Quartzite Factory Machines in Spain

Ref. 50161 Manual telescopic crane arm, extendable in length from 2.2 meters to 3.2 meters. Load capacity 500 Kg

Jib arm for loading and unloading bundles for forklift
Ref. 50184 technical characteristics

Our cutting line N.2405/2200 has been designed to obtain maximum production with minimum operator labor and maximum reliability in the machines that make it up.
The general dimensions of the production line have been adjusted to the needs of the client, following the criteria established by it, in terms of the dimensions of the pieces to be manufactured and the final products obtained.
The entire line is characterized by the robustness and reliability of the machines that make it up, all of which are designed to withstand the harshest working conditions, and it is precisely in this aspect that we can contribute all the experience
accumulated over the years that We have been designing and manufacturing machinery for this sector.
One of the great advantages that we can highlight of the machines of this production line is that they are models with designs that have already been evaluated in their operation, and that they only differ from our series machines in their fundamental dimensions, but not in all the components that they incorporate. .
The longitudinal cutter with 2 heads on a mobile bridge N.8500-2C and the transversal cutter with 2 heads N.8500-2C, are machines equipped with the latest technological advances in terms of their mechanical and electronic design. What stands out above all are the linear guide systems of the headstock bridge supported by two beams parallel to the cutting table, the first and perpendicular to the second, with precision linear guides and high-precision, high-rigidity recirculating ball slides, on the that it displaces, to carry out the cutting tasks.
The movable disc holder heads supported on linear guides on the bridge, with recirculating ball sliders, also carry out the vertical movement guided on recirculating ball sliders and driven by a laminated spindle with recirculating ball nut, to be able to position very quickly. and precision, leaving the entire assembly perfectly protected by PVC bellows.
Head holders equipped with translation movement through a displacement motor reducer controlled by a frequency converter and a magnetic rule for positioning on the X axis, and a head driven by a spindle and an electric motor reducer for vertical positioning of the cut on the Z axis. The positioning of the heads is simultaneously thanks to the independent converters of each head.
The N.2304 cutting tables are built with a steel structure with a rectified upper plane, on which the motorized transport belt rests with a rubber-coated outer surface to prevent the displacement of the material during the cutting phase. A device to stop the stone, located on the table of the second crosscutter, allows to greatly reduce the times during the crosscutting process.
The table N.2590, located at the exit of the longitudinal cutter, has a system of physical stops, actuated pneumatically, that allows the selection of the strips that have been previously cut according to the width for their subsequent processing in the longitudinal cutter.
The second table N.2585 has a dragging device to join and align the strips prior to their processing in the transversal cutter, as well as the removal of longitudinal waste.
The unloading tables with band N.2426 have a frame built based on steel profiles with a transport band for unloading the cutting table, simultaneously, while the crosscutter already receives the next board and is ready to cut.
Work areas are protected, limiting access to risk areas by means of protection fences and photocells, to avoid any risk of accident.
All machines and heads are equipped with an implantation system with centralized greasing for quick and easy maintenance.
In the electrical and control installation section, it is worth highlighting the implementation of state-of-the-art automatons with programs custom designed by our technical department, so that the programming of the machines is as simple as possible for the operators, avoiding thus wasting unnecessary time. The programming of the work cycle and the visualization of its sequence is carried out on two operator terminals with a screen, where all the work parameters are displayed, as well as the cutting cycles.

The cutting line N.2405/2200 is made up of:
– 1 Longitudinal Cutter Model N.8500/800-2C.
– 1 Transverse Cutter Model N.8500/800-2C.
– 2 Motorized band tables Model N.2304.
– 1 Double displacement table with driver and motorized rollers N.2585.
– 1 Table with N.2590 plate selection stops.
– 1 plastic roller table N.2274-J.
– 1 motorized band table for material output Model N2426.
– 1 motorized band table with hatch.
– Security fencing.
LONGITUDINAL CUTTER CHARACTERISTICS N.8500/800-2c

Characteristic Specification
Machine width 5500mm
Raceway length 5500mm
Maximum separation between discs 2200mm
minimum separation between discs 200mm
Cutting disc diameter 800mm
Maximum height pieces to be cut 300mm
Disc motor power 30 hp (2)
Total installed power 67.5 hp
Water consumption per disc 30 – 40 l/min
CHARACTERISTICS TRANSVERSE CUTTER N.8500/800-2c

Characteristic Specification
Machine width 5950mm
Raceway length 5500mm
Maximum separation between discs 3500mm
minimum separation between discs 200mm
Cutting disc diameter 800mm
Maximum height pieces to be cut 300mm
Disc motor power 30 hp (2)
Total installed power 67.5 hp
Water consumption per disc 30 – 40 l/min
TABLE CHARACTERISTICS WITH BAND N.2304/2200

Characteristic Specification
table width 2957mm
max length of the table 4044mm
width max. band 2200mm
Belt displacement speed 6.5m/min
Drive motor power 4.5 hp
CHARACTERISTICS OF MOTORIZED ROLLER TABLE N.2274/2200

Characteristic Specification
table width 2929mm
max length of the table 3500mm
width max. worked 2200mm
forward speed 6.5m/min
Drive motor power 1 hp
CHARACTERISTICS OF MOTORIZED ROLLER TABLE WITH DOUBLE DISPLACEMENT N.2585/2200

Characteristic Specification
table width 2929mm
max length of the table 3700mm
width max. worked 2200mm
Roller advance speed 6.5m/min
Roller drive motor power 1.5 hp
Centering displacement speed 3.1m/min
Motor power after cross 2 hp
CHARACTERISTICS OF MOTORIZED ROLLER TABLE WITH DOUBLE DISPLACEMENT N.2585/2200

Characteristic Specification
table width 2929mm
max length of the table 3900mm
width max. worked 2200mm
Roller advance speed 6.5m/min
Roller drive motor power 1.5 hp

MEASURING SYSTEM
MILLENNIUM LASER 3D
New 3D measurement system: Greater measurement precision through a fine adjustment system for the most precise orientation. In conjunction with your professional tripod, it becomes a perfect high-precision measurement solution.
With 3D measurement, this system allows you to take measurements of flat and vertical surfaces generating three-dimensional measurements (eg kitchen countertop + front).
With this system you will make complete measurements of countertops, facades, templates, stairs, offsets, curves, swimming pools... in a few minutes.
The ideal complement for the cutters of the MILLENNIUM CNC 5 and IMAGE CNC ranges to optimize work operations. Defines a final file that can be executed directly by the machine, without the need for intermediate processes, which reduces measurement times, drawings, hole embedding, etc...

For the transport of heavy tonnage loads inside industries with one axle. These heavy duty trolleys, manufactured entirely by HERSEN, can withstand loads of up to 80 tons. They are certified and have successfully passed the relevant tests in technological institutes. The model shown in the photos (Ref 50458) corresponds to an example capable of transporting loads of up to 20 tons in very small spaces. The measurements of this particular unit are 3m x 2.6m. However, at HERSEN we design and tailor any order of this type to adapt at all times to the customer’s needs.Our range of industrial trailers is equipped with double wheels to distribute weight and improve safety. In addition, thanks to the rubber surface that each wheel has, they are designed to adapt to the irregularities of the ground and avoid vibrations on the load. The turning system allows each of the wheels to adapt independently to the necessary radius that each one must make to make the curve and stabilize the load. The steering has an advanced regulation system to maintain the alignment of the wheels and thus avoid their wear. The configuration of the rotating system of industrial trailers can be:
Simple System: With this system, the front wheels turn following the tiller.
The tiller is vertically flexed to accommodate different hitch heights on towing vehicles. The rudder has a support that is adjustable to be able to adjust the height.
On the other hand, the industrial trailer has safety bars, they are specially manufactured for heavy-duty trolleys, they protect the operator from falling boards during loading and unloading. It has several snap positions to insert the safety bars that adjust according to the number of boards that have been loaded.
The most used measures are:
2.5 x 3m for loads from 12 to 20tn.
HERSEN table pack cart references:
50458 Load capacity from 12 Tn to 80Tn single turn.
The entire manufacturing process of transport trolleys and cargo trolleys, from their design to their final installation, is carried out by HERSEN as well as the training given to know all the details of use and technical assistance.
If you require other types of measurements, characteristics or special applications of this type of industrial trolley, we can manufacture them with different load capacities, up to 80Tn. You can simply contact us and we will inform you about our manufacturing possibilities for all types of board transport trolleys.

Our cutting line N.2995-4C has been designed to obtain maximum production with minimum operator labor and maximum reliability in the machines that make it up.
The general dimensions of the line have been adjusted to the needs of the client, following the criteria established by it, in terms of the dimensions of the pieces to be manufactured and the final products obtained.
The entire line is characterized by the robustness and reliability of the machines that make it up, all of which are designed to withstand the toughest working conditions, and it is precisely in this aspect that we can contribute all the experience accumulated over the years that We have been designing and manufacturing machinery for this sector.
One of the great advantages that we can highlight of the machines of this cutting line is that they are models with designs that have already been evaluated in their operation, and that they only differ from our series machines in their fundamental dimensions, but not in all the components that they incorporate. .
The motorized roller loading table constitutes the feeding point to the cutting unit. In addition, it acts as an intermediate warehouse so that the downtime of the cutting unit is minimal.
The cutter with 4 heads on mobile bridge N.8500, is a machine equipped with the latest technological advances in terms of its mechanical and electronic design. Above all, the linear guidance systems of the headstock bridge supported by two beams parallel to the cutting table stand out, with precision linear guides and high-precision, high-rigidity recirculating ball slides, on which it moves, to carry out the work. cutting.
The movable disc-holder heads supported on linear guides on the bridge, with recirculating linear ball slides, also carry out the vertical movement guided on recirculating ball slides and driven by a spindle.
laminated with ball recirculation nut, to be able to position with great speed and precision, leaving the whole assembly perfectly protected by PVC bellows.
Headstock equipped with translation movement through a displacement motor reducer controlled by a frequency converter and a magnetic rule for positioning on the X axis, and a head driven by a spindle and an electric motor reducer for vertical positioning of the cut on the Z axis. The positioning of the heads is simultaneously thanks to the independent converters of each head.
The whole machine and the heads are equipped with an implantation system with centralized greasing for easy maintenance.
Automatic rotary cutting table, it is built on a steel structure with a rectified upper plane, on which the conveyor belt rests with the outer surface covered with rubber to prevent the sheets from slipping during the cutting phase.
The unloading table with band has a frame built based on steel profiles with a transport band for unloading the cutting table simultaneously, while the cutting unit already receives the next board and is ready to cut.
In the electrical and control installation section, it is worth highlighting the installation of state-of-the-art automatons with programs custom designed by our technicians, so that the programming of the machine is as simple as possible, thus avoiding losses of unnecessary time. The programming of the work cycle and the visualization of its sequence is carried out on an operator terminal with a screen, where all the parameters of the cutting cycle are displayed.
The cutting line N.2995-4C/2200-G basically consists of:
– 1 Motorized plastic roller table N.2274
– 1 Cutter with 4 Ø600 heads and mobile bridge, model N.8500-800/4C
– 1 Rotating and motorized band table, model N.2304-G
– 1 Motorized band table for material outlet, N.2426.
CHARACTERISTICS OF MOTORIZED ROLLER TABLE N.2274/2200

Characteristic Specification
table width 2929mm
length max. of the table 3500mm
width max. worked 2200mm
forward speed 11.5m/min
Drive motor power 1.5 hp
CHARACTERISTICS ROTATING TABLE WITH BELT N.2304/2200

Characteristic Specification
table width 2957mm
length max. of the table 4044mm
width max. worked 2200mm
Belt displacement speed 11.5m/min
Drive motor power 4 hp
CHARACTERISTICS OF MOTORIZED BELT TABLE N.2426/2200

Characteristic Specification
table width 2929mm
length max. of the table 3500mm
width max. worked 2200mm
Roller advance speed 11.5m/min
Roller drive motor power 3 hp

Hersen Industrial Trailer
The HERSEN Industrial Trailer is a breakthrough in the logistics and transportation of heavy cargo in reduced spaces. These heavy cargo trolleys, made entirely by HERSEN, can support loads of up to 72 tons. They are certified and have passed all relevant tests in technological institutions.
The model shown in the photos (Ref 50458) shows an example capable of transporting cargo of up to 14 tonnes in very reduced spaces. The measurements of this particular unit are 3m x 2.6m. However, at HERSEN we design and custom-manufacture any request of this type to meet the client’s requirements.
Our range of industrial trailers comes equipped with double wheels to distribute the weight and increase safety. Additionally, the rubber surfaces on each wheel are designed to adapt to uneven floors, thus minimising vibrations on the load. The rotation system means that each of the wheels adapts to the radius required to manoevre the curve and stabilise the cargo. The steering has an advanced control system to maintain wheel alignment and thus avoid wear and tear.
The rotating system of industrial trailers can be:
Jumbo System: All the wheels can rotate conforming to the rotation of the pulling rudder to manoevre the curve. This facilitates manoeuvrability and reduces the space necessary to complete the turn. It is especially useful in premises where there is very limited space to manoeuvre.

The HERSEN jib crane is ideal for any job requiring the lifting and transportation of material within a medium-length slewing range. It is a very useful tool in workshops where it is used as the only lifting machine and in areas which service concrete points of the workshop, where the gantry crane cannot reach. It is also a good complementary tool in certain areas of the facilities, when the gantry crane is needed in other areas, thus avoiding wasted time.

This type of device is always made to order so that it can be adapted to the requirements of each individual client. There are different manufacturing models. The client can decide from the following options:

Maximum length of the jib
Maximum height of the jib
Maximum load
Maximum slewing range. This can be either 270º or 360º
Moving the hoist: manual or motorised
Raising the load: manual, using electric hoist or using pneumatic hoist
Slew of the jib: manual or pneumatic
Maximum height of the column
Type of jib: with belt or flush with the top of the column
The column needs to be fixed to a foundation whose dimensions will depend on the maximum load to be lifted and on the length of the jib. The crane comes supplied with an anchor, to be inserted into the foundation for the crane, to which it is subsequently attached.
The model seen in the photos corresponds to a unit recently manufactured at the HERSEN plant. This particular column-mounted jib crane measures 5 metres in height. The column alone has a height of 4.5 metres. The maximum load that can be borne by this device is of 500 kg.
If you are interested in ordering one of these models or would like more information, please do not hesitate to contact us and we can supply all the technical details you need. You can contact us directly using the form, by calling us at +34 96 160 98 05, or by e-mail at our contact address: hersen@hersen.com.

Trolley with hydraulic arm for handling installation and for slabs of porcelaine, glass, marble and granit
Ref .: 880-300 Technical characteristics:
Robot Setter for the manipulation, setting up and installation of porcelain, marble, granite and glass slabs
The movement of the robot is done manually
Maximum capacity 300 Kg
(See table of load capacities based on arm length)
Powered by replaceable batteries
It consists of a battery with its charger
Hydraulic boom lift
Manual or hydraulic telescopic arm
Pneumatic rubber wheels
360º swivel attachment at the end of the arm to rotate the suction cup
Lateral and frontal translation of the head
Robot Weight: 250kg
Total weight of the 12 counterweights of the Robot: 250kg
Robot weight + the 12 counterweights: 500kg
Maximum height from the ground to the center of the 4 suction cups with the table vertically: 2.43m
Maximum height from floor to table horizontally: 2.83m
As an option, it can be supplied with an independent 4-plate suction cup with battery and quick coupling to separate the suction cup from the robot. The suction cup, by remote control, can be operated to open and close and can be raised independently.

One-base Industrial Suction Pads
These are reduced-sized suction pads that have various loading capacities from 100 kg to 800 kg, suitable for smaller-sized pieces.
Their big advantage is that they facilitate and speed up the loading, unloading and handling of parts such as slabs, flooring, steps, cladding, kerbs, etc. Additionally, they can move pieces from a horizontal to a vertical position easily and securely, both manually and automatically.
This product improves the ergonomics of the marble worker, reducing muscle fatigue and strain from the effort involved in handling marble.
They can be installed on bridge-cranes, jib cranes, crane trucks and forklifts.
They can be operated using compressed air (venturi) or a vacuum pump.
Ref.50701

Two-base Industrial Suction Pads
Equipment with two-base industrial suction pads on a chassis or metal structure with loading capacities from 250 kg to 800 kg, suitable for longer pieces in order to prevent the product from bending and cracking.
Its great advantage is that it facilitates handling, loading and unloading long pieces such as kitchen worktops.
The two suction pads move independently of each other. Thus, the suction pads can be fixed onto the section of the piece you want, thus avoiding the parts where they cannot be attached, such as holes, gaps, recesses, etc.
Also, the chassis is made with a swing angle, with the aim of enabling you secure the suction pad on counter tops with “L” shaped parts, so that the suction pad fits the shape of these pieces and lifting the marble is made more secure and balanced.
The movement of counter tops from a horizontal to a vertical position is made easy, manually or with a valve.
The two-base suction pads improve the ergonomics of the marble worker, reducing muscle fatigue and strain from the effort involved in handling marble.
They can be installed on bridge-cranes, jib cranes, crane trucks and forklifts.
The two-base suction pads can be operated using compressed air (venturi) or vacuum pump.
Maximum loading capacity: 500kg.
Ref.50702

Vacuums for slabs the large format porcelain
vacuums for slabs the large format porcelain
Ref. 50720-8-250
8-point vacuum by compressed air. It is especially recommended for manipulations:
Of box
From box to box
From easel to box
From easel to easel.
-In picking operations it is a very effective and fast option.
-Electric 8-point vacuum: This option is recommended to be placed on overhead cranes. The abatement can be manual or motorized.

Equipped with three suction pads on a chassis or metal structure with a loading capacity of 250 kg up to 1000 kg.
These three-base suction pads lift, move, load and unload large or longer pieces of marble, like counter tops, large slabs or fragile and delicate materials. These are pieces which, in addition to the consideration of the weight to be lifted, need to be lifted from three different points in order to prevent the less stable parts of the piece from splitting, as can happen in cases where they are gripped at only one point. For example, on a kitchen worktop, where there is a gap, the sides are more fragile and thus it is difficult to lift the piece without splitting it. The three-base sucker pad makes it possible to lift the base by gripping various points without it splitting.
Thus, these industrial suction pads lift and handle the marble conveniently, safely and easily.
All the suction pads are independent from each other and so it is possible to move, omit or activate each suction pad according to the requirements of each job (for example, a gap).
The movement of counter tops from a horizontal to a vertical position is made easy, either manually or using a valve.
The three-base suction pads improve the ergonomics of the marble worker, reducing muscle fatigue and strain from the effort involved in handling marble.
They can be installed on bridge-cranes, jib cranes, crane trucks and forklifts.
They can be operated using compressed air (venturi) or vacuum pump.
Ref.50703

– Platform with a robust oversized structure to guarantee a long life in extreme load and environmental conditions.
– Trestle with double stowage for boards or slabs, which allows the automatic feeding or stowage of the same from the production lines from one side of the stowage and the manual loading or removal by the operators simultaneously from the other side of the stowage. With this application, machine downtime is reduced, achieving a higher degree of operability and therefore of production of the work lines.
– Swivel base on a toothed slewing ring and support wheels, driven by an electric motor-reducer and with turns positioned at 0o and 180o.
– The operator's position is protected, limiting access to work areas by photoelectric barriers, to avoid any risk of accident.
– The entire structure is oversized and calculated to support loads of 20+20 tons.
– The slewing ring and the bearings installed in the wheels have been sized to withstand radial and axial loads at the time of load and rotation.

Vacuum cup for handling kitchen countertops
Ref. 50790 technical characteristics:
Two-point suction vacuum with adjustable ends for handling L-shaped or square kitchen countertops.

Eight points vacuum for sandwich panels with depressor and radio control
Ref. 50790-8 technical characteristics:
Load capacity: 300kg
Tare: 200kg
Extensible structure with two telescopic arms:
Length collected: 4m
Stretched length: 7m
Tipping equipment in all directions without loss of oil or acids
Balance with ropes to be able to make the turn up to 90º
Suction cups with anti-oil rubber and mounted on a suction cup with springs
Compressed air supply
Pump group with:
Rotary pump
Double tank
Double tap circuit
Visualization and vacuum control
Anti-drop valve
Vacuum filter
Condensation filter
Action with ball valve
Batteries with gel charge and 24 volt power plus spare battery
Acoustic-visual alarm in reference to the minimum / maximum pressure
Accidental anti-drop device
Remote radio control

Ref. 50760-1 Technical characteristics:
Fixed central structure and mobile arms in tubular structure with high elastic limit
4 mobile suction cups 500 x 300 mm.
Load capacity 800 kg
Vacuum pump integrated into the suction cup
Inclination from 0º to 90º manual
Display control and vacuum indicator
R6 hydraulic hoses
Anti-fall valve
Vacuum filter
Security system
Acoustic-visual alarm of minimum and maximum pressure
Vacuum reserve tank in case of accidental failure
Central handle with controls

Ref.50760-2 ELECTRIC VACUUM LIFTER POWERED BY ELECTRIC PUMP AND ELECTRIC TILTING
Technical Characteristics:
Fixed central structure and mobile arms in tubular structure with high elastic limit.
Equipment with 4 mobile suction pads of 500x300mm
Structure with 0˚-90˚ electric tilting
Powered by electric pump on the equipment
Hidraulic hoses R6
loading capacity charge 700Kgs
Vacuum gauge
No falling non return valve for vacuum
Security system
Safety tank for vacuum reserve in case of accidental failure.
Acoustic and visual alarm of minimum and maximum pressure.
Central handle with the controls.

– Platform with a robust oversized structure to guarantee a long life in extreme load and environmental conditions.
– Motorized trolley support rails welded to the structure.
– Swivel base on a toothed slewing ring and support wheels, driven by an electric motor-reducer and with turns positioned at 0o and 180o.
– The operator's position is protected, limiting access to work areas by photoelectric barriers, to avoid any risk of accident.
– The entire structure is oversized and calculated to withstand loads of 35 tons.
– The slewing ring and the bearings installed in the wheels have been sized to withstand radial and axial loads at the time of load and rotation.

Industrial vacuum load handlers allow lifting, turning and turning loads as diverse as bags, boxes, containers, drums, pallets, toilets, marble, porcelain and solid surfaces up to 265Kgs. Operation is intuitive, smooth and fast performing all the functions of grabbing the load, raising it, lowering and releasing the load from a single control, the manipulator handle.
Lifting is simple and safe, both for people and for the product. They can be installed to optimize any manufacturing and handling process, in logistics warehouses, for picking and order preparation. Its ergonomics, functionality and safety reduce effort and optimize productivity, reducing user fatigue and injuries.
How does the vacuum manipulator work?
The manipulator uses vacuum to hold and lift the load. The air is guided through a filter and an air pipe, to raise the lifting tube with which the manipulator is equipped. The vacuum within the lift tube is regulated from the manipulator’s control handle. This manipulator is where the suction unit is attached, which is the one that will be in contact with the material to be handled.
When the partial vacuum increases, the lift tube shrinks and lifts the load. When the partial vacuum is reduced, the lift tube is stretched, lowering the load. The sniffer keeps the load safely gripped until it reaches the ground. In the event of power loss or a power outage, a safety valve acts in such a way that the load descends in a smooth and controlled way to the ground.
We have stainless steel handling equipment for the food, pharmaceutical, cosmetic, chemical, and logistics industries. We also carry out special applications for clean areas, corrosive environments and ATEX areas.
What sipper to use?
We develop standard and special suction pumps on request, made to measure according to the type of load, weight, suction surface and the type of handling required for each product and application.
We can handle boxes with the product inside, both open and closed, with seal or staples.
Irregular boxes with fragile products inside the boxes can also be handled and lifted and stacked.
We develop standard and special suction pumps on request, made to measure according to the type of load, weight, suction surface and the type of handling required for each product and application.
We can handle boxes with the product inside, both open and closed, with seal or staples.
How is the vacuum generated?
The vacuum pump is what runs the entire system. The vacuum is generated by means of a high-performance, low-consumption vacuum motor-pump. This motor pump can be installed up to 30m away from the lifting point. A remote control can be installed to operate the pump without leaving the duty point.
Where to install the load handler?
They can be installed on our light profile jib cranes and overhead cranes. The overhead crane or jib crane supports the lifting equipment. We offer a wide range of lifting systems such as column cranes, jib cranes, light overhead cranes, suspension cranes, mono-rail cranes, low height cranes, Bridge cranes with frame structure. We provide from the design to the execution of the “turnkey” tailor-made project for the handling of almost any type of material.

– Motorized block holder carriage for Multiwire Cutter.
– Maximum load: 35 tons.

Robot for finishing and palletizing with articulated vacuum suction cup for granite curbs.
It is made up:

Robot mod. KR-360.
Chamfering group, disc housing, water diffuser, etc.
Flame torch, regulators, valves, etc.
Vacuum group, with pump, tank, suction cup, valves, etc.
Electrical panel, and control panel with touch screen.
Belt feeding table.
Curb bumping and squaring device.
Turning table for the elaboration of curbs.
Security fencing to limit access to the mobile part of the machine.
The Robot is specially designed to carry out automated tasks in the performance of curb finishing tasks, milling of edges or rounding, flaming of faces and their subsequent palletizing, based on the same operating principles applied in standard Nodosafer machining and palletizing, and offers multiple advantages: optimization of work processes, reduction of cycle times and efficient use of downtime, etc.
On the wrist of the Robot, a compact and specially designed head is implemented, on which the milling motor group is supported, the torch for flaming, as well as a suction cup for handling.
The reception suction cup, also of a particular design, is made up of a rectangular plate, capable of supporting horizontal loads of up to 160 kg.
The motorized belt table, located at the entrance of the Robot, constitutes the feeding point to the treatment unit. In addition, it acts as an intermediate warehouse to guarantee the fluidity of the work cycle and minimize downtime for the entire line. It basically consists of a frame based on steel profiles on which the roller shafts rest.
All the wheels are frictioned to thus facilitate the synchronism of the advancement speeds of the tiles throughout the line.
A double device for bumping and squaring located on the band table, allows the positioning and control of the curbs before they are received by the robot.
The turning table for the elaboration of the curbs is located in the work area of ​​the robot and allows to greatly reduce the time during the elaboration process.
The work area is protected, limiting access to risk areas by means of protection fences and photocells, to avoid any risk of accident.
The programming and the work sequence is variable and parameterizable, it is done by selecting from the control panel.

The Robot – Palletizer N-3530 with vacuum suction cup, is specially designed to perform automated palletizing tasks, based on the same operating principles applied in standard Nodosafer palletizing, and offers multiple advantages, optimization of the work process, reduction of cycle times and efficient utilization of downtime. The reception suction cup, of particular design, is made up of a rectangular plate, capable of supporting horizontal loads of up to 160 kg.
Work areas are protected, limiting access to risk areas by means of protection fences and photocells, to avoid any risk of accident. All machines and heads are equipped with an implantation system with centralized greasing for quick and easy maintenance.
In the electrical and control installation section, it is worth highlighting the implementation of state-of-the-art automatons with programs custom designed by our technical department, so that the programming of the machines is as simple as possible for the operators, avoiding thus wasting unnecessary time. The programming of the work cycle and the visualization of its sequence is carried out on two operator terminals with a screen, where all the work parameters are displayed, as well as the cutting cycles.

Line for the production of pavers from slabs sawn on both sides. The line is based on three levels of shearing and a robotic cell with artificial vision:
1. Primary shearing 1st: Generates strips of granite from the slab. Maximum dimensions determined by the maximum working width of the shear.
2. 2nd Secondary Shears: Processes the strips from the primary shear, generating paver to be palletized by the robot or paver to be unfolded in half in the 3rd shears.
3. Tertiary shears 3rd: Secondary shears split the cobblestones in half. 4. Robotic cell: Robotic cell for handling pavers, equipped with artificial vision that allows the robot to handle the pavers automatically. At this point we can palletize the pavers on a pallet, or split them in half with the 3rd shears.