Slate Chamfering,Beveling Machine

The grinding wheel of this machine adopts water grinding plate and is equipped with snail buckle joint. According to the different size and thickness of the stone, grinding all kinds of flat stone straight Angle bottom, thickening straight edge to see light, right Angle bottom 45° chamfering, straight edge forming, crabapple corner back cutting (the first and second motor can be configured with saw blades, back cutting and bevel grinding can be completed at one time), polishing (rough grinding, fine grinding, polishing) process is completed at one time. The brightness after processing is higher than the surface brightness...

-8 heads double pillars
-Electric adjustment motor the electric adjustment motor moves back and forth, lifts
-The grinding wheel of this machine adopts water grinding disc, equipped with a snail buckle joint, frequency conversion speed regulation
Features:
The machine is variable frequency speed regulation, No. 1, No. 2 forming motor 5.5 kW, No. 3, No. 4 polishing motor 4 kW, No. 5 motor 3 kW (1-5 good motor flat), No. 6 motor 3 kW (vertical), the motor can be moved to the smooth surface of the plate to process the stair anti-skid groove, or it can be moved to the bottom of the stone to process the flat edge to remove the wire), the 7th, 8th fine polishing motor 3kw, (the 7th-8th motor is flat) motor The machine base independently researches and develops a single guide column structure, which can be locked after adjusting the position of the grinding wheel motor. It can be equipped with an 18cm diameter grinding wheel, and the guide rail can be lifted and lowered synchronously. According to different stone sizes, the thickness is less than 8 cm and the height is more than 6 cm. Grinding various flat stone sizes Round edge, French edge, R round belt side throw, stair opening, anti-skid belt, polishing belt, linear shape completed at one time, grooved polishing Slotted polishing is counted as all kinds of special-shaped edges, rough grinding, fine grinding, and polishing processes are completed at one time, and the brightness after processing is high. Due to the brightness of the board surface and the wear and tear of the polishing grinding wheel, the grinding wheel can electrically adjust the abrasive lifting during the operation process to compensate. The structure is advanced and reasonable, the precision is high, the efficiency is fast, the operation is convenient, the maintenance is simple, and the feeding can be adjusted during the grinding process. The speed and the amount of processing, the maximum processing of 5m/min, and the normal use of the machine are equivalent to the normal stone processing of 15 people's workload, and to eliminate the process defects caused by workers during processing.
Technical parameters:
Feed Output Speed 0.8m-5m/min
The Minimum Processing Size of Stone 10-60mm*60mm
Total Power 36KW
Body Weight 3100KG
Boundary Dimensions 7300mm*1100mm*2000mm

Stone slab chamfering machine is suitable for chamfering marble and granite slab. Main motor drives blade to rotate. Worm-wheal reductor drives gear and rack meshinging to make blade feeding along the linear guide rails .Cutting speed can be ajusted by frequency inverter.

QLX1200 Double-end Chamfering Machine is an excellent equipment improved on the basis of a single head chamfering machine. According to NC programming, rough grinding and polishing can be completed with pneumatic device. The size range of its R angle is 10 ~ 50mm, and the angle of abrasive tools can be changed. It is widely used in the processing of rock board furniture and rock board coffee table. The control system adopts PLC programming combination as the control system, which is controlled by the special electric cabinet. The input power supply is three-phase AC voltage, the voltage is 380V / 50Hz, and the solenoid valve circuit is DC24V; The PLC display screen is used to operate the screen, which is simple and convenient to operate.

Good quality, good reliability, and 75% cheaper than Italian ones, our 14 Grinding Heads Big Transformers Super Double Chamfering Machine can produce tiles, stones and other materials with a thickness of less than 8 cm and a height of more than 5 cm. The processing speed is about 2 meters per minute.
Our chamfering machines have also before been sold to USA, UK, France, Vietnam, Afghanistan, Kazakhstan, Algeria, and Dubai.

Our 11 Grinding Heads Multi-Functional Automatic Straight Edge Chamfering Machine is the most cost-effective option.