PRO-D 3000 Full Automatic 3 Axis PLC Edge Trimming - Cutting Machine with Hydraulic Work Table

The machine, mounted on a steel frame, has a closed and oil reservoir rail system, with Linear Slide Kremier Transfer. The desired cut with the measurements given with the speed control makes precise cutting.
(AUTOMATIC) System Is Switched To Automatic Mode, The Barrel Moves Down Manually, The Wagon Starts To Cut The Stone, The Wagon Stops The Wagon Waits For The Head.
(SEMI-AUTOMATIC) Sizing values ​​are entered on the screen. The system is taken to the sizing mode, the dimensions of the stone are entered, the hive moves automatically downward, the wagon starts to cut the stone, the hive is raised automatically when the wagon comes out of the ship, the wagon comes to the beginning. BiteR when the menstruation is complete
(XY FULLY AUTOMATIC) It is taken to the screen in full automatic mode, XY values ​​are entered. The length of the parts to be cut is entered, the number of the parts, the dimensions are written, the hive moves automatically downwards, the car moves automatically, the stone starts to cut, the barrel automatically rises up when the wagon comes off, the wagon comes to the head tower counts the skid gauge and The Hive Retracts The Cutting (X AXIS When Cutting Is Finished, The System Turns Its Head Automatically, It Starts To Diminish The (Y) Minus In This Way, It Continues Up To The Plate Bit.
Fully Steel is Used on the Side Cutting Machine with Wagon, Anti-Rust Epoxy Paint Reinforcement, Special Transmission Rail System Closed Slide System is Purified from Water, LİNER RAIL, Protective Bellows System is Integrated.
Our Machine Cutting 90 degrees and 45 degrees Reducer Works Automatically.
Flat Water Motor Has Been Used On Our Machine Head Cutting Up Down Inner Sleeve System Compare In Bridge Cutting Machines By Using Special Materials To Provide Precise Cutting, It Serves As A Sliding Coupling.
Our Wagon Side Cutting Machine is Designed as Both Cutting Sizing and Side Sizing, XY Sizing with full size system.
Our machine Head rotation circular movement (C axis) is AUTOMATIC
Our machine is AUTOMATIC with 45 Degree movement reducer.
Our machine is Slide Movement (Y axis) AUTOMATIC / Manual
Our machine is WAGON Movement (X axis) AUTOMATIC / Manual
Both Manual, Automatic, Semi-Automatic. Fully Automatic, Usable.
Head System is fixed at 45 degrees by cutting 0 to 90 degrees.
With the help of a reducer, it provides speed controlled automatic cutting.