Quartzite Finishing, Profiling Machines in Australia

The cantilever-type cutting table consists of the transmission part with the X axis, Y axis and Z axis, water tank, cutting head, lubrication part and servo driving system. Cantilever mechanical structure is fit to small size machines, a short-running distance of X and Y axis, suitable for processing a variety of complex small parts.
Features:
The cutting table consists of a transmission part with X axis Y axis and Z axis, water tank, cutting head, lubrication part and servo driving system. Cantilever mechanical structure is fit to small size machines, a short running distance of X and Y axis, simple structure, suitable for processing a variety of complex small parts.
Product information:
SAME® cantilever type waterjet cutting machine is available in many sizes (1600mm x 1600mm, 2500mm x 1600mm, 3000mm x 2000mm, 4000mm x 2000mm, etc. Customized service is available.)
● Travel of Z axis: 150mm
● Servo system: YASKAWA, JAPAN
● Cutting accuracy: ±0.1mm
● Control accuracy: ±0.01mm
● Re-positioning accuracy: ±0.025mm/m
● Max. moving speed: 6000mm/min
Waterjet cutting machine is popular in metal cutting industry, glass cutting industry, stone cutting industry, fiber cutting industry.

The ALEXIA automates the cutting, drilling and polishing of sink cutouts and is the ultimate answer to affordable stone processing without compromising on quality. The machine has automatic tool changing with 23 stations.
The Best feature of the ALEXIA is its user-friendly interface, the Software has been designed for MS Windows and is intuitive and simple to use. It is pre-loaded with common sink templates listed by brands including Oliveri, Franke, Clark and Blanco. Further other sinks sizes and shapes can be easily created using the parametric section extending the machine's cutting capabilities.
The ALEXIA has the ability to connect directly to the internet which allows our office to log into your machine and help you with further training and troubleshooting. Another key feature is its small footprint taking up minimal area in the workshop.
Flat drain boards can be programmed in relation to the sink cut-outs selected. The length, width and radii adjusted relatively to the chosen sink cut out as well as the depth of recess.
Inclined drain grooves can be cut either onto the bench top or incorporated into the polished flat drain board. The width of the grooves are dictated by the tooling selected. The length is inputted on 'grooving' selections and is in relation to and in proportion with, the centre of the sink cut out.
In addition to this the Alexia can also perform edge profile work ( eg. Lambstongue, bullnose etc.) subject to tools selected .These can be supplied at additional cost to standard tooling provided.
The Team at Farnese Australia understands that buying stone machinery is an important decision, one that can be extremely costly when breakdowns occur and equipment doesn't run to its capability. That's why we provide our customers with unparalleled service and support for all our machines throughout Australia and New Zealand. From on-site installation and training to after-sales telephone and in person support and repairs, our professional sale and service team will keep your valuable asset running.

The MULTIFLAT is based on our world renowned MITRE SAW, utilising a multi polishing heads instead of the 45 degree blade arrangement to flat polish only. A simple PLC program memorizes the number of times the head moves back and forth to enable the polishing. Each program represents a diamond, stone or polishing pad to be used. In most cases a three step process is sufficient to polish most engineered and natural stone available on the market.
The machine has pneumatic pop up rollers, for ease of loading and unloading operated by a simple flick of a lever. Also operated by a lever are five pneumatic clamping feet which are there to secure the job to the table. An outrigger roller table is there to support longer pieces, which can be manually moved along the whole working area of the machine and simply clipped on. The machine has a pneumatic front stop so the work piece is positioned in the exact place for the polishing to proceed, this can be lowered and raised with a button on the main control panel.
Water is fed down the centre of the polishing spindle via an electric solenoid that turns on and off with the spindle motor to reduce waste. The polishing heads can be quickly changed as the machine utilizes a 100mm snail lock coupling. All universal tooling using this form of coupling may be used and each individual stone or pad is programmable on the PLC for future reference. At FARNESE we feel that after the MITRE SAW this would be the next machine to prove invaluable in the modern work shop.

The MSQ8 square edge polishing machine is designed specifically to create square edges and square arris edges for kitchen benchtops. This will be a useful addition for all stone masonry businesses.
Features:
• Powerful machine specifically designed for polishing kitchen benchtops
• Majority of polished edging is Arris so this machine is a useful addition to
other stonework machinery.
• Can polish up to 30m per hour and up to maximum length of 3.2 metres
• Adjustable diamond grinding head
• 20mm-60mm squared polishing (6 polishing heads)
• Arris polishing (2 polishing heads)
• Mitre Cutting Optional
• Manually crank lever for oil supply to all tracking and polishing heads.
• Auto water supply. No need for control valve.
• Recycled water usage
• Guard railing for alignment of stone to polisher
• Adjustable turntable for easy movement of stone especially island benchtops
• Adjustable pressure airlocks for keeping stone in place while polishing.
Can be used for all types of stone.
• Machine size specification approximately 6 metres x 1.8 metres