Pneumatic Polisher in Japan

50 years have passed since our world’s first air polisher WS-5 has been developed. Water Sander WS-6 and WS-6S had been
developed using the latest Japanese technology.
The Greatest Feature:
1．Equipped with latest motor:
This latest motor makes possible to increase the rotation speed and torque up to 15 % even though the air consumption is reduced.
2．The industry first Shaft Lock system:
Using this new feature, it makes very easy to change the polishing pads.
3．Made in Japan from designing to processing
All designs, manufacturing and assembly of parts of our WS-6 and WS-6S are done by Japanese craftsmen.
CAUTION:
・ WS-6 and WS-6S are the air tools specially designed for pads size up to 100 mm. Also, they can’t be used for cutting and grinding.
・ Please use the air polisher with the specified air pressure（0.4～0.6Mpa 80PSI） and air consumption（16CFM 460L/min）.
The air consumption larger than its specification will damage the polisher. Especially a user who used the older model polisher should be careful about the air consumption.
・ Using an air filter and regulator unit is highly recommended in order to prevent the WS-6 breakage.

Type Pneumatic Polisher
Application Wet
RPM 3,400 min-1 (without loading)
Weight 1.2 kg
Power 0.2kW
Compressor 3.75kW
Air pressure 0.5 – 0.6 Mpa
Thread M14

ORBITAL SANDER 62W WET TYPE
This is an industry first Wet type orbital sander. It is the best sander for dust control when polishing Acrylic artificial marble. It sucks up water from such as a bucket, so it can be used anywhere without water supply. It uses parts for wet type, so it is
designed to be resistant to rust. It is also adapted by TOYOTA, and highly appreciated since the life is two or three times longer than the conventional one.
DOUBLE ACTION SANDER 55W WET TYPE
This is an industry first Wet type double action sander.The latest design reduces vibration, and makes the sander lighter and smaller, but still keeps the same torque.
It sucks up water from such as a bucket, so it can be used in any environment without water supply. It uses parts for wet type, so it is designed to be resistant to rust. It is also adapted by TOYOTA, and highly appreciated since the life is two or three times longer than the conventional one.

Type Pneumatic Polisher
Application Wet
RPM 5000 min-1 (without loading)
Weight 1.2 kg
Power 0.2kW
Compressor 3.75kW
Air pressure 0.5 – 0.6 Mpa
Thread M14, M16
Spare parts Available

It is a special polisher designed to polish the areas where the hand polishing is difficult to reach.It makes possible to get fine gloss. Please use a piece of the old flexible diamond pad instead of the specific diamond pad.