Home ProductsStone MachineryStone Factory MachinesStone Surface Processing Machines Slab Polishing Line Machine
LMS 650 2A-14A Automatic Calibration and Polishing Lines for Marble Strips and Tiles
FOB Price:
Type:
Stone Factory MachinesStone Surface Processing Machines Slab Polishing Line Machine
Usage:
Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine
After-Sale
Warranty:12 Months
Install and Guarantee:Customer pay for installation, Remote guidance installation, Third-party team installation
Maintenance:Remote troubleshooting, Field troubleshooting
Machinery Function Features
AUTOMATIC CALIBRATION AND POLISHING LINES FOR MARBLE STRIPS AND TILES
Excellence that is unrivaled.
LTotal and accessible quality has always been the top of the list of the GMM “mission”. The same commitment applied to the development of the more advanced version of the LMS series, automatic marble strips polishing machines. Following the construction philosophy that has always characterized the excellent Cemar product, the new series of polishing machines was developed using sturdy, precise and reliable mechanics. At the same time, cutting edge technological and electronic solutions were developed to ensure maximum quality of the processed material, high production yield and reduced processing waste. Result: high level performance, low running and maintenance costs with lasting durability. All at an affordable cost for the Customer.
UA customized solution for any requirement.
A customized solution for any requirement. To provide a solution for the specific needs of our Customers, the machines in the LMS series are produced in various sizes (650-850-1000) and different combinations of calibrators and polishing units. All LMS machines can work individually or positioned in production lines, even complex. This last application is easy to implement, thanks to the accompanying Software, developed entirely by GMM.
FEATURES
BASE
Monolithic high-thickness steel base electro-welded with rectified sliding surface.
INTERCHANGEABLE WEAR-PROOF SURFACES
Made with special steel (UBNW.1.446), thickness 3 mm, to guarantee planarity over time and facilitate maintenance.
SURFACE TREATMENT
All parts are treated inside our Company, with hand sand-blasting, cold galvanising and coating with bi-component epoxy base. On request, base and shoulders can be treated with Cataphoresis or hot dip galvanising. All screws are stainless steel.
3-BELT CONVEYOR
Driven by two large-diameter drums and inverter adjustable speed. Unique system to clean and lubricate the belt to ensure uniform sliding. The drive drum is coated with vulcanised rubber to prevent slipping and ensure flow smoothly.
SPINDLE HOLDER BEAM
Sliding on the shoulders fitted with roller cage in oil bath, protected by sealed stainless steel telescopic guards. Hardened steel sliding elements interchangeable and installed on the shoulders and bridge. The spindles are housed in the centre of the beam to ensure complete stability and eliminate any possibility of vibration.
BRIDGE TRANSLATION
With pinion and rack. Central gearmotor and antirotation bar with large diameter. Shifting speed controlled from inverter).
CALIBRATION UNITS
- Calibrator spindle made with heavy steel metalwork with rectified chromeplated sleeve, that slides through cast iron bushing to absorb vibrations during processing. On the spindle plate where it serves as a flywheel and is dynamically balanced, there are calibrator rings with diamond sectors installed on them (Ø 670-870-1050 mm). Electric drive can be 22 or 30 kW.
- An automatic system combined with motor absorption acts on conveyor speed, slowing it in case of excessive overload, making the spindle stop and automatically lift. The spindle is automatically repositioned with absolute precision when the operating cycle starts back up again. The calibrator is managed from the touch screen for all of its automatic and manual functions. Automatic positioning at the pre-selected height with centesimal precision.
POLISHING UNITS
- Cast iron polishing spindles, installed in the centre of the beam, with thick and rectified chrome-plated steel shaft, sliding on bronze bushing, complete with pneumatic cylinder for lifting abrasive carrier plate.
Each spindle is fitted with a pressure gauge to control pressure and counter-pressure to balance the head during the work.
- Motors. 7.5 or 11 kW motors with single or sequential start-up. Drive transmission through high-output pulleys and belts.
- Ø 470/510 aluminium alloy polishing plates complete with Frankfurt fittings for seven abrasives. They are equipped with a multidirectional shock absorbing system to ensure maximum operating homogeneity and efficiency of the abrasive.
- Automatic centralised lubrication system of the spindles with the possibility of setting quantities and intervention.
- Abrasive finished. The machine is equipped with a system to set the thickness of the piece being processed based on which, a sensor installed on each head, calls the attention of the operator to replace the abrasive, when finished.
- Slab-guide supports with screw movement through flywheel from a unique station, complete with stainless steel slab-guide.
- Material presence detection unit to control the automatic up/down movement of heads in case of discontinuity between pieces.
SAFETY AND PROTECTIONS
- Front PLT doors with interlocking limit switch to avoid opening before the spindles stop. Side and rear stainless steel guards, easy to inspect.
ELECTRONICS: THE "THINKING HEART" OF LMS
- Reliable. After careful testing, the parts are chosen from the leading companies in the specific sectors. To minimise the probability of failure or interference, a modern “can open” network system is installed on board, which drastically reduces the number of cables between sections.
- Software developed entirely by GMM, guaranteed over time, improvable and most of all customizable according to customer requirements.
- 12" Touch Screen. Interactive graphics for complete machine cycle management with start-up in sequence of spindles, conveyor motor and bridge motor. To manage spindle down/up based on piece presence.
To view the abrasive consumption status for each head.
- Data base. Broad possibility to store large amounts of informations about work done or in process.
Excellence that is unrivaled.
LTotal and accessible quality has always been the top of the list of the GMM “mission”. The same commitment applied to the development of the more advanced version of the LMS series, automatic marble strips polishing machines. Following the construction philosophy that has always characterized the excellent Cemar product, the new series of polishing machines was developed using sturdy, precise and reliable mechanics. At the same time, cutting edge technological and electronic solutions were developed to ensure maximum quality of the processed material, high production yield and reduced processing waste. Result: high level performance, low running and maintenance costs with lasting durability. All at an affordable cost for the Customer.
UA customized solution for any requirement.
A customized solution for any requirement. To provide a solution for the specific needs of our Customers, the machines in the LMS series are produced in various sizes (650-850-1000) and different combinations of calibrators and polishing units. All LMS machines can work individually or positioned in production lines, even complex. This last application is easy to implement, thanks to the accompanying Software, developed entirely by GMM.
FEATURES
BASE
Monolithic high-thickness steel base electro-welded with rectified sliding surface.
INTERCHANGEABLE WEAR-PROOF SURFACES
Made with special steel (UBNW.1.446), thickness 3 mm, to guarantee planarity over time and facilitate maintenance.
SURFACE TREATMENT
All parts are treated inside our Company, with hand sand-blasting, cold galvanising and coating with bi-component epoxy base. On request, base and shoulders can be treated with Cataphoresis or hot dip galvanising. All screws are stainless steel.
3-BELT CONVEYOR
Driven by two large-diameter drums and inverter adjustable speed. Unique system to clean and lubricate the belt to ensure uniform sliding. The drive drum is coated with vulcanised rubber to prevent slipping and ensure flow smoothly.
SPINDLE HOLDER BEAM
Sliding on the shoulders fitted with roller cage in oil bath, protected by sealed stainless steel telescopic guards. Hardened steel sliding elements interchangeable and installed on the shoulders and bridge. The spindles are housed in the centre of the beam to ensure complete stability and eliminate any possibility of vibration.
BRIDGE TRANSLATION
With pinion and rack. Central gearmotor and antirotation bar with large diameter. Shifting speed controlled from inverter).
CALIBRATION UNITS
- Calibrator spindle made with heavy steel metalwork with rectified chromeplated sleeve, that slides through cast iron bushing to absorb vibrations during processing. On the spindle plate where it serves as a flywheel and is dynamically balanced, there are calibrator rings with diamond sectors installed on them (Ø 670-870-1050 mm). Electric drive can be 22 or 30 kW.
- An automatic system combined with motor absorption acts on conveyor speed, slowing it in case of excessive overload, making the spindle stop and automatically lift. The spindle is automatically repositioned with absolute precision when the operating cycle starts back up again. The calibrator is managed from the touch screen for all of its automatic and manual functions. Automatic positioning at the pre-selected height with centesimal precision.
POLISHING UNITS
- Cast iron polishing spindles, installed in the centre of the beam, with thick and rectified chrome-plated steel shaft, sliding on bronze bushing, complete with pneumatic cylinder for lifting abrasive carrier plate.
Each spindle is fitted with a pressure gauge to control pressure and counter-pressure to balance the head during the work.
- Motors. 7.5 or 11 kW motors with single or sequential start-up. Drive transmission through high-output pulleys and belts.
- Ø 470/510 aluminium alloy polishing plates complete with Frankfurt fittings for seven abrasives. They are equipped with a multidirectional shock absorbing system to ensure maximum operating homogeneity and efficiency of the abrasive.
- Automatic centralised lubrication system of the spindles with the possibility of setting quantities and intervention.
- Abrasive finished. The machine is equipped with a system to set the thickness of the piece being processed based on which, a sensor installed on each head, calls the attention of the operator to replace the abrasive, when finished.
- Slab-guide supports with screw movement through flywheel from a unique station, complete with stainless steel slab-guide.
- Material presence detection unit to control the automatic up/down movement of heads in case of discontinuity between pieces.
SAFETY AND PROTECTIONS
- Front PLT doors with interlocking limit switch to avoid opening before the spindles stop. Side and rear stainless steel guards, easy to inspect.
ELECTRONICS: THE "THINKING HEART" OF LMS
- Reliable. After careful testing, the parts are chosen from the leading companies in the specific sectors. To minimise the probability of failure or interference, a modern “can open” network system is installed on board, which drastically reduces the number of cables between sections.
- Software developed entirely by GMM, guaranteed over time, improvable and most of all customizable according to customer requirements.
- 12" Touch Screen. Interactive graphics for complete machine cycle management with start-up in sequence of spindles, conveyor motor and bridge motor. To manage spindle down/up based on piece presence.
To view the abrasive consumption status for each head.
- Data base. Broad possibility to store large amounts of informations about work done or in process.
Technical Data
Parameters |
Unit |
2A |
4A |
6A |
8A |
10A |
12A |
14A |
Calibrating plate diameter |
mm |
0 |
0 |
0 |
0 |
0 |
0 |
0 |
Number of Frankfurt Abrasive |
nr |
7 |
7 |
7 |
7 |
7 |
7 |
7 |
Calibrating spindle power |
kw |
0 |
0 |
0 |
0 |
0 |
0 |
0 |
Slabs Min. processable width |
mm |
300 |
300 |
300 |
300 |
300 |
300 |
300 |
Slabs max. processable width |
mm |
650 |
650 |
650 |
650 |
650 |
650 |
650 |
Polishing heads/honing units motor power |
kw |
7.5 |
7.5 |
7.5 |
7.5 |
7.5 |
7.5 |
7.5 |
Conveyor system forward speed |
mm/min |
0,7/7 (min/max) |
0,7/7 (min/max) |
0,7/7 (min/max) |
0,7/7 (min/max) |
0,7/7 (min/max) |
0,7/7 (min/max) |
0,7/7 (min/max) |
Machine overall height |
mm |
2400 |
2400 |
2400 |
2400 |
2400 |
2400 |
2400 |
Number of polishing heads/honing units |
nr |
2 |
4 |
6 |
8 |
10 |
12 |
14 |
Slabs max. processable thickness |
mm |
100 |
100 |
100 |
100 |
100 |
100 |
100 |
Number of Calibrators |
nr |
0 |
0 |
0 |
0 |
0 |
0 |
0 |
Approx. Weight |
Kg |
4300 |
5500 |
6700 |
7900 |
9100 |
10300 |
11500 |
Cooling water requirement |
L/min |
40 |
80 |
120 |
160 |
200 |
240 |
280 |
Beam crosswise movement speed |
mm/min |
5/18 (min/max) |
5/18 (min/max) |
5/18 (min/max) |
5/18 (min/max) |
5/18 (min/max) |
5/18 (min/max) |
5/18 (min/max) |
Slabs min. processable thickness |
mm |
10 |
10 |
10 |
10 |
10 |
10 |
10 |
Polishing plates diameter |
mm |
470 |
470 |
470 |
470 |
470 |
470 |
470 |
Machine overall length |
mm |
3680 |
4780 |
5880 |
6980 |
8080 |
9180 |
10280 |
Machine overall width |
mm |
2100 |
2100 |
2100 |
2100 |
2100 |
2100 |
2100 |
Bridge travel power |
kw |
1.5 |
1.5 |
1.5 |
2.2 |
2.2 |
3 |
3 |
Total installed electrical power |
kw |
19 |
34 |
49 |
64 |
80 |
96 |
112 |
Belt advancement motor power |
kw |
2.2 |
2.2 |
2.2 |
2.2 |
3 |
3 |
4 |
Recommended Slab Polishing Line Machine Products
Related Products:
Machinery
Factory Machines
Stone Surface Processing Machines
Slab Polishing Line Machine
Granite Slab Polishing Line Machine
Marble Slab Polishing Line Machine
Limestone Slab Polishing Line Machine
Onyx Slab Polishing Line Machine
Basalt Slab Polishing Line Machine
Quartzite Slab Polishing Line Machine
Sandstone Slab Polishing Line Machine
Travertine Slab Polishing Line Machine
Gmm Machines