If you need our help, we will be glad to help you until you find your products.
Skype: StoneContact.com
WhatsApp/Wechat: +86-17689946988
Clear All
Compare (0/4)
Home ProductsStone MachineryStone Factory MachinesGranite Factory Machines Granite Factory Machines in Italy
Granite Factory Machines in Italy
( 1,021 )Michelangelo: “I saw the angel in the marble and carved until I set him free”. Thanks to the natural stones that come to the factory in large blocks from the quarries, the touch of skilled craftsmen and of course high technology machines, natural stone products that we use and see in our homes and around us emerge. You can see all of these factory machines, polishing, carving, cutting, etc. with their technical details on Stonecontact.com and get in touch with their manufacturers directly.
More Hide
Categories:
Stone Block Cutting Machines (101)
Stone Slab Cutting Machines (202)
Stone Tile Cutting Machines (84)
Stone Surface Processing Machines (75)
Resin Line Machines (37)
Stone Finishing, Profiling Machines (356)
Stone Factory Cleaning Equipments (63)
Stone Handling, Loading Machines (102)
Show More
Suppliers:
-
Add To CompareType: Stone Factory MachinesStone Factory Cleaning EquipmentsAir Dust Collector
FOB Price:
Warranty: 12 Months
Usage: Granite, Marble
Machinery Function Features:
The CS-PLUS Set of cabins in series is created to satisfy the working needs of medium-large processes, with the creation of a single independent area used and specialized in the dust suction and suppression.
They have the characteristic to have a double suppression system (called ” waterfall”) which allows the external capture of heavier dusts, in addition to the suppression system by internal nebulization.
This model sucks and filters the dusts, emitting a purified air outside or inside of own laboratory through particular air diffuser located on the upper side of the plant.
The plant is of high ecological impact thanks to a closed cycle of suppression (limiting the waste of water) and thanks to a low maintenance of sludge unloading from the plant (due to the unloading built inside the foot of the support).
Tecnoporro
Italy
TECNOPORRO s.a.s.
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Finishing, Profiling MachinesCNC Working Center
FOB Price:
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
automatic centralized greased lubrication. In case of anomalies the machine stops;
watertight IP 55 electric cabinet with safety thermostat;
sound power level: 80 ÷ 90 dB(A).
Prussiani
Italy
Prussiani Engineering S.p.A.
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Slab Cutting MachinesCNC Bridge Cutting Machine
FOB Price:
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Travertine
Sassomeccanica
Italy
Sassomeccanica S.p.A.
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Finishing, Profiling MachinesCNC Working Center
FOB Price:
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Numerically controlled machine centre with 3/4 interpolated axis (X-Y-Z), for working of marble, granite and natural stones. The machine is built in electrowelded metal structure that has been treated with polyurethane coatings. It is designed with a “moving bridge” structure and work surface made from rectified solid aluminum plate. The axes movement is driven with brushless motor on precisely tilted racks. The sliding is on linear ball bearing guides.
Especially suitable for drilling, milling, creation of downword stanting planes, polishing of flat surfaces and edges.
Cobalm
Italy
Cobalm srl
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Block Cutting MachinesMulti Wire Saw Machine
FOB Price:
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
BM
Italy
BM Officine Meccaniche S.r.l.
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Slab Cutting MachinesCNC Bridge Cutting Machine
FOB Price:
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Sandstone
Machinery Function Features:
Sawing machine especially suitable for small/medium-sized marble worshops.
Side supports and working head based on spheroidal graphite iron to avoid any vibrations.
The machine's bridge is fixed and the head can be tilted for cuts at a 45° angle, manual depth adjustment (motorized on request). Moreover, the working unit feed is motorized (adjustable speed) and slides on linear guides with rolls, the transmission is achieved by means of an endless screw. The machine is equipped with marine wood working bench.
MGI
Italy
MGI Technology srl
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Surface Processing Machines Slab Polishing Line Machine
FOB Price:
Warranty: 12 Months
Usage: Granite, Marble
Machinery Function Features:
LEVIBRETON KFM
The Levibreton KFM are available in various configurations and with various fittings, and they can operate as individual units or can be integrated into a complete processing plant.
They can be fitted with calibrating spindles or polishing spindles and the number of spindles mounted can vary depending on the Customer’s precise production requirements.
HIGH-POWER AND HIGH-PRECISION CALIBRATING UNITS
The calibrating spindles are mounted to a robust cast iron monolithic structure which practically eliminates vibrations generated when operating even during intensive work cycles.
A recirculating ball screw assembly positions the diamond plate guaranteeing constant precision and performance reliability. This system also automatically raises the spindle in the event the conveyor belt shuts down preventing the diamond tool from excessively machining the workpiece, and then when restarted the spindle automatically returns to its preset machining depth.
The machining depth for each spindle is visualised on a digital display with a precision to hundredths. To guarantee such highprecision machining encoders detect and monitor the position of the spindle rather than the ball screw assembly which moves the spindle.
The recirculating ball screw assembly system adopted for raising the spindle guarantees fast and precise spindle movements without wear, unlike conventional trapezoidal screw systems which in emergency conditions only allow for controlling vertical positioning of the spindle and do not raise and lower spindle.
Dynamically balanced large diameter and dimensioned diamond tools combined with high-powered motors, ensure high-speed machining performance. The diamond are fitted with a removable external crown that allows for quick diamond segment assembly and fitting.
HIGH-PERFORMING HONING-POLISHING UNITS
The honing-polishing units are result of a specific design which has led to achieving:
Greater rigidity and machining performance thanks to
• new design cast iron housings
• increased motor power
Greater reliability thanks to
• new lubrication channels in the shaft bushing
• a new central water feeding system which flows in axis with the spindle, mounted in an elevated position preventing any build-up and deposits.
• new lifting and lowering cylinders with protected rod
Easy maintenance thanks to
• centralised grease nipples on the front of the spindle
• new self-adjusting thrust bearings
• the new system for displaying consumption of abrasive material
Greater and improved safety thanks to
• water feeding in axis with the spindle to avoid any leakage onto the internal components and external water flow deviation system in the event of overfeeding or blockage
• sealed and protected commands
Italy
Breton S.p.A.
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Finishing, Profiling MachinesCNC Working Center
FOB Price:
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
The QUADRIX DG 1000 - 1300 – 1600 - 2000 are large dimension CNC multifunctional work centres with 5/6 interpolated axis with Z stroke from 1000 up to 2000 mm. These models are greatly used for working profiles and shapes of all types, straight, concave, convex, arches, drilling in 2 and 3 dimensional works, columns, sculptures and all types of cutting process.
The Quadrix DG are work centres designed to be very versatile with high production capacities. Thanks to its steel bridge and increased dimensions, to all the movements of each axis given by brushless motors and high precision gearboxes running on linear bearings and gears on both X and Y axis in oil bath, it is possible to produce precise various types of forms, sizes and objects.
The machines work with an electro-spindle controlled by inverter with an ISO 50 connection which can hold discs from 500 mm diam to 1200 mm and diamond tools such as router bits and drill bits to perform a wide range of processing.
The machines can be equipped with lathe and rotating platform controlled by CNC control, so bringing the axis controlled to 6. It is also possible to fit the machine as a bridge saw or as a complete CNC work centre thanks to the wide range of accessories available.
The QUADRIX DG are suited for the customer who wants to grow the company in order to open new doors and projects from an always demanding market of designers and architects.
Donatoni
Italy
Donatoni Macchine Srl
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Finishing, Profiling MachinesEdge Profiling, Polishing Machine
FOB Price:
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Basalt, Quartzite
Machinery Function Features:
At heart of a perfect edge.
Designed and manufactured according to the up-to-date concepts and structural principles, the OMEGA series, automatic multispindle belt polishing machine, is remarkable for its performance and production on every kind of marble and granite. Its complete equipment allows it to perform all the finishing operations on the materials used in the building field, furnishings and monuments. On steps, window sills and other works with thickness from 10 to 60 mm (Omega 60) and from 10 to 100 mm (Omega 100) this machine is able to perform: calibration/gauging, straight edge, bevels, upper groove, lower groove, sloping cuts and their polishing, quirk miters (QM), slot cuts in general, bullnose, edges with regular round shapes (quarter bullnose, half bullnose, etc…). The machine can perform all the processing without the operator manual intervention.
Features
THE EXCLUSIVE FEATURES OF A COMANDULLI MACHINE OMEGA 60
Steel structure, electrowelded, fully worked by milling machine.
All our machines are protected against corrosion through a modern treatment
that follows different phases: sandblasting, metallization and painting The painted covers are subject to cataphoresis treatment, cartes in stainless steel.
Possibility of polishing the edges without the contrast bar, due to the special sliding system of the conveyor belt (a set of idle rollers is under the belt, guiding it in its proper grooves. In this way, the sliding friction becomes rolling friction) and the slab locking – by pneumatic pistons.
Oscillating operation of the edge polishing group by a lever system, original, patented, operated by hydraulic pistons electronically controlled. Oscillating mechanism, placed in its proper boxes, oil bath.
Hydraulic working of the motors for the edge polishing.
Each spindle is independent.
Possibility of polishing straight edges on slabs of different thickness, one after the other.
Water collection tank equipped with two lateral outlets.
New hydraulic unit for substantial energy savings.
Colour touch screen.
Possibility to set the belt speed from control panel.
New program to create and polish conic bevels.
EQUIPMENTS
Here we show you our concept of completeness.
Tilting calibrating spindle assembled on n. 2 orthogonal axes: the vertical one with motorised positioning and keyboard, the horizontal one with manual positioning. Possibility to tilt to 90°. The spindle is arranged to be equipped with shaped wheels to rough irregular profiles.
Automatic pre-cutting bevelling spindles (n. 2).
Series of spindles for the edge, the first with diamond wheel generating the bullnose profile with automatic positioning (n. 6).
Series of bevelling spindles (n. 2).
Spindle for lower / upper groove.
Extendible bar to support pieces of big dimensions.
Rollers for material loading/unloading
OPTIONS
There is always enough room for some further desires.
Possibility to make partial workings with the calibrator or the drip unit (vertcal axis motorised and visualised on the screen).
Vertical spindle to smooth the calibrated strip.
Vertical spindle for bushhammering the slab surface.
Opposite upper groove spindle (double upper groove).
Centralized automatic lubrication system.
Bevelling spindles with possibility of horizontal positioning in addition to the straight edge polishing.
Possibility to polish slabs with minimum thickness 0,5 cm.
NEW DYNAMIC/SMART BELT SPEED FUNCTION: machine equipped with special software that, during the automatic cycle, varies automatically the belt speed to reduce donwtimes according to the kind working and the tools to be utilised.
Comandulli
Italy
Comandulli Costruzioni Meccaniche S.R.L.
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Finishing, Profiling MachinesMosaic Cutting Machine
FOB Price:
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Artificial Stone
Machinery Function Features:
SECO saws have been designed for cutting and chamfering ceramic tiles, marble and stone or stone-like materials for volume production of border tiles and insets of every shape and dimensión. The saws are constructed in sturdy structural steel with resistance welding. The conveyor belt, that slides on a processed surface covered with interchangeable wear-resistant sheet metal, is accurately guided by a device that provides for recovery of worn parts. The spindle headstocks are very compact and precision-processed to ensure the absence of vibrations and excellent cutting accuracy, and are equipped with vertical power adjustment and transversai adjustment for optimum positioning of the disks, that are fitted on special steel sleeves and can be easily and quickiy fitted on the spindles. The machines can be completely operated and equipped by the operator in the front section.
Pragma S.r.l.
Italy
Pragma S.r.l.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Factory Cleaning EquipmentsWater Treatment Equipment
Warranty: 12 Months
Usage: Granite, Marble
Machinery Function Features:
The PCS4 Bags Filter Plants Model has a small and compact structure, ideal for the natural and slow clarification of waste water and small capacity of muds, because it involves a process of materials’ filtration through the use of small filter bags (the use of chemicals substances to accelerate the process is excluded).
It is recommended for water purification with a low percentage of muds.
It has a compact structure in stainless steel AISI-304, complete of two supporting structures for bags, four drainage channels, collection tank and electrical control panel; the structure is customizable for every request and need.
Tecnoporro
Italy
TECNOPORRO s.a.s.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesCNC Working Center
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
automatic centralized greased lubrication. In case of anomalies the machine stops;
watertight IP 55 electric cabinet with safety thermostat;
sound power level: 80 ÷ 90 dB(A).
Prussiani
Italy
Prussiani Engineering S.p.A.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Slab Cutting MachinesCNC Bridge Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Sandstone
Machinery Function Features:
Monoblock bridge saw completely hot galvanized. Linear bearings guides on X and Y axis. Extreme precision. Easy to operate thanks to a touch screen.
Sassomeccanica
Italy
Sassomeccanica S.p.A.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Factory Cleaning EquipmentsWater Treatment Equipment
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite
Machinery Function Features:
The Mini Compact L 3.0 Premium is the compact wastewater treatment plant with extremely high automation and safety features.
Who we designed it for:
> If you want to minimize the intervention of the operator in the management of wastewater.
> If you want to reach high levels of safety.
> If you want to improve your competitiveness by optimizing time, resources and organization.
Features and advantages:
- Single block of only 6 m3 Space saving.
- Integrated clarification and dehydration: Ease of use.
- Automatic and plannable operations: You save time and reduce human error.
- Maintenance reminder service: High performance maintenance.
- Self-maintenance: Minimized operator activities.
- Automatic flocculant preparation and dosing: You save on the costs of chemical agents and eliminate human error.
- Automatic washing of the main accessories in contact with the mud: High plant lifetime.
- The product waste is dehydrated sludge: An always-clean working place.
- 15" touch screen with intuitive software.
- Manual loaded in the control panel.
- Remote control.
- IP55 protection against dust and water jets.
- Free space under the filter press.
- Movement also from below.
- Shipped in two parts: the cylinder and the platform containing all components.
Technical Details:
*Clarified water production: 600 l/min
*Total installed power: 8,5 kW
*Transport space: 6 m on truck or container
*Filter press plates: 8
*Plates dimensions: 300x300 mm
*Pressed sludge production: 1,9 m3/ 8 h
Customizations
*Decanter material: stainless steel or galvanized steel.
*Height: also available lowered (3950 mm).
*Clarified water production: up to 750 l/min.
*Base insulation.
Dal Prete
Italy
Dal Prete Engineering Srl
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Factory Cleaning EquipmentsAir Dust Collector
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
DUST EXTRACTION BENCHES for efficient dust suction
The stone* dust extraction benches represent a very efficient solution for stone fabricator shops.
All our dust benches are made of a sturdy non vibrating metal structure, carefully protected by ceramic and epoxy paint to ensure a long lifetime. The work surface is made up of strong and resistant timber planks.
Features:
High dust suction and suppression power: the combination of a powerful motor, a high pressure fan and state-of-the-art suppression technologies will strongly reduce the amount of dust in your laboratory.
Immediately operational and user-friendly: the installation does not require masonry works, just connect to the needed electrical, water or pneumatic supplies (according to the model).
Reduced maintenance: Except the fan, Ghines dust extraction benches do not have pumps, filters or mechanically moving parts, which reduces maintenance to a minimum and which guarantees also intensive use in the long term.
XAGUA is a water-system suction bench for air cleaning, it uses the water to wet the stone* dust and ceramic dust
How does it work?
An impressive suction effect all over the perimeter of the XAGUA guides the stone* dust effectively inside the machine, where it is captured by nebulized water drops. The created air flow is forced several times to change direction and the centrifugal forces abate the muddy particles into the tank. Drop separators with lamellar structure inside the dust extraction bench retain the humidity inside. The continuous water overflow takes out the dirty water from the bench.
The compact and sturdy metal structure, protected by ceramic and epoxy paint, together with galvanized steel plates and the pvc drop separators assure a low sound pressure and the investment in the long term.
* some limitation on materials may apply, depending by your country. Please contact us for more information
Ghines
Italy
Ghines Group Srl
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Factory Cleaning EquipmentsWater Treatment Equipment
Warranty: 12 Months
Usage: Granite, Marble
Machinery Function Features:
The PCS1-A Bags Filter Plant Model is the high version with silos for muds decantation, Silos base structure, flocculant dosing system, pneumatic unloading system in mobile structures with filtering big-bags.
This model is ideal for waste water and muds’s clarification and filtration for small and big capacity because it involves a double process of materials’ filtration thanks to:
1) A Decantation system (various sizes and capacities Silos) which makes a natural separation between mud and water through an internal process;
2) A Flocculant system (optional for every need) a chemical substance that accelerates the process of detachment and isolation of the mud from water.
It has a compact structure with Silos in stainless steel AISI- 304/316 and the remaining iron structures with heavy galvanized carpentry; the entire plant is customizable for every request and need by an individual design.
The plant is of high ecological impact thanks to an high purification for each types of sludge, by a low maintenance because the only manual operations of the operator concerns the sludge unloading (with pneumatic lever system placed near to the control panel) and the movement of big-bags structures.
Tecnoporro
Italy
TECNOPORRO s.a.s.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Surface Processing Machines Slab Polishing Line Machine
Warranty: 12 Months
Usage: Granite, Marble
Machinery Function Features:
LEVIBRETON KFM
The Levibreton KFM are available in various configurations and with various fittings, and they can operate as individual units or can be integrated into a complete processing plant.
They can be fitted with calibrating spindles or polishing spindles and the number of spindles mounted can vary depending on the Customer’s precise production requirements.
HIGH-POWER AND HIGH-PRECISION CALIBRATING UNITS
The calibrating spindles are mounted to a robust cast iron monolithic structure which practically eliminates vibrations generated when operating even during intensive work cycles.
A recirculating ball screw assembly positions the diamond plate guaranteeing constant precision and performance reliability. This system also automatically raises the spindle in the event the conveyor belt shuts down preventing the diamond tool from excessively machining the workpiece, and then when restarted the spindle automatically returns to its preset machining depth.
The machining depth for each spindle is visualised on a digital display with a precision to hundredths. To guarantee such highprecision machining encoders detect and monitor the position of the spindle rather than the ball screw assembly which moves the spindle.
The recirculating ball screw assembly system adopted for raising the spindle guarantees fast and precise spindle movements without wear, unlike conventional trapezoidal screw systems which in emergency conditions only allow for controlling vertical positioning of the spindle and do not raise and lower spindle.
Dynamically balanced large diameter and dimensioned diamond tools combined with high-powered motors, ensure high-speed machining performance. The diamond are fitted with a removable external crown that allows for quick diamond segment assembly and fitting.
HIGH-PERFORMING HONING-POLISHING UNITS
The honing-polishing units are result of a specific design which has led to achieving:
Greater rigidity and machining performance thanks to
• new design cast iron housings
• increased motor power
Greater reliability thanks to
• new lubrication channels in the shaft bushing
• a new central water feeding system which flows in axis with the spindle, mounted in an elevated position preventing any build-up and deposits.
• new lifting and lowering cylinders with protected rod
Easy maintenance thanks to
• centralised grease nipples on the front of the spindle
• new self-adjusting thrust bearings
• the new system for displaying consumption of abrasive material
Greater and improved safety thanks to
• water feeding in axis with the spindle to avoid any leakage onto the internal components and external water flow deviation system in the event of overfeeding or blockage
• sealed and protected commands
Italy
Breton S.p.A.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Block Cutting MachinesSingle Wire Block Squaring Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
DF 2000-2500-3000-3500 Single wire saw for dressing blocks and cutting slabs
TOP INVERTER OR FIXED WIRE SPEED
Single wire saw for dressing blocks and cutting slabs. Has two main flywheels of large diameter (250 or 200 cm as to the maximum cutting height needed) to maximise the cutting speed and the life of the damond wire. The wire tensioning system is hydraulic.
Stiff metallic structure can carry flywheels of diameter either 2000 or 2500 mm.
Electronic drop speed control. The machine uses only two large flywheels (diameter 2000 or 2500 mm) thus reducing wire fatigue. The switchboard is separate from the machine, and includes a number of safety devices with segnalations of eventual anomalies of the cut. Diamond wire tensioning uses one of the two flywheels thanks to an hydraulic piston.
The TOP version has an inverter to adapt the wire speed to the type of stone to be cut. The basic machine has fixed wire speed, set for the material to cut
Pellegrini
Italy
Pellegrini Meccanica SpA
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesCNC Working Center
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Numerically controlled machine centre with 5 interpolated axis, for working of marble, granite and natural stones. The machine is built in electrowelded metal structure, completely hot gavanized. Side walls galvanized and treated with polyurethane coatings. It is designed with a “moving bridge” structure and the work surface made from rectified solid aluminum plates.
The axis movement is driven with brushless motor on precisely tilted racks. The sliding is on linear ball bearing guides.
Bi-rotary heads with vector handling and equipped with powerful motor spindle. Powerful three-dimensional software for the creation of artistic works using the contemporary/interpolated movement across the 5 axes.
Especially suitable for drilling, milling, recess, artistic works on solid block, polishing of flat surfaces and edges.
Cobalm
Italy
Cobalm srl
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesCNC Working Center
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Combined CUT&JET machines, equipped with electro-spindle for diamond blades and high pressure waterjet and abrasive, are designed and built to merge the cutting speed of the blade, the versatility of the waterjet and the efficiency of the CUT & MOVE.
Powered by a numerical control interfaced with CAD/CAM systems, they are divided in:
Combined machines CUT&JET 4 axis;
Combined machines CUT&JET 5 axis;
Whether for the production of unique pieces or for serial production combined CUT&JET machines allow endless shapes of cuttings and cut-outs.
automatic centralized greased lubrication. In case of anomalies the machine stops;
watertight IP 55 electric cabinet with safety thermostat;
sound power level: 80 ÷ 90 dB(A).
Prussiani
Italy
Prussiani Engineering S.p.A.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesEdge Profiling, Polishing Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Sandstone
Machinery Function Features:
FLYING FLAT Full hot galvanized vertical edge polishing machine for flat edge and bevels
Whether you need to polish the edge of kitchen tops or wall claddings, there’s FLYING FLAT. A manually programmable edge polisher, equipped with patented devices to give you a superior productivity.
Productivity significantly higher, compared to machines of the same category, even while using standard tools, thanks to specific patented devices..
Mechanical parts totally accessible thanks to large pneumatic opening doors.
Each spindle is equipped with an indipendent motor with completely waterproof encapsulated bearings.
Sassomeccanica
Italy
Sassomeccanica S.p.A.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Slab Cutting MachinesCNC Bridge Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Sandstone
Machinery Function Features:
Sawing machine especially suitable for small/medium-sized marble worshops.
Side supports and working head based on spheroidal graphite iron to avoid any vibrations.
The machine's bridge is fixed and the head can be tilted for cuts at a 45° angle, manual depth adjustment (motorized on request). Moreover, the working unit feed is motorized (adjustable speed) and slides on linear guides with rolls, the transmission is achieved by means of an endless screw. The machine is equipped with marine wood working bench.
MGI
Italy
MGI Technology srl
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Factory Cleaning EquipmentsWater Treatment Equipment
Warranty: 12 Months
Usage: Granite, Marble
Machinery Function Features:
The PCS1-B Bags Filter Plant Model is the low version with silos for muds decantation, compressed air pump, flocculant dosing system, pneumatic unloading system in mobile structures with filtering big-bags, compared to the model PCS1-A, this model allows a planning of a purification plant also in smaller and constrained space by reduced height.
This model is ideal for waste water and muds’s clarification and filtration for small and big capacity because it involves a double process of materials’ filtration thanks to:
1) A Decantation system (various sizes and capacities Silos) which makes a natural separation between mud and water through an internal process;
2) A Flocculant system (optional for every need) a chemical substance that accelerates the process of detachment and isolation of the mud from water.
It has a compact structure with Silos in stainless steel AISI- 304/316 and the remaining iron structures with heavy galvanized carpentry; the entire plant is customizable for every request and need by an individual design.
The plant is of high ecological impact thanks to an high purification for each types of sludge, by a low maintenance because the only manual operations of the operator concerns the sludge unloading (with pneumatic lever system placed near to the control panel) and the movement of big-bags structures.
Tecnoporro
Italy
TECNOPORRO s.a.s.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Surface Processing Machines Arm Polishing Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Sandstone
Machinery Function Features:
The machine described above is provided on request to:
a) Workbench motorized tilting.
b) Swivel joint for polishing plans convex and concave.
Machine is supplied as above descripted of:
a) Reclinable motorized workbench.
b) Articulated joint to polish concave and convex surplace. -
Add To Compare
Type: Stone Factory MachinesStone Block Cutting MachinesMulti Wire Saw Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
The multiwire machine of BM, the KODIAK EVOLUTION, is suitable for cutting granite blocks into slabs of various thickness. It is made in different size models, in order to install from 20 up to 84 diamond wires. The machine is exclusively constructed on 4 columns, guaranteeing the best stability and cutting precision. The machine can install diamond wires of diameter 7,3 mm, 6,3 mm and 5,3 mm. The tensioning of the wires is by a BM’s patented system, which guarantee the homogeneous independent tensioning of each diamond wire. The “triangle” structure allows the diamond wire to work only on 3 touching points, reducing to the minimum the stress of the wire during the work. The bigger diameters of the rollers and wheels, reduce the inclination angle of the diamond wire, extending so the life of the wire
BM
Italy
BM Officine Meccaniche S.r.l.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Block Cutting MachinesSingle Wire Block Squaring Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Single wire saw for dressing blocks and cutting slabs; similar to the above wire saw but fitted with a fully electronic control and tensioning system and with a PLC for automatic slabbing.
Metallic structure is similar to DF TOP but the system is controlled by a Telemecanique PLC for full automatic control of all machine functions during operation. The switchboard is separate from the machine, and includes a number of safety devices to signal any cutting anomalies. Electronic drop speed control based on the adjustable maximum wire bow during cutting. Automatic slabbing is provided, and inclined and horizontal cutting can be done with the addition of two pairs of wire guide-wheels. Diamond wire tensioning uses one of the two flywheels with an electric actuator for positioning
Pellegrini
Italy
Pellegrini Meccanica SpA
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesCNC Working Center
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
KRONOS is a 5/6 axis interpolated milling/work center machine with automatic tool change. It is available in the version with a Z axis stroke of 600 mm or with a Z axis stroke of 800 mm.
It is one of a kind machine as it combines the typical features of a milling cutter and those of a work center/contouring machine. The Parametrix software and the wooden overbench, allow to perform cutting operations as a traditional milling cutter; the KRONOS range, compared to the traditional working centers, is the sole solution offering specific software for simple and intuitive cutting. Without the overbench, the machine can be set up as a work center to process the piece directly on the aluminum bench or as a contouring machine, fixing the piece to the bench with the suctions cups kit supplied with the machine.
The machine allows to produce items with extremely precise finishing, thanks to the sliding system of X and Y axes on linear guides and racks both in oil bath lubrication. The motion is given by brushless motors coupled to high precision gearboxes. It is equipped with a series of electro-spindles controlled by inverter and it can be fitted with ISO 40 type connection diamond tools, such as end mill, milling wheel and a horizontal blade.
KRONOS is featured as a millling cutter and a work / contouring center, it is particularly suitable for all laboratories that want to increase their technological level in limited spaces.
Donatoni
Italy
Donatoni Macchine Srl
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesEdge Profiling, Polishing Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Quartzite, Sandstone, Travertine
Machinery Function Features:
Edgepolisher model MUSA 7+4, working direction : from RIGHT to left.
Equipped with:
-Nr 7 spindles to polish the edge
-Nr 4 spindles to polish the bevels (2 upper and 2 lower)
-Nr 1 Cutting unit, manual rise and descent, manually tilting at 45°
-Manual support bar and infeed / outfeed roller tables
Machine ready from stock.
Comandulli
Italy
Comandulli Costruzioni Meccaniche S.R.L.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesMosaic Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Artificial Stone
Machinery Function Features:
FRANGO SPICO chipping unit allows the chipping of the upper corners of marble tiles, ceramic terracotta and fine porcelain stoneware by using particular tools. It is possible to obtain different final aesthetic results, each one of which is characterized by deep ageing effects, which can be further adjusted by additional operations such as tumbling, satin-finishing or others.
The single machine or the complete line are characterized by simple maintenance and absence of noises during the working phases, still guaranteeing a high productivity
Pragma S.r.l.
Italy
Pragma S.r.l.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Factory Cleaning EquipmentsAir Dust Collector
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite
Machinery Function Features:
Without doubt, the XAERO is one of the most innovative dust suction benches, equipped with a high-pressure fan of 5.5 kW.
It combines two different dry operating systems, a physical and a mechanical one:
10 cyclones abate most of the captured stone dust, they are maintenance free and do not wear out.
The remaining dust particles pass through dry filter cartridges as a further step of the abatement. Every time the bench is switched off, a series of very strong compressed air blasts clean automatically the filters and deposit the dust particles in a drawer underneath. A cleaning cycle can be activated manually at any time, too.
WHAT WILL YOU LOVE IN THIS SUCTION BENCH?
The very strong suction power of the dust extraction bench XAERO is equally distributed all over the work surface and its perimeter. Additionally, it is possible to lift two planks of the wooden surface to capture effectively all the dust produced by disc cutting.
Easily accessible drawers collect the dust which is suppressed by the cyclones and the filters and allow to do maintenance in a few minutes without polluting the environment.
The engine compartment is sound proof.
The suction unit can be separated from the work bench and can be placed in an adjacent room or outside, thus gaining more space in the work shop.
Ghines
Italy
Ghines Group Srl
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesCNC Working Center
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
automatic centralized greased lubrication. In case of anomalies the machine stops;
watertight IP 55 electric cabinet with safety thermostat;
sound power level: 80 ÷ 90 dB(A).
Prussiani
Italy
Prussiani Engineering S.p.A.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Slab Cutting MachinesCNC Bridge Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Built for those who produce tops and not just that.
To cut in any direction and inclination, profile roughing and finishing with shoulder or blade.
1 One-piece--Particularly compact and sturdy machine, thanks to its one-piece structure, completely hot dip galvanised
2 Versatile and powerful --Thanks to its 5 axis, the machine can quickly make straight, oblique or curved cuts, polish profiles (including curved ones), make incisions and bas-relief (optional)
3 Easy to use-- Thanks to the touch screen PC and the SASSO software, the machine is very easy to program, and can even generate cutting programs by itself, using the dxf files for kitchen tops and 2D. A 5-axis that anyone can use.
compact monobloc CNC bridge saw with 5 interpolated axes completely hot galvanized
• User friendly touch screen for a fast and easy programming.
• Recirculating ball bearing linear guides, brushless motors and reduced backlash reducers to grant cutting accuracy and speed.
• Ability to execute cuts in any direction, curved, inclined at 45° and at any degree from 0° to 90°.
• Ability to execute profiles by means of cuts, profile roughing and finishing with the blade shoulder.
• Ability to read and execute cuts from CAD (optional) with .dxf files.
Unique ability to minimize the extra cuts thank to the Sasso’s new technology “PLUNGE CUT”.
Sassomeccanica
Italy
Sassomeccanica S.p.A.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Factory Cleaning EquipmentsWater Treatment Equipment
Warranty: 12 Months
Usage: Granite, Marble
Machinery Function Features:
The PC Filter Press is designed for short-term muds dehydration, separating solids and forming dry and compact panels with a maximum residual humidity of 20%.
We produce different models, from 5 to 12 compressed plates (size 500 × 500 mm), according to each individual need required.
Based on the required capacities, to the plant is integrated a decanting system (silos) suitable to the plant, flocculant system, extra muds mixer, in addition to all the necessary components for the regular operation.
It has a compact structure with Silos in stainless steel AISI-304/316, and the remaining iron structures with heavy galvanized carpentry; the entire plant is customizable for every request and need by an individual design.
The plant is of high ecological impact thanks to an high purification for each types of muds, by a low maintenance.
Tecnoporro
Italy
TECNOPORRO s.a.s.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesLeveling Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
End milling machine for cutting slabs in marble, granite, and porcelain stoneware, with idle rollers to support the material, one side stop and one longitudinal stop, laser cutting marker and set of service wrenches.
CompactLine
Italy
Ferrari & Cigarini SRL
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesResin Line MachinesAutomatic Filling-Resining Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
The cyclic store is characterized by the fact that all of the slabs being processed, placed on special frames, follow the same run and, finally, undergo the same thermal treatment.
Another advantage in terms of uniformity of the treatment that the slabs undergo, is generated by the fact that the frames form two columns, one moving up and one moving down. This construction feature allows for the use of two separate thermal units that collide the two columns with hot air from opposite sides.
Another important characteristic is the extremely reduced cycle time that allows for use in plants of an extremely high level of production.
The cyclic stores are available for capacities of 40, 60, 80 or 100 frames and cover a length equivalent to half of the corresponding static machines allowing for localization of high production plants in limited spaces.
MAIN FEATURES
Complete drying and correct oven curing process
Thanks to the perfect air propagation system, together with the subdivision of the oven in two separately rooms
High working capacity: from 30 slabs/hour to 70 slabs/hour
Thanks to the versions: Cyclic Line 40/60, Cyclic Line 40/80, Cyclic Line 60/80, Cyclic Line 60/100 and Cyclic Line 80/100
Material directly loading onto tray and the possibility of “book match”
Reduced size in relation to the high working capacity
High speed and working efficency
Prometec
Italy
Prometec s.r.l.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Block Cutting MachinesSingle Wire Block Squaring Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Single wire saw for dressing blocks, but fitted with a 2-axis CNC system that enables cutting of two-dimension profiles as well as slabbing.
Machine shows all the characteristics of DF PLUS and in addition: capability to cut profiles thanks to a 2-axis CNC system, and to the two pairs of guidewheels that can be rotated electrically round the wire; programming is very easy using either the machine keyboard and monitor, or on an office PC for which we provide an extra copy of the Software; diamond wire tensioning uses one of the two flywheels with a servomotor driven actuator to position the tensioning wheel.
Pellegrini
Italy
Pellegrini Meccanica SpA
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Factory Cleaning EquipmentsWater Treatment Equipment
Warranty: 12 Months
Usage: Granite, Marble
Machinery Function Features:
The PC Filter Press is designed for short-term muds dehydration, separating solids and forming dry and compact panels with a maximum residual humidity of 20%.
We produce different models, from 5 to 12 compressed plates (size 500 × 500 mm), according to each individual need required.
Based on the required capacities, to the plant is integrated a decanting system (silos) suitable to the plant, flocculant system, extra muds mixer, in addition to all the necessary components for the regular operation.
It has a compact structure with Silos in stainless steel AISI-304/316, and the remaining iron structures with heavy galvanized carpentry; the entire plant is customizable for every request and need by an individual design.
The plant is of high ecological impact thanks to an high purification for each types of muds, by a low maintenance.
Tecnoporro
Italy
TECNOPORRO s.a.s.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesEdge Profiling, Polishing Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone
Machinery Function Features:
Versatility becomes eight
Work at full speed, with FLAT 8.4. Eight spindles polish flat edges at a speed that you can’t even imagine. FLAT 8.4 is the ideal solution for various and large working needs.
1 Hot dip galvanisation
Ensures the benches will last through time
2 High performance even on bigger thickness
Thanks to the 8 heads for polishing and slewing, the machine can easily work pieces up to 10 cm thick, achieving high speeds
3 Versatile and complete
The machine can be supplied with a multi-purpose spindle for special workings and up to 6 bevels, for added versatility
Eight spindles polish flat edges at a speed that you can’t even imagine
Sassomeccanica
Italy
Sassomeccanica S.p.A.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesCNC Working Center
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
automatic centralized greased lubrication. In case of anomalies the machine stops;
watertight IP 55 electric cabinet with safety thermostat;
sound power level: 80 ÷ 90 dB(A).
Prussiani
Italy
Prussiani Engineering S.p.A.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Slab Cutting MachinesCNC Bridge Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Sandstone
MGI
Italy
MGI Technology srl
Contact Supplier
Have a Question? Ask our expert
Ask now
Hot Product
