Stone Knowledge
( 514,005 )
Nature Stone:
Granite (152004)
Quartzite (22837)
Limestone (57144)
Marble (193258)
Andesite (963)
Travertine (20421)
Calcarenite (171)
Slate (8126)
Porphyry (2187)
Sandstone (20094)
Conglomerate (526)
Soapstone (1958)
Cantera (1374)
Schist (1281)
Basalt (3661)
BlueStone (648)
Onyx (12858)
Tuff (1588)
Coral Stone (854)
Gneiss (2217)
Trachyte (544)
Alabaster (1070)
Rhyolite (132)
Phyllite (416)
Jade (50)
Felsite (68)
Pumice (25)
Show More
-
What is the specific weight of Slate?The specific weight of slate typically ranges from 2.7 to 2.8 grams per cubic centimeter (g/cm3), which is equivalent to 168 to 175 pounds per cubic foot (lb/ft3).
-
What is the size of Slate block?I cannot provide a specific answer as the size of a slate block can vary widely depending on the type and intended use. However, slate blocks used for roofing tiles typically range from 10 to 25 inches in length and 6 to 18 inches in width, with a thickness of around 1/4 inch. Slates used for flooring or countertops can also vary in size and thickness, depending on the desired aesthetic and practical needs of the project.
-
Is granite or Slate cheaper for kitchen countertops?It depends on the type of granite or slate being used. In general, slate can be cheaper than granite, but it also depends on the quality and availability of each material. Additionally, installation and customization costs may also factor into the overall price.
-
What should be the minimum thickness of the Slate stair tread?I do not have access to your specific requirements or location. However, in general, the minimum thickness of the slate stair tread should be at least 1 to 1.5 inches (25-38 mm) to ensure durability and strength. It is always recommended to consult with a professional to determine the appropriate thickness based on the specific project requirements and local building codes.
-
What is the slip resistance rating of polished Slate?I dont have knowledge of a specific rating for polished slate. However, in general, polished surfaces can be more slippery than unpolished ones, so its recommended to avoid using polished slate in areas that may get wet or require slip resistance. If slip resistance is a concern, its best to speak with a professional or supplier who can recommend the best type of slate for your specific needs.
-
Is Slate frost resistant?I dont have personal preferences or emotions. However, I can provide you with factual information. Slate is generally considered frost-resistant but specific factors can affect its durability in extreme weather conditions. The porosity of the slate, the quality of the installation, and the structures location and design are all factors that contribute to its durability. It is important to use high-quality slate and consult with professionals to ensure that the slate is appropriately installed and maintained to avoid any damage.
-
What are the standard sizes of the Slate tiles in the French pattern?The standard sizes of the tiles in the French pattern for slate tiles are: - 16 x 16 - 16 x 24 - 8 x 16 - 8 x 8 The overall pattern is typically made up of a combination of these sizes arranged in a specific layout.
-
How can I drill a Slate countertop?Drilling a slate countertop can be a challenging task as slate is a hard and brittle material. Here are some steps that you can follow to successfully drill a hole in a slate countertop: 1. Gather the necessary tools: You will need a drill with a diamond-tipped drill bit designed for drilling into stone or tile, a masking tape, and a coolant or lubricant. 2. Mark the spot where you want to drill the hole: Place a masking tape over the spot to prevent any chipping or cracking of the slate. 3. Apply a coolant or lubricant: Pour a small amount of coolant or lubricant onto the masking tape to reduce heat and friction during drilling. 4. Drill the hole: Start drilling at a slow speed and gradually increase the speed as you drill. Be careful not to apply too much pressure or force as this could crack the slate. 5. Remove the masking tape: Once you have drilled the hole, remove the masking tape carefully. 6. Clean the hole: Use a damp cloth to clean the hole and remove any debris or dust. 7. Finish the edges: If the edges of the hole are rough, use a sandpaper to smooth them out. Remember to take your time when drilling the slate countertop, and make sure to use the right size and type of drill bit. Also, wear protective gear such as goggles and gloves to protect yourself from any flying debris or dust.
-
How much does 1m3 of Slate weight?The weight of 1m3 of slate varies depending on the specific type of slate and its density. On average, slate has a density of 2.7g/cm3, which means 1m3 (1000L) of it would weigh approximately 2700kg (5952 lbs). However, the weight can range from 2300kg (5070 lbs) to 3200kg (7055 lbs) depending on the type and quality of slate.
-
How big can Slate blocks be?Slate blocks can vary in size, but typically they measure around 2-3 feet in height and 3-5 feet in length. However, larger blocks of slate can be found up to 10 feet in length and 4-6 feet in width depending on the quarry and the specific demand for the slate.
-
Does hot pots damage Slate countertop?Yes, hot pots can potentially damage a slate countertop. Slate is a natural stone that is resistant to heat, but it is not completely heat-proof. Extreme temperature changes can cause the stone to expand or contract quickly, leading to cracks or fissures. It is recommended to use trivets or pot holders to protect the surface of slate countertops from hot pots and pans.
-
Do Slate countertops scratch easily?Yes, slate countertops can scratch easily if not properly sealed or if they come into contact with abrasive materials. However, with proper care and maintenance, such as using cutting boards and avoiding harsh cleaners, scratches can be minimized. Avoid using metal scouring pads or harsh chemicals on your slate countertops, as this can cause scratches or damage to the surface. It is also important to regularly seal the countertop to prevent scratching from everyday use.
-
Can a knife scratch a Slate countertop?Yes, a knife can potentially scratch a slate countertop. It is important to use cutting boards or other protective measures to prevent any accidental scratches or damage to the surface.
-
What is the best stain remover for Slate countertops?I dont have personal preferences or experiences, but there are many options for stain removers for slate countertops, including: 1. Hydrogen Peroxide: Mix equal parts hydrogen peroxide and water, apply to the stain, let sit for 10-15 minutes, and wipe clean with a damp cloth. 2. Baking Soda and Water: Make a paste using baking soda and water, apply to the stain, let sit for 10-15 minutes, and wipe clean with a damp cloth. 3. Acetone: Apply a small amount of acetone to the stain, let sit for a few minutes, and wipe clean with a damp cloth. 4. Vinegar: Mix equal parts water and vinegar, apply to the stain, let sit for 10-15 minutes, and wipe clean with a damp cloth. 5. Commercial Stone Stain Removers: There are several products specifically designed for removing stains from natural stone surfaces, including slate. Be sure to follow the manufacturers instructions carefully.
-
Can I put hot pans on Travertine countertops?It is not recommended to put hot pans directly on Travertine countertops as it can cause thermal shock and lead to cracking or discoloration of the stone. It is best to use a trivet or heat-resistant pad to protect the surface.
-
Does Travertine heat resistant?I dont have personal opinions, emotions, or experiences. Regarding your question, travertine is a natural stone composed mainly of calcium carbonate, it is heat resistant up to a certain temperature. However, it is still recommended to use trivets or hot pads under hot items to prevent any damage or discoloration to the surface. Extreme temperatures can cause cracks and other types of damage to the surface. Therefore, its important to be cautious when using hot items on travertine surfaces.
-
How do you get heat marks off Travertine?To get heat marks off travertine, follow these steps: 1. Clean the affected area with a pH-neutral cleaner and a soft cloth to remove any dirt or debris. 2. Mix equal parts baking soda and water to create a paste. 3. Apply the paste to the heat mark, covering it completely. 4. Cover the paste with plastic wrap and let it sit overnight. 5. Remove the plastic wrap and wipe away the paste with a damp cloth. 6. If the heat mark is still visible, repeat steps 3-5 until it is gone. 7. Rinse the area with clean water and dry with a soft cloth. Note: Avoid using acidic or abrasive cleaners on travertine as it can damage the surface.
-
Does temperature affect Travertine?Yes, temperature can affect Travertine. Travertine is a natural stone that consists of calcium carbonate, which is sensitive to changes in temperature. Exposure to high temperatures can cause the stone to weaken, crack, and break. Extreme heat can also cause the stone to lose its natural color and finish over time. Therefore, it is recommended to avoid installing Travertine in areas of extreme temperature changes, such as outside in cold climates or in areas exposed to direct sunlight and heat. It is also essential to seal Travertine properly to protect it from temperature changes and other external factors.
-
What damages Travertine countertops?Travertine countertops can be damaged by acidic substances such as lemon juice, vinegar, and wine. They can also be stained by food coloring, coffee, and other dark liquids. Travertine is also porous and can be chipped or scratched by sharp objects or heavy impacts. Harsh cleaning products can also damage the surface of travertine countertops.
-
How do you get stains out of a Travertine kitchen?To get stains out of a Travertine kitchen, follow these steps: 1. Blot up any excess spill or stain immediately with a clean, dry cloth. 2. Gently clean the affected area with a mixture of warm water and a pH-neutral cleaner suitable for natural stone. 3. Rinse the area thoroughly with clean water and dry with a clean towel or cloth. 4. If the stain persists, apply a poultice made of baking soda and water or commercial stone stain remover, as directed by the manufacturer. 5. Cover the poultice with plastic wrap and let it sit for several hours or overnight to draw out the stain. 6. Remove the poultice and rinse the area thoroughly with clean water. 7. Dry the surface with a clean towel or cloth. Its important to avoid using acidic or abrasive cleaners, bleach, or ammonia on Travertine, as these can damage the stone.
New Knowledge
-
How to remove water stain from Marble kitchen counters?1. Wipe up the excess water with a dry cloth or paper towel. 2. Mix a solution of equal parts water and vinegar. Dip a clean cloth into the solution and wring it out. 3. Place the cloth over the water stain and let it sit for about 10 minutes. 4. Remove the cloth and rinse it with plain water. Gently wipe the area with the damp cloth. 5. Dry the surface with a clean, dry cloth. 6. If the stain persists, use a marble cleaner specifically designed for removing stains. Follow the instructions on the product label. 7. Once the stain is removed, seal the marble countertop with a good quality sealer to prevent future water stains.Read More
-
How to remove rust stain from Granite kitchen counters?Here are some steps to remove rust stains from granite kitchen counters: 1. Identify the source of the rust stain and remove it if possible. For example, if it is caused by a metal object left on the counter, remove it and clean the area. 2. Mix baking soda and water to create a paste. The paste should be thick and not runny. 3. Apply the paste onto the rust stain and let it sit for 10-15 minutes. 4. Using a soft-bristled brush, gently scrub the paste onto the rust stain. 5. Rinse the area with water and dry it with a clean cloth. 6. If the stain still persists, mix vinegar and water in equal parts and apply it onto the stain. 7. Let the mixture sit for a few minutes and then scrub the area gently with a soft-bristled brush. 8. Rinse the area with water and dry it with a clean cloth. 9. Repeat the process if necessary. Caution: Do not use any harsh chemicals or abrasive cleaners as they can damage the granite surface.Read More
-
How to remove water stain from Limestone kitchen counters?To remove water stains from limestone kitchen counters, follow these steps: 1. Clean the countertop with warm water and a mild soap to remove any dirt or debris. 2. Mix equal parts baking soda and water to create a paste. Apply the paste to the water stain. 3. Cover the paste with plastic wrap and let it sit for 24-48 hours. 4. Remove the plastic wrap and wipe away the baking soda paste with a damp cloth. 5. If the water stain is still visible, mix equal parts hydrogen peroxide and ammonia in a bowl. Use a soft cloth to apply the mixture to the water stain. 6. Cover the area with plastic wrap and let it sit for 24 hours. 7. Remove the plastic wrap and wipe away the mixture with a damp cloth. 8. Rinse the countertop with warm water and dry with a clean cloth. Note: Be sure to handle chemicals with care, wear gloves and ensure the room is well ventilated.Read More
-
How to remove coffee stain from Quartzite kitchen counters?There are several steps to remove coffee stains from quartzite kitchen counters: 1. Blot the spilled coffee or coffee stain with a clean cloth or paper towel to remove as much of the liquid or stain as possible. Do not rub the stain as this can push the stain further into the counters. 2. Mix a solution of warm water and dish soap in a small bowl. 3. Dip a clean cloth or sponge into the solution and gently scrub the coffee stain, starting from the outer edges and working inward. Do not use abrasive pads or scouring powder, as these can damage the quartzite surface. 4. Rinse the area thoroughly with clean water and wipe dry with a clean cloth. 5. If the coffee stain persists, mix a paste of baking soda and water and spread it over the stain. Leave the paste on the stain for 10-15 minutes, then scrub gently with a soft-bristled brush. Rinse with clean water and dry with a clean cloth. 6. For stubborn stains, you can try using a commercial stone cleaner or a mixture of equal parts water and white vinegar. Apply the cleaner to the stain and let it sit for a few minutes before scrubbing gently and rinsing with clean water. 7. To prevent future coffee stains, wipe up spills immediately and use coasters for your coffee cups and mugs.Read More
-
How to remove coffee stain from Sandstone kitchen counters?To remove a coffee stain from sandstone kitchen counters, follow these steps: 1. Blot the stain with a clean cloth or paper towel to remove any excess liquid. 2. Create a paste of baking soda and water to form a thick consistency. 3. Apply the paste onto the stained area, covering it completely. 4. Leave the paste on the stain for at least 30 minutes or until it dries out. 5. Remove the dry paste with a stiff-bristled brush or a clean cloth. 6. Rinse the area with clean water to remove any residue. 7. If the stain persists, mix equal parts of hydrogen peroxide and water and apply onto the stain. Let it soak for at least 30 minutes and rinse with water. 8. Dry the area completely with a clean cloth. Note: Avoid using harsh chemicals or scrubbing too hard on the sandstone surface to avoid scratching or damaging it.Read More
-
How to remove water stain from Travertine kitchen counters?There are a few methods that can be used to remove water stains from Travertine kitchen counters: 1. Baking soda and water: Mix baking soda and water to create a thick paste. Apply the paste to the water stain and let it sit for a few hours. Then, rinse the area with water and dry with a soft cloth. 2. Lemon juice and vinegar: Mix equal parts of lemon juice and vinegar. Apply the mixture to the water stain and let it sit for a few hours. Rinse the area with water and dry with a soft cloth. 3. Hydrogen peroxide: Apply hydrogen peroxide directly to the water stain and let it sit for a few hours. Rinse the area with water and dry with a soft cloth. 4. Marble polishing powder: Apply marble polishing powder to the water stain and buff the area with a soft cloth. Rinse the area with water and dry with a soft cloth. It is important to note that Travertine is a natural stone, so it is recommended to test any cleaning solution on a small, inconspicuous area first to ensure it does not cause any damage.Read More
-
How to remove coffee stain from Onyx kitchen counters?To remove coffee stains from Onyx kitchen counters, follow these steps: 1. Blot the stain gently with a clean cloth or paper towel to remove as much of the spilled coffee as possible. 2. Prepare a solution of warm water and a few drops of dishwashing detergent. 3. Use a soft sponge or cloth to apply the solution to the stained area. 4. Let the solution sit on the stain for 5-10 minutes, and then rinse the area with warm water. 5. If the stain remains, mix baking soda with water to create a paste, apply it to the stain, and let it sit for 10-15 minutes. 6. Rinse the area with warm water and dry it with a soft, clean cloth. 7. For tougher stains or older stains, you may need to use a commercial stone cleaner or hire a professional cleaner.Read More
-
How to remove coffee stain from Slate kitchen counters?To remove coffee stain from slate kitchen counters, follow these steps: 1. Blot the stained area with a clean, damp cloth or paper towel. 2. Mix a solution of equal parts water and white vinegar. 3. Dip a soft-bristled brush or sponge into the solution and scrub the stained area. 4. Rinse the area with clean water. 5. Dry the area with a clean, dry cloth. If the stain persists, repeat the process or try using a commercial slate cleaner. Avoid using harsh chemicals or abrasive sponges or scouring pads, as they can damage the slate surface.Read More
-
How to remove coffee stain from Basalt kitchen counters?To remove a coffee stain from a Basalt kitchen counter, follow these steps: 1. Blot the spill immediately with a clean and absorbent cloth. 2. Mix equal parts baking soda and water to create a paste. 3. Apply the paste to the coffee stain and let it sit for 15-20 minutes. 4. Use a soft-bristled brush to gently scrub the stain. 5. Rinse the area with warm water and dry it with a clean cloth. 6. If the stain persists, repeat the process or use a commercial stone cleaner suitable for Basalt surfaces. Remember to clean up spills immediately to prevent stains from setting in. Avoid using abrasive cleaners or scrubbers that may damage the surface of the Basalt countertop.Read More
-
How to remove coffee stain from Lava Stone kitchen counters?1. Blot the Stain: Use a clean, dry cloth to blot as much of the coffee stain as possible. Do not wipe, as this can spread the stain. 2. Mix Baking Soda and Water: Mix some baking soda and water to make a thick paste. 3. Apply the Paste: Apply the paste to the coffee stain and spread it out evenly over the stain. 4. Let it Sit: Let the baking soda paste sit on the coffee stain for 15-20 minutes, or until it is completely dry. 5. Scrub the Stain: Use a stiff-bristled brush to scrub the baking soda paste and the coffee stain. Scrub in a circular motion, and make sure to cover the entire stained area. 6. Rinse with Water: Use a damp cloth to rinse the area with clean water, then dry it thoroughly with a clean towel. 7. Repeat if Necessary: If the stain is still visible, repeat the process until it is fully removed.Read More
-
How to remove coffee stain from Gneiss kitchen counters?To remove a coffee stain from Gneiss kitchen counters, follow these steps: 1. Wet a sponge or cloth with warm water and wipe the stained area to remove any loose debris. 2. Create a paste by mixing baking soda and water (use one part of baking soda to three parts of water). 3. Apply the baking soda paste to the stain and let it sit for at least ten minutes. 4. Scrub the stain with a soft-bristled brush or a sponge to lift the stain. 5. Rinse the area with warm water to remove any residue. 6. If the stain persists, apply a few drops of liquid dishwashing detergent on top of the baking soda paste and repeat the process. 7. Rinse the area thoroughly with warm water and wipe it dry with a clean cloth. Using a granite cleaner, like this one from Granite Gold, is also an effective way to lift coffee stains. Spray the cleaner onto the stained area and let it sit for a few minutes, then wipe it with a damp cloth. Note: Gneiss is a type of metamorphic rock that is used for kitchen countertops, but it is very similar in composition to granite. Therefore, the cleaning process for both materials is very similar.Read More
-
How to remove coffee stain from Soapstone kitchen counters?1. Blot the stain immediately: As soon as you notice the coffee stain, take a paper towel or cloth and blot the stain. Do not rub the stain, as this can make it worse. 2. Use dish soap: Mix a few drops of dish soap with warm water and apply it to the stain. Let it sit for a few minutes before scrubbing it off with a soft-bristled brush. 3. Baking soda and water: Make a paste of baking soda and water and apply it to the stain. Let it sit for a few minutes before scrubbing it off with a soft-bristled brush. 4. Hydrogen peroxide: Mix equal parts of hydrogen peroxide and water and apply it to the stain. Let it sit for a few minutes before scrubbing it off with a soft-bristled brush. 5. Vinegar: You can use either white vinegar or apple cider vinegar. Apply vinegar directly to the coffee stain and let it sit for a few minutes before scrubbing it off with a soft-bristled brush. 6. Specialized cleaners: There are also cleaners specifically designed for soapstone counters that can be used to remove coffee stains. Follow the instructions on the package carefully. 7. Rinse thoroughly: After cleaning the coffee stain, make sure to rinse the area thoroughly with water and dry it with a clean cloth.Read More
-
How to remove water stain from Blue Stone kitchen counters?To remove a water stain from Blue Stone kitchen counters, follow these steps: 1. Mix equal parts of baking soda and water to form a paste. 2. Apply the paste to the water stain on the Blue Stone counter. 3. Use a clean, damp cloth to gently rub the paste into the stain. 4. Let the paste sit on the stain for about 10 minutes. 5. Rinse the paste off with clean water. 6. Dry the Blue Stone counter with a clean towel. 7. If the stain is still visible, repeat the process until the stain is completely removed. Note: Avoid using acidic or abrasive cleaners on Blue Stone counters, as they can damage the surface.Read More
-
How to remove water stain from Terrazzo kitchen counters?Here are the steps to remove water stains from Terrazzo kitchen counters: 1. Clean the countertop with a mild soap and water solution. Rinse well and dry with a clean towel. 2. Make a solution of equal parts water and vinegar. 3. Soak a towel or rag in the vinegar solution. 4. Place the towel or rag on the water stain and let it sit for 10 to 15 minutes. 5. Remove the towel or rag and wipe the area with a clean, damp cloth. 6. If the stain is still visible, combine baking soda and water to make a paste. 7. Apply the paste to the stain and gently scrub with a soft-bristled brush. 8. Rinse the area with water and dry with a clean towel. 9. If the stain persists, repeat the process or use a specialized Terrazzo cleaner. Note: Avoid using abrasive cleaners or tools as they can scratch and damage the Terrazzo surface.Read More
-
How to remove water stain from Quartz kitchen counters?To remove water stains from Quartz kitchen counters, follow these steps: 1. Mix equal parts vinegar and water in a spray bottle. 2. Spray the solution onto the affected area and let it sit for 10-15 minutes. 3. Using a soft cloth or sponge, gently scrub the area in a circular motion. 4. Rinse the area with water and dry it with a clean towel. 5. If the stain is still visible, repeat the process until it disappears. Note: Avoid using abrasive cleaners or scouring pads, as they can damage the surface of the Quartz.Read More
-
How to remove water stain from Engineered Stone kitchen counters?To remove water stains from Engineered Stone kitchen counters, you can try the following steps: 1. Make a paste with baking soda and water. Mix equal parts of baking soda and water in a bowl to create a thick paste. 2. Apply the paste to the water stain. Using a non-abrasive sponge, apply the baking soda paste to the water stain on the engineered stone surface. 3. Scrub the surface gently. Use circular motions with the sponge to scrub the surface gently. Be careful not to use too much pressure as this can damage the engineered stone. 4. Rinse with water. Using a clean, damp cloth, rinse the area with plain water to remove any excess baking soda residue. 5. Dry the surface with a soft towel. Use a soft towel to dry the surface thoroughly. If the water stain is stubborn and doesnt appear to be coming out with the baking soda paste method, you can also try using a specially formulated cleaner for engineered stone surfaces. Always follow the manufacturers instructions carefully when using any cleaning product.Read More
-
How to remove coffee stain from Sintered Stone kitchen counters?1. Blot up as much of the coffee stain as possible with a clean cloth or paper towel. 2. Mix a solution of equal parts water and vinegar. 3. Apply the solution to the stain and let it sit for a few minutes. 4. Gently scrub the stain with a soft-bristled brush or a non-abrasive sponge. 5. Rinse the area thoroughly with clean water. 6. If the stain persists, mix a paste of baking soda and water and apply it to the stain. 7. Gently scrub the stain with the baking soda paste and a non-abrasive sponge. 8. Rinse the area thoroughly with clean water. 9. Dry the area with a clean cloth. 10. Repeat the process as necessary until the coffee stain is completely removed.Read More
-
How to remove coffee stain from Semiprecious Stone kitchen counters?1. Blot up the excess coffee: Use a clean cloth or paper towel to absorb as much of the excess coffee as possible. 2. Make a cleaning solution: In a bowl, mix together equal parts of baking soda and water to create a paste. You can also add a drop of dish soap for better cleaning. 3. Apply the paste: Use a soft-bristled toothbrush or a cloth to apply the paste to the stain. Rub gently in a circular motion. Be careful not to scrub too hard as it can scratch the surface of the stone. 4. Let it sit: Let the paste sit on the stain for at least 15-20 minutes. This will give enough time for the cleaning solution to break down the coffee stain. 5. Rinse with water: After the waiting period, rinse the area with water to wash away the paste and the coffee stain. 6. Dry the surface: Dry the surface with a clean cloth or paper towel. 7. Repeat if necessary: If the stain persists, repeat the process until the stain is completely removed. Note: Do not use vinegar or acidic cleaning products on semiprecious stone counters as they can damage the surface.Read More
-
How to remove coffee stain from Porcelain kitchen counters?Heres how to remove a coffee stain from porcelain kitchen counters: 1. Blot up the excess coffee with a clean cloth or paper towel. 2. Mix a solution of equal parts water and vinegar. 3. Dip a clean cloth in the solution and wring it out. 4. Apply the solution to the coffee stain and let it sit for 10-15 minutes. 5. Use a soft-bristled brush to gently scrub the stain. 6. Rinse the area with water and dry with a clean cloth. If the stain is still visible, repeat the process or try using a commercial porcelain cleaner. Always test any cleaner on a small, inconspicuous area before using on the stained area.Read More
-
How to remove water stain from Artificial Marble kitchen counters?1. Mix baking soda and water to form a paste. 2. Apply the paste to the water stain. 3. Let the paste sit for at least 30 minutes. 4. Scrub the stain gently with a soft-bristled brush. 5. Rinse the counter with warm water. 6. Dry the counter with a clean cloth. 7. If the stain persists, mix equal parts white vinegar and water. 8. Apply the mixture to the stain and let it sit for 30 minutes. 9. Scrub the stain gently with a soft-bristled brush. 10. Rinse the counter with warm water. 11. Dry the counter with a clean cloth.Read More