Artificial Stone Factory Machines in Greece

DIMENSIONS (L X W X H) (MM): 5600 X 2950 X 2250
BLADE DIAMETER (MM): Φ350 – Φ500
BLADE’S VERTICAL SROKE (MM): 250
HEAD INCLINATION (FOR SIDELONG CUTS): 0 – 45 & VERTICALLY
CUTTING TABLE’S ROTATION RANGE: 0 – 360 (ELECTRONICAL CONTROLLED)
POWER OF MAIN ENGINE: 15HP / 11KW
SIZE OF CUTTING TABLE: 0 – 85
WEIGHT (KGR): 4500
AUTOMATICALLY LUBRICATED: AVAILABLE
MATERIAL OF CONSTRUCTION: CAST IRON & IRON
AUTOMATED COPY SYSTEM: AVAILABLE UPON REQUEST
METAL SUPPORTING BASE: INCLUDED
ΜΙΝΙ REMOTE CONTROL

Brand new filterpress for biological water purification, for marble. The machine has 10 plates 60*60.

The Slab vacuum holder, Vacuum Systems & Vacuum Cups

The Slab vacuum holder consists of 12 sucking cups with silicon or foam rubber, a powerful reclining supporting base for crane and a piston with control-manual reclining. Its ability is 500 kg.

Arion - Water Recycling Plants
The system consists of a precipitation tank supplied with water by a submersible pump. The clean water from the precipitation tanks runs over to the clean water tank and by a system of pumps is supplied to the factory (clean water tank and pumps are not supplied). The sludge is dehydrated in a big bag.
The latest and innovative design in the water recycling field is the “Compact Complex” with a capacity of cleaning 200 to 1500lit/min. The Compact Complexes are consisted by all the parts of the traditionally major water recycling complexes in one construction. Moreover, this construction does not need foundation works and is ready to use in just one day!
The water recycling constructions that exceed the capacity of 1500lit/min are designed and constructed according to the needs and uniqueness of every specific application. On the other hand, the water recycling constructions that have capacity lesser than 1500lit/min are standardized according to their dynamic in ones of 200, 400, 600, 800, 1.000 and 1.500 capacity respectively.
RECYCLING WATER OPERATION OVERVIEW
The water recycling system plant consists of the water concentration tank, the precipitation tanks, the clean water tank and the filter press.
All the used water of the factory is concentrate to the underground sludge tank and is pumped to the precipitation tank with the addition of the flocculant by the dozer pump. The water separates from the other materials by the help of the flocculant and runs over the precipitation tank to the clean water tank. The precipitated sludge through the automatic valve at the bottom of the precipitation tank is filling up the sludge mixer tank.
The filter press is filled up with sludge by the sludge tank in high pressure. At the end of the cycle the sludge is dehydrated and easy to handle.
The operation of the complete plant is fully automatic controlled by PLC even the preparation of the flocculant dilution.

The system has the possibility of water and mud treatment without maintainance expenses.
The advantage is that from the moment that the working cycle is completed you will receive:
1) Clear water with low working cost and ready to be re-used
2) The mud goes in special sacks, and afterthe drying of the mud, the sacks are removed.

Portable cutting machine for marble and tiles. Available in various types with angle up to 45° single phase or triple phase current