Epoxy for Marble Slab Surface Repairing

Epoxy for Marble Slab Surface Repairing
  • Picture1
  • Picture2
  • Product Detail

  • Supplier Profile

Supply Ability:1000tons/week

Port:Xiamen/Shanghai/Guangzhou

Min. Order: 2 (Tons)

Packaging Detail: 200L Drum

Shipment Terms: FOB,CFR,CIF,Others

Payment Terms: T/T,L/C

Description:

Epoxy for marble slab surface repairing

1181

A:B=4:1


[Performance Characteristics]

The product is in low viscosity and high penetration. It has strong adhesion and strength after cured.It is abrasion, water, oil, chemical and aging resistant. The glue layer is colorless and transparent and anti yellowing.

[Product advantages]

1.High adhesion and strength, high penetration to small cracks,

2.Low odor, do no harms to workers;

3.Good age and yellowing resistance;

4.This product meet the standard of GB18583, ROHS, it is environmental friendly

【Technical data】

No.

Items

Technical data

1

Appearance

Part A

colorless and transparent liquid

Part B

colorless and transparent liquid

2

Viscosity (mPa·s)

Part A

600-1000

Part B

30-60

3

Mix ratio(A∶B)

4 :1

4

Pot life(25℃min)

10-15

5

Initial curing time(25℃h)

2-3

6

Shear Strength(RT48hMPa)

≥7.0


【Curing Time】

Temperature(℃)

Pot life (min)

Initial curing time(h)

5-10

20-30

6-8

10-20

15-20

4-6

20-30

10-15

3-4

30-40

5-10

2-3

PS: The time above is based on the mixed glue 600g


[Instructions]

1. Slabs treatment

Slabs should be totally dry.

Remove the mud, oil or other purity on the slab surface.

2. Prepare the glue and mix

Mix the glue by A:B=4:1(by weight) completely

Please use up the glue within the pot life. The glue will be fever and is prohibited to use when beyond the pot life. The more of the glue mixed, and the higher of the temperature, the shorter the pot life. If mixed too much glue, please divide quickly to use. 

Do not mix the cap of A and B. Please seal the caps anytime in case the moisture and dash from the air.

The plated with big open mouth container is recommend for glue mixing to extend the pot life of glue

3. Spreading the glue

Spread the glue evenly on the surface of slab with scrape back and forth. The recommend using weight is 80-150g/㎡。

For the cracks on slabs, spread glue back and forth to make the glue penetrate completely.

For the big defects on the slab, such as the soil, please remove first, then mix the glue and stone powder to fix it. Polish after cured, then spread the glue.

Please do not use the non epoxy and other slab surface treatment agent, or it will be not suitable for the epoxy glue spreading.

4. Glue solidify

The glue will be initially cured in 2-3 house under room temperature(25℃)It can be proceed to next procedure after 24 hours;

If possible, heat up the stone with adhesive to 50-60 ℃ and polish it after 2-3 hours.

Before the adhesive cured, the stone should be placed horizontally and not stacked; after cured, the lubricants such as talcum powder can be applied on the stone surface, to avoid stone adhesion when they are stacked.

5. Clean up

Use the specialized cleaner to clean the apparatus before the glue cured.


HUNAN MAGPOW ADHESIVE GROUP CO., LTD

China-Hunan-Changsha

Business Type: Machinery and Tools,Exporter,Other,Factory

Establishment Date:Nov 16,1990

No. of Total Employees:51 ~ 200

Main Products:Epoxy AB Glue For Natural Stone Proceesing, Epoxy For Slabs Repairing, Epoxy For Block Wrapping, Epoxy For Stone Composite, Epoxy For Stone Bonding, Other Adhesives

Contact Person:Mary XU

Phone:86-83285111

Fax:86-83285126

Mobile:86-13973142659

Addr:HUNAN MAGPOW ADHESIVE GROUP CO., LTD

Website:Supplier Website

HUNAN MAGPOW ADHESIVE GROUP CO., LTD, establised in 1989, we are the biggest Epoxy Ab GLUE manufacture and supplier in China. We have been the stone epoxy industry for 30 years. Its our grest honor to be the VIP supplier of UMGG, JINSHENG etc. 

Currently we have branch office and warehouse in the main stone center in China, such as Shuitou and Yunfun; our product also export to India, Turkey, Egypt, Oman, Indonesia, Vietnam, Ukraine, Russian, USA...

We have our own provincial R&D center with advanced equipment and professional engineers. We are the drafter of China National Standard of Stone adhesives GB-24264 2009.


Warmly welcome to visit us.

Description

Post Your Request

*From:
The request includes:
1) surface finished, size
2) quantity required
3) inquire about FOB price
*Request:

Other Adhesives & Maintenance from this supplier

You may also be interested in :

Epoxy Adhesive Stone Glue
Home - Help Center - Terms of Use - Our Partners - Link to Us - Member Center - Contact us - Site Map - Hot Products

  Stone Name: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z
Customer Support:    Skype Me™!Skype: stonecontact.com QQQQ: 294049449
© 2003-2019 StoneContact.com