Block Repairing Epoxy

Block Repairing Epoxy
  • Picture1
  • Picture2
  • Picture3
  • Product Detail

  • Supplier Profile

Port:ChangSha / customized

Min. Order: 2 (Tons)

Shipment Terms: FOB,CFR,CIF

Payment Terms: T/T


Block Repairing Epoxy by Perfusion

Item No. : 1128

Mix ratio by weight : A:B=3:1

Application : Used in quarry and factories to fill and cure the blocks that are not suitable for sawing or transportation, and to repair their surface and internal defects.

Welcome to email us for more details.

It could be applied to the quarry and factories for filling and curing the blocks that are not suitable for sawing or transportation, and to repair the stones' surface and internal defects.

The product is  two-component modified epoxy resin adhesive, which has the characteristics of low viscosity, strong permeability, slow curing speed, low shrinkage, strong adhesion after curing, good medium resistance and excellent aging resistance.  It could be perfused and wrapped by one time with the professional perfustion equipment, where can  avoid the blocks be wasted and destroyed.

1. low viscosity, strong permeability, can permeate tiny micro cracks, with strong repairing ability;
2. Non-volatile, slight odor, low irritation, and convenient  operatings and processing;
3. High bonding strength, strong adhesion, excellent aging resistance, good toughness of the resin layer and good yellowing resistance;
4. The product conforms to GB18583, GB30982 standard, EU ROHS, eco-friendly.

Usage Manual:
1. requirements of block
A. The blocks to be poured shall be free of impurities such as dust, dirt, sand and oil;
B. If there are large defects on the surface of the blockage, if there is soil layer or sandstone, it should be removed first. The oil can be scraped off or ground with a solvent such as alcohol or acetone, then rinsed with a high-pressure water gun, placed under the sun or dried. The place where the surface of the block is dry is basically anhydrous and ready for use.

2. Mixing adhesive
a. Mix adhesive at rate of A:B= 3:1 (by weight) evenly.
b. Mixing rate must be correct, must mix evenly, avoid mix the glue taking tools and put the mixed adhesive back to packing barrels.
c. Mix the glues when use, and the glue must be use up within operation time. Must stop use the glue which be heating up when the time is exceed the stipulate operation time. Between 25-30℃, mixed 600g glue should use up within 5 minutes ; more glue mixing , higher temperature, and shorter operation time , in contrast the operation time is longer . Should separate glue rapidly when excessive .
d. Don’t mix the caps of the package of A and B components, even operating need keep close caps immediately to avoid dust and moisture from atmosphere .

3. Perfusion
A.The ideal temperature for perfusion is 15-35℃;
B.The mixed glue is poured into the block with a dedicated block filling device.

A.Initial curing at room temperature (25℃)for 10-12 hours, after 48 hours, it can be put into the next process;
B.The construction temperature should not be lower than 5℃. When the ambient temperature is lower than 10℃, the curing speed of the glue will be significantly slowed down. It is recommended to use heating to promote the curing.

Use special cleanser to clean the operation tools before solidifying entirely.

HuNan Magpow Adhesive Group Co. Ltd.

China-Hunan-Liu Yang

Business Type: 8,Chemicals

Establishment Date:Apr 29,1989

No. of Total Employees:N/A

Main Products:Epoxy Marble Stone Glues, Construction Glue, Dry Hanging Glue, Epoxy Block Wrapping, Epoxy Resin For Bonding, Compound, Wooden Glue

Contact Person:Rosemary Xu

Phone:+86-0731 83285000


Addr:LanSi Road, LiuYang Biomedical Industrial Park, Liu Yang City, 410331, HuNan Province, China

Website:Supplier Website

ISO 9001: 2000

We are one of the leader professional manufacturers in China for producing various adhesives since year of 1989, with long time practise and application on crack curing, repairing, back-netting, block wrapping etc. on the marble stones, granite stones etc., we got very good reputation in our domestic market.

Our products are mainly: block reinforcement glue, block perfusion adhesive, slab surface curing adhesive, back-netting glue, dry-hanging glue, rapid bonding stone glue, composite glue. High quality and reasonable price level will make you a satisfactory on our products.

Welcome inquiries from all over the world, and we are standby here for you.  


Post Your Request

The request includes:
1) surface finished, size
2) quantity required
3) inquire about FOB price

Other Adhesives & Maintenance from this supplier

Home - Help Center - Terms of Use - Our Partners - Link to Us - Member Center - Contact us - Site Map - Hot Products

  Stone Name: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z
Customer Support:    Skype Me™!Skype: QQQQ: 294049449 WhatsApp/Wechat:+86-17689946988
© 2003-2021