Slab Polishing Line Machine in Spain

Automatic strip polisher used to polish rough material, granite and marble surfaces.
There is a first zone which incorporates the gauging headstocks. The second one is provided with the polishing headstocks which have a swing movement in order to guarantee a good finish result.
This machine enjoys an accurate design. On the frontal part there is a strip with transparent components as well as the headstocks and strip controls so that the work which is being done can be comfortably controlled and seen.
Different models depending on the amount of headstocks and the material minimum width to be worked with. Its features can be modified according to every moments’ needs.

HPCS-Polisher
Automatic strip polisher used to polish rough material, granite and marble surfaces.
There is a first zone which incorporates the gauging headstocks. The second one is provided with the polishing headstocks which have a swing movement in order to guarantee a good finish result.
This machine enjoys an accurate design. On the frontal part there is a strip with transparent components as well as the headstocks and strip controls so that the work which is being done can be comfortably controlled and seen.
Different models depending on the amount of headstocks and the material minimum width to be worked with. Its features can be modified according to every moments’needs.

TECHNICAL DATA:
- Dimension of the machine .............................. 7,000 x 2,000 x 2,000 mm
- Each motor power polisher ....................................................... 2 CV
- Motor power tilting system ................................................. 7 HP
- Total installed power .............................................. ............... 39 CV
- Motor power moldudador .............................................. 4 CV ..........
- Conveyor reducer ............................................. .. 2 CV
(electronic adjustable)
- Thickness to polish .................................................................................... 6 cm
- 1 Set drip-gauge ............................... tilt 0 ° to 90 °
- 6 engines polishers with automatic stop control programmatically.
- 2 + Bevelers Bevelers lower than
- 2 Blocks entered and output rollers
- The first engine works as moldurador, with mechanical working radius.
MACHINE
The machine is built in monoblock structure
By Crank Rocker System With Sealed bearings in oil bath
Programmable Automatic lubrication deposit. -
Securing pneumatic pistons mediantes stones with rubber rollers Accompaniment
Extensible support for Long pieces. -
System input and output rollers included. -
Table operation via large touch screen.
Shells of stainless steel machine

It consists of the following elements:
- One roller blocks entry of 1.000 mm.
- One set goteron 4 hp.
- Six Polishers with drive motors and automatic stop programmatically de 2hp x 6 = 12h
- One top chamfering + One lower chamfering with drive and automatic stop programmatically.
- One roller block output 1.000 mm.
- All sealed oil bath heads.
- Heads in sealed boxes liquid fat.
- One conveyor belt with variator and regulation me chanical speed 2hp.
- Vulcanized conveyor belt drive pulley to ensure greater adherence.

- One stainless roller assembly with automatic pneumatic accompanying regulation up and down, depending on the thickness of the stone work. (For working different thicknesses continuously).
- One telescopic stand with wheels for long piece accompaniment.
- Thickness polish 6 cm.
- Dimensions of the machine: 6500 long x 1900 width x 1655 mm high ( with entry and exit rollers included ).
- Total installed power: 26hp

REFERENCE 103 006 016
THICKNESS MAX A POLISH 100 mm
MACHINE PULICANTOS
DIAMETER PADS 130 mm
MARK / MODEL SSX MD.TE
PROGRAMMING DIGITAL
YEAR OF MANUFACTURING 2006
GREASE MANUAL
HEADS HYDRAULICS
OVERALL DIMENSIONS 7000 X 2300 mm
NUMBER OF POLISH 6
POWER 40 CV
CHAMFERING 1 TOP + 1 BOTTOM
SWING SISTEM BY RODS MAKES STRAIGHT EDGE AND ROUND