Onyx Quarry Cutting Machine

1.Two-cylinder guide is used for lifting the blades , which makes the whole structure more stable and flexible. Higher automatically, it is suitable for all kinds of sandstone.
2.Using automatic intelligent frequency control technology,more convenient ,exact and high efficiency when operated.
3.Unique design of rocker arm, swing arm and main transmission frequency controls the speed, to achieve lift and down the blade quickly and smoothly to meet different cutting requirements.

This kind of saw machine is special for over-sized quarrying which materials are quality and uniform, it's the most economical method to extract the dimensional blocks from quarry, suitable for granite, marble and sand stone quarries. Advantage: stable performance, convenient operation, better shape, less quarrying dust and waste stock debris, safety, protect environment, high efficiency, save mining cost, increase output and recovery.

Machine Introduction
In the traditional rock quarry mining which using dynamic blasting, the rate of finish product is only about 30-35%. DAFON is a quarry equipment manufacturers for the year has rich mining experience in granite/marble/limestone etc.
The new mining method is to apply a double blade stone quarry mining machine to cut the quarry rock directly, the finish product rate can be up to 90%, it improves the utilization of natural resources. Meanwhile double blades quarry mining machine is environmentally friendly equipment which avoids slag dust and smoke pollution during the opening process.
The quality of quarry is improved due to lack of shock and blasting, it is safer for a worker in open pit quarry mining.
This surface mining equipment adopts hydraulic pressure elevating, vibration running, simple circuit, and easy maintenance, which bring high efficiency and economic benefits to customers.

Machine Features:
The quarry surface mining equipment is the transformation of the original two-blade mining machine and suitable for marble and granite quarries. The stone quarry machine is widely used in domestic and aboard, the speed is faster than diamond wire saws. The completed sealed cylindrical guide rail ensure that the guide rail is free from contamination. The machine uses the original lubrication system to effectively improve the service life and utilization rate, and reduce the number of maintenance and cost. It is a significant improvement in the overall efficiency of a mining machine.
The main advantages are easy operation and low investment, small clearance, low wear, no vibration, stable structure, high cutting precision, and improved service life of the cutter head.


Machine Advantage
Increased productivity: Quarry mining machines are designed to work efficiently and effectively, allowing for increased productivity and reduced labor costs.
Cost-effective: Quarry mining machines are designed to operate for a long time and require minimal maintenance, which makes them a cost-effective option for quarry operators.
Safety: Quarry mining machines are designed with safety in mind, with features like backup cameras, automatic braking systems, and other safety features to prevent accidents and protect workers.
Precision: Quarry mining machines are designed to cut through stone and other materials with precision, allowing for accurate cuts and shaping of materials.
Versatility: Quarry mining machines can be used for a wide range of applications, including cutting, drilling, and shaping stone, making them a versatile tool for quarry operators.
Overall, the use of quarry mining machines can provide significant benefits to quarry operators, including increased productivity, cost-effectiveness, safety, precision, and versatility.

Installation Instructions:
1.Pave the track, if the site is not flat, use wood blocks or stones to pad the track basically and fix it, place the machine horizontally on the preset platform to check whether the four wheels are correctly erected on the track and ensure that the four wheels of the machine touch the track at the same time.
2.Installation of tap water supply pipe.
3.saw blade installation: according to the height required to install the required saw blade first loosen the lock nut, take out the outer clamp, then put on the saw blade, saw blade hole placed on the inner clamp tab, then install the outer clamp, lock nut tight.
4.set up the machine cable, connect the machine power, the machine track must be grounded to prevent leakage.

Machine Introduction
In the traditional rock quarry mining which using dynamic blasting, the rate of finish product is only about 30-35%. DAFON is a quarry equipment manufacturers for the year has rich mining experience in granite/marble/limestone etc.
The new mining method is to apply a double blade stone quarry mining machine to cut the quarry rock directly, the finish product rate can be up to 90%, it improves the utilization of natural resources. Meanwhile double blades quarry mining machine is environmentally friendly equipment which avoids slag dust and smoke pollution during the opening process.
The quality of quarry is improved due to lack of shock and blasting, it is safer for a worker in open pit quarry mining.
This surface mining equipment adopts hydraulic pressure elevating, vibration running, simple circuit, and easy maintenance, which bring high efficiency and economic benefits to customers.
Machine Features:
The quarry surface mining equipment is the transformation of the original two-blade mining machine and suitable for marble and granite quarries. The stone quarry machine is widely used in domestic and aboard, the speed is faster than diamond wire saws. The completed sealed cylindrical guide rail ensure that the guide rail is free from contamination. The machine uses the original lubrication system to effectively improve the service life and utilization rate, and reduce the number of maintenance and cost. It is a significant improvement in the overall efficiency of a mining machine.
The main advantages are easy operation and low investment, small clearance, low wear, no vibration, stable structure, high cutting precision, and improved service life of the cutter head.
Machine Advantage
Increased productivity: Quarry mining machines are designed to work efficiently and effectively, allowing for increased productivity and reduced labor costs.
Cost-effective: Quarry mining machines are designed to operate for a long time and require minimal maintenance, which makes them a cost-effective option for quarry operators.
Safety: Quarry mining machines are designed with safety in mind, with features like backup cameras, automatic braking systems, and other safety features to prevent accidents and protect workers.
Precision: Quarry mining machines are designed to cut through stone and other materials with precision, allowing for accurate cuts and shaping of materials.
Versatility: Quarry mining machines can be used for a wide range of applications, including cutting, drilling, and shaping stone, making them a versatile tool for quarry operators.
Overall, the use of quarry mining machines can provide significant benefits to quarry operators, including increased productivity, cost-effectiveness, safety, precision, and versatility.

Installation Instructions:
1.Pave the track, if the site is not flat, use wood blocks or stones to pad the track basically and fix it, place the machine horizontally on the preset platform to check whether the four wheels are correctly erected on the track and ensure that the four wheels of the machine touch the track at the same time.
2.Installation of tap water supply pipe.
3.saw blade installation: according to the height required to install the required saw blade first loosen the lock nut, take out the outer clamp, then put on the saw blade, saw blade hole placed on the inner clamp tab, then install the outer clamp, lock nut tight.
4.set up the machine cable, connect the machine power, the machine track must be grounded to prevent leakage.