Granite Infrared Bridge Cutting Machine in Lebanon

The HK-0105/A Block Cutter is fully automatic. The table stands up to 80o, and we can put the slab on the table, then the table returns to the normal position and we begin cutting. The table rotates 45o and 90o. The disk moves up and down, toward and backward. It is laser guided. It is controlled by an inverter with ample functions, perfect accuracy, high reliability and easy operation.
It can cut more than one slab in the same time; we can cut per example 7 slabs per 2 cm of thickness, or 5 slabs per 3 cm of thickness.
Everything is automatic, only changing the measurements is manual.
Also we can produce this machine with full automatic system with PLC system, where the measurements are also automatic controlled.
It is based on a cement base.

The SNM-DEI is a heavy duty monobloc bridge cutting machine suitable for all factories working in the stone industry. When equipped with suitable tooling it is capable of working marble, granite. Cement etc... it is easy to handle and maintenance free.
The main structure is made of heavy duty steel in order to ensure maximum stability and quality of the machine over time. The table's sliding surface is composed of very thick plates which are machined on five sides.
The bridge is made of a very stiff box type frame and the base of the slide ways is directly machined on the bridge.
The placement of slide ways is quick and expensive and enables this machine to keep its accuracy indefinitely.
Metal shoulders replace conventional concrete walls, facilitating installation and transport of the machine.
The disk is directly mounted on the motor and the machine is suitable for inclined cuts from 0 to 45
The forward and return movement of the head is powered by a brushless AC motor with inverter.
The machine is equipped with end stops both forward and reverse as well as up and down.
The driving system inside gears is case hardened before final grinding.
The machine is equipped with an insulated electric panel as well as an articulated control pendant which enables the operator to control the most important commands: Back/Forward and Up/Down for the head, and a potentiometer to control the advancing speed for both cutting directions.
The electric and tubes for tool cooling are supported by nylon cable holding chains.
All components are mass-produced, safe and of high quality.

The HK-0105/B Block Cutter is fully automatic. The table stands up to 80o, and we can put the slab on the table, then the table returns to the normal position and we begin cutting. The table rotates 45o and 90o. The disk moves up and down, toward and backward. It is laser guided. It is controlled by an inverter with ample functions, perfect accuracy, high reliability and easy operation.
It can cut more than one slab in the same time; we can cut per example 7 slabs per 2 cm of thickness, or 5 slabs per 3 cm of thickness.
Everything is automatic, only changing the measurements is manual.
Also we can produce this machine with full automatic system with PLC system, where the measurements are also automatic controlled.
We can move this machine wherever we want.

The HK-0104/A Block Cutter is fully automatic.
It has 2 tables, one for cutting the block in horizontal way, the other for cutting the block in vertical way. The disk is stable and doesnt move, it only move toward and backward automatically. The tables are also stable. We must move the tile manually to cut it. The movement of the disk is regulated by an inverter.