Filter Press Water Treatment Equipment
FOB Price:$2000-40000
2, Programmed arm tie, electrical system controlled, hydraulic system controlled or computer controlled, completely automatic.
3, Hydraulic devices are adopted for pressing and releasing filter plates with maximum pressing pressure of 25 Mpa, and automatic pressure maintaining by using electro connecting pressure gauge.
4, The maximum filtering pressure is 1.5 Mpa to ensure optimum conditions of cake formation and pressure filtration.
5,Simple in operation, safe and labor saving, use buttons on the control panel to control continuous actions, and safe in operation with multiple safety devices.
Parameters |
Unit |
XMK20/800-UB |
Power |
kw |
4 |
Filter capacity |
L/min |
180 |
Height |
mm |
1500 |
Width |
mm |
1100 |
Air supply required |
m3/min |
1 |
Noise lavel |
dB |
55 |
Length |
mm |
3600 |
Weight |
Kg |
2600 |
Mud capacity |
m3/h |
20 |
No. of plates |
pcs |
21 |
Air pressure required |
bar |
6 |
PLC control with Omron software
The liquid passes through the filter cloths on each chamber and is discharged through the filtrate discharge system. The filter medium retains suspended solid particulate. Solids content and remaining water build a cake on the surface of the filter cloth. The slurry is continuously fed under pressure to all chambers. This process continues until cake is compressed to maximum solids concentration. The pump is then shut off; hydraulic pressure is released, and follower plate is retracted. Plates are then separated and cake discharges by gravity into cake disposal container.
Related Products: