Slate Horizontal Pneumatic Mobile Rock Drill

With the characteristics of
1. High efficiency of hole drilling, long life, easy hole joining and little error.
2. The advance device is driven by motor and the control mode adopts electrical self-control principles which ensures the machine maximizing the drilling speed, conserving energy and cutting emission. Meanwhile, it makes less dust, improves the condition to reduce the intensity of labour.

Pneumatic heavy-weight mobile rock line drill is ideal both for primary cutting and sectioning of blocks.
It is designed for vertical drilling operations.
Since it is equipped with 2 or 4 drills on independent columns, it improves drilling rate.
Its total weight is 1200-1700kg.
It can operate without being fixed to the ground at maximum speed.
Specifications
Midium-weight, for both primary drilling and sectioning Horizontal or vertical operations.
Equiped with 1 or 2 rock drills
Product Description
Horizontal pneumatic rock drill:
A slide for horizontal drilling with cylinder-operated down feed or chain feed. It is quickly positioned with wedge pins fixing method. It is ideal for drilling horizontal holes on the same plane as the quarry. The rock drill-holding slide is equipped with a central joint allowing fan-shaped drilling and with a bar anchorage allowing fast lateral moving. Horizontal pneumatic drilling units:
1. Pneumatic drilling slide with cylinder operated down feed or chain, start drilling with 3200 or 2400 mm drill steel
2. Control panel
3.5000 mm guiding and leveling bar or pipe (optional).
4. Pneumatic rock drill YT28.

Pneumatic mobile rock drill (line drilling machine)
Available for horizontal, vertical and slantwise drilling, are mainly used in dimensional stone quarry to divide large blocks into smaller pieces, which is necessary to asist diamond wire saw machine working.
1. Light-weight mobile rock drill, equiped with rock drill 1*YT28. For both vertical drilling and horizontal drilling.
2. Medium-weight mobile rock drill, equiped with 2 rock drills, YT24 or YT28. For both vertical drilling and horizontal drilling.
3. Heavy-weight mobile rock drill, equiped with 4 hammers YT24 or YT28. For vertical drilling only.
The pneumatic mobile rock drill has following advantages:
It helps you to drill holes on a straight line, so you can save the blocks, increasing the daily output.
High drilling efficiency and low energy consumption, low maintenance cost.
Automatically operate, save labor cost.

Hydraulic drilling unit, equipped with a drifter, suitable for vertical and horizontal drilling on any inclined, totally independent, able to increase production and work quality and allows an energetic save and an higher working safety.
With the following characteristics: chain feed slide for drifters, sliding block and truck made in self-lubricating composite material, fast system steel retainer, anti jamming device, hydraulic device for inclinations regulator, radio remote control panel, water or air drain drilling.

Tracked Marble Drilling Rig
-Engine Type: Diesel (Double Engines) (4 Cylinder Air Cooled) 55 kw 80 hp
DEUTZ
-Electricity Power: Electricity Engine 22 kw 30 hp
-Forward and Back Hidromotor: Transmission Boost Bit Left and Righy
rotate Hidromotor
-Machine Forward: 6 Tons Crawler
-Drilling Speed: 2 m / 6 -10 Min. (6-10 Bar)
-Drilling Diameter: 85 mm - 100 mm Between
-Air Consumption: 2,1 m³ - 4,5 m³ (6-10 Bar)
-Tower Angle: Vertical - Horizantal - Parallel – Angled
-Weight: 5.900 Kg
-Dimensions: 6 m x 2,1 m x 2 m
-Accessories: 2m 14+1 Piece Pipe / Fast Drilling Hammer+ bit

Wheeled Marble Drilling Rig
Engine Type: Elektricity - Diesel (Double Engines)
Diesel Engine: (4 Cylinder Air Cooled) 55 kw 80 hp DEUTZ
Electricity Engine:22 kw 30 hp
Forward and Back Hidromotor: Hydromotor - Transmission Boost
Bit Left and Righy rotate Hidromotor: Hydromotor - Transmission Boost
Machine Forward – Back: 3 Wheel Italian Walk
Drilling Speed 2 m / 6 -10 Min. (6-10 Bar)
Drilling Diameter 85 mm - 100 mm Between
Air Consumption: 2,1 m³ - 4,5 m³ (6-10 Bar)
Tower Angle: Vertical - Horizantal - Parallel - Angled
Weight: 5.000 Kg
Dimensions:6 m x 2,1 m x 2 m
Accessories: 2m 14+1 Piece Pipe / Fast Drilling Hammer+Bits