Limestone Finishing, Profiling Machines in Poland

Grinding and edge polishing machine: Hensel model 521/549. Age 1989. Working table, length: 6m. with automtic polishing. Easy to dismantling. Thickness of polishing slab to: 200mm, to straight edges and profiles- round 10 cm. With tools: diamond tools, diamond spindles and changing tools. Machina with dashboard. With full specifications and instruction. Machine in good condition.

The most frequently purchased machines are those with workspace dimensions 2000X4000. They are perfect for the stone industry and for companies which deal with cutting metal. They are perfect both for production plants and for service shops.
The lowest costs of pump and head maintenance
The Kimla waterjet machines are equipped with high pressure pump with intensifier pump and Accustream accessories (Accustream - a renowned American company). Pumps produced by Accustream distinguish the lowest maintenance costs, which amount to approximately U.S. $ 1.25 per hour of work. It is worth noting that the maintenance costs of some producers are even four times higher. This is especially important as in a competitive waterjet market operating costs can determine the success of the project.
Adjusting the amount of abrasive
Kimla machines are equipped with Accustream abrasive regulator with smoothly regulated amount of garnet supplied to the head. This allows you to fine-tune the amount of abrasive to cut material and the specific conditions of the machining.
Compact space-saving design
Waterjet machines produced by Kimla company are characterized by an extremely compact design which requires little space and is convenient to use. Access to the material lying on the bath grate is accessible from four sides and allows the operator to manipulate the material freely and enables the collection of cut pieces.
200l abrasive tank with the hopper system
Abrasive tanks supplied with Kimla machines have a capacity of 200 liters, which allows for hours of cutting without stopping to refill the abrasive. The hopper allows for convenient refilling of abrasive through the use of automatic lifting the mushroom valve.

Monobloc machine for polishing of the edge and chamfers
FLOTTER 520/540
The conveyor belt edge-polishing machine Mod. FLOTTER 520/540 has been developed for the polishing of the edge and chamfers on natural stone like marble or granite. The main characteristics are the small overall dimensions, easy use and maintenance, for example the abrasive changing thanks to the large tool access area at the rear of the machine.
The machine is equipped in the special “floating system” with oscillation of the heads +/- 1° from horizontal position. This ensures perfect polishing of flat edges on granite slabs with thickness till 60 mm.

Edge Profiler B1PK2000.1. Please check out our Edge Profiler. We hope that pictures will help you make the best choice of the most adequate solution for your company . Edge Profiler is adjusted to milling and polishing modes, depending on suitable working program: chamfers, flat sides (also ‘zigzag’ motion ), quarter rounds, half rounds, rounds and other profiles.

Set of Column Processing Machines. The whole set of machines includes a milling machine, polishing machine and pneumatic drill. Those machines are used, inter alia, for production of vases and columns

TORO 64 ÷ 66 is a multi-head automatic belt polisher for processing straight and rounded sides (half-round, quarter-round, etc.). It has been designed to work on all types of stones, marble and granite with a thickness of 20 to 100 mm. Complete and universal machine suitable for small, medium and large plants.
TORO, THE RIGHT REASONS FOR CHOICE:
fully automated processing,
oscillating stick driven by two connected brushless motors with simplified mechanics,
the highest quality and efficiency of working spindles with a long service life thanks to special stainless steel and internal air pressure to improve water resistance
easy configuration and flexibility - a fully electronic computer platform with a friendly operator interface. Software developed in GMM, which can additionally remember a lot of useful data and information, such as working time, various statistics, alarm history, rules for standard jobs or profiles,
surface protection against rust - all surface treatments are performed
inside GMM: from sandblasting, cold galvanized treatment, to final painting.

The Softec ™ waterjet cutting software was developed by TECHNI Waterjet ™ with two very clear goals:
1.cutting at minimum cost with the highest accuracy,
2. simple and intuitive interface facilitating the operator's work.
The result is a comprehensive "All In One" software, specifically designed for waterjet cutting, that maximizes productivity and can be learned quickly and easily by anyone with computer experience without any problems.
At the heart of Softec ™ software is Tru-Cut ™ technology, which is a highly advanced database of algorithms that determines optimal cutting speeds and machine performance characteristics. After selecting the right material for cutting, all you need to do is enter the thickness and edge finish of the element, the computer will do the rest, ensuring minimal cutting time for any element. All with one software!
Softec Nest uses advanced nesting algorithms that have been developed by one of the world's largest and award-winning CAD software developers - Geometric Global.
The benefits include:
- improving profitability by minimizing feeding time.
- increasing the optimization of cutting along with the material efficiency.

Gmatic 3000 is a machine with a solid structure and an indispensable tool magazine, which facilitates the production of kitchen countertops, shower boards, drainers, decorative elements, bas-reliefs and inscriptions.
The large monoblock frame allows the positioning and processing of large slabs, such as synthetic and ceramic materials. The work table is made of natural stone, leveled by the machine itself.
The Gmatic 3000 uses 4 brushless motors to move the axes on linear guides with ball bearings. The machine is available for manual tool change or with automatic tool change. The control interface is a console equipped with a comfortable, large, 21.5 "touch screen, GCAM's own software, which was developed especially for the stone industry.