Edge Grinding Polishing Machine
FOB Price:$15000-25000
-Electric adjustment lifting
-The machine No. 1, No. 2 forming motor 5.5 kW, No. 3, 4 polishing motor 4 kW, No. 5 motor 3 kW (No. 1-5 motor horizontal laying), No. 6 motor 3 kW (vertical placement), the motor can be moved to process the anti-slip grooves of the stairs on the smooth surface of the board, it can also be installed with a water polishing disc and moved to the bottom of the stone to process the flat edge and remove the silk), No. 7 and No. 8 fine polishing motors 3 kW, (No. 7-8 motors are horizontal placement). The motor frame is independently developed with a single guide column structure. The position of the grinding wheel can be locked after adjustment. It can be equipped with a 18cm diameter grinding wheel. The in and out guide rails can rise and fall synchronously. According to the different size and thickness of the stone, various flat stones are ground, large and small round edges, French edges, R round belt side polishing, stairs non-slip belt polishing belt linearity is completed at one time, slotting and polishing and other special-shaped edges. The rough grinding, fine grinding, and polishing processes are completed at one time. The brightness after processing is higher than that of the bright cutting of the board surface. The back cut and the bottom belt are polished at one time. The structure is advanced and reasonable. The front and back of the motor can be adjusted electrically to avoid manual wheel change slow speed, many links and complex operators, workers are unwilling to change wheels, slow wheel changes appear. High precision, fast efficiency, easy operation, simple maintenance. During the grinding process, the feed speed and progress can be adjusted electrically by pressing the lift switch. The maximum amount of processing is 5m/min. The normal use of the machine is equivalent to the workload of 15 persons in the normal stone processing, and the process defects caused by the workers during processing are eliminated.
Parameters |
Unit |
DFY-LM11641 |
Overall machine length |
4 |
6800 |
Overall machine width |
4 |
1350 |
Machine weight |
26 |
3000 |
Installed electrical power |
7 |
40 |
Overall machine height |
4 |
2000 |
PLC
Features:
-8 heads Independent research and development of single guide column structure for motor frame
-Electric adjustment lifting
-The machine No. 1, No. 2 forming motor 5.5 kW, No. 3, 4 polishing motor 4 kW, No. 5 motor 3 kW (No. 1-5 motor horizontal laying), No. 6 motor 3 kW (vertical placement), the motor can be moved to process the anti-slip grooves of the stairs on the smooth surface of the board, it can also be installed with a water polishing disc and moved to the bottom of the stone to process the flat edge and remove the silk), No. 7 and No. 8 fine polishing motors 3 kW, (No. 7-8 motors are horizontal placement). The motor frame is independently developed with a single guide column structure. The position of the grinding wheel can be locked after adjustment. It can be equipped with a 18cm diameter grinding wheel. The in and out guide rails can rise and fall synchronously. According to the different size and thickness of the stone, various flat stones are ground, large and small round edges, French edges, R round belt side polishing, stairs non-slip belt polishing belt linearity is completed at one time, slotting and polishing and other special-shaped edges. The rough grinding, fine grinding, and polishing processes are completed at one time. The brightness after processing is higher than that of the bright cutting of the board surface. The back cut and the bottom belt are polished at one time. The structure is advanced and reasonable. The front and back of the motor can be adjusted electrically to avoid manual wheel change slow speed, many links and complex operators, workers are unwilling to change wheels, slow wheel changes appear. High precision, fast efficiency, easy operation, simple maintenance. During the grinding process, the feed speed and progress can be adjusted electrically by pressing the lift switch. The maximum amount of processing is 5m/min. The normal use of the machine is equivalent to the workload of 15 persons in the normal stone processing, and the process defects caused by the workers during processing are eliminated.
Nic***Wrote:
Hello, would it be possible to have more details on the Green Line automatic cutting, edge profiling machine and if possible have its price? cordially
Related Products: