2022-05-18 22:12:30
Match Your Image Post Your Needs

Stone Finishing, Profiling Machines

( 937 )
Suppliers:
  • 5-axis Machining center and Bridge saw
    favorites
    Add To Compare

    Type: Factory MachinesStone Finishing, Profiling MachinesCNC Working Center

    FOB Price:

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Onyx, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    Helios Five is an extremely precise 5-axis machining center and bridge saw (6 axis with the lathe), with automatic tool change and magazine, that can be extended according to specific needs. The possible configurations make the machine suitable for the execution of important works, from roughing to finishing, with highly detailed results. The precision of the Helios Five allows to achieve the greatest part of the stone processes possible, such as small and large sculptures and statues, kitchen tops with profiling and edge polishing, drain boards and much more. This feature makes Helios Five unique in its category.



    As a bridge saw, the machine can work with disks with diameters of up to 725 mm. Thanks to its imposing structure and the technology developed by Helios. Helios Five can process all types of cut with extreme precision (45° angled cuts, shaped cuts, arches cuts angled on both sides etc…)



    Helios Five can have the Z stroke of 680, 1000 or 1200 mm and can be equipped with the interpolated lathe, thus increasing the executable machining in the stone sector.



    Stainless steel structure: Thanks to the stainless steel structure, Helios Five is a sturdy machine, that preserves its quality over the time;



    Precision and reliability: The use of recirculating ball screws and zero backlash gears makes the machine’s movements extremely precise, thus producing highly detailed works;



    High frequency inverter: Thanks to the use of high frequency inverter, that provides only the necessary power for the mechanical efficiency, there are no wastes of energy, and the maximum energy saving is guaranteed;



    Security doors: The security doors have got a manual sliding system with automatic machine stopping sensor in case of opening;



    Laser marker: The device shows in advance the passage of the disk, indicating the correct position of the cut;



    Aluminium rectified table: The aluminium rectified table guarantees the integrity of the table and a total resistance to the processes stress and to corrosion. The

    calibration, performed directly by the machining center, ensures the perfect flatness of the support surface. The rectified table and the separated slats offer the

    possibility to set the pieces easily;



    Tilting table: The tilting table, with the Easy-load solution, ensures the loading of any type of slab with the minimal effort;



    Automatic tool change and tools magazine: Helios Five with automatic tool change manages all the machining center functions. The magazine, containing several tools ensures the maximum versatility in the tools choice. Its capacity can be modified according to specific needs.
  • CNC Working Center stone processing machinery, stone cnc router to engrave marble glass
    favorites
    Add To Compare

    Type: Factory MachinesStone Finishing, Profiling MachinesCNC Working Center

    FOB Price:$17200-26700

    Warranty: 12 Months

    Usage: Granite, Marble, Slate, Artificial Stone, Quartzite

    Machinery Function Features:

    * By automatically changing tools, many processes can be completed, such as polishing of the back splash, abnormal edges of the front edge, cutting and polishing of the tap hole.
    * Quartz processing centers are widely used in artificial stone, quartz countertops and sinks
    * This machine can meet the processing requirements of cutting, edging, polishing and engraving of different materials
  • CNC 5-Axis Water Jet Machine, Waterjet Cutting Machine
    favorites
    Add To Compare

    Type: Factory MachinesStone Finishing, Profiling MachinesWaterjet Machines

    FOB Price:$32000-38000

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    With the support of five axis CNC system, the machine coordinates X, Y, Z and A, B rotation axes at the same time, so that the water jet cutting head can swing in any direction. When cutting, the computer calculates the material density and thickness of the workpiece in real time, and controls the cutter head to run along the cutting track, so as to realize the three-dimensional cutting of the workpiece with complex shape, such as cutting inclined plane, chamfering, and cutting high-precision conic surface, arc surface and other complex space surfaces. So that the water knife to achieve higher performance and bring better benefits to users.
    Cutting advantages:
    1. Strong versatility, almost all materials can be cut.
    2. The water jet is cold cutting, which does not produce thermal effect, deformation, slag, ablation and change the physical and chemical properties of materials.
    3. Small slotting and cooling cutting can improve material utilization.
    4. The cutting medium is only water and natural abrasive, and no other substances are produced in the cutting process. It is a clean and environmental protection cutting process.
    5. After cutting, the cutting surface is neat and smooth, and there will be no damage to the cut object in the cutting process, which can play a role in many cutting operations that cannot be realized by cutting tools.
    Water jet has a wide range of applications, from metal materials to non-metal materials, from natural materials to artificial materials, from food to daily necessities, basically can cut, has the "universal cutting machine" reputation.
    Machinable materials:
    Water knife is known as "universal cutting machine", which can cut almost any kind of material, such as steel, alloy, stone, ceramics, ceramic tiles, glass, aluminum, and other materials. Of course, some materials that can't be cut for their own reasons, such as tempered glass.
    The main application fields are as follows:
    1. Ceramic, stone and other building materials processing;
    2. Glass products processing, such as home electrical products in glass parts cutting, building decoration, process glass;
    3. Metal plate cutting and blanking in machinery industry;
    4. Advertising industry signs, art pattern cutting
  • Stone cnc router, large stone granite marble carving machine
    favorites
    Add To Compare

    Type: Factory MachinesStone Finishing, Profiling MachinesStone Carving,Engraving Machine

    FOB Price:$17000-25000

    Warranty: 12 Months

    Usage: Granite, Marble, Slate, Artificial Stone, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    Compared with other stone marble engraving machine, this ATC 3D CNC machine was designed with carousel automatic tool changer. Different knives can be installed in tool holder, the working efficiency can be greatly promoted.
  • Automatic Drilling Machine For Undercut Anchors
    favorites
    Add To Compare

    Type: Factory MachinesStone Finishing, Profiling MachinesStone Drilling, Slot Machine

    FOB Price:$6500-7000

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    Automatic Drilling Machine for Undercut Anchors  
    Equipment introduction:Applicable for stone panels, concrete panels,ceramic plates,and other cladding panels. Such as granite, marble, travertine, sand stone, crystal glass, quarz, ceramic, etc. 
    Equipment features:
    ·Easy to operate
    ·Single die
    ·Automatic drill 
    Equipment configurations:
    ·Stainless steel frame, assembled with aqua storage tank and desk universal roller
    ·Electric control system
    ·Stone positioning system
    ·Plates can be adjusted in both X, Y directions
    ·Automatic drill technique of water cooling diamond
    ·Clear plate surface with water spraying·Checking tool of pore forming 

    Technical characteristics:Automatic air supply system, Automatic circulating water system, Drilling positioning system, Drill compensation regulation system. 

    Equipment parameters:
    1.Voltage: 380v.
    2.Motor power: 2.2KW .
    3.Air pressure: 0.6 Mpa.
    4.Water pressure: 0.15 Mpa.
    Specification: 1900*1650*1550mm. 
    Drilling parameters:
    1.Max hole depth:40mm.
    2.Min spacing: 150mm.
    3.Max plate width: 1200mm.
    4.Max plate length: 1800mm.
    5.Min plate thickness: 12mm. 
    Precision of drilling position:about 1mm.
  •  1325 Stone CNC Machine for marble , granite,Stone carving machine, CNC Router
    favorites
    Add To Compare

    Type: Factory MachinesStone Finishing, Profiling MachinesStone Carving,Engraving Machine

    FOB Price:$4000-7000

    Warranty: 12 Months

    Usage: Granite, Marble, Slate, Artificial Stone, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    1.The machine's body of 1325 stone cutting machineis with hard steel structure,strong,rigid,high precision,realiable and durable.
    2.High-performance driver motor to ensure that the machines high speed and accuracy.
    3.Imported high-precision ball screw gap,smooth movement,to ensure the machine tools high precision.
    4.Designer perfectly,selecting the best machine accessories to minimize the failure rate preferred.
    5.Unique data backup function allows continuing processing after tool breakage,power failure or interruption of the program.
  • HLDH Multi Calibrating Machine Granite&Marble Process
    favorites
    Add To Compare

    Type: Factory MachinesStone Finishing, Profiling MachinesCalibrating Machine

    FOB Price:$20000-80000

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    The machine is mainly used for thick processing such as stone plate and its surface processing, which can effectively eliminate the knife mark and avoid the wavy surface of the plate. The finished product has high flatness and uniform thickness, and can be combined with an automatic mill to form a pipeline.
  • Cnc Router - Bridge Saw - Countertops Machine
    favorites
    Add To Compare

    Type: Factory MachinesStone Finishing, Profiling MachinesCNC Working Center

    FOB Price:

    Warranty: 12 Months

    Usage: Granite, Marble, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    The new range of Integrated Linear Systems 4.0, full automation of the process
    LINEAR INTEGRATED SYSTEM 4.0 PROJECT #1
    · CNC BRIDGE SAW WITH SLAB HANDLING SYSTEM AND CONVEYOR BELT
    · MACHINING CENTER WITH SLAB HANDLING AND CONVEYOR BELT
    The Integrated Linear Systems 4.0 support the evolution of your stone workshop to the new frontiers of the so-called INDUSTRY 4.0.
    If you are in the process of buying a new saw or a machining center, please contact us, we would be more than glad to develop your own automated solution!
    These Systems have been conceived for easy integration in your production cycle. Our experience in mechanics and software allows us to find the most suitable solution for your company.
  •  Stone CNC router, Stone carving machine for marble,granite
    favorites
    Add To Compare

    Type: Factory MachinesStone Finishing, Profiling MachinesStone Carving,Engraving Machine

    FOB Price:$6000-8600

    Warranty: 12 Months

    Usage: Granite, Marble, Slate, Artificial Stone, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    1. Strong power acquired by water cooling spindle 5.5kw, and customized sink work table is just right for stone, granite etc processing;
    2. Dust proof design on X and Y axis do you favor on machine maintenance;
    3. Removable rotary device just for your option, in case that you need to process cylinder objects;
  • Vertical Machining center
    favorites
    Add To Compare

    Type: Factory MachinesStone Finishing, Profiling MachinesCNC Working Center

    FOB Price:

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone

    Machinery Function Features:

    The machining centers from the Helios Star series are powerful and fast, they differ from the traditional anthropomorphic robots for their precision and reliability. The tower structure allows a vertical process of pieces from different size and big blocks, which are easily clamped on a turning table with slats. Helios Star can manage all the 360° processes possible such as statues, capitals, columns, portals, as well as processes of milling, sculpturing, engraving, and writing. Moreover, thanks to the optional lathe, it is possible to make horizontal turning processes with disk and tool. The integrated Helios Galaxy Stone software makes its use easy and fast, it is ideal for design, rendering, and creation of many machinings. It provides strategies to minimize the lead time and maximize the finishing quality, from the design to the manufacture of the product. The security doors guarantee a protected process for a total operator’s safety.



    Stainless steel structure: Thanks to the stainless steel structure the machining centers from the Helios Star series are sturdy machines, that preserve their quality over the time;



    High-quality electronics: The machining centers from the Helios Star series are equipped with high efficiency brushless motors. Thanks to the use of high frequency inverter, that provides only the necessary power for the mechanical efficiency, there are no wastes of energy, and the maximum energy saving is guaranteed;



    Interpolated rotating table: The interpolated rotating table has a carrying capacity of 1/65 ton.

  • Stone CNC router marble stone engraving machine
    favorites
    Add To Compare

    Type: Factory MachinesStone Finishing, Profiling MachinesStone Carving,Engraving Machine

    $6000-9000

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Artificial Stone, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    1. With chinese leadshine easy motor and driver, bigger power.
    2. 6.0kw water cooling spindle ,7.5kw Fuling inverter, The most famous brand, have after-sales service all over the world.
    3. FL118 Stepper motor and YAKO2811 Big Driver
  • Waxing Machine for Travertine,Granite Slabs
    favorites
    Add To Compare

    Type: Factory MachinesStone Finishing, Profiling MachinesStone Waxing Machine

    $11000-12000

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    This machine features beam balance for reciprocating motion andpneumatic control for vertical moving of wax disc, so it has advantages ofstable performance and easy operation, It is specially designed for waxingon granite slabs,minicrystal and artficial stone slabs after polishing toincrease surface glossiness.
  • Bench Top Drilling Machine For Undercut Anchor
    favorites
    Add To Compare

    Type: Factory MachinesStone Finishing, Profiling MachinesStone Drilling, Slot Machine

    $6500-7000

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    Automatic Drilling Machine for Undercut Anchors  
    Equipment introduction:Applicable for stone panels, concrete panels,ceramic plates,and other cladding panels. Such as granite, marble, travertine, sand stone, crystal glass, quarz, ceramic, etc. 
    Equipment features:
    ·Easy to operate
    ·Single die
    ·Automatic drill 
    Equipment configurations:
    ·Stainless steel frame, assembled with aqua storage tank and desk universal roller
    ·Electric control system
    ·Stone positioning system
    ·Plates can be adjusted in both X, Y directions
    ·Automatic drill technique of water cooling diamond
    ·Clear plate surface with water spraying·Checking tool of pore forming 

    Technical characteristics:Automatic air supply system, Automatic circulating water system, Drilling positioning system, Drill compensation regulation system. 

    Equipment parameters:
    1.Voltage: 380v.
    2.Motor power: 2.2KW .
    3.Air pressure: 0.6 Mpa.
    4.Water pressure: 0.15 Mpa.
    Specification: 1900*1650*1550mm. 
    Drilling parameters:
    1.Max hole depth:40mm.
    2.Min spacing: 150mm.
    3.Max plate width: 1200mm.
    4.Max plate length: 1800mm.
    5.Min plate thickness: 12mm. 
    Precision of drilling position:about 1mm.
  • Waterjet CNC
    favorites
    Add To Compare

    Type: Factory MachinesStone Finishing, Profiling MachinesWaterjet Machines

    Warranty: 12 Months

    Usage: Granite, Marble, Artificial Stone

    Machinery Function Features:

    Helios Jet is a fast and performing 3/5 interpolated axes waterjet saw. It has been developed for high precision cutting processes on porcelain, compact surfaces, quartz, as well as marbles and granites. It is the essential waterjet that gives you the fundamental versatility of waterjet cutting. Engineered with the same technology as the other Helios cutting solutions, the Helios Jet features robust cutting capabilities and user-friendly software for added flexibility.
  • Stone CNC Router,Stone Engraving Machine for Marble Granite Gravestone Tombstone,
    favorites
    Add To Compare

    Type: Factory MachinesStone Finishing, Profiling MachinesStone Carving,Engraving Machine

    $7000-9500

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    Application:
    Stone serious engraving machine is mainly used in the engraving of the hard materials.
    Such as marble, grantie, glass, stone,etc.
    Advantages:
    1) Heavy duty steel machine bed, it's very strong and stability;
    2) Powerful 5.5kw water cooling spindle, perfect working for stone carving;
    3) With DSP A11 control system, without connect with computer and easy to operation
  • CNC Laser etching machine
    favorites
    Add To Compare

    Type: Factory MachinesStone Finishing, Profiling MachinesStone Carving,Engraving Machine

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    The laser systems from the series Photograb LS and the Galaxy Stone LS software have been developed directly from Helios Automazioni engineers to answer the several requests regarding etching and marking on all types of stones, ceramics, glass, wood, leather, etc... The flexibility of the laser system allows to achieve several jobs suitable to different application fields from sacred art to interior design. High definition processes at very low management costs.



    Stainless steel structure: Thanks to the stainless steel, from the fixing bolts to the structure, Helios Photograb LS is a sturdy machine, that preserves its quality over the time;



    High-quality electronics: The electronic components of Helios Photograb LS have got CE certifications, important quality indicators. The software and the controlling unit can manage the intensity of the laser source with excellent finishing results at low management costs;



    Adjustable height: The possibility to adjust the height of the nozzle is a great advantage for the laser processes. This flexibility makes it possible to work any type of material, independently from their thickness. The Photograb LS series can process from 1 to 230 mm thick slabs (from 0,04 in to 9,05 in).
  • Chinese stone CNC router 4 axis 3d carving machine with rotary device for stone engraving
    favorites
    Add To Compare

    Type: Factory MachinesStone Finishing, Profiling MachinesStone Carving,Engraving Machine

    €6000-9000

    Warranty: 12 Months

    Usage: Granite, Marble, Slate, Artificial Stone, Quartzite

    Machinery Function Features:

    1. DSP A18 4 axis control ststem
    2. Well suitable for processing stone,granite,marble
    3. The diameter of rotary axis is 300mm
    4. The sink table of rotary device is made of stainless steel
    5. Z axis is 400mm,Processing different materials
  • Helios 5 CNC Working Center Fab Center - Cnc Machine - Cnc Router
    favorites
    Add To Compare

    Type: Factory MachinesStone Finishing, Profiling MachinesCNC Working Center

    Warranty: 12 Months

    Usage: Granite, Marble, Artificial Stone, Basalt

    Machinery Function Features:

    Helios Five is an extremely precise 5-axis machining center and bridge saw (6 axes with the lathe), with automatic tool change and magazine, that can be extended according to specific needs. The possible configurations make the machine suitable for the execution of important works, from roughing to finishing, with highly detailed results. The precision of the Helios Five allows achieving the greatest part of the stone processes possible, such as small and large sculptures and statues, kitchen tops with profiling and edge polishing, drain boards and much more. This feature makes Helios Five unique in its category.
    As a bridge saw, the machine can work with disks with diameters of up to 725 mm. Thanks to its imposing structure and the technology developed by Helios. Helios Five can process all types of cut with extreme precision (45° angled cuts, shaped cuts, arches cuts angled on both sides, etc…)
    Helios Five can have the Z stroke of 680, 1000 or 1200 mm and can be equipped with the interpolated lathe, thus increasing the executable machining in the stone sector.
  • Marble/Quartz/Stone CNC machining center, Stone CNC Machine, Stone CNC Router
    favorites
    Add To Compare

    Type: Factory MachinesStone Finishing, Profiling MachinesCNC Working Center

    $25200-31200

    Warranty: 12 Months

    Usage: Granite, Marble, Slate, Artificial Stone, Basalt, Quartzite

    Machinery Function Features:

    * By automatically changing tools, many processes can be completed, such as polishing of the back splash, abnormal edges of the front edge, cutting and polishing of the tap hole.
    * Quartz processing centers are widely used in artificial stone, quartz countertops and sinks
    * This machine can meet the processing requirements of cutting, edging, polishing and engraving of different materials.
  • Table Drilling Machine For Undercut Anchor
    favorites
    Add To Compare

    Type: Factory MachinesStone Finishing, Profiling MachinesStone Drilling, Slot Machine

    $6500-7000

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    Automatic Drilling Machine for Undercut Anchors  
    Equipment introduction:Applicable for stone panels, concrete panels,ceramic plates,and other cladding panels. Such as granite, marble, travertine, sand stone, crystal glass, quarz, ceramic, etc. 
    Equipment features:
    ·Easy to operate
    ·Single die
    ·Automatic drill 
    Equipment configurations:
    ·Stainless steel frame, assembled with aqua storage tank and desk universal roller
    ·Electric control system
    ·Stone positioning system
    ·Plates can be adjusted in both X, Y directions
    ·Automatic drill technique of water cooling diamond
    ·Clear plate surface with water spraying·Checking tool of pore forming 

    Technical characteristics:Automatic air supply system, Automatic circulating water system, Drilling positioning system, Drill compensation regulation system. 

    Equipment parameters:
    1.Voltage: 380v.
    2.Motor power: 2.2KW .
    3.Air pressure: 0.6 Mpa.
    4.Water pressure: 0.15 Mpa.
    Specification: 1900*1650*1550mm. 
    Drilling parameters:
    1.Max hole depth:40mm.
    2.Min spacing: 150mm.
    3.Max plate width: 1200mm.
    4.Max plate length: 1800mm.
    5.Min plate thickness: 12mm. 
    Precision of drilling position:about 1mm.
  • Edge Line Stone Profiling, Polishing Machine
    favorites
    Add To Compare

    Type: Factory MachinesStone Finishing, Profiling MachinesEdge Profiling, Polishing Machine

    $10500-13500

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    Basic Info.
    Model NO. HLFQ-3000
    Certification SONCAP, ISO, CE
    Blade Size 350-600mm
    Max.Working Dimension -3000*1150*600mm
    Max.Cutting Thickness 180mm
    Cutting Speed 0-7500mm/Min
    Main Motor Power 15kw
    Water Consumption 4 M3/H
    Gross Weight 4800kg
    Specification 5000*2200*2400m
    HS Code 84641090
  • Professional Stone CNC Router, Stone CNC Machine,Stone cutting Machine
    favorites
    Add To Compare

    Type: Factory MachinesStone Finishing, Profiling MachinesStone Carving,Engraving Machine

    $5700-9700

    Warranty: 12 Months

    Usage: Granite, Marble, Slate, Artificial Stone

    Machinery Function Features:

    Classic Stone CNC Router machine for carving and cutting with water-cooled spindle, which has the advantages of high processing accuracy, fast processing speed and good cooling effect. It has always been a popular machine in the CNC stone carving and sometimes in stone cutting field
  • Helios Seven CNC Edge Profiling Machine
    favorites
    Add To Compare

    Type: Factory MachinesStone Finishing, Profiling MachinesEdge Profiling, Polishing Machine

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite, Sandstone

    Machinery Function Features:

    Helios Seven is of the latest generation machining center, developed to answer the requests of the most demanding stone fabricators. The entire stainless steel structure has been conceived to pursue unlimited durability over time. The use of recirculating ball screws and zero-backlash gears makes the machine’s movement of the axes very fluid, thus guaranteeing a highly detailed finished product. Thanks to the use of high-frequency inverter, which supplies only the necessary power for mechanical efficiency, the maximum energy saving is ensured. The Galaxy Stone Software manages the machining center and optimizes all the functions of the machine from the edge polishing to writing, sculpturing, skene, inlays, shallow kerfs for the rodding technique, and much more. The Galaxy Stone software can manage the multiple interpolations of the axes, the tool change, the flatness control of the slabs, the template reading from the camera, and all the devices, which can be equipped on the machine without any other integrated software.
  • Single Head Plane Engraving Machine
    favorites
    Add To Compare

    Type: Factory MachinesStone Finishing, Profiling MachinesStone Carving,Engraving Machine

    $5000-20000

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    1-head Plane Engraving Machine
  • Stone CNC Engraving Machine, Stone CNC Router with Automatic Tool Changer
    favorites
    Add To Compare

    Type: Factory MachinesStone Finishing, Profiling MachinesStone Carving,Engraving Machine

    $6500-10500

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Artificial Stone, Quartzite

    Machinery Function Features:

    Equipped with HQD water cooling spindle, it can reduce the noise during the machining.
    Manufactured with Japan Yaswaka servo motor and SHIMPO reducer, the machine is more stable during the quick machining and has a longer service life.
    With a large tube lathe adopted, the machine has good processing stability.
  • Two Heads Plane Engraving Machine
    favorites
    Add To Compare

    Type: Factory MachinesStone Finishing, Profiling MachinesStone Carving,Engraving Machine

    $5000-20000

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    2-heads Plane Engraving Machine
  • Two-process Stone Processing Center for Sale- CNC Working Center
    favorites
    Add To Compare

    Type: Factory MachinesStone Finishing, Profiling MachinesCNC Working Center

    $18000-26000

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    It can help customers realize edging and engraving functions of the countertops. One machine has multiple functions and has a small footprint.
    The edging function and engraving function of countertops can be switched in one-key operation, which is easy to operate.
    This machine can realize fast tool change in 3 seconds, with more powerful functions and higher processing efficiency.
    Two spindles can be automatically switched according to processing requirements. This reduces tool change time and wastes, and correspondingly improves processing efficiency.
  • 3-Heads Long Plane Engraving Machine
    favorites
    Add To Compare

    Type: Factory MachinesStone Finishing, Profiling MachinesStone Carving,Engraving Machine

    $5000-20000

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    3-heads Long Plane Engraving Machine
  • Photograb LS Laser Engraving Machine - Photo Etching Machine
    favorites
    Add To Compare

    Type: Factory MachinesStone Finishing, Profiling MachinesStone Carving,Engraving Machine

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    The laser systems from the series Photograb LS and the Galaxy Stone LS software have been developed directly from Helios Automazioni engineers to answer the several requests regarding etching and marking on all types of stones, ceramics, glass, wood, leather, etc... The flexibility of the laser system allows achieving several machining suitable to different application fields from sacred art to interior design.
  • Xianda 3 AXIS CNC STONE ENGRAVING MACHINE 1 HEAD 2 HEAD PEM-3015-1D/2D/3D/4D-350-650
    favorites
    Add To Compare

    Type: Factory MachinesStone Finishing, Profiling MachinesStone Carving,Engraving Machine

    $15000-20000

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    This machine adopts numerical control system, three-axis linkage, double row four-row slider, constand power spindle motor, two-way tool cooling system, with stable running, high precision and high efficiency advantages, suitable for processing marble, granite, bluestone, jade, agate, copper plate and aluminum plate and other materials.
  • 4-Heads Granite Engraving Machine
    favorites
    Add To Compare

    Type: Factory MachinesStone Finishing, Profiling MachinesStone Carving,Engraving Machine

    $5000-20000

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    4-heads Granite Engraving Machine
  • 4 Axis Arc Slab & Column Carving Machine (TERRY) ACM-2515 ACM-3015-2X / ACM-3015-2Q
    favorites
    Add To Compare

    Type: Factory MachinesStone Finishing, Profiling MachinesStone Carving,Engraving Machine

    $32000-47000

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    4 Axis machine Carving Machine
  • KGP- 650 LX Tile/Strip Calibrating and polishing machine
    favorites
    Add To Compare

    Type: Factory MachinesStone Finishing, Profiling MachinesCalibrating Machine

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Sandstone, Travertine

    Machinery Function Features:

    KGP RX High-performance calibrating and polishing machine calibrates and polishes tiles and strips. Different numbers of calibrating and polishing heads can be added according to the process. It can be produced in different working widths. Thanks to high-tech components and flawless software, it offers a unique production to its customers.
  • BM05 Bullnose Edge Profiling  and Polishing Machine
    favorites
    Add To Compare

    Type: Factory MachinesStone Finishing, Profiling MachinesEdge Profiling, Polishing Machine

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Quartzite, Travertine

    Machinery Function Features:

    We have bullnose machine according your request for 3,4,6 heads.
    Forward & Backward Profiling Motor Movement With Manuel Hand Wheel
    Up & Down Bullnose Motor Movement With Manuel Hand Wheel
  • Brembana Aquatec: 3- and 5-axis hydro-abrasive waterjet cutting system
    favorites
    Add To Compare

    Type: Factory MachinesStone Finishing, Profiling MachinesWaterjet Machines

    €-1

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Artificial Stone, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    3- and 5-axis hydro-abrasive waterjet cutting system
    Brembana aquatec is an advanced, versatile, high-performance abrasive waterjet cutting system, able to accommodate the most diverse production demands in different application fields, delivering highly accurate cuts. The machine consists of a mobile bridge moving along separate highthickness steel supports, fastened to the floor and providing outstanding structural rigidity. This structure delivers high performances even by the most demanding tasks.
    the motions - including the one of the cutting head - are carried out by high precision tempered ground rack, driven by brushless motors.
    steel guards and the polyurethane bellows protect all motion components from water and powders.
    loading and unloading the material is fast and simple thanks to 2 or 4 open sides, as well as checking the cutting process. Moreover it allows to possibly install additional equipment to handle the material.
    brembana aquatec is available also in the following versions:
    - Twin (solution for pendular working with double tank)
    - brembana greenjet evo on board
    - Double brembana greenjet evo on board
  • HQ1390 CNC Laser Engraving and Etching Machine for Gravestones
    favorites
    Add To Compare

    Type: Factory MachinesStone Finishing, Profiling MachinesStone Carving,Engraving Machine

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    Application Industry:
    All kinds of stone processing industry, advertisement processing industry, embroiders cotton business, the apparel industry, the shoe manufacture industry, the trademark processing industry, the craft present industry and so on.
    Suitable materials:
    all kinds of stones, like granite, marble, Plexiglas, the cotton material, the rubber, the acrylic, the cardboard, the leather, embroider, the wood and bamboo sign, the paper product.
    Technical Index:
    Laser Style: Sealed-Off CO2 Laser
    Laser power: 80/100w
    Engraving size: 1300 * 900mm
    Engraving speed: 0-60000mm/min
    Repeat location precision: +/- 0.1mm
    Power supply: AC220v +/- 10%, 50Hz
    Total Power: <2500W
    Operating temperature: 0-45 degree centigrade
    Operating Humidity:5-95%
    Maximum engraving depth: 3.5mm
    Minmum cutting character: Chinese character: 2mm, English letter: 1mm
    Available Picture Format: BMP, PLT, DST, DXF, AI
    Machine Size: 1320x1000x1050mm
    Machine Weight: 180kg
    Cooling way: cold water
    Product Configuration:
    1. Machine body is consisted of 3mm steel plate platform. We first use split machine boday in this industry so that users can move the machine into standard room as they prefered. Integrate the movement system and laser system in one plane, and make the mechanical system and laser system work more steadily.
    2. Using DSP dingital CMOS chip control board, can be compatible of CoreIDAW, CAD direct output, support BMP, PLT, AI DST, DXF format.
    3. Using USB data transmition technology, can transmit docuemtns or pictures from computer to machine dirctly.
    Applicable Materials:
    Nonmetal materials such as rubber, plastic, crystal, plexiglass, acrylics, bamboo and wooden, marble, China, paper, garment, jade article, glass etc.
    Applicable industry:
    Processing industries of large-scale engraving and cutting, such as clothing&leather, packaging&plate making, handicraft, advertisement&decoration, construction&fittings, mould, toys, embroidery and cutting. Special Recommended:
    <20mm acrylic cutting, <15mm wood board cutting, cloth and leather cutting.
  • WAMIT 420mpa 3000*2000mm desktop CNC waterjet cutting machine
    favorites
    Add To Compare

    Type: Factory MachinesStone Finishing, Profiling Machines

    $49990-54990

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Artificial Stone, Quartzite, Sandstone

    Machinery Function Features:

    420mpa 3000*2000mm desktop CNC waterjet cutting machine
    if with our new model direct drive pump, the electricity cost will be 60% lower and cutting speed will be 20% higher
    ADVANTAGES:
    1. we promise 2 years( 2000 hours) warranty always. and have got CE certificate
    2. we use flow type ECL cutting head, the cutting efficiency is at least 10% higher.
    3. the abrasive sand hopper beside the cutting head is also FLOW design.
    4. we have new technology that can make the machine moving speed is to 30m/min. normal speed is 6m/min as you see. if this
    technology used in pure water cutting, the cutting cost will reduce 50%. if using other materials cutting like glass , marble,
    steel, the cutting cost will also 20-30% reduced. but of course , the machine with this function price will be a little higher.
    5. we use soft cover of the linear guider, can prevent dust away from the linear guider, so keep the linear guider keep precision
    longer.
    6. we assemble an auto oil feeding to linear guider, so customer needn't maintenance the linear guider always.
    7. seperated body.
    8. we will send a remote control pendent.
    9. we have the world most convenient abrasive sand removing system. it can be used for any brand water jet cutting machine, maybe
    you can promote this system in your country and other countries. please check the attachment.
    11. we supply 420mpa pump with 37KW motor, but the price of the whole machine is very competitive now
    12. we use variable pump, so can reduce electricity cost for customers.
    13. we can do 220V and 415v also.
    14. like height tracking system, positioning system , we can also provide.
    15. all our components are SCHNEIDER brand
    16. the motor and PLC are SIEMENS brand.
    17. we can provide AB 5 axis with 10 degree and AC 3D 5 axis with 60 degree.
    18. use 10mm steel for water tank supporter and use 8mm steel for beam, keep the machine working more stable.
    19. use JAPAN YASKAWA servo motor.
    20. imported TAIWAN HIWIN ball screw and linear guider
    21. imported America intensifier assembly and TAIWAN accumulator and high pressure assembly and low pressure assembly. if you have special
    requests, we can also do.
    22. we can provide 80Kpsi and 90KPSI intensifier pump and 60KPSI direct drive pump.
    23. can make Touch screen
    24. automatic calibration gantry perpendicularity
  • Techno MBM Mono Astra CNC Routers
    favorites
    Add To Compare

    Type: Factory MachinesStone Finishing, Profiling MachinesCNC Working Center

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Onyx, Sandstone

  • Linear Stone Profiling Machine Gantry Lifting PLC CNC
    favorites
    Add To Compare

    Type: Factory MachinesStone Finishing, Profiling MachinesStone Profiling Line Machine

    $15000-25000

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    Machine adopts computer profiling lines. It automatically track model of curve (straight) line through the fiber optic probe, automatically profiling through diamond circular saws to cut stone with curve (straight) line and craft products, uses inverter to control up-down rising and left-right feeding, adjusts the speed according to the stone material. This machine adopts PLC system, high degree of automation, high precision cutting; using double-blades designing, with high cutting efficiency, high stabolity, easy-operation to suit for lines, arc-shaped lines, Roman column, etc.
    Remark: CNC system are optional.
  • Omag Mill4X CNC Stone Working Center
    favorites
    Add To Compare

    Type: Factory MachinesStone Finishing, Profiling MachinesCNC Working Center

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    In one single cnc 3/4 axes machines all the shaping and lathing functions are gathered.
    OMAG MILL4X is a numerically controlled machining centre from 3 to 4 axes, which groups in a single unit all the functions of a former and a lathe.
    MILL4X results from OMAG’s 25 years’ manufacturing experience, which combines the best technologies with a simplicity in setting up work for forming, routing, engraving, milling, sculpting, sawing, polishing and lathe work on marble, granite, all types of stone and glass.
    MILL4X is a high output machine both for on-line production and for single, one-off pieces.
    The axes are driven at high speed by brushless motors combined with ball bearing screws, while lasting quality and precision are assured by linear guides with ball runners, moving parts protected by PVC bellows and a centralised oil lubricating system.
    The mobile bridge technology makes MILL4X a modular machine since the supplementary application of the lathe system or the extending of the work area can be done in any moment, depending on the customer’s requirements.
    The NC systems used are supplied by the main international producers, while OMAG’s staff develops the software (CAD/CAM) and customises the machine functions, also guaranteeing a training service and both pre- and after-sales assistance.
  • UT3015ATC CNC Working Center
    favorites
    Add To Compare

    Type: Factory MachinesStone Finishing, Profiling MachinesCNC Working Center

    $24500-28000

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    * By automatically changing tools, many processes can be completed, such as polishing of the back splash, abnormal edges of the front edge, cutting and polishing of the tap hole.
    * Stone processing centers are widely used in artificial stone, quartz countertops and sinks
    * This machine can meet the processing requirements of cutting, edging, polishing and engraving of different materials.
  • TJ-S150 Stone Stamping And Splitting Machine
    favorites
    Add To Compare

    Type: Factory MachinesStone Finishing, Profiling MachinesStone Stamping Machine

    $7800-8154

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    Stamping and splitting machine
  • TJPGD-150 Calibration Machine- Calibrating Machine
    favorites
    Add To Compare

    Type: Factory MachinesStone Finishing, Profiling MachinesCalibrating Machine

    $5800-6100

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Sandstone, Travertine

    Machinery Function Features:

    This machine is used for calibrating for stone products.
  • TJMY-300 Stone Drilling Machine, Slot Machine
    favorites
    Add To Compare

    Type: Factory MachinesStone Finishing, Profiling MachinesStone Drilling, Slot Machine

    $4500-4800

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    This machine is used for drilling holes on stone products.

Have a Question? Ask our expert

Clear All
Compare (0/4)
StoneContact
Tips

Tell Suppliers what you want to buy