x400
    favorites
    Add To Compare

    Type: Quarry MachinesRock Crushers, Jaw Crushers

    €19500-20000

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    AZTECH is a leading POLISH manufacturer of industrial machinery on both Polish and foreign markets. Our company is selling new and used machines and also spare parts for machines.
    TWO-SHAFT MILL SHREDDER is a low-speed device, equipped with cutting knives and scraper counter-knives. The device has been adapted to grinding various types of materials: wood (walls, pallets), plastics (foil, jute bags, plastic barrels), paper (waste paper, cardboard), thimbles, steel / aluminum barrels, tires, chipboard, household appliances, furniture waste , cartridge case, sheet metal, aluminum profiles, cables, electric garbage, municipal waste, aluminum shavings and many more.
    The sales offer applies to a new machine - TWO-SHAFT MILL SHREDDER model: MS-600x400

    MANUFACTURER'S WARRANTY!! BEST PRICE / QUALITY ON THE MARKET !!

    Technical data :

    Cutting chamber dimensions - 600x400mm
    Thickness of the knives - from 10 to 30 mm (possibility to configure)
    Number of moving knives - from 20 to 60 (depending on thickness)
    Knives rotation speed - 15-22 rpm
    Engine - 2x 15 kW
    Weight: 2600 kg


    Models available:

    Cutting chamber dimensions - 1000x600mm
    The thickness of the knives - from 10 to 30 mm (possibility to configure)
    Number of movable knives - from 100 to 33 (depending on thickness)
    Knives rotation speed - 15
    Engine - 2x 30 kW
    Weight: 4600 kg

    The machine has a direct drive, on each shaft separately through huge WD400 gearboxes and electric motors. It has speed regulation and reverse.
    The device includes a machine, a solid platform and a complete control cabinet.

    We have in stock other types of new, never used double shaft mills and hammer crushers of various powers and capacities.

    The universal mill is excellent for recycling !!!

    THE GIVEN PRICES ARE NET PRICES !!

    We invite you to try our offer and if in Poland, to visit our point of sales in Opole region – YOU HAVE THE POSSIBILITY TO TEST OUR MACHINE WITH YOUR MATERIAL.
  • Hammer Crusher
    favorites
    Add To Compare

    Type: Quarry MachinesRock Crushers, Jaw Crushers

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Basalt, Quartzite

    Machinery Function Features:

    A hammer crusher from the high-performance series is a machine designed for medium and fine-grained crushing of materials of various hardness (for stone, e.g. sandstone - basalt), including recycled waste (for aluminum, electronic equipment). In our offer you will find machines with horizontal or vertical operation, in various sizes (power, amount of charge, production capacity, fraction of the finished product).
    In principle, the impact is the most important for the operation of the hammer crusher. Inside the crushing chamber there is a rotor to which hammers are attached. Falling fragments are hit by them, which changes the direction of their fall. This is to maximize the force with which they collide with the plates on the swinging beams. Then it goes to further, mutual collisions, thanks to which an even greater fragmentation is achieved.
    Purpose of machines:
    Due to its properties, the hammer crusher is often used in mining and aggregate mines, especially for stone. It is also often used where recycling is important for entrepreneurs - during demolition works or in scrap yards. The most frequently processed materials include:
    basalt
    sandstone
    charcoal
    coal
    stone
    concrete
    brick
    calcium
    aluminum
    electronic equipment
    Hammer crushers with horizontal action have the ability to regulate the obtained fraction of goods by using a transverse grate at the material outlet. Thanks to this, you have full control over the obtained fraction of the finished material. Machines designed for crushing materials with a moisture content of up to 15%!
    Vertical action hammer crushers are characterized by crushing the material to fractions below 1 mm. The characteristics of the machine and the lack of the use of a grate / sieve allow for crushing materials with increased humidity, with the possibility of wet crushing (feeding a stream of water along with the material to be crushed).
    In all types of hammer crushers, the internal walls and hammers are made of high-quality and wear-resistant manganese steel, which makes the use of the machines effective, long-lasting and economical.
    AVAILABLE MODELS
    HORIZONTAL PERFORMANCE HAMMER CRUSHERS
    model max load capacity power fraction (adjustable)
    KM-PO / E-300x400 to 350mm up to 6 t / h 11Kw 0.5mm to 30mm
    KM-PO / E-400x600 up to 550mm up to 15 t / h 18.5 - 30 Kw 0.5mm up to 50mm
    KM-PO / E-600x800 up to 750mm up to 25 t / h 55 Kw 0.5mm up to 70mm
    KM-PO / E-800x1000 up to 950mm up to 38 t / h 75 Kw 0.5mm up to 80mm
    KM-PO / E-1000x1200 up to 1150mm up to 50 t / h 110 - 132 Kw 0.5mm up to 100mm
    Caution:
    1. The given capacities refer to the material with a density of 1000 kg / m3.
    2. Our products are constantly updated and improved, AZ TECH Sp. z .o. reserves the right to change parameters and design without prior notice to the user;
    3. The above product configuration is not necessarily a standard configuration. Please consult us carefully when purchasing.
    HAMMER CRUSHERS WITH VERTICAL ACTION
    model max load capacity power fraction
    KM-PI-800 up to 300mm up to 15 t / h 22 Kw under 1mm
    KM-PI-1000 up to 200mm up to 25 t / h 37 Kw under 0.8mm
    KM-PI-1250 up to 700mm up to 40 t / h 55 - 75 Kw under 0.6mm
    KM-PI-1500 up to 550mm up to 60 t / h 75 - 110 Kw under 0.5mm
    Caution:
    1. The given capacities refer to the material with a density of 1000 kg / m3.
    2. Our products are constantly updated and improved, AZ TECH Sp. z .o. reserves the right to change parameters and design without prior notice to the user;
    3. The above product configuration is not necessarily a standard configuration. Please consult us carefully when purchasing.
  • Hammer Crusher KM-PO/E-400x300
    favorites
    Add To Compare

    Type: Quarry MachinesRock Crushers, Jaw Crushers

    €6000-6500

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    AZTECH is a leading POLISH manufacturer of industrial machinery on both Polish and foreign markets. Our company is selling new and used machines and also spare parts for machines.
    The horizontal hammer crusher from our high-efficiency series is a device designed for second or third level crushing, depending on the used sieves. It is designed for medium and fine-grain crushing. Its maximum input can reach up to 800mm, which makes it possible to obtain a ready product with a granulation from 0.5 mm to 100 mm at the machine exit, set according to your own needs, thanks to the use of a moving grate (in the form of a thick sieve) at the machine exit. The crusher is used to crush hard, medium-hard and soft materials with a low moisture ratio, such as:
    - aggregate (granite, basalt, lime, stone)
    - construction waste (concrete, brick, stone)
    - loose / brittle materials (asphalt, ceramics, coal, glass)
    and materials of other origin:
    - plastics
    - scrap (rotors, stators, alternators)
    - aluminum (can, caps)
    - household appliances (power supplies, computers, kettles, irons)
    - electronics (fuses, contactors, resistors)

    We have in stock other types of hammer crushers with different powers and capacities.

    AVAILABLE MODELS

    HORIZONTAL PERFORMANCE HAMMER CRUSHERS

    model inlet efficiency power fraction regulated with a sieve or grate
    KM-PO / E-300x400 200x300mm up to 6 t / h 11Kw 0.5-50mm
    KM-PO / E-400x600 300x400mm up to 15 t / h 18.5 Kw 0.5 -50mm
    KM-PO / E-600x800 400x500mm up to 30 t / h 55 Kw 0.5-70mm
    KM-PO / E-800x1000 500x700mm up to 50 t / h 75 Kw 0.5-80mm
    KM-PO / E-1000x1200 500x1050mm up to 90 t / h 110 Kw 0.5-100mm
    ATTENTION:
    1. The given capacities refer to loose material with a density of 1000 kg / m3.
    2. Our products are constantly updated and improved, AZTECH reserves the right to change the parameters and design without prior notice to the user;
    3. The above product configuration is not necessarily a standard configuration. Please consult us carefully when purchasing.
    The prices given are NET prices.
    We invite you to try our offer and if in Poland, to visit our point of sales in Opole region – YOU HAVE THE POSSIBILITY TO TEST OUR MACHINE WITH YOUR MATERIAL.
  • Hammer crusher KM-PI-800
    favorites
    Add To Compare

    Type: Quarry MachinesRock Crushers, Jaw Crushers

    €9500-10000

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    AZTECH is a leading POLISH manufacturer of industrial machinery on both Polish and foreign markets. Our company is selling new and used machines and also spare parts for machines.
    The vertical hammer crusher uses a new type of fine-grained crushing (maximum input 400mm, which gives the possibility of obtaining a ready product with a granulation from 0.01mm to 5mm at the machine exit).
    A important advantage is the possibility of crushing raw material with increased HUMIDITY ratio.
    The vertical crushing combination has many other advantages such as: high reduction ratio, low wear factor, stable work process of the machine. The crusher is designed to crush medium-hard and soft raw materials, such as:

    - limestone
    - sandstone
    - gypsum
    - slag
    - charcoal
    - hard coal
    - stone
    - concrete
    - glass
    - cap
    - anthracite
    MODEL- KM-PI-800
    INLET (mm) - 150x250mm
    CAPACITY (t / h) - 15
    ENGINE (kW) - 22
    We have in stock other types of new, never used hammer crushers of various powers and capacities.
    model: KM-PI-1000 / inlet 200x300mm (2 pcs) / 37 kw engine / capacity up to 20 t / fraction of finished goods 0-15mm (adjustable with the number of hammers)
    model: KM-PI-1250 / inlet 300x400mm (2 pcs) / engine 75 kW / capacity up to 35 t / fraction of finished goods 0-20mm (adjustable with the number of hammers)
    model: KM-PI-1500 / inlet 400x500mm (2 pcs) / engine 130 kW / capacity up to 50 t / fraction of finished goods 0-25mm (adjustable with the number of hammers)
    model: KM-PI / 1700 / inlet 500x600mm (2 pcs) / engine 160 kW / capacity up to 100 t / fraction of finished goods 0-30mm (adjustable with the number of hammers)
    The hammers are made of high-quality, hard-wearing MANGANESE STEEL
    ATTENTION:
    1. The given capacities refer to loose material with a density of 1000 kg / m3.
    2. Our products are constantly updated and improved, AZTECH reserves the right to change the parameters and design without prior notice to the user;
    3. The above product configuration is not necessarily a standard configuration. Please consult us carefully when purchasing.
    The prices given are NET prices.
    We invite you to try our offer and if in Poland, to visit our point of sales in Opole region – YOU HAVE THE POSSIBILITY TO TEST OUR MACHINE WITH YOUR MATERIAL.
  • Glass crushing production plant
    favorites
    Add To Compare

    Type: Quarry MachinesRock Crushers, Jaw Crushers

    €41000-41500

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    AZTECH is a leading POLISH manufacturer of industrial machinery on both Polish and foreign markets. Our company is selling new and used machines and also spare parts for machines.
    The offer applies to a complete production line for crushing glued glass
    The line consists of :
    1) TWO-SHAFT MILL SHREDDER MW-600x400
    2) CONVEYOR BELTS 2 pcs - PT6
    3) VERTICAL HAMMER CRUSHER KM-PI-800
    4) CONTROL CABINET

    THIS OFFERED LINE ISSUES A READY PRODUCT SIZE 0-5mm !

    Whole window glasses can be milled, inside foil is separated during this process.

    The standard setting of the crusher (number of hammers- 21 pcs) gives the ready product in the fraction given above.

    It is possible to change the fraction of the ready product by changing the number of hammers and their settings.

    Below you can see the working line:
    https://www.youtube.com/watch?v=khawmOStW00
    https://www.youtube.com/watch?v=mH6WO8u9IcI
    1. The given capacities refer to loose material with a density of 1000 kg / m3.
    2. Our products are constantly updated and improved, AZTECH reserves the right to change the parameters and design without prior notice to the user;
    3. The above product configuration is not necessarily a standard configuration. Please consult us carefully when purchasing.
    The prices given are NET prices.
    We invite you to try our offer and if in Poland, to visit our point of sales in Opole region – YOU HAVE THE POSSIBILITY TO TEST OUR MACHINE WITH YOUR MATERIAL.
  • Crushing plant for hard and medium-hard material
    favorites
    Add To Compare

    Type: Quarry MachinesRock Crushers, Jaw Crushers

    €23000-23500

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    AZTECH is a leading POLISH manufacturer of industrial machinery on both Polish and foreign markets. Our company is selling new and used machines and also spare parts for machines.
    The offer applies to a complete crushing line for hard and medium-hard material, which includes:
    VIBRATING TABLE - length 3000mm
    JAW CRUSHER - model KSZ-250x400
    BELT CONVEYOR - PT6
    CONTROL CABINET
    Line capacity: about 15 t / h
    Obtained aggregate: 20-70mm
    It is possible to change the configuration of the combined devices.
    1. The given capacities refer to loose material with a density of 1000 kg / m3.
    2. Our products are constantly updated and improved, AZTECH reserves the right to change the parameters and design without prior notice to the user;
    3. The above product configuration is not necessarily a standard configuration. Please consult us carefully when purchasing.
    The prices given are NET prices.
    We invite you to try our offer and if in Poland, to visit our point of sales in Opole region – YOU HAVE THE POSSIBILITY TO TEST OUR MACHINE WITH YOUR MATERIAL.
  • Crushing plant 30-40 t/h - Rock Crushers, Jaw Crushers
    favorites
    Add To Compare

    Type: Quarry MachinesRock Crushers, Jaw Crushers

    €40000-40500

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    AZTECH is a leading POLISH manufacturer of industrial machinery on both Polish and foreign markets. Our company is selling new and used machines and also spare parts for machines.
    The offer applies to a complete crushing line for 30-40 t/h capacity
    The products are mainly LIMESTONE, MINE STONE, COAL, BASALT ETC. The offer includes:
    1) CHARGING HOPPER - KZ-750
    2) BELT CONVEYORS 2 pcs - PT6
    3) KM-PI-1250 HAMMER CRUSHER
    4) CONTROL CABINET
    THE OFFERED LINE PRODUCES THE READY AGGREGATE:
    1-2mm / 60%
    2-6mm / 39%
    6-30mm / 1%
    From a raw material with a fraction of 20 to 150 mm!

    The standard setting of the crusher (number of hammers- 21 pcs) gives the ready product in the fraction given above.

    It is possible to change the fraction of the ready product by changing the number of hammers and their settings.
    Below you can see the working line:
    https://www.youtube.com/watch?v=khawmOStW00
    https://www.youtube.com/watch?v=mH6WO8u9IcI
    1. The given capacities refer to loose material with a density of 1000 kg / m3.
    2. Our products are constantly updated and improved, AZTECH reserves the right to change the parameters and design without prior notice to the user;
    3. The above product configuration is not necessarily a standard configuration. Please consult us carefully when purchasing.
    The prices given are NET prices.
    We invite you to try our offer and if in Poland, to visit our point of sales in Opole region – YOU HAVE THE POSSIBILITY TO TEST OUR MACHINE WITH YOUR MATERIAL.
  • Scrap crushing / grinding plant
    favorites
    Add To Compare

    Type: Quarry MachinesRock Crushers, Jaw Crushers

    €64000-64500

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    AZTECH is a leading POLISH manufacturer of industrial machinery on both Polish and foreign markets. Our company is selling new and used machines and also spare parts for machines.
    The offer applies to a complete crushing/grinding line for ALUMINUM, CAST IRON and includes :
    1. Belt conveyors: charging, receiving, sorting
    2. Vibratory screener
    3. Magnetic separator
    4. Hammer mill
    5. Control cabinet for the entire system of devices
    The line capacity is about 5 t / h, depending on the size and hardness of the material. The power of the entire line is approximately 70 kW.
    1. The given capacities refer to loose material with a density of 1000 kg / m3.
    2. Our products are constantly updated and improved, AZTECH reserves the right to change the parameters and design without prior notice to the user;
    3. The above product configuration is not necessarily a standard configuration. Please consult us carefully when purchasing.
    The prices given are NET prices.
    We invite you to try our offer and if in Poland, to visit our point of sales in Opole region – YOU HAVE THE POSSIBILITY TO TEST OUR MACHINE WITH YOUR MATERIAL.
  • 1

Have a Question? Ask our expert

Clear All
Compare (0/4)
StoneContact
Tips×

Tell Suppliers what you want to buy