Travertine Pneumatic Polisher

50 years have passed since our world’s first air polisher WS-5 has been developed. Water Sander WS-6 and WS-6S had been
developed using the latest Japanese technology.
The Greatest Feature:
1．Equipped with latest motor:
This latest motor makes possible to increase the rotation speed and torque up to 15 % even though the air consumption is reduced.
2．The industry first Shaft Lock system:
Using this new feature, it makes very easy to change the polishing pads.
3．Made in Japan from designing to processing
All designs, manufacturing and assembly of parts of our WS-6 and WS-6S are done by Japanese craftsmen.
CAUTION:
・ WS-6 and WS-6S are the air tools specially designed for pads size up to 100 mm. Also, they can’t be used for cutting and grinding.
・ Please use the air polisher with the specified air pressure（0.4～0.6Mpa 80PSI） and air consumption（16CFM 460L/min）.
The air consumption larger than its specification will damage the polisher. Especially a user who used the older model polisher should be careful about the air consumption.
・ Using an air filter and regulator unit is highly recommended in order to prevent the WS-6 breakage.

Type Pneumatic Polisher
Application Wet
RPM 3,400 min-1 (without loading)
Weight 1.2 kg
Power 0.2kW
Compressor 3.75kW
Air pressure 0.5 – 0.6 Mpa
Thread M14

Air Polisher Rear Exhaust Air Polished tool Polished machine
1. Excellent performance with lower vibration and noise
2. Gravity casting housing carries a long duration3. Centre water feed function smooth finishing and reduces dust and improves environment protection
4. Water valve can be adjusted for variable water flow
5. Include a reversible side handle for easy operation
6. Lightweight(3lbs) and compactable design are suitable for single-hand operation.
7. rubber sleeve to hold the polisher well8. 4" connection pad with velcro hook to connect the polishing pads.

Type Pneumatic Polisher
Application Wet
RPM 5000 min-1 (without loading)
Weight 1.2 kg
Power 0.2kW
Compressor 3.75kW
Air pressure 0.5 – 0.6 Mpa
Thread M14, M16
Spare parts Available

5-inch handheld air wet stone grinder/cutter
1. The wet air grinder was designed to accommodate 4" or 5" diamond cup wheels or diamond blades.
2. It is built rugged for daily continuous fabrication production in the most severe working conditions. Water-tight sealed bearings provide extended life and smooth handling.
3. It comes with a 25ft water hose,5ft air hose, 3 air/water hose protectors, a cup wheel removal wrench, and a handle.