MB11A Multifunctional Straight Edge Up And Down Chamfering Machine

PLC

Features:

-11 heads

-Three pillars

-Motor electric adjustment front and rear, up and down

-The grinding wheel of this machine adopts water grinding disc, equipped with snail buckle joint, frequency conversion speed regulation, No. 1 and No. 2 forming motors 4.5 kW, No. 3, 4, No. 5, and No. 6 fine polishing motors 3 kW (No. 1-6 motors are placed vertically, processing The bottom is flat and polished, can move the stone front to process the corner line, and the edge groove is polished), the upper chamfer motor No. 7, 8, 9, 10 motor 3 kW (7-10 motor 45 degrees inclined, processing Stone, rock slab front chamfering), No. 11 motor back cut 7.5 kilowatts (No. 11 motor 45 degrees inclined, installed with a diameter of 300 saw blades to process rock slabs, stone and other materials back cut without leaving), various flat stones can be ground according to different sizes and thicknesses of stone and rock slabs，The right angle bottom edge of the rock slab, the drawing groove with polishing, the straight edge is thickened, the straight bottom edge is chamfered at 45, the small R round belt with polishing, the grooving with polishing, the kicking line, the anti-skid groove, the French edge, the straight edge, the edge and the corner are formed and polished，The rough grinding, fine grinding, and polishing processes are completed at one time. The brightness after processing is higher than that of the bright cutting of the board surface. The back cut and the bottom belt are polished at one time. The structure is advanced and reasonable. The front and back of the motor can be adjusted electrically to avoid manual wheel change slow speed, many links and complex operators, workers are unwilling to change wheels, slow wheel changes appear. High precision, fast efficiency, easy operation, simple maintenance. During the grinding process, the feed speed and progress can be adjusted electrically by pressing the lift switch. The maximum amount of processing is 3m/min. The normal use of the machine is equivalent to the workload of 15 persons in the normal stone processing, and the process defects caused by the workers during processing are eliminated.