Artificial Stone Polishing, Calibration Machine in China

Glass, Sintered Stone, Ceramic, Porcelain High Speed Straight Line Double Edging and Polishing Machine is an economical, efficient and practical glass rock plate ceramic deep processing equipment, suitable for grinding, cutting flat plates of different sizes and thicknesses, rough grinding, fine grinding and polishing of the bottom edges and the upper and lower corners of each side of the plate can be completed in one processing work, which is suitable for mass and large scale production.

JTM polishing machine is PLC controlled full automatic equipment. Can be used to polish all kind of stone slabs include quartz slab, granite slab, ceramic , marble slab etc. The polishing machine is equiped with 6 pieces T2 abrasive 170mm length, total dia is 560mm for each polishing head.

Y Series Swing Type Sintered Stone, Ceramic, Porcelain Glazing Machine features:
* Automatic glazing machine with the stainless steel cabinet.
* The bottom of the cabinet is equipped with anti-spatter filter to prevent the glaze from rebounding and splashing to the bottom of the tile.
* Four/six sets of high precision and high speed servo motor(running speed up to 150m/min) can be used to control back and front swing head control separately. Two-bar slide rail, light aluminum swing head frame (when swing travel in 1700mm, the fastest back and front only 1.8s)
* Original imported pump, glazing pressure 10 bar to 25 bar, good atomization effect, large quantity, uniform, smooth glaze on the surface of tile, the same amount of glaze inn each position in the cabinet, the glaze error of the whole tile is+/- 1g.
* Central air purification cabinet, the top of the main glaze spraying cabinet has 8 evenly distributed mist suction inlet connected to the first level of mist absorption network between the purification cabinet, to achieve the function of separating and purifying mist and water in the cabinet.
* Touch screen interface, easy to operate, real time monitoring of each set of spray gun running speed, travel distance, pressure, working speed etc. setting.
* Optional with automatic cleaning function inside the cabinet.

Quality Material:JTM use high strength steel to weld the body of the calibration machine to make sure the machine is strong enough.
Easy Operation And Maintenance:The calibration machine is with very simple design, so the operation and maintenance of the machine are simple and convenient.
High Efficiency:JTM calibration machine is equipted with heavy duty calibration head with high efficiency
Automation:PLC controlled automatic calibration machine.

YAMDP-1800 type 1+12+2+2 sintered stone straight edge polishing machine is China YongTao machinery according to customer needs for a tailored straight edge polishing machine. This machine uses two rows of supporting wheels ,1 limit structure,1 grinding head rough grinding,12 grinding head polishing straight edge,2 upper chamfer,2 lower chamfer, processing sintered stone side. Mechanical design and processing width of 1800mm, two rows of brick pressing mechanism. Diamond edging wheel is used for rough grinding. The straight edge polishing grinding head is polished by a snail buckle connected with a water grinding plate. The upper and lower chamfering is chamfered and polished by water mill. The biggest highlight of this machine is that there is no baffle, the plate can be large or small, and can be processed in the machine at the same time. Each polishing head can be independently controlled, and the use of pneumatic polishing can effectively increase the brightness of the polishing. This straight-edge polishing machine is mainly used for: straight-edge polishing of sinter stone under the basin. For the use of small processing factories, small occupation of land, strong flexibility, mechanical design and operation is simple, do not need very professional people can quickly learn to boot. Especially the professional processing plant of sintered stone cabinet countertops and bathroom counters, it is very suitable to buy this sintered stone straight-edge polishing machine. It has the advantages of fast processing speed, good processing effect and convenient replacement of grinding head. Whether it is a large processing plant or a small processing plant, it is the first choice for you to buy a straight edge polishing machine.
Processing materials: sintered stone, quartz stone, artificial stone and other new building materials
Mechanical function: machining single side straight polishing, up and down small angle chamfer
Polishing mode: pneumatic polishing
Suitable for processing products: sintered stone basin, quartz basin, single-layer board and other suitable products
Sintered stone edge polishing machine Mechanical equipment features:
1. The main drive belt of the machine adopts red soft belt, which can effectively adsorb the plate and avoid the plate shifting;
2. The entrance of the brick adopts a limiting mechanism on the left and right sides, which can make the processed plate aligned without moving;
3. Brick supporting mechanism adopts two roller supporting bricks, the large plate can support the plate, the small plate can be conveniently moved back into the brick from the brick connecting place, convenient manual operation;
4. Brick pressing mechanism adopts two solid pressing beams, and the pressing wheel is made of polyurethane material, which has longer service life.
5. each motor adopts stainless steel water cover, prevent sewage into the motor;
6. polishing grinding head using electric eye control grinding head rise and fall, the use of air pressure polishing, polishing brightness is very beautiful;
7. The electric box adopts rocker electric cabinet control, the operation is more flexible and convenient;
8.The polishing grinding head is connected with snail buckles, and the water grinding plate is polished.

YAMDP-1800 14 head sintered stone arc beveled polishing machine, is China Yongtao machinery according to the market demand and the production of a sintered stone processing machinery. The first step, using 3 axis water jet cutting machine cut a arc shape and then get the machine on the edge grinding. Put the slab into the belt, and the lower hypotenuse of the arc is processed through the front two motors, because the cut slab is with the arc. Two motors with the radian of the slab automatically induction in and out of the grinding, the back five motors used for polishing. The second half of this machine is for machining flat edge polishing and upper and lower small bevels. The maximum processing size is 1.8m. The front 7 motors are divided into 2 molding and 5 polishing. Can process straight line hypotenuse, arc hypotenuse. This machine is specifically designed for sintered stone table tops. Batch processing table tops, Yongtao machinery sintered stone arc bevel polishing machine is a good choice. Fast speed, good processing effect, good mechanical stability, simple operation. But it must be used with a water jet cutting machine. This kind of machine has been accepted and used by a large number of customers in China, and is highly praised by the majority of customers. The key is to greatly save the labor, improve the processing output, so that customers really earn money.

Characteristics of sintered stone arc beveled polishing machine:
1. forming part using high power motor grinding, processing speed is fast;
2. polishing part adopt small power motor, electricity saving, polishing for pneumatic structure, automatic downward pressing polishing, polishing effect is good;
3. The polishing mill adopts water mill material, and the polishing brightness is very good.
4. polishing grinding disc and snail knob grinding head chuck connection, convenient replacement of grinding disc and chuck;
5. The supporting brick adopts plastic roller, and the plate will be more flexible when grinding forward, and will not be stuck;
6. plate even different sizes and specifications can be put into processing at the same time, more flexibility;
7. The pressing wheel is made of green polyurethane material, which can be used longer and more durable.
8. the control box adopts a fixed electric cabinet, a rocker electric cabinet, rocker electric cabinet operation is more convenient;
9. Transmission motor adopts frequency conversion speed regulation, processing speed stability is better, processing quality is better;
10.Stainless steel water cover is used for each fixed motor to prevent sewage from entering the motor in the process of processing, which can effectively avoid water and burn out the motor.

Sintered stone edge polisher Mechanical functions:
1. processing straight edge polishing
2. processing flat side of the lower hypotenuse polishing
3.processing arc straight edge polishing
4. processing arc under the hypotenuse polishing
5. the processing of upper and lower safety small hypotenuse

Ceramic arc edge polishing machine
Earliest product in the domestic industry and fastest obtain customer’s recognition and trust.
More than 20 years experience on the machine, keeps improving our products. Using high precision machine and good material to processing the spare parts.
Specialized assembling and strict quality control.
Easy and efficiency operation.
Product Details
YONGDA 14 heads ceramic arc edge polishing has edge cutting, notching, chamfering, polishing and so on functions. It can process various edges such as 90 degree arc edge, straight and bevel edge, straight edge with chamfering, arc edge with notching etc. Polishing parts use 14 polishing heads, efficiency, shine polishing, steady quality for edge polishing. With fast processing speed, low processing cost, various edges, YONGDA ceramic arc edge polishing machine is highly appreciated by new and old customers.
Suitable industry: suitable for ceramic processing industry. For step tiles processing, window tiles processing, metope waist line etc.

YANMP-1300 CNC sintered stone basin hole edge polishing machine is a high-precision basin hole edge polishing machine newly developed and produced by China Yongtao Machinery. The problems of traditional inner hole edge positioning, non-standard edge grinding, low processing efficiency and rough processing edge are solved. This model is based on the cut inner hole as the center, using Japan imported industrial camera and photo function, automatic positioning, simple operation, no need to draw, automatic identification of the width and size of the basin hole, effectively solve the traditional model to plate edge positioning, the inner hole will appear deviation. The grinding adopts high speed motor, and the tool head is divided into coarse grinding, fine grinding and series polishing. The machining efficiency is high, the grinding and polishing can be completed at one time, without the need for the traditional machine to change the grinding wheel frequently, and the processing speed can reach 1 piece in 3 minutes, which is far ahead of the same type of products.
Processing materials: sintered stone, quartz stone, marble
Processing mode: a spindle series 4 grinding wheels, divided into coarse grinding, fine grinding, fine grinding, polishing
CNC stone machinery Equipment features:
1. 1 machine tool and 1 CNC control cabinet;
2. Material of 4 grinding wheels: 1 diamond grinding wheel, 2 resin grinding wheels and 1 polishing grinding wheel;
3. The equipment adopts 6 pressing plates, 3 on the left and right, and adopts pneumatic pressing bricks;
4. about 2 guide rail adopts imported precision screw, can ensure the processing accuracy;
5. Under the sintered stone mesa plate, a white rubber strip is adopted on the left and right to avoid wear of the plate;
6. Series 4 grinding wheels, grinding once, sinking 1 grinding head grinding pin, equipped with 6 water pipes to wash the grinding head and plate edge of sewage and impurities;
7. Take photos first, locate the center of the plate, and grind and polish 4 times according to the size of the plate;
8. This machine design is beautiful, has the advantages of simple operation, processing speed, labor saving, high degree of automation.

Glazing Line for ceramic, porcelain, sintered stone production line

ZT12/16 Engineered Quartz Stone Marble Granite Polishing Machine
ZT-12/16/20, equipped with multiple resin disc heads and PLC control system, can grind and polish slabs continuously and automatically, is perfect for surface finishing of hard stone such as granite. Mounted with different type of heads, it’s also great for marble, quartzite and other stone slab finishing.
ZT-12/16/20 Heads marble granite stone polishing machine:
1) Using PLC electrical system and LCD screen menu offer intelligent control.
2) Processing width and working pressure of grinding heads can be adjusted freely .
3) Sensor at the entrance to scan the shape of the slabs in sequence and transmit the signal to controlling unit for precise working
4) Adopting central automatic lubrication system, having all moving parts and bearings to get a good lubricating effect and longer life.
5) Conveyor self-cleaning and stone chip removing system

Esuton provide whole set quartz stone slab producing machine line, just invest 91,200USD then you can have whole set quartz stone slab producing machines.
Auto single head stone polishing machine used to polish granite/marble/terrazzo stone slab, it’s one ideal machine for new starter who don’t want to invest too much and just want to produce dozens of slabs per day.
1. Max working width: 900/1250/1600/1850mm
2. Max working length: 3200mm
3. Polishing heads quantity: 1 head, Frankfurt/Fickert abrasive head both ok, lift of the heads controlled by pneumatic cylinder.