Welding Machine Sicing Machine

Welding Machine Sicing Machine
  • Picture1
  • Picture2
  • Picture3
  • Picture4
  • Picture5
  • Picture6
  • Product Detail

  • Supplier Profile



Supply Ability:20 machines per month

Port:Xiamen Port, China

Min. Order: 1 (Pieces)

Packaging Detail: fully protectd for sea shipment

Delivery Detail: 30% down payment + 70% before shipment

Shipment Terms: FOB

Payment Terms: T/T,L/C,D/A,D/P,Western Union,Money Gram,PayPal,Other


Introduction to portable induction heating equipment

This machine is the latest high-tech product which adopts the most advanced electronic power device and the unique converter control technology with reasonable structure design, thus opening up a new field of medium and high frequency induction heating equipment. This kind of portable high-frequency heating machine by the conventional high frequency induction heating equipment with high pressure and vacuum tube oscillation as the main body of the technical structure, and in silicon controlled rectifier and a set of complex control technology as the main body of the intermediate frequency induction technology structure, thus overcome the conventional induction heating equipment in the transport, installation, use and maintenance of all kinds of problems in the process of, and superior performance can be fully reflected, provide users with the greatest convenience.


Main technical parameters



GP-20 (15) A

最大输入功率Maximum input power

9 (7.5) KVA


Input voltage


Single phase220V 50-60Hz


Cooling waterpressure



Input voltage range



22 (19) KG左右


Inputoscillation frequency





Heating current

200-1000 (800) A


Loadcontinuation rate

>80% (30℃室温)

(30Room temperature)



Cooling water connection:

Connect the inlet pipe to the inlet pipe end of the equipment, connect the outlet pipe to the outlet pipe end of the equipment to ensure good connection to prevent water leakage. The inlet pipe can be connected to the tap or the user's own circulating water system. Certain pressure and flow to prevent equipment damage caused by insufficient water pressure. The recommended water pressure is 0.1-0 3Mpa, the water flow is 5-10L/MIN, and the temperature switch inside the equipment can effectively protect the water temperature. When the cooling water temperature exceeds 55°C, it will automatically stop working and beep; The device application ring is soldered, and when heated without cooling water, it will cause the tin to melt and also play the role of no water protection.

There are several suggestions for the installation and use of cooling water:

1.The cooling water source should ensure a stable water supply. It is better to use a water pump for circulation. The pump should be equipped with a filter.

2.Cooling water should be clean and non-corrosive.

3.The temperature of the cooling water should not be too high. It should be lower than 50.For long-term continuous operation, the water temperature should not exceed 40.

4.Please don't change the tin-solder to aluminum-solder or copper-solder.

5.Check whether the cooling water is unobstructed before heating.

Power connection:

Use 6M or more soft copper wire to connect the input power according to the figure. The power requirement of the power supply is single phase 200V, 10KVA, allowing the network voltage to fluctuate by 10%, that is, the voltage range is 180-245V. If this exceeds this garden, equipment damage may occur. Please pay attention to the user.

Installation induction coil

The induction coil passes both water and large induction heating current, which directly affects whether the machine can be used normally. Please carefully install it. Remember not to use waterproof material belt when installing, so as to avoid poor electrical connection.

Installation diagram


(Note: 1. Do not use the three-way connection of the water, it should be naturally exiled, the return pool (barrel) should not be higher than the equipment water, so as to avoid the back pressure is too high and the water pipe bursts inside the machine; 2. The cooling water should be free of impurities. Conditional users can use the soft water cooling device to cool the equipment.


  • Quality control and certificates

quality is the life of a facotry, we dedicate on quality all the time, we run machine test first before ship out. 

DAFON provide warranty for spare parts and electronic devises.


  • stone fairs around the world

we attend Xiamen stone fair every year with more than 100 ㎡ in outdoor area.

we also take part in Italy Verona stone fair, India Bangalore/Jaipur stone fair, Russia Moscow stone fair...


  • other stone processing machine of our factory

catalog of DAFON.jpg

  • F&Q


Q: When can my order get ready for shipment ?

A: Normally 20-30 days after receiving down payment, but it can be negotiated if customers need urgently.


Q: How about the quality guarantee period ?

A: one year


Q: How can you guarantee the production quality ?

A: We have strictly quality control system in our production process. All products must be double checked during every manufacturing process. Requirement of customers and quality of products will be full guaranteed.


Q: After I buy the machine, how I can install and operate it ?

A: We strongly suggest customer to ask our engineer to come to help you to install the machines, teach your operator how to operate and maintain the machines.


Q: If machine got problem, what can you support it ?

A: It depends on the problem, usually the process is like this

1. phone or email the customers how to settle at first. 

2. send the good one by Express  immediately if spare parts broken. 

3. if problems still not be settled, we will appoint our engineer to solve the problem on spot.

  • contact information


Quanzhou DAFON Machinery Co., Ltd.


Business Type: Machinery and Tools,Contractor,Factory,Exporter,Machinery and Tools,Contractor,Factory,Exporter,Machinery and Tools,Contractor,Factory,Exporter

Establishment Date:Jan 05,2015

No. of Total Employees:51 ~ 200

Main Products:Kerbs Stone Cutting Machine, Multi Blade Block Cutter, Slab Flaming Machine, Stone Splitting Machine, Line Polishing Machine, Quarry Mining Machine

Contact Person:Danny Pan



Addr:Binjiang Industrial Zone, Nan'an City, Fujian Province, China

Website:Supplier Website

company licence Utility model patent

We are a professional stone machine factory that integrates design, manufacture, and trading as one. We mainly produce a multiblade stone cutting machine(especially for curbstone/kerbstone/cobblestone etc), infrared edge cutting machine, automatic line polishing machine, full automatic edge cutting machine line, multiblade stone block cutter, quarry mining machine and all sorts of stone cutting and processing machines. We also bring in new technology on manufacturing environment-friendly equipment, such as a waste water recycling system, stone dust vacuum cleaner, etc.
Based on industrial cluster advantage, we offer one-stop stone cutting product solutions for free to our customers including guidance for mine planning, technical consultant, technical output, equipment and tools purchase, guidance for factory construction, etc.


Post Your Request

The request includes:
1) surface finished, size
2) quantity required
3) inquire about FOB price
Home - Help Center - Terms of Use - Our Partners - Link to Us - Member Center - Contact us - Site Map - Hot Products

  Stone Name: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z
Customer Support:    Skype Me™!Skype: stonecontact.com QQQQ: 294049449 WhatsApp:0086-15710609183
© 2003-2020 StoneContact.com