Basalt Surface Processing Machines in Turkey

Marble Blasting Machine (overall): L: 5.200 W: 3000 H:4500 mm
Blasting stone dimensions (max): H:200 W:700 mm
Blasting cabinet armor: X120Mn12
Rubber Curtains: 4 set
Wheel (Turbine): 1 pcs
Conveyor Speed: 0,5-2m/min (with invertor)
Elevator: Belt bucket system
Separator: Air wash system
Cyclone: Front dust holder
Platform and stairs: necessary places
Control Panel: Inside materials Siemens/ Schneider (plc screen can be done if desired)

Machines that work with automatic loading and unloading robots, allowing you to apply filling and polishing processes to materials such as marble, granite, onyx, travertine, basalt, and more.
Thanks to the sensors at the machine's entrance, the dimensions of the marble slab are measured, and then the polishing process is applied.

https://www.youtube.com/watch?v=OauNoCHXsxU

This brand new technology slab polishing machine which is made in Turkey including the software, has not only a new appearance but also renovated qualities. By lightening the mobile bridge with two different methods, operation speed has been significantly increased compared to traditional machines. Momentum, the new generation slab polishing machine offers operation speed up to 70 m/min to its upcoming owners. Firstly in old slab polishing machines, heavy bridges that carry polishing heads cause loss of energy and restriction of production speed due to inertia. Whereas in Momentum, traditional bridge is eliminated and heads mounted together to form modular units. Dividing into modules each composed of four heads instead of a single heavy bridge is the second method that accelerates the speed.

Number of modules composed of four heads can be offered according to your production needs. Each module can be operated at different speeds simultaneously. So modules can be operated in varying speeds that are optimum required for thick or thin abrasives. Independent modules provide opportunity to continue working in some modules while stopping another module for maintenance or abrasive replacement if needed.

In every Momentum polishing head there is an anti-pressure system active to balance heads’ weight to adjust pressure from pressure scale. Along with precise and effective polishing it prevents over usage of abrasive.

In Momentum the lift off motion of the polishing heads is fixated on maximum 1 cm. from the slab surface. So it promises a homogenous polishing quality all over the slab.

Toksel is the first to use photo-electric sensor technology in slab polishing machines in the world. With the help of photo-electric sensor system slab dimensions and tiny fractures on stones are being scanned at high definition.

By using a double platform in polishing heads, stability and rigidity are achieved. Thereby better and flawless polishing is aimed.

Just like all other products from Toksel, replaceable stainless steel is used under the conveyor belt of Momentum. All the components that are contacting the water are especially chosen as stainless or bronze in order to maximize life expectancy of the machine. Yet another interesting feature of Momentum is the oiling system of polishing heads is automatic and they are using liquid lubricant instead of grease. This detail increases the lifetime of all the mechanical parts and bearings.

https://www.youtube.com/watch?v=OauNoCHXsxU

EM17 - 2+4 Calibrating and Bush-Hammered Machine
• Belt Width: 700 mm
• Number Of Calibrating Heads: 2
• Calibrating Motor Power: 22 kW
• Calibrating Up–Down Motor Power: 0,55 kW
• Diameter of Calibrating Disc Tray: 650 mm
• Working Thickness: 10 – 80 mm
• Diameter Of Bush Hammering Tray: 650 mm
• Number Of Bush Hammering Heads: 4
• Bush Hammering Motor Power: 1,1 kW (126 Rpm)
• Minimum Working Width: 300 mm
• Maximum Working Width: 610 mm
• Belt Motor Power: 0,75 kW
• Belt Speed: 0 – 400 mm / min
• Total Electric Power: 51 kW
• Machine Dimensions ( W / L / H ): 1400 / 6000 / 2200 mm
https://ekizoglumakina.com/en/product/calibrating-hammered-machine-em17

Granite Burning Machine.
- Machine size 9000 x 2100 x 1500
- Machine mode of operation: automatic with smart relays
- Machine slide system: linear slide
- Combustion: AYGAZ OLSYGEN- WATER COOLED
- Up and down adjustable shaking
- Adjustable SWİCH system.
- Machine weight: around 1500 kg
- Machine main construction npu bending
- Machine drum diameter 80 mm
- Bearing drums gear transmission
- PLC SYSTEM
- OPTIONAL entrance and exit tipper stand can be made