PRO - V 1800 PLC Automatic Standard Edge Cutting Machine

The machine, which is mounted on a steel chassis, has a closed and oil reservoir rail system, and the speed control and the dimensions given with the desired cut precision cuts.
Saw speed and car speed tab is the target of the desired cut, while the target is to exit at high speed
Fully Steel is Used on the Side Cutting Machine with Wagon, Anti-Rust Epoxy Paint Reinforcement, Special Transmission Rail System Closed Slide is Supported with Water-Free Protective Guards.
Our machine works with the help of cutting 90 degrees and 45 degrees reducers.
Flat Water Motor Has Been Used On Our Machine Head Cutting Up Down Inner Shell System Using Special Materials To Provide Precise Cutting In Bridge Cutting Machines, It Serves As A Sliding Coupling.
Our Wagon Side Cutting Machine is Designed as Both Cutting Sizing and Side Sizing.
Our machine Head rotation folk movement (C axis) is Manual
Our machine is 45 degree movement manual with reducer
Our machine is Slide Movement (Y axis) AUTOMATIC / Manual
Our machine is WAGON Movement (X axis) AUTOMATIC / Manual
It can be used both manually and automatically.
Head System is fixed at 45 degrees by cutting 0 to 90 degrees.
The Machine Has Been Made Completely Steel NPL-U
With the help of a reducer, it provides speed controlled automatic cutting.
Information on the materials used in the machine
Electric Motors: Reducers
* Motorized Gearbox for Slip Ways (Transmission 0.75 gamak motor transmission)
* Piston Sliding Motorized gearbox (Transmission 0.75 gamma motor gearbox)
* Motorized transmission for transport wagon movements (Transmission between 0.75 motorized transmission)
* Gear box for 45 degree cutting movements (Flywheel / Gear Box)
* Straight waterproof motor for marble and granite cutting works (9.3 kW 1500/3000 double rounded peasant motor)
Movement / Walking Systems:
* 0.5 '' steel gear mechanism for transport wagon movement
* Head cutting motion system with the help of trapeze.
* Cable transport systems, sliding paths are applied on the motion functionality.
* Transport wagon Closed sliding track walking equipment is provided with transmission crank.
Steel Construction of the Machine
* Side cutting machine is steel monoblock and massive.
* The chassis is made of 320 NPLU material.
* The transport wagon is designed from 80 X 20 material.
* The carrier wagon also has a steel chassis and is processed in 6 axes on CNC machines.
* The rear tower is made of 10 mm thick solid sheet metal and designed to reduce the vibration of the machine.
* Top slide ways are processed from 10 mm solid sheet metal to 8 mm between the grid in CNC machines.
* Wagon parts, wagon wheels are made of chiffon gg50 alloy to resist wear.
* Piston System is solid steel thick pipe.
* All head cutting group parts are cleaned in the milling machine.
* Head group parts are covered with anti-corrosion and rusty parts.
…… .. …… .. WORKING PROCEDURE OF THE MACHINE ………………
Periodic maintenance of the machine should be done daily, weekly and annually.
Lubrication of critical parts of the machine should be done regularly. (such as hubs of pressure impellers, slide ways, engine lubrication pump, etc.)
In case of problems caused by poor maintenance or lack of maintenance, the buyer company covers the repair and repair costs.
Our company provides technical support as soon as possible depending on the conditions.
In case of any malfunction or incorrect operation depending on the user, any intervention will be performed after an expert inspection on the machine.
It is under warranty for 1 year.
It is the buyers' duty to supply on-machine cutting saws.
The machine's consumables are not covered by the warranty. (such as cut-off saws)
Accommodation and transportation costs of the assembly team belong to the buyer company.
… ..…. ACTIONS THAT MUST BE TAKEN BY YOUR PARTY DURING THE INSTALLATION PHASE… ...
An electrician is required for the installation of the cable connections to provide 13 kW of electricity near the fuse board of the machine.
To provide plumbing next to the machine.
Cutting saws must be provided on the installation.
Required space for machine installation: 7000 mm X 3000 mm X 2500 mm (height)
One can of machine oil (30 size), one can of Grease.
Marble Side Cutting ...