CBC 75 H.P. Quarry Diamond Wire Saw Machine

· The machine is built with electro-welded steel and cast iron that guarantee the stability, rigidity and strength required to face any condition of working and ensure a long life of the equipment.
· The head of support and rotation of the main motor is built of cast iron.
· The main motor, electric and direct to the main wheel, is an 8 poles motor in the case of the 50 and 75 HP machines and 6 poles motor in the 100 HP ones; with them, the maximum torque of the motor is achieved in the normal speeds of working of the diamond wire, increasing the productivity of the machine and optimizing the life of the tool.
· The main motor is controlled by an inverter, allowing a smooth and high torque start up and to increase progressively and to tune the speed of the wire to the optimum conditions.
· The main wheel, Ø810 mm in the 50 and 75 HP machines and Ø941 mm in the 100 HP one, guarantees a good transmission of the power to the wire without causing damages to the wire.
· The regulation of the tension of the wire is electronic and automatic in order to achieve the optimum productivity and the maximum performance in each part of the cut.
· The machine has a control panel and a remote control for the operator to position himself in a safe area during the cut.
· The guiding wheels can be disassembled for an easy replacement of the rubber liners.
· The machine has installed a safety system that stops the machine in case of any problem during the cut like wire breaking, excessive tension in the wire or tracks end.
· The rails for the movement of the machine are 3 meters long and interchangeable to permit their endless setup to avoid the need of cutting the wire in shorter pieces when the cut advances, optimizing the life of the tool.