If you need our help, we will be glad to help you until you find your products.
Skype: StoneContact.com
WhatsApp/Wechat: +86-17689946988
Clear All
Compare (0/4)
Home ProductsStone MachineryStone Factory MachinesStone Surface Processing Machines Travertine Surface Processing Machines
Travertine Surface Processing Machines
( 204 )Stonecontact.com offers you the advanced machines of the world's leading machinery companies in every brand, every country and every model for stone surface processing at affordable prices. Before cutting the natural stone slabs or sometimes after cutting them to cut-to-size, some processing is applied to the stone surface according to the purpose you will use: polishing, grinding, sandblasting, tumbling, flaming, leathering, etc. Thanks to the developing technology, it is now possible to do all of these operations with a single machine today. But depending on your request, you can also find single processing type machines for each surface finishing on stonecontact.com. For example, aging machines, polishing machines, sandblasting machines, flaming machines, tumbling machines, etc.
More Hide
Categories:
Slab Polishing Line Machine (92)
Single Head Polishing Machine (21)
Arm Polishing Machine (31)
Vibratory Tumbling Machine (8)
Rotary Tumbling Machine (3)
Stone Flaming Machine (5)
Stone Sandblasting Machine (13)
Stone Brushing-Aging Machine (2)
Bush Hammering Machine (9)
Stone Grooving Machine (4)
Water Blast Machine (7)
Bridge Polishing Machine for Slabs (9)
Show More
-
Add To CompareType: Stone Factory MachinesStone Surface Processing Machines Slab Polishing Line Machine
FOB Price:
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
FEATURES
BASE
Monolithic high-thickness steel base electro-welded with rectified sliding surface.
INTERCHANGEABLE WEAR-PROOF SURFACES
Made with special steel (UBNW.1.446), thickness 3 mm, to guarantee planarity over time and facilitate maintenance.
SURFACE TREATMENT
All parts are treated inside our Company, with hand sand-blasting, cold galvanising and coating with bi-component epoxy base. On request, base and shoulders can be treated with Cataphoresis or hot dip galvanising. All screws are stainless steel.
3-BELT CONVEYOR
Driven by two large-diameter drums and inverter adjustable speed. Unique system to clean and lubricate the belt to ensure uniform sliding. The drive drum is coated with vulcanised rubber to prevent slipping and ensure flow smoothly.
SPINDLE HOLDER BEAM
Sliding on the shoulders fitted with roller cage in oil bath, protected by sealed stainless steel telescopic guards. Hardened steel sliding elements interchangeable and installed on the shoulders and bridge. The spindles are housed in the centre of the beam to ensure complete stability and eliminate any possibility of vibration.
BRIDGE TRANSLATION
With pinion and rack. Central gearmotor and antirotation bar with large diameter. Shifting speed controlled from inverter).
CALIBRATION UNITS
- Calibrator spindle made with heavy steel metalwork with rectified chromeplated sleeve, that slides through cast iron bushing to absorb vibrations during processing. On the spindle plate where it serves as a flywheel and is dynamically balanced, there are calibrator rings with diamond sectors installed on them (Ø 670-870-1050 mm). Electric drive can be 22 or 30 kW.
- An automatic system combined with motor absorption acts on conveyor speed, slowing it in case of excessive overload, making the spindle stop and automatically lift. The spindle is automatically repositioned with absolute precision when the operating cycle starts back up again. The calibrator is managed from the touch screen for all of its automatic and manual functions. Automatic positioning at the pre-selected height with centesimal precision.
POLISHING UNITS
- Cast iron polishing spindles, installed in the centre of the beam, with thick and rectified chrome-plated steel shaft, sliding on bronze bushing, complete with pneumatic cylinder for lifting abrasive carrier plate.
Each spindle is fitted with a pressure gauge to control pressure and counter-pressure to balance the head during the work.
- Motors. 7.5 or 11 kW motors with single or sequential start-up. Drive transmission through high-output pulleys and belts.
- Ø 470/510 aluminium alloy polishing plates complete with Frankfurt fittings for seven abrasives. They are equipped with a multidirectional shock absorbing system to ensure maximum operating homogeneity and efficiency of the abrasive.
- Automatic centralised lubrication system of the spindles with the possibility of setting quantities and intervention.
- Abrasive finished. The machine is equipped with a system to set the thickness of the piece being processed based on which, a sensor installed on each head, calls the attention of the operator to replace the abrasive, when finished.
- Slab-guide supports with screw movement through flywheel from a unique station, complete with stainless steel slab-guide.
- Material presence detection unit to control the automatic up/down movement of heads in case of discontinuity between pieces.
SAFETY AND PROTECTIONS
- Front PLT doors with interlocking limit switch to avoid opening before the spindles stop. Side and rear stainless steel guards, easy to inspect.
ELECTRONICS: THE "THINKING HEART" OF LMS
- Reliable. After careful testing, the parts are chosen from the leading companies in the specific sectors. To minimise the probability of failure or interference, a modern “can open” network system is installed on board, which drastically reduces the number of cables between sections.
- Software developed entirely by GMM, guaranteed over time, improvable and most of all customizable according to customer requirements.
- 12" Touch Screen. Interactive graphics for complete machine cycle management with start-up in sequence of spindles, conveyor motor and bridge motor. To manage spindle down/up based on piece presence.
To view the abrasive consumption status for each head.
- Data base. Broad possibility to store large amounts of informations about work done or in process.
GMM
Italy
Gmm S.p.A.
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Surface Processing Machines Slab Polishing Line Machine
FOB Price:
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Quartzite, Sandstone, Travertine
Machinery Function Features:
General Characteristics
The SNM-PC is a heavy duty belt type polishing machine with surprising results in working speed and polishing degree. It ensures optimal finishing at low processing cost.
Because its components are mass-produced on computer numerial control (CNC) machines in house by SNIC, this machine is offered at an incredible low price.
The maintenance cost of this amchine is very low, thanks to the hight quality of all its components. A yearly maintenance contract(labor and spare parts)is offered for a 5% annual fee.
It comes in various to meet a variety of machining requirements. Depending on the material to be polished, it can be fitted with a different number of calibrating and polishing heads.
Each spindle unit is driven by an electric motor, and the raising, lowering and working pressures are pneumatically controlled. Machine is designed to run both on 50hz and 60hz with asynchronous 3-phase motors.
All push-buttons are housed in a stainless steel frame fixed to the upper part of the machine for better control.
SNIC
Lebanon
S.N.I.C.- Societe Nahas Pour L'industrie Et Le Commerce
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Surface Processing Machines Rotary Tumbling Machine
FOB Price:$19000-26000
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Tumbling Machine for Tile-T2800
T2800 Multi function granite grinding machine
It is an ideal machine for horn, antiquating and polishing for tiles.
The polyurethane guarantees the long working life.
The clapboards can be removed to match products of different sizes.
Two vibrator motors provide uniform vibration.
Inverter to control the tumbling motor.
1.Good for tile of big size.
2.Polish completely.
3.Vibration speed controlled by inverter.
4.Working time preset.
5.Long life working.
Stoneplus
China
STONEPLUS MACHINERY CO.,LTD
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Surface Processing Machines Slab Polishing Line Machine
FOB Price:
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Quartzite, Sandstone, Travertine
Machinery Function Features:
FEATURES
BASE
Monolithic high-thickness steel base electro-welded with rectified sliding surface.
INTERCHANGEABLE WEAR-PROOF SURFACES
Made with special steel (UBNW.1.446), thickness 3 mm, to guarantee planarity over time and facilitate maintenance.
SURFACE TREATMENT
All parts are treated inside our Company, with hand sand-blasting, cold galvanising and coating with bi-component epoxy base. On request, base and shoulders can be treated with Cataphoresis or hot dip galvanising. All screws are stainless steel.
3-BELT CONVEYOR
Driven by two large-diameter drums and inverter adjustable speed. Unique system to clean and lubricate the belt to ensure uniform sliding. The drive drum is coated with vulcanised rubber to prevent slipping and ensure flow smoothly.
SPINDLE HOLDER BEAM
Sliding on the shoulders fitted with roller cage in oil bath, protected by sealed stainless steel telescopic guards. Hardened steel sliding elements interchangeable and installed on the shoulders and bridge. The spindles are housed in the centre of the beam to ensure complete stability and eliminate any possibility of vibration.
BRIDGE TRANSLATION
With pinion and rack. Central gearmotor and antirotation bar with large diameter. Shifting speed controlled from inverter).
CALIBRATION UNITS
- Calibrator spindle made with heavy steel metalwork with rectified chromeplated sleeve, that slides through cast iron bushing to absorb vibrations during processing. On the spindle plate where it serves as a flywheel and is dynamically balanced, there are calibrator rings with diamond sectors installed on them (Ø 670-870-1050 mm). Electric drive can be 22 or 30 kW.
- An automatic system combined with motor absorption acts on conveyor speed, slowing it in case of excessive overload, making the spindle stop and automatically lift. The spindle is automatically repositioned with absolute precision when the operating cycle starts back up again. The calibrator is managed from the touch screen for all of its automatic and manual functions. Automatic positioning at the pre-selected height with centesimal precision.
POLISHING UNITS
- Cast iron polishing spindles, installed in the centre of the beam, with thick and rectified chrome-plated steel shaft, sliding on bronze bushing, complete with pneumatic cylinder for lifting abrasive carrier plate.
Each spindle is fitted with a pressure gauge to control pressure and counter-pressure to balance the head during the work.
- Motors. 7.5 or 11 kW motors with single or sequential start-up. Drive transmission through high-output pulleys and belts.
- Ø 470/510 aluminium alloy polishing plates complete with Frankfurt fittings for seven abrasives. They are equipped with a multidirectional shock absorbing system to ensure maximum operating homogeneity and efficiency of the abrasive.
- Automatic centralised lubrication system of the spindles with the possibility of setting quantities and intervention.
- Abrasive finished. The machine is equipped with a system to set the thickness of the piece being processed based on which, a sensor installed on each head, calls the attention of the operator to replace the abrasive, when finished.
- Slab-guide supports with screw movement through flywheel from a unique station, complete with stainless steel slab-guide.
- Material presence detection unit to control the automatic up/down movement of heads in case of discontinuity between pieces.
SAFETY AND PROTECTIONS
- Front PLT doors with interlocking limit switch to avoid opening before the spindles stop. Side and rear stainless steel guards, easy to inspect.
ELECTRONICS: THE "THINKING HEART" OF LMS
- Reliable. After careful testing, the parts are chosen from the leading companies in the specific sectors. To minimise the probability of failure or interference, a modern “can open” network system is installed on board, which drastically reduces the number of cables between sections.
- Software developed entirely by GMM, guaranteed over time, improvable and most of all customizable according to customer requirements.
- 12" Touch Screen. Interactive graphics for complete machine cycle management with start-up in sequence of spindles, conveyor motor and bridge motor. To manage spindle down/up based on piece presence.
To view the abrasive consumption status for each head.
- Data base. Broad possibility to store large amounts of informations about work done or in process.
GMM
Italy
Gmm S.p.A.
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Surface Processing Machines Slab Polishing Line Machine
FOB Price:
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
FEATURES
BASE
Monolithic high-thickness steel base electro-welded with rectified sliding surface.
INTERCHANGEABLE WEAR-PROOF SURFACES
Made with special steel (UBNW.1.446), thickness 3 mm, to guarantee planarity over time and facilitate maintenance.
SURFACE TREATMENT
All parts are treated inside our Company, with hand sand-blasting, cold galvanising and coating with bi-component epoxy base. On request, base and shoulders can be treated with Cataphoresis or hot dip galvanising. All screws are stainless steel.
3-BELT CONVEYOR
Driven by two large-diameter drums and inverter adjustable speed. Unique system to clean and lubricate the belt to ensure uniform sliding. The drive drum is coated with vulcanised rubber to prevent slipping and ensure flow smoothly.
SPINDLE HOLDER BEAM
Sliding on the shoulders fitted with roller cage in oil bath, protected by sealed stainless steel telescopic guards. Hardened steel sliding elements interchangeable and installed on the shoulders and bridge. The spindles are housed in the centre of the beam to ensure complete stability and eliminate any possibility of vibration.
BRIDGE TRANSLATION
With pinion and rack. Central gearmotor and antirotation bar with large diameter. Shifting speed controlled from inverter).
CALIBRATION UNITS
- Calibrator spindle made with heavy steel metalwork with rectified chromeplated sleeve, that slides through cast iron bushing to absorb vibrations during processing. On the spindle plate where it serves as a flywheel and is dynamically balanced, there are calibrator rings with diamond sectors installed on them (Ø 670-870-1050 mm). Electric drive can be 22 or 30 kW.
- An automatic system combined with motor absorption acts on conveyor speed, slowing it in case of excessive overload, making the spindle stop and automatically lift. The spindle is automatically repositioned with absolute precision when the operating cycle starts back up again. The calibrator is managed from the touch screen for all of its automatic and manual functions. Automatic positioning at the pre-selected height with centesimal precision.
POLISHING UNITS
- Cast iron polishing spindles, installed in the centre of the beam, with thick and rectified chrome-plated steel shaft, sliding on bronze bushing, complete with pneumatic cylinder for lifting abrasive carrier plate.
Each spindle is fitted with a pressure gauge to control pressure and counter-pressure to balance the head during the work.
- Motors. 7.5 or 11 kW motors with single or sequential start-up. Drive transmission through high-output pulleys and belts.
- Ø 470/510 aluminium alloy polishing plates complete with Frankfurt fittings for seven abrasives. They are equipped with a multidirectional shock absorbing system to ensure maximum operating homogeneity and efficiency of the abrasive.
- Automatic centralised lubrication system of the spindles with the possibility of setting quantities and intervention.
- Abrasive finished. The machine is equipped with a system to set the thickness of the piece being processed based on which, a sensor installed on each head, calls the attention of the operator to replace the abrasive, when finished.
- Slab-guide supports with screw movement through flywheel from a unique station, complete with stainless steel slab-guide.
- Material presence detection unit to control the automatic up/down movement of heads in case of discontinuity between pieces.
SAFETY AND PROTECTIONS
- Front PLT doors with interlocking limit switch to avoid opening before the spindles stop. Side and rear stainless steel guards, easy to inspect.
ELECTRONICS: THE "THINKING HEART" OF LMS
- Reliable. After careful testing, the parts are chosen from the leading companies in the specific sectors. To minimise the probability of failure or interference, a modern “can open” network system is installed on board, which drastically reduces the number of cables between sections.
- Software developed entirely by GMM, guaranteed over time, improvable and most of all customizable according to customer requirements.
- 12" Touch Screen. Interactive graphics for complete machine cycle management with start-up in sequence of spindles, conveyor motor and bridge motor. To manage spindle down/up based on piece presence.
To view the abrasive consumption status for each head.
- Data base. Broad possibility to store large amounts of informations about work done or in process.
GMM
Italy
Gmm S.p.A.
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Surface Processing Machines Slab Polishing Line Machine
FOB Price:
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
FEATURES
BASE
Monolithic high-thickness steel base electro-welded with rectified sliding surface.
INTERCHANGEABLE WEAR-PROOF SURFACES
Made with special steel (UBNW.1.446), thickness 3 mm, to guarantee planarity over time and facilitate maintenance.
SURFACE TREATMENT
All parts are treated inside our Company, with hand sand-blasting, cold galvanising and coating with bi-component epoxy base. On request, base and shoulders can be treated with Cataphoresis or hot dip galvanising. All screws are stainless steel.
3-BELT CONVEYOR
Driven by two large-diameter drums and inverter adjustable speed. Unique system to clean and lubricate the belt to ensure uniform sliding. The drive drum is coated with vulcanised rubber to prevent slipping and ensure flow smoothly.
SPINDLE HOLDER BEAM
Sliding on the shoulders fitted with roller cage in oil bath, protected by sealed stainless steel telescopic guards. Hardened steel sliding elements interchangeable and installed on the shoulders and bridge. The spindles are housed in the centre of the beam to ensure complete stability and eliminate any possibility of vibration.
BRIDGE TRANSLATION
With pinion and rack. Central gearmotor and antirotation bar with large diameter. Shifting speed controlled from inverter).
CALIBRATION UNITS
- Calibrator spindle made with heavy steel metalwork with rectified chromeplated sleeve, that slides through cast iron bushing to absorb vibrations during processing. On the spindle plate where it serves as a flywheel and is dynamically balanced, there are calibrator rings with diamond sectors installed on them (Ø 670-870-1050 mm). Electric drive can be 22 or 30 kW.
- An automatic system combined with motor absorption acts on conveyor speed, slowing it in case of excessive overload, making the spindle stop and automatically lift. The spindle is automatically repositioned with absolute precision when the operating cycle starts back up again. The calibrator is managed from the touch screen for all of its automatic and manual functions. Automatic positioning at the pre-selected height with centesimal precision.
POLISHING UNITS
- Cast iron polishing spindles, installed in the centre of the beam, with thick and rectified chrome-plated steel shaft, sliding on bronze bushing, complete with pneumatic cylinder for lifting abrasive carrier plate.
Each spindle is fitted with a pressure gauge to control pressure and counter-pressure to balance the head during the work.
- Motors. 7.5 or 11 kW motors with single or sequential start-up. Drive transmission through high-output pulleys and belts.
- Ø 470/510 aluminium alloy polishing plates complete with Frankfurt fittings for seven abrasives. They are equipped with a multidirectional shock absorbing system to ensure maximum operating homogeneity and efficiency of the abrasive.
- Automatic centralised lubrication system of the spindles with the possibility of setting quantities and intervention.
- Abrasive finished. The machine is equipped with a system to set the thickness of the piece being processed based on which, a sensor installed on each head, calls the attention of the operator to replace the abrasive, when finished.
- Slab-guide supports with screw movement through flywheel from a unique station, complete with stainless steel slab-guide.
- Material presence detection unit to control the automatic up/down movement of heads in case of discontinuity between pieces.
SAFETY AND PROTECTIONS
- Front PLT doors with interlocking limit switch to avoid opening before the spindles stop. Side and rear stainless steel guards, easy to inspect.
ELECTRONICS: THE "THINKING HEART" OF LMS
- Reliable. After careful testing, the parts are chosen from the leading companies in the specific sectors. To minimise the probability of failure or interference, a modern “can open” network system is installed on board, which drastically reduces the number of cables between sections.
- Software developed entirely by GMM, guaranteed over time, improvable and most of all customizable according to customer requirements.
- 12" Touch Screen. Interactive graphics for complete machine cycle management with start-up in sequence of spindles, conveyor motor and bridge motor. To manage spindle down/up based on piece presence.
To view the abrasive consumption status for each head.
- Data base. Broad possibility to store large amounts of information about work done or in process.
GMM
Italy
Gmm S.p.A.
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Surface Processing Machines Slab Polishing Line Machine
FOB Price:
Warranty: 12 Months
Usage: Marble, Limestone, Onyx, Sandstone, Travertine
Machinery Function Features:
FEATURES
BASE
Monolithic high-thickness steel base electro-welded with rectified sliding surface.
INTERCHANGEABLE WEAR-PROOF SURFACES
Made with special steel (UBNW.1.446), thickness 3 mm, to guarantee planarity over time and facilitate maintenance.
SURFACE TREATMENT
All parts are treated inside our Company, with hand sand-blasting, cold galvanising and coating with bi-component epoxy base. On request, base and shoulders can be treated with Cataphoresis or hot dip galvanising. All screws are stainless steel.
3-BELT CONVEYOR
Driven by two large-diameter drums and inverter adjustable speed. Unique system to clean and lubricate the belt to ensure uniform sliding. The drive drum is coated with vulcanised rubber to prevent slipping and ensure flow smoothly.
SPINDLE HOLDER BEAM
Sliding on the shoulders fitted with roller cage in oil bath, protected by sealed stainless steel telescopic guards. Hardened steel sliding elements interchangeable and installed on the shoulders and bridge. The spindles are housed in the centre of the beam to ensure complete stability and eliminate any possibility of vibration.
BRIDGE TRANSLATION
With pinion and rack. Central gearmotor and antirotation bar with large diameter. Shifting speed controlled from inverter).
CALIBRATION UNITS
- Calibrator spindle made with heavy steel metalwork with rectified chromeplated sleeve, that slides through cast iron bushing to absorb vibrations during processing. On the spindle plate where it serves as a flywheel and is dynamically balanced, there are calibrator rings with diamond sectors installed on them (Ø 670-870-1050 mm). Electric drive can be 22 or 30 kW.
- An automatic system combined with motor absorption acts on conveyor speed, slowing it in case of excessive overload, making the spindle stop and automatically lift. The spindle is automatically repositioned with absolute precision when the operating cycle starts back up again. The calibrator is managed from the touch screen for all of its automatic and manual functions. Automatic positioning at the pre-selected height with centesimal precision.
POLISHING UNITS
- Cast iron polishing spindles, installed in the centre of the beam, with thick and rectified chrome-plated steel shaft, sliding on bronze bushing, complete with pneumatic cylinder for lifting abrasive carrier plate.
Each spindle is fitted with a pressure gauge to control pressure and counter-pressure to balance the head during the work.
- Motors. 7.5 or 11 kW motors with single or sequential start-up. Drive transmission through high-output pulleys and belts.
- Ø 470/510 aluminium alloy polishing plates complete with Frankfurt fittings for seven abrasives. They are equipped with a multidirectional shock absorbing system to ensure maximum operating homogeneity and efficiency of the abrasive.
- Automatic centralised lubrication system of the spindles with the possibility of setting quantities and intervention.
- Abrasive finished. The machine is equipped with a system to set the thickness of the piece being processed based on which, a sensor installed on each head, calls the attention of the operator to replace the abrasive, when finished.
- Slab-guide supports with screw movement through flywheel from a unique station, complete with stainless steel slab-guide.
- Material presence detection unit to control the automatic up/down movement of heads in case of discontinuity between pieces.
SAFETY AND PROTECTIONS
- Front PLT doors with interlocking limit switch to avoid opening before the spindles stop. Side and rear stainless steel guards, easy to inspect.
ELECTRONICS: THE "THINKING HEART" OF LMS
- Reliable. After careful testing, the parts are chosen from the leading companies in the specific sectors. To minimise the probability of failure or interference, a modern “can open” network system is installed on board, which drastically reduces the number of cables between sections.
- Software developed entirely by GMM, guaranteed over time, improvable and most of all customizable according to customer requirements.
- 12" Touch Screen. Interactive graphics for complete machine cycle management with start-up in sequence of spindles, conveyor motor and bridge motor. To manage spindle down/up based on piece presence.
To view the abrasive consumption status for each head.
- Data base. Broad possibility to store large amounts of informations about work done or in process.
GMM
Italy
Gmm S.p.A.
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Surface Processing Machines Water Blast Machine
FOB Price:
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
StonDeck is an innovative and revolutionary bridge water firebox patented by Maem, which is able to make a rough finish on the natural stone of the slab surface thanks to the power of water under high pressure, up to 2000 bar. The water output is between 18 and 42 liters per minute. The possibility of using various types of water jets and the rotating head allows the machine to create straight lines, curved lines and a selected geometric shape. The three processing heads installed on the bridge can move in the following directions:
longitudinal guide for drawing lines along the length of the plates
transverse guide for drawing lines along the width of the plates
transverse + longitudinal for drawing squares on plates
diagonal guiding along the diagonals of both plates for drawing rhombuses
free running for drawing free-form drawings on plates
4-column bridge, allowing for the displacement of the processing heads, suitable for processing components with a maximum working width of 200 mm and a maximum working thickness of 500 mm
Maema
Poland
Euro Arss S.C.
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Surface Processing Machines Slab Polishing Line Machine
FOB Price:
Warranty: 12 Months
Usage: Marble, Limestone, Sandstone, Travertine
Machinery Function Features:
FEATURES
BASE
Monolithic high-thickness steel base electro-welded with rectified sliding surface.
INTERCHANGEABLE WEAR-PROOF SURFACES
Made with special steel (UBNW.1.446), thickness 3 mm, to guarantee planarity over time and facilitate maintenance.
SURFACE TREATMENT
All parts are treated inside our Company, with hand sand-blasting, cold galvanising and coating with bi-component epoxy base. On request, base and shoulders can be treated with Cataphoresis or hot dip galvanising. All screws are stainless steel.
3-BELT CONVEYOR
Driven by two large-diameter drums and inverter adjustable speed. Unique system to clean and lubricate the belt to ensure uniform sliding. The drive drum is coated with vulcanised rubber to prevent slipping and ensure flow smoothly.
SPINDLE HOLDER BEAM
Sliding on the shoulders fitted with roller cage in oil bath, protected by sealed stainless steel telescopic guards. Hardened steel sliding elements interchangeable and installed on the shoulders and bridge. The spindles are housed in the centre of the beam to ensure complete stability and eliminate any possibility of vibration.
BRIDGE TRANSLATION
With pinion and rack. Central gearmotor and antirotation bar with large diameter. Shifting speed controlled from inverter).
CALIBRATION UNITS
- Calibrator spindle made with heavy steel metalwork with rectified chromeplated sleeve, that slides through cast iron bushing to absorb vibrations during processing. On the spindle plate where it serves as a flywheel and is dynamically balanced, there are calibrator rings with diamond sectors installed on them (Ø 670-870-1050 mm). Electric drive can be 22 or 30 kW.
- An automatic system combined with motor absorption acts on conveyor speed, slowing it in case of excessive overload, making the spindle stop and automatically lift. The spindle is automatically repositioned with absolute precision when the operating cycle starts back up again. The calibrator is managed from the touch screen for all of its automatic and manual functions. Automatic positioning at the pre-selected height with centesimal precision.
POLISHING UNITS
- Cast iron polishing spindles, installed in the centre of the beam, with thick and rectified chrome-plated steel shaft, sliding on bronze bushing, complete with pneumatic cylinder for lifting abrasive carrier plate.
Each spindle is fitted with a pressure gauge to control pressure and counter-pressure to balance the head during the work.
- Motors. 7.5 or 11 kW motors with single or sequential start-up. Drive transmission through high-output pulleys and belts.
- Ø 470/510 aluminium alloy polishing plates complete with Frankfurt fittings for seven abrasives. They are equipped with a multidirectional shock absorbing system to ensure maximum operating homogeneity and efficiency of the abrasive.
- Automatic centralised lubrication system of the spindles with the possibility of setting quantities and intervention.
- Abrasive finished. The machine is equipped with a system to set the thickness of the piece being processed based on which, a sensor installed on each head, calls the attention of the operator to replace the abrasive, when finished.
- Slab-guide supports with screw movement through flywheel from a unique station, complete with stainless steel slab-guide.
- Material presence detection unit to control the automatic up/down movement of heads in case of discontinuity between pieces.
SAFETY AND PROTECTIONS
- Front PLT doors with interlocking limit switch to avoid opening before the spindles stop. Side and rear stainless steel guards, easy to inspect.
ELECTRONICS: THE "THINKING HEART" OF LMS
- Reliable. After careful testing, the parts are chosen from the leading companies in the specific sectors. To minimise the probability of failure or interference, a modern “can open” network system is installed on board, which drastically reduces the number of cables between sections.
- Software developed entirely by GMM, guaranteed over time, improvable and most of all customizable according to customer requirements.
- 12" Touch Screen. Interactive graphics for complete machine cycle management with start-up in sequence of spindles, conveyor motor and bridge motor. To manage spindle down/up based on piece presence.
To view the abrasive consumption status for each head.
- Data base. Broad possibility to store large amounts of informations about work done or in process.
GMM
Italy
Gmm S.p.A.
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Surface Processing Machines Slab Polishing Line Machine
FOB Price:
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Quartzite, Sandstone, Travertine
Machinery Function Features:
Number of Polishing Heads : 6/8/10/12/14/16 Pcs
Polishing Head Plate Diameter : 520 mm
Polishing Head Motor Power : 11 kW
Working Width : 2200 mm
Working Thickness : 8-80 mm
Machine Width : 2900 mm
Machine Height : 2400 mm
Ozteknik Makine
Turkey
Ozteknik Makine
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Surface Processing Machines Slab Polishing Line Machine
Warranty: 12 Months
Usage: Marble, Limestone, Sandstone, Travertine
Machinery Function Features:
FEATURES
BASE
Monolithic high-thickness steel base electro-welded with rectified sliding surface.
INTERCHANGEABLE WEAR-PROOF SURFACES
Made with special steel (UBNW.1.446), thickness 3 mm, to guarantee planarity over time and facilitate maintenance.
SURFACE TREATMENT
All parts are treated inside our Company, with hand sand-blasting, cold galvanising and coating with bi-component epoxy base. On request, base and shoulders can be treated with Cataphoresis or hot dip galvanising. All screws are stainless steel.
3-BELT CONVEYOR
Driven by two large-diameter drums and inverter adjustable speed. Unique system to clean and lubricate the belt to ensure uniform sliding. The drive drum is coated with vulcanised rubber to prevent slipping and ensure flow smoothly.
SPINDLE HOLDER BEAM
Sliding on the shoulders fitted with roller cage in oil bath, protected by sealed stainless steel telescopic guards. Hardened steel sliding elements interchangeable and installed on the shoulders and bridge. The spindles are housed in the centre of the beam to ensure complete stability and eliminate any possibility of vibration.
BRIDGE TRANSLATION
With pinion and rack. Central gearmotor and antirotation bar with large diameter. Shifting speed controlled from inverter).
CALIBRATION UNITS
- Calibrator spindle made with heavy steel metalwork with rectified chromeplated sleeve, that slides through cast iron bushing to absorb vibrations during processing. On the spindle plate where it serves as a flywheel and is dynamically balanced, there are calibrator rings with diamond sectors installed on them (Ø 670-870-1050 mm). Electric drive can be 22 or 30 kW.
- An automatic system combined with motor absorption acts on conveyor speed, slowing it in case of excessive overload, making the spindle stop and automatically lift. The spindle is automatically repositioned with absolute precision when the operating cycle starts back up again. The calibrator is managed from the touch screen for all of its automatic and manual functions. Automatic positioning at the pre-selected height with centesimal precision.
POLISHING UNITS
- Cast iron polishing spindles, installed in the centre of the beam, with thick and rectified chrome-plated steel shaft, sliding on bronze bushing, complete with pneumatic cylinder for lifting abrasive carrier plate.
Each spindle is fitted with a pressure gauge to control pressure and counter-pressure to balance the head during the work.
- Motors. 7.5 or 11 kW motors with single or sequential start-up. Drive transmission through high-output pulleys and belts.
- Ø 470/510 aluminium alloy polishing plates complete with Frankfurt fittings for seven abrasives. They are equipped with a multidirectional shock absorbing system to ensure maximum operating homogeneity and efficiency of the abrasive.
- Automatic centralised lubrication system of the spindles with the possibility of setting quantities and intervention.
- Abrasive finished. The machine is equipped with a system to set the thickness of the piece being processed based on which, a sensor installed on each head, calls the attention of the operator to replace the abrasive, when finished.
- Slab-guide supports with screw movement through flywheel from a unique station, complete with stainless steel slab-guide.
- Material presence detection unit to control the automatic up/down movement of heads in case of discontinuity between pieces.
SAFETY AND PROTECTIONS
- Front PLT doors with interlocking limit switch to avoid opening before the spindles stop. Side and rear stainless steel guards, easy to inspect.
ELECTRONICS: THE "THINKING HEART" OF LMS
- Reliable. After careful testing, the parts are chosen from the leading companies in the specific sectors. To minimize the probability of failure or interference, a modern “can open” network system is installed on board, which drastically reduces the number of cables between sections.
- Software developed entirely by GMM, guaranteed over time, improvable and most of all customizable according to customer requirements.
- 12" Touch Screen. Interactive graphics for complete machine cycle management with start-up in sequence of spindles, conveyor motor and bridge motor. To manage spindle down/up based on piece presence.
To view the abrasive consumption status for each head.
- Data base. Broad possibility to store large amounts of information about work done or in process.
GMM
Italy
Gmm S.p.A.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Surface Processing Machines Slab Polishing Line Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
FEATURES
BASE
Monolithic high-thickness steel base electro-welded with rectified sliding surface.
INTERCHANGEABLE WEAR-PROOF SURFACES
Made with special steel (UBNW.1.446), thickness 3 mm, to guarantee planarity over time and facilitate maintenance.
SURFACE TREATMENT
All parts are treated inside our Company, with hand sand-blasting, cold galvanising and coating with bi-component epoxy base. On request, base and shoulders can be treated with Cataphoresis or hot dip galvanising. All screws are stainless steel.
3-BELT CONVEYOR
Driven by two large-diameter drums and inverter adjustable speed. Unique system to clean and lubricate the belt to ensure uniform sliding. The drive drum is coated with vulcanised rubber to prevent slipping and ensure flow smoothly.
SPINDLE HOLDER BEAM
Sliding on the shoulders fitted with roller cage in oil bath, protected by sealed stainless steel telescopic guards. Hardened steel sliding elements interchangeable and installed on the shoulders and bridge. The spindles are housed in the centre of the beam to ensure complete stability and eliminate any possibility of vibration.
BRIDGE TRANSLATION
With pinion and rack. Central gearmotor and antirotation bar with large diameter. Shifting speed controlled from inverter).
CALIBRATION UNITS
- Calibrator spindle made with heavy steel metalwork with rectified chromeplated sleeve, that slides through cast iron bushing to absorb vibrations during processing. On the spindle plate where it serves as a flywheel and is dynamically balanced, there are calibrator rings with diamond sectors installed on them (Ø 670-870-1050 mm). Electric drive can be 22 or 30 kW.
- An automatic system combined with motor absorption acts on conveyor speed, slowing it in case of excessive overload, making the spindle stop and automatically lift. The spindle is automatically repositioned with absolute precision when the operating cycle starts back up again. The calibrator is managed from the touch screen for all of its automatic and manual functions. Automatic positioning at the pre-selected height with centesimal precision.
POLISHING UNITS
- Cast iron polishing spindles, installed in the centre of the beam, with thick and rectified chrome-plated steel shaft, sliding on bronze bushing, complete with pneumatic cylinder for lifting abrasive carrier plate.
Each spindle is fitted with a pressure gauge to control pressure and counter-pressure to balance the head during the work.
- Motors. 7.5 or 11 kW motors with single or sequential start-up. Drive transmission through high-output pulleys and belts.
- Ø 470/510 aluminium alloy polishing plates complete with Frankfurt fittings for seven abrasives. They are equipped with a multidirectional shock absorbing system to ensure maximum operating homogeneity and efficiency of the abrasive.
- Automatic centralised lubrication system of the spindles with the possibility of setting quantities and intervention.
- Abrasive finished. The machine is equipped with a system to set the thickness of the piece being processed based on which, a sensor installed on each head, calls the attention of the operator to replace the abrasive, when finished.
- Slab-guide supports with screw movement through flywheel from a unique station, complete with stainless steel slab-guide.
- Material presence detection unit to control the automatic up/down movement of heads in case of discontinuity between pieces.
SAFETY AND PROTECTIONS
- Front PLT doors with interlocking limit switch to avoid opening before the spindles stop. Side and rear stainless steel guards, easy to inspect.
ELECTRONICS: THE "THINKING HEART" OF LMS
- Reliable. After careful testing, the parts are chosen from the leading companies in the specific sectors. To minimize the probability of failure or interference, a modern “can open” network system is installed on board, which drastically reduces the number of cables between sections.
- Software developed entirely by GMM, guaranteed over time, improvable and most of all customizable according to customer requirements.
- 12" Touch Screen. Interactive graphics for complete machine cycle management with start-up in sequence of spindles, conveyor motor and bridge motor. To manage spindle down/up based on piece presence.
To view the abrasive consumption status for each head.
- Data base. Broad possibility to store large amounts of information about work done or in process.
GMM
Italy
Gmm S.p.A.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Surface Processing Machines Slab Polishing Line Machine
Warranty: 12 Months
Usage: Marble, Limestone, Onyx, Sandstone, Travertine
Machinery Function Features:
AUTOMATIC BELT POLISHING MACHINE FOR MARBLE SLABS
Thanks to CEMAR’s over twenty years experience in surface treatment of marble and granite, GMM present the most advanced version of LMS 2100 belt polishing machine for marble slabs. Respecting the philosophy that has always characterized the excellent CEMAR product, the new series of polishing machines for marble slabs is made using robust, accurate and reliable mechanics. In conjunction, the machine has advanced electronic and technology solutions to ensure maximum quality of work, high production yields and reduction of waste. All this ensure low running and maintenance costs, with high durability.
FEATURES
BASE
In sturdy electro-welded steel structure with rectified sliding plane covered with replaceable wear plates made of 3 mm thick special steel to ensure flatness and easy maintenance over time.
SURFACE TREATMENTS
All components are treated in our company with sandblasting by hand, cold galvanizing and painting with two component epoxy primer. On request, base and shoulders can be hot dip galvanized.
BELT
Pulled by two drums of large diameter. Speed adjustable by inverter. Two unique systems for cleaning and lubricating the belt to ensure flow smoothly.
BEAM
For spindle housing in a sturdy and rigid structure of welded steel. Sliding on the shoulders equipped with roller bearing in oil bath, protected by telescopic guards in stainless steel. Sliding elements made of hardened steel interchangeable and mounted both on the shoulders and on the bridge. The spindles are housed at the center of the beam to ensure complete stability and to avoid any possible vibration.
TRANSLATION OF THE BRIDGE
With rack and pinion. Starting from the version with 12 spindles, the transmission takes place with 2 gearmotors coupled at the bridge ends. Travel speed controlled by inverter.
POLISHERS SPINDLES
In cast iron, with thick chrome-plated steel grounded shaft, sliding on bronze bushes, complete with pneumatic cylinder for raising the abrasives carrying plates. Each spindle is equipped with a gauge for the control of pressure and counterpressure, necessary to balance the head during the working. The cooling water passes inside the shaft for a better and uniform distribution on the materials being processed.
MOTORS
11 kW/15 HP motors, with individual or in sequence start-up. Motion transmission with high performance belts.
ELECTRONICS: “THINKING HEART” OF THE LMS 2100
- Reliable. After careful controls, components are selected among leading companies in specific sectors (mainly Siemens or Schneider-Telemcanique).
- To make minimum the probability of failure or interference, on board of the machine is adopted modern network system "can open" which drastically reduces the number of cables between one section and the other.
- Software. Developed entirely in GMM, guaranteed over time, especially improved and customized according to customer requirements.
- Inverters. The roller conveyors and specific rollers in the entry are handled by inverters, like all the other moving parts, to balance the fl ow of material and optimize the speed of each step.
- Optical detector 120 photocells, to scan in a sequence the shape of entering slabs, done in RS485 protocol (noise free), it transmits the shape of the slab to the control unit to better manage the ascent and descent of the heads, according to the various selectable working cycles.
- Ultrasonic sensor, positioned at the entrance, to detect the material thickness. Enables fully automatic management of the abrasives consumption of each single head.
- Automatic lubrication management, for planning the quantity of lubricant to be dispensed and the dispensing times.
- Touch Screen 12". Monitor with "easy to use" interface, interactive graphics for the complete management of the machine cycle with sequential startup spindle motors, belt and bridge motors. It drives the spindles up-down stroke according to the shape of slabs. Display of abrasive consumption status for each head.
- Data base. Large possibility to store various information about the work done or in progress.
GMM
Italy
Gmm S.p.A.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Surface Processing Machines Stone Sandblasting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
STL / A 1500 SHOT GUN
This machine is particularly suitable for shot blasting concrete, agglomerate, marble, stone, granite and other neutral materials of various shapes and sizes.
Main characteristics:
* Shot blasting only on the upper outer surface of parts and on the side of parts as an option
* Operated with a turbine system with centrifugal ejection of steel shot.
* Closed mesh metal mesh mat.
* The speed of the mat is regulated by the control board.
* Turbine speed adjustable by control board.
Cogeim Europe
Poland
Euro Arss S.C.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Surface Processing Machines Bridge Polishing Machine for Slabs
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Helios Lux is the fastest and most efficient bridge polishing machine with an automatic tool change in the market. It is a sturdy machine, which preserves its quality over time (no rust), entirely built with stainless steel both in the structure and the fixing bolts. Thanks to the automatic tool changer it is possible to polish and brush all types of materials (granite, onyx, quartz, etc.) without the manual intervention and with excellent results. The working head, developed by our engineers, allows to have a constant pressure control and to work also on not perfectly flat surfaces, thus saving the 50% on the use of abrasives. Helios Lux can work on multiple slabs (also different for shape and thickness) over the working table during a unique polishing cycle without blocking the machine or interrupting the process. The integrated X-Touch software and the system Helios Photoscan for the slab scanning and measurement make a polishing cycle very easy, intuitive, and fast.
"With the Helios technology, our customers save 50% on the abrasives!"
HELIOS
Italy
Helios Automazioni Srl
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Surface Processing Machines Single Head Polishing Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Travertine
Machinery Function Features:
Helios Lux is the fastest and most efficient bridge polishing machine with an automatic tool change in the market. It is a sturdy machine, which preserves its quality over time (no rust), entirely built with stainless steel both in the structure and the fixing bolts. Thanks to the automatic tool changer it is possible to polish and brush all types of materials (granite, onyx, quartz, etc.) without the manual intervention and with excellent results. The working head, developed by our engineers, allows to have a constant pressure control and to work also on not perfectly flat surfaces, thus saving the 50% on the use of abrasives. Helios Lux can work on multiple slabs (also different for shape and thickness) over the working table during a unique polishing cycle without blocking the machine or interrupting the process. The integrated X-Touch software and the system Helios Photoscan for the slab scanning and measurement make a polishing cycle very easy, intuitive, and fast.
HELIOS
Italy
Helios Automazioni Srl
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Surface Processing Machines Arm Polishing Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Quartzite, Sandstone, Travertine
Machinery Function Features:
Description:
ARM: Two-speed column polishing machine with electrically-operated raising and lowering. System with pneumatic piston and pressure adjustment for polishing marble and granite, or for brushing or rotary bush hammering with plate.
SPECIFICATIONS
extremely thick cast iron base to guarantee necessary rigidity and resistance to potential vibrations
extremely thick hardened and tempered steel column to guarantee precision movement, protected by bellows cover
rear arm connected to the column on one side and to the other arm, by way of a hinge, on the other side; it is raised or lowered by way of a lifting screw coupled to a safety nut attached to it; the sliding column can also be adjusted
front arm with function of supporting the spindle and its transmission
manual pump located on front-left side to lubricate sleeve and spindle
Campagnola e Fedeli Srl
Italy
Campagnola e Fedeli Srl
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Surface Processing Machines Single Head Polishing Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Travertine
Machinery Function Features:
Automatic surface grinder FSA 561 WZW
Automatic surface grinding machine with tool change
The FSA 561 WZW automatic surface grinding machine with automatic head change is a true all rounder for calibrating, matt grinding, polishing, brushing and disc blasting all common materials, whether granite, composite material, limestone, marble or sandstone. Hundreds of machine prove themselves for decades in use and stand for perfect results and reliability.
weha
Germany
Weha Ludwig Werwein GmbH
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Surface Processing Machines Single Head Polishing Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
SINGLE-HEAD SLAB POLISHING MACHINE TIPO MONO SP: is a single head slab polishing machine. Machine can be equipped both with marble and granite head (optional). Its portal structure enables a very high stability while processing.
The waterproof electric main box is integrated in the machine’s structure and it is located on the bridge left side. In the same area a small platform is set, which may transport operator during working process. Operator’s panel with all its controllers is located on the main electric box. All controllers can be reached by operator easily. Operator’s panel is equipped with a touch-screen terminal, which allows all working parameters managing
The soft-ware has been projected properly for such a kind of machine. Slabs’ shape’s scanning and storage are executed by operating spindle positioning. Soft-ware allows the choice of 4 different working cycles, and the number of each cycle’s repetition. Once the proper working cycle has been chosen, then machine ends automatically (without operator) the slab processing. Machine safety is assured by safety limit-switches and metallic and nylon safety protection. Machine is projected and manufactured according to EEC standards.
OPTIONALS
Elevated track metallic supporter
5 position automatic tool change
Campagnola e Fedeli Srl
Italy
Campagnola e Fedeli Srl
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Surface Processing Machines Arm Polishing Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Quartzite, Sandstone, Travertine
Machinery Function Features:
Hand Polishing Machine-H1
Machine in column design for the surface processing of natural stone and cast stone, especially also for grinding and polishing granite.
motorized height adjustment (Z-axis: 700 mm)
quick tool change
for processing panels 2800x1000 mm
Material thicknesses from 10 mm to 450 mm possible
Dimensions (LxWxH): 3000x2300x1800 mm
Motor power 7.5 kW
with pneumatic pressure
weha
Germany
Weha Ludwig Werwein GmbH
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Surface Processing Machines Bush Hammering Machine
$25000-45000
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Stone bush hammer machine marble granite bush hammer machine with6/9/12-head is your ideal machine to process litchi surface with high production, easy operation and perfect result. The head is adjusted automatically with same depth, lower cost and lower breakage rate. Different size, irregular shape or thin slab with 10mm are all acceptable to process litchi surface.
ZT
China
Zest Machine
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Surface Processing Machines Stone Brushing-Aging Machine
Warranty: 12 Months
Usage: Marble, Limestone, Sandstone, Travertine
Machinery Function Features:
Automatic Surface Pitching Machines
It is the world’s most serial blasting stone manufacturing machine.
The appearance surfaces of natural stone, marble, travertine, brick, tile, lock stone and other materials gives the appearance of a tree that has been flamed and hammered or cut off in the vertical bark.
Conveyor belt speed can be adjusted up to 0-3,5m/min.
Processing engine power can reach up to 2.2 kw.
With the machine;
-Tool sets for four different dimensions that customer will use (shown in table)
-Measure adjustment silvers,
-Measure adjustment mountings,
-Measure cutting devices are supplied.
Automatic Liquid Lubrication System
Automatic surface broken machine, cutter head bearings and all working on each other are lubricated with automatic lubrication from the central system.
In the automatic liquid lubrication system, when the liquid oil falls below a certain level, the machine automatically shuts itself off and doesn’t work until the oil chamber is re- filled with supplemental oil.
Serial Production With Yp-200
At the entrance and in the machine, adjustable stone printing systems are available in the automatic surface broken machine. 5, 7.5, 10, 15, 20 cm (optional) surface width Stones are produced by the machine for decorative purposes. In order for the machine to perform mass production, the stone thickness should be at least 1/3 of the surface width (the type of stone, hardness-softness-dry etc.). During the duplicate production phase, natural or artificial Stones are given to the machine and the surface flapping process is taken out of the machine in the finished way. During the broken, the waste is placed under the machine and the machine’s integrated wheelbarrow can be dropped on its own and easy to clean. As a duplicate production target, Toksel Makine Automatic Surface Broken Machines have stone printing systems.
TOKSEL MACHINE
Turkey
TOKSEL MACHINE LTD.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Surface Processing Machines Vibratory Tumbling Machine
Warranty: 12 Months
Usage: Marble, Limestone, Quartzite, Sandstone, Travertine
Machinery Function Features:
It is used to round the sharp edges of the marble and to give the old surface effect.
This process provides vibration to move with the vibration.
TOKSEL MACHINE
Turkey
TOKSEL MACHINE LTD.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Surface Processing Machines Stone Sandblasting Machine
$25800-36000
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Trough type Stone marble granite surface roller conveyor shot blasting machine is mainly used for marble,granite, simple components, small casting surface cleaning to remove surface rust, dirt, scale, sand casting, so that the workpiece to play rust, decontamination, strengthen clear the role of the sand, to improve the fatigue strength of the workpiece, and ultimately improve the surface and internal quality purposes.
ZT
China
Zest Machine
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Surface Processing Machines Stone Sandblasting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Sandblaster Cemetra
Our mobile sandblaster for blasting letters in the workshop or directly at the cemetery.This unit is not suitable for stationary operation in the workshop to carry out deep blasting work over a longer period of time. The unit is intended as a mobile unit for changing locations (cemetery, etc...) for work up to a blasting depth of approx. 3 mm. For deeper blasting, as well as stationary blasting, we refer to our pressure blasting units of the types Titan, Oberon or Hurricane.
including vacuum cleaner
weha
Germany
Weha Ludwig Werwein GmbH
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Surface Processing Machines Stone Sandblasting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Sandblaster Titan Kompakt
New Generation - The all-round talent for the cemetery and workshop. Also for deep-blasting suitable.
additional cyclone separator for effective separation of the dust particles from the blasting material
Low abrasive consumption through closed circuit
powerful vacuum cleaner
dust-free sand-blasting unit in mobile version
Beam depth up to a maximum of 10 mm in granite
Quick-release valve
Safety switch
weha
Germany
Weha Ludwig Werwein GmbH
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Surface Processing Machines Stone Sandblasting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Automatic sandblasting bridge "OPTIMO"
For a more rational sandblasting.
fully automatic control
easy to use
absolutely uniform steel image
subsequent connection of existing steel equipment is possible
A time-controlled switch-off for maintaining the pressure peaks is intregrated for the pressure peaks.
weha
Germany
Weha Ludwig Werwein GmbH
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Surface Processing Machines Slab Polishing Line Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
The oscillation of the bridge of a traditional polishing machine that moves several spindles at the same time represents a limit especially for irregular slabs. For this reason, SIMEC presents to the polishing market the ORBITAL series featuring an oscillating and independent movement of each spindle. As a matter of fact, in the ORBITAL polishing machines there is no longer a single oscillating bridge but several bridges on which the spindles move individually making movements on different axes, similar to the ones performed by a manual processing and above all perfectly reaching the edge of the most irregular slabs without having to lift the other heads and in this way tools totally spend more time on the material.
SIMEC
Italy
Simec S.p.A.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Surface Processing Machines Slab Polishing Line Machine
Warranty: 12 Months
Usage: Marble, Limestone, Onyx, Sandstone, Travertine
Machinery Function Features:
The HPM 2200 RS machines are high performance polishing machines for marble slab, deriving from the granite version NP RS, from which they inherit most of the technological solutions.
Many customers has recently installed a new polishing line for marble and limestone slabs. In addition to the high performance new polishing machine HPM RS for marble and limestone slabs, the line is equipped with automatic loader mod. FINGER and with the automatic unloader robot mod. RAPID.
SIMEC
Italy
Simec S.p.A.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Surface Processing Machines Single Head Polishing Machine
$12000-18000
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Esuton EDTM type single head stone polishing machine is one automatic stone polishing machine, it has wide range of applications, it can be used to polish granite, marble, quartz stone slab, marble, terrazzo tile and so on.
This machine was controlled by PLC automatic working system it can move and polish automatically, the polishing way has horizontal, vertical and ring three moving model to meet different polishing requirements.
Worktable: for big slab the worktable can do 0-85 tilt for easy load slabs.
Polishing Head Lifting: the polishing head lifting is controlled by pneumatic cylinder, the pressure is adjustable according different stone.
Forward And Backward Way Beam: use linear guide rail to ensure cutting precision, inside use oil to avoid wear, on the top has belt to against dust. The moving speed is adjustable.
ESUTON INDUSTRY
China
YANTAI ESUTON INDUSTRY CO.,LTD
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Surface Processing Machines Stone Sandblasting Machine
$20000-98000
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Stone concrete brick cement terrazzo tile kerbstone shot blasting machine,stone tile brick kerbstone surface treatment machine
ZT
China
Zest Machine
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Surface Processing Machines Slab Polishing Line Machine
Warranty: 12 Months
Usage: Marble, Limestone, Sandstone, Travertine
Machinery Function Features:
Polishing machine for marble slabs, available with heads from 4 to 16, equipped with a 9.2kW motor for each spindle and with working pressure control fitted on each polishing head. The control panel has a wide display to ensure complete control of the machine. LM 2100 RS is available also in the combined version for polishing slabs and calibrating and polishing strips and/or tiles. The calibrating is carried out by rotating plates having a diameter of up to 1100 mm, which can be equipped with diamond tools and installed in a fixed position at the entry of the polishing machine.
SIMEC
Italy
Simec S.p.A.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Surface Processing Machines Slab Polishing Line Machine
Warranty: 12 Months
Usage: Marble, Limestone, Onyx, Sandstone, Travertine
Machinery Function Features:
The perfect polishing of marble slabs on industrial scale requires a modern line equipped with state-of-the-art technologies.
Pedrini is able to provide the most complete solutions ensuring high production performances, high degree of the polishing quality with low costs of operation and maintenance.
Pedrini polishing lines for marble slabs are designed, manufactured and installed to meet every requirement of each customer
Each polishing line is set according to the available spaces and is customized thanks to the use of a wide range of options, machines and auxiliary equipment designed to meet any kind of production need and automation level.
The polishing machine Galaxy B220MA is the basic machine in the polishing lines proposed by Pedrini.
All components have undergone structural inspection trough the FEM (Finite Element Method). The structural components surfaces are protected with three coats applied after sandblasting, while the small parts have undergone a cataphoresis corrosionproofing treatment.
The strong base, built in normalized steel work with large thickness longitudianl and transversal elements, has been further stiffened through continuous sloped structures that protect conveyor belt lower route by conveying water and eventual waste directly to ground.
All surfaces matching the upper structures have been machined through one sole positioning on the tool machine to achieve perfect units coupling.
The multi-clothe anti-slip conveyor belt is controlled by two large diameter rolls: a traction roll powered through an epicyclical gear motor, an idle roll equipped with tension devices.
Mobile beam, in heavy steel work, is designed as a sole body with a very rigid closed section. The beam slides in oil bath on hardened and ground large diameter rolls into housings, that are protected through fixed labyrinth guards, inside the bridges. Beam transversal movement is controlled by two gear motors, synchronized through a connecting shaft, which drive two helical tooth pinions tempered and ground with two racks fixed on the bridges.
Two special devices constantly lubricate with oil the contact between pinion and racks.
Two adjustable rolls units control mobile beam longitudinal position and contrast spindle vertical push working on hardened guides fixed onto bridges outer sides.This technology allows for very smooth beam transversal movement because it clears racks and pinions from vertical stress and renders pulling, instead of pressing, conveyor belt longitudinal action.
Pedrini
Italy
Pedrini S.p.a. ad Unico Socio
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Surface Processing Machines Slab Polishing Line Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Sandstone, Travertine
Kamhan Industrial Limited
Pakistan
Kamhan Industrial Limited
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Surface Processing Machines Slab Polishing Line Machine
Warranty: 12 Months
Usage: Marble, Limestone, Onyx, Sandstone, Travertine
Machinery Function Features:
The NPM polishing machines are available also in the combined version for calibrating and polishing of marble slabs. The first mobile bridge (PM version) installs calibrating spindles, capable of calibrating the useful working width, the second bridge installs honing spindles, the number depending on the version, for total honing/polishing of the width working efficiency of 2150 mm.
SIMEC
Italy
Simec S.p.A.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Surface Processing Machines Slab Polishing Line Machine
Warranty: 12 Months
Usage: Marble, Limestone, Onyx, Sandstone, Travertine
Machinery Function Features:
The LM 2100 RS is available in the combined version for polishing slabs and for calibrating and polishing strips and/or tiles. The calibrating is performed by special spindles that can be equipped with diamond tools with useful working width of 650 or 1000 mm according to the version. The calibrating spindles are installed at a fixed position at the entry of the polishing machine while the dressing spindles are installed on a mobile bridge and can operate on a useful width of 2100 mm.
SIMEC
Italy
Simec S.p.A.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Surface Processing Machines Slab Polishing Line Machine
Warranty: 12 Months
Usage: Marble, Limestone, Sandstone, Travertine
Machinery Function Features:
The HPM polishing machines are available in the version for strips, with useful working width of 650 or 1000 mm and are supplied in combined solutions for calibrating and dressing-polishing. The spindle of the HPM polishing machines can house plates 580 mm. in diameter. The calibration takes place with rotating plates equipped with diamond tools., installed in a fixed or mobile position.
SIMEC
Italy
Simec S.p.A.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Surface Processing Machines Single Head Polishing Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
The machine, that runs on rails and is equipped with one operating spindle, polishes slabs placed lengthwise on a cement supporting table. The machine can be easily loaded with a forklift since one side of the cement table is free. Once the working cycle ends, the machine automatically goes back to the starting position.
SIMEC
Italy
Simec S.p.A.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Surface Processing Machines Single Head Polishing Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
The machine equipped with two spindles, slides on rails while the material to be polished is placed on a cement surface. The finishing of slabs takes place in different passages, replacing the abrasives (with increasingly thinner grains) at each passage. Once the working cycle is concluded, the machine automatically goes back to the initial position. Thanks to the absence of barriers on the operator’s side of the machine, the loading and unloading operations of the material turn out to be especially easy.
SIMEC
Italy
Simec S.p.A.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Surface Processing Machines Single Head Polishing Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
The machine slides on rails and is equipped with one or two spindles according to the version, both versions are on concrete shoulders. The finishing of slabs takes place in different passages, replacing the abrasives (with increasingly thinner grains) at each passage. The NPK models differ from the NP1 and NP2 models for the loading of slabs that can be done exclusively by cranes or overhead cranes.
SIMEC
Italy
Simec S.p.A.
Contact Supplier
Have a Question? Ask our expert
Ask now
Questions & Answers on Travertine Surface Processing Machines
What kind of rocks should not be tumbled?
Posted by Visitor
Reply to this question
Post ReplyCancel
Any rock that has a grainy, gritty, or sandy texture should never be used as tumbling rough. Good tumbling rough will consist only of rocks with a smooth, non-granular texture. When the rocks are broken the surfaces should be smooth to the touch.
Answered by StoneContact
Like
Hot Product
