Home ProductsStone MachineryStone Factory MachinesStone Slab Cutting MachinesCNC Bridge Cutting Machine
OZKKM 700/500 AQUILA CNC Bridge Saw Cutting Machine
FOB Price:
Type:
Stone Factory MachinesStone Slab Cutting MachinesCNC Bridge Cutting Machine
Usage:
Granite, Marble, Limestone, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
After-Sale
Warranty:12 Months
Install and Guarantee:Customer pay for installation, Remote guidance installation, Third-party team installation
Maintenance:Online software upgrade, Remote troubleshooting
Machinery Function Features
Saw Motor Power: 20 kW
Max Saw Diameter: 700 mm
Maximum Working Length: 3500 mm
Maximum Working Width: 2100 mm
Maximum Working Thickness: 240 mm
Water Consumption: 50 lt/dk
Machine Length: 5500 mm
Machine Width: 3200 mm
Machine Height: 4000 mm
OZKKM 700/500 AQUILA is monobloc bridge sawing machines that, thanks to the advanced functionality, allow every stone fabrication shop to be equipped with accurate and quick machines, without giving up quality. The standard versions of AQUILA 700/500 is monobloc, i.e.: mounted on a monolithic structure of steel carpentry that assures utmost rigidity and stability levels, with no need of any concrete foundation. For this reason, if necessary, they can be easily moved elsewhere. The monobloc configuration can be exploited also for using these machines as “building“ equipment, i.e. it can be placed time by time near the factory where the coating, flooring, etc. are being done.
OZKKM 700/500 AQUILA is the result of the most advanced designing on computer and the massive use of FEM”* analysis in order to reach a very high rigidity level of the bridge and structures. Even though it is a sawing machines, both have technical solutions similar to the ones of a CNC machine. All the movements of the axes are on linear bearings which do not need to be adjusted. All the lubrication points have been gathered in areas which can easily be seen and reached, without disassembling guards or protections for facilitating ordinary maintenance. High level components are employed. The motors used, except for the Z axis, are servo motors with precision reducers. Especially the high speed of the X axis allows to cut down idle times as much as possible with a productivity increase (the percentage of the time that the disc stays on the material is higher with respect to the time for placing or returning to cut start)
The spindle, anchored in front of the beam to offer the utmost rigidity, can accommodate discs up to a diameter of 700 mm for the AQUILA 700, diameter of 500 mm for the AQUILA 500. The head of that machine can rotate “IN CONTINUOUS” i.e. always making the less route for positioning between one cut and another, for the benefit of productivity. Thanks to this peculiarity, it is possible to draw on the X-Y plane circles and circle arches of any size, in all the positions of the working area. The choice of placing the cutting disc in axis with the head rotation center reduces to zero the efforts on the axis for an excellent cutting quality. The inclination of the disc is manual from 0° to 90° and the possibility to interpolate the X and Y axes make the machine suitable for repetitive processing and single details even with vertical, inclined, parallel, orthogonal, diagonal and curved cuts. The machines, in the standard version are equipped with a fixed table and can be equipped with a tilting table (option) to facilitate the loading and unloading of the processed pieces
Max Saw Diameter: 700 mm
Maximum Working Length: 3500 mm
Maximum Working Width: 2100 mm
Maximum Working Thickness: 240 mm
Water Consumption: 50 lt/dk
Machine Length: 5500 mm
Machine Width: 3200 mm
Machine Height: 4000 mm
OZKKM 700/500 AQUILA is monobloc bridge sawing machines that, thanks to the advanced functionality, allow every stone fabrication shop to be equipped with accurate and quick machines, without giving up quality. The standard versions of AQUILA 700/500 is monobloc, i.e.: mounted on a monolithic structure of steel carpentry that assures utmost rigidity and stability levels, with no need of any concrete foundation. For this reason, if necessary, they can be easily moved elsewhere. The monobloc configuration can be exploited also for using these machines as “building“ equipment, i.e. it can be placed time by time near the factory where the coating, flooring, etc. are being done.
OZKKM 700/500 AQUILA is the result of the most advanced designing on computer and the massive use of FEM”* analysis in order to reach a very high rigidity level of the bridge and structures. Even though it is a sawing machines, both have technical solutions similar to the ones of a CNC machine. All the movements of the axes are on linear bearings which do not need to be adjusted. All the lubrication points have been gathered in areas which can easily be seen and reached, without disassembling guards or protections for facilitating ordinary maintenance. High level components are employed. The motors used, except for the Z axis, are servo motors with precision reducers. Especially the high speed of the X axis allows to cut down idle times as much as possible with a productivity increase (the percentage of the time that the disc stays on the material is higher with respect to the time for placing or returning to cut start)
The spindle, anchored in front of the beam to offer the utmost rigidity, can accommodate discs up to a diameter of 700 mm for the AQUILA 700, diameter of 500 mm for the AQUILA 500. The head of that machine can rotate “IN CONTINUOUS” i.e. always making the less route for positioning between one cut and another, for the benefit of productivity. Thanks to this peculiarity, it is possible to draw on the X-Y plane circles and circle arches of any size, in all the positions of the working area. The choice of placing the cutting disc in axis with the head rotation center reduces to zero the efforts on the axis for an excellent cutting quality. The inclination of the disc is manual from 0° to 90° and the possibility to interpolate the X and Y axes make the machine suitable for repetitive processing and single details even with vertical, inclined, parallel, orthogonal, diagonal and curved cuts. The machines, in the standard version are equipped with a fixed table and can be equipped with a tilting table (option) to facilitate the loading and unloading of the processed pieces
Technical Data
Parameters |
Unit |
OZKKM 700/500 AQUILA |
Machine height |
mm |
4000 |
Max. workable thickness |
mm |
240 |
Head motor power |
kw |
20 |
Max.length of the cut slab |
mm |
3500 |
Machine width |
mm |
3200 |
C axis blade rotation |
° |
0° to 90° |
Machine length |
mm |
5500 |
Disc diameter |
mm |
700 |
Max.width of the cut slab |
mm |
2100 |
Cooling water requirement(1.5 bar min. pressure) |
L/min |
50 |
Recommended CNC Bridge Cutting Machine Products
Buyers' Request
Lir***Wrote:
hi my freind i have factory to granite and marble for kichen in israel and i want cnc machine you sale to israel?? you can give me catalog and prices for cnc machine ?? you can send me answer in whatsapp thank you
End***Wrote:
I am looking for Cnc Bridge Saw.
Related Products:
Machinery
Factory Machines
Stone Slab Cutting Machines
Cnc Bridge Cutting Machine
Granite Cnc Bridge Cutting Machine
Marble Cnc Bridge Cutting Machine
Limestone Cnc Bridge Cutting Machine
Onyx Cnc Bridge Cutting Machine
Artificial Stone Cnc Bridge Cutting Machine
Basalt Cnc Bridge Cutting Machine
Quartzite Cnc Bridge Cutting Machine
Sandstone Cnc Bridge Cutting Machine
Travertine Cnc Bridge Cutting Machine
Ozteknik Makine Machines