Marble Tile Cutting Machines

The cutting line N.2990/2200-5+7C counts with:

1 Intermediate motorized plastic rollers table, model N.2274.
1 longitudinal cutter with 5 cutting heads ø 600 and mobile bridge, model N.8000-L-5C.
1 transverse cutter with 7 cutting heads ø 600 and mobile bridge, model N.8000-L-7C.
2 motorized band cutting tables, model N.2304.
1 table with stone sheet selection stops, N. 2590.
1 double displacement table with motorized rollers, model N.2585.
1 motorized band table for material output, model N.2426.
CUTTING LINES N2990/2200 5 + 7 HEADS TECHNICAL SHEET
Our cutting line N.2990/2200-5+7C has been designed aiming maximum production capacity with minimum labour force, as well as the absolute reliability of all its parts.

The production line overall dimensions have been adjusted to the customer needs, following his criteria about the produced pieces dimensions and the final products obtained.

The whole line features better robustness and reliability in all its subassemblies, being them all designed to support the hardest working conditions. This is one of the most relevant aspects where we can offer our long time experience in designing and manufacturing stone processing machines for this sector.

One of the great advantages of the machines integrating this production line is that all the designs are already tested solutions. They only differ from our standard machines in their overall dimensions, but not in all incorporated components.

With the automatic loading trolley NDF-1289-P/V (optional), the longitudinal cutter is fed with material from a stacker. Panels are removed using suction cups connected to a vacuum pump that tilt and place them in a horizontal position, ready to move to the cutting unit. Panels from the horizontal stacker are placed waiting to enter in the production line in such a way that the following panels maintain the alignment being unnecessary to adjust the cutter starting point.

The intermediate rollers table not only joins the feeding trolley and the longitudinal cutter but also acts as an intermediate storage so that the cutting unit stop times are very low.

The 5 heads longitudinal cutter N.8000-L-5C over rolling bridge and the 7 heads transverse cutter N.8000-T-7C are equipped with the latest technology, both in their mechanical design and in their electronics. It is worth mentioning the use of a high precision and stiffness linear guide system with linear recirculating ball bearing unit by the gripper cutting head bridge during the cutting works. The bridge is supported by two beams, being parallel to the cutting table the first and perpendicular, the second.

The sliding disc holder cutting heads also move vertically guided by a linear recirculating ball bearing unit and operated by a laminated ball screw with recirculating ball screw nut in order to achieve a quick and precise positioning and being all perfectly protected by PVC bellows. The gripper cutting heads have translation movement thanks to a gear motor controlled by a frequency inverter and positioning magnetic scale in the X axis and cutting head operated by a ball screw and an electric gear motor for vertical positioning in the Z axis. The cutting heads positioning is simultaneous thanks to their independent inverters.

The N.2304 cutting tables consist of a steel structure with a machined top plane where the motorized transport band lies. The band is rubber covered to avoid slab slipping during the cutting process. A stone blocking device, placed in the second transverse cutter table, allows reducing times during the transverse cut process considerably.

The table N. 2590, placed just after the longitudinal cutter, counts with a stop system, pneumatically driven, that allows the selection of the previously cut stone strips according to the width for their further processing in the longitudinal cutter.

The second table N.2585 counts with a towing device to join and align the strips before their processing in the transverse cutter, and to remove waste from the longitudinal cut.

The unloading table with band N. 2426 count with a steel profiles frame with a transport band to unload the cutting table while the transverse cutter receives and starts cutting the next panel.

The palletising robot N-3530 (optional) with vacuum suction cup is specially design to do automatic palletising tasks on the basis of the same operation principles applied in the Nodosafer standard palletising. It also offers many advantages such as work process optimisation, shorter cycle times and efficient use of the down times. The reception suction cup, with a special design, counts with a rectangular plate, able to support horizontal loads of up to 120 kilograms.

All dangerous working areas are isolated from personnel access by means of protection fences and optical barriers.

All machines and cutting heads count with a centralized greasing system for an easy and quick maintenance.

As for electricity and control, it is worth mentioning the use of last generation automatons with programs specifically designed by our technicians, so that the machine programming is as easy as possible, avoiding unnecessary loss of time. The operation cycle programming and the visualization of this sequence is made over two screen operator terminals where all the cutting parameters are displayed.

LOADING TROLLEY N.1289-P/V FEATURES
Table dimensions 1880x3200 mm
Frame dimensions 2560x1140 mm
Central vacuum 30 m3/h / 1.35 CV
Hydraulic control unit 5,5 CV
Trolley advance engine power 3 CV
Table engine power 1,5 CV
Trolley displacement speed 5 m/min
Stone sheet displacement speed 11.5 m/min
Maximum working width 2200 mm

MOTORIZED ROLLER TABLE N.2274/2200 FEATURES
Table width 2930 mm
Maximum table length 3500 mm
Maximum working width 2200 mm
Forward speed 11.5 m/min
Drive engine power 1.5 HP

BRIDGE CUTTER N.8000-L-600-5C FEATURES
Machine width 4220 mm
Rolling ways length 6000 mm
Maximum disks distance 1-5 2200mm (inside)
Minimum disks distance 1-2-3-4-5 300 mm
Cutting disks diameter 600 mm
Maximum height of the cutting pieces 150 mm
Disk engine power 15HP (5)
Total power installed 82 HP
Water consumption per disk 15-20 l/min

BRIDGE CUTTER N.8000-T-600-7C FEATURES
Machine width 5370 mm
Rolling ways length 5500 mm
Maximum disks distance 1-3 3500 mm (inside)
Minimum disks distance 1-2-3-4-5-6-7 300 mm
Cutting disks diameter 600 mm
Maximum height of the cutting pieces 150 mm
Disk engine power 15HP (7)
Total power installed 132 HP
Water consumption per disk 15-20 l/min

BAND CUTTING TABLE N.2304/2200 FEATURES
Table width 2960 mm
Max. Table length 4044 mm
Max. Band width 2200 mm (inside)
Band displacement speed 11.5 m/min
Drive engine power 3 HP

DOUBLE DISPLACEMENT MOTORIZED ROLLER TABLE N.2585/2200 FEATURES
Table width 2930 mm
Max. table length 3900 mm
Max. working width 2200 mm
Rollers forward speed 11.5 m/min
Roller drive engine power 1.5 CV
Centring displacement speed 5 m/min
Transversal displacement engine power 2.5 HP

ROLLER TABLE WITH SELECTION STOPS N.2590/2200 FEATURES
Table width 2930 mm
Max. table length 3700 mm
Max. working width 2200 mm
Rollers forward speed 11.5 m/min
Roller drive engine power 1.5 HP

MOTORIZED BAND TABLE N.2426/2200 FEATURES
Table width 2930 mm
Max. table length 4300 mm
Max. working width 2200 mm
Rollers forward speed 11.5 m/min
Roller drive engine power 3 KW

PALLETISING ROBOT N-3530 FEATURES
Max. load 120 kgs.
Mínimum piece size 300 x 300 mm
Central vacuum 100 m3/h
Installed power 25 CV
Minimum cycle time. 10” sec

Manual cutting/milling machine
Worktable and undertable:
Seasoned cast iron made with inner stiffening ribs to grant maximum rigidity. Cast iron supports are assembled on the worktable and are provided with wheels sliding on protected ground ways. The cast iron ways are supplied with steel guard to avoid water and mud infiltration.
Worktable control:
Manually: by cast iron handwheel located at table and to make work easier and for a full use of table lenght.
The table slides thanks to proper racks avoiding the table slipping and permitting full motor power.
The rack is well protected by suitable guards. One hand lever brake of simple use can lock the table at any position. Automatic: By hydraulic cylinder with adjustable working speed device (HP 3 motor) from control board.
Spindle:
Located on machine beam, is cast iron made to guarantee best diamond disc/wheel performances, Its rational frame allows easy manual tilting operation for inclined cuts.
The spindle shaft is housed in rotating group and turns on proper bearings eliminating any vibration. The coupling between shaft and motor is performed by "V" belts.
Column and arm:
Cast iron made single pieces to grant max, stoutness.
Column control:
Manually: By hand winch actioning screw and bronze lead nut.
Motorized: By 1,5 HP motor that can be operated from control board.
Arm control:
Manually: By hand winch actioning screw and bronze lead nut.
Motorized: By 0,5 HP motor that can be operated from control board.The automatic type will be supplied with separate electric box, movable pendant control board at low electric tension and hydraulic central unit.

SPECIFICATIONS
Disc Size Range 300 to 350
Table Size 800w x 3300l
Cutting length 3200
Disc Motor Power 4.0 kilowatt
Gross Power 5.0 kilowatt
Machine Weight 1.5 tonne
Overall Dimensions 4000l x 1500w x 1800h

Bridge saw ITC 3000 AAS-T with motorized advancement of the cutting head (with inverter for regulation of advancement speed). Toothed belt transmission.
The single beam system, constituted by structural square aluminium profile, makes this saw very tough and precise. 4 detachable legs equipped with adjustable feet. Devised and designed for marble workshop and big stone industries.
Perfect for cutting natural stone, marble, granite, Grès porcelain stoneware, etc. Inclination of the bridge from 90° to 45° by means of a handwheel placed in the right side of the machine base.
The cutting head, both at 90° and 45°, is perfectly in line with the middle of the machine; this feature allows to have a big surface for leaning slabs.
Adjustment of cutting depth is by means of a flywheel above the motor unit.
The work surface, in multilayer marine plywood (phenolic), ensures stability, resistance to bending, resistance to water and damp. Equipped with a cooling system for the cutting disc: a pump for the circulation of water, positioned within the collection tank, allows water to flow onto the disc for cooling.
The self-supporting tank, in sheet metal, has an extra support frame and it’s completely welded to structural reinforcements that guarantee maximum resistance to torsion/bending.
Its emptying is made by opening the draining cap.
The tank has some hooks for using 8 side roller tables, 4 front and 4 rear, which aim is to facilitate the slabs movement and giving greater stability to the machinery.
Each side roller table has 4 legs with adjustable feet.
ACCESSORIES SUPPLIED: electrical switchboard, 3 extension side roller tables 150×50 cm, instruction manual, lateral fence, precision laser, set of wrenches, side stop.
OPTIONALS: diamond blades, goniometer fence, motor for adjustment of cutting depth, speed reducer for the cutting motor, supplementary side table with rollers 100×50 cm / 150×50 cm / 200×50 cm. Grinding wheels for half-bullnose edge

Hydraulic Natural Stone Splitting machine
It suitable for saw cut splitting and stamping

The Menhir machines are our most powerful splitting Steinex machines, splitting very large stones with great accuracy. These splitting machines have been installed in countries all over the world and have become a fundamental machine in the quarries and stone processing facilities of many of our customers
Machinery in the Menhir range is mainly used as a primary machine in a splitting line producing semi-finished split stone or as a machine producing final products such as large kerb stones and large wall stones.
Menhir machines are used to split granite, limestone, sandstone, slate, porphyry and many other types of natural stone. Blades range from lengths 1000 mm to 1600 mm with splitting pressure from 220 ton to 640 ton depending on the customer’s product requirements and the properties of the stone being split
These resilient machines are used to split both raw material and sawn slabs. The non-sawn stone includes stone quarried in blocks or very irregular natural stone quarried using explosives. The Menhir machines are equipped with high levels of adaption in the blade system and designed with a pivoting blade head to make splitting such irregular material efficient, giving a high quality split surface finish and leaving minimal waste. Each machine is equipped with a highly efficient low noise hydraulic and power unit. The hydraulic unit comes with a several pump configuration options, including the possibility to adjust the speed at which the machine blade begins to apply pressure to the stone and the desired eventual” ramp” or split pressure plan the follows. Being able to set these splitting parameters on the Menhir splitting machine allows our customers to optimize the quality of the split face according to the properties of their stone.
The Menhir splitting machines come with an extensive range of options including conveyors, block loaders, manipulators, remote control consoles and several different hydraulic configurations depending on the customers requirements.

Horizontal Splitting Machine

HPO-Bridge Cutter
Portable cutter
It allows cutting pieces in a very fast and easy way.
A steering wheel is manually used to make the table work. This table is provided with mechanical stops in order to guarantee the cut pieces facing.
Different models depending on the disk sizes and the needs of the kind of cut.

Description:
Max.Strip Machinable width mm 600
Machine length (L) mm 3000
Water requirement for each spindle L/min 120
Number of disc-holder heads nr 1
Discs diameter mm 300 - 350
Cutting motor power kw 11/ 18/ 22
Unloading robot driving motor power w 0.37
Outfeed conveyor belt motor power kw 0.75
Machine height (H) mm 1980
Belt width mm 700
Main conveyor belt speed m/min 4
Approximate weight Kg 1700
Machine width (W) mm 2000

*Machine works as hydraulic
*Max Stone Lengt 30 cm, 40 cm, 50 cm
*Max Stone Width 12 cm , 20 cm
* Avarage daily production is about 120-150 sqm

Manual edge cutting machine adopts the joint structure, and the main machine can be 45 ° Rotation, electric lifting, trolley hand drive, compact structure, beautiful appearance, stable performance, high machining precision.

Cross Cutting Machine for marble,travertine

Bugnatrice
Bugnatrice 140 strokes/min and motor 2HP.
Length of the stroke 5-20cm and thickness 2-18cm.

EM08 Head Cutting Machine

• Working Width: 680 mm
• Working Thickness: 10 – 100 mm
• Number Of Heads: 1
• Disc Diameter: 400 mm
• Cutting Unit Motor Power: 7,5 kW
• Bridge Motor Power: 0,75 kW
• Total Electric Power: 8,25 kW
• Machine Dimensions ( W / L / H ): 2200 / 3600 / 2100 mm
• Sensor Cutting Width Adjustment
• Linear Guide Bridge Movement
https://ekizoglumakina.com/en/product/head-cutting-machine

The Portick is suitable for cutting marble, granite or similar material.
Peripheral speed can be adjusted using inverters
Saw trolley is moveable, on rail length 6500 mm and is electric driven

we have 48 cm and 65 cm belt wide with moulding body. you can have fully stainless steel cover. you can see all the vdeo from our facebook page. www.efarge.com

- Blade dimensions are Ø300 mm or Ø350 mm.
- Cutting length capacity is up to 133 7/8 inches (3400 mm)
- Easy to move on rail with roller system.
- Superior clamp system for increase accuracy.
- Water cooling system prevents damage to the blade and materials.
- Automatic overload power shut down

Construction site saw MANTA INOX 120
€ 2,995.00 *
excl. VAT plus shipping costs
Available again soon
Product number: O16.102
description
Product information "construction site saw MANTA INOX 120"
Special edition
for cutting tiles, natural stone, cast stone slabs and other building materials
latest generation of mobile stone saw with powerful motor, stainless steel tub, mini battery laser and stop
very robust and durable construction
full-surface support table for thin workpieces
precise cuts thanks to the 40 mm diameter precision round guide with recirculating ball bearings
more stability thanks to machine feet with cross bracing
Easily transportable thanks to the folding machine feet and transport wheels (with a cutting length of 1500mm, rigid feet)
maximum cutting depth 110 mm | Speed ​​2,800 rpm | max. ø diamond cutting discs 350 mm | Bore 25.4 mm, power 2.6 kW with motor brake / 230 V | Galvanized swivel element, infinitely adjustable 45-90 degrees | Height adjustment via M24 threaded rod with large handwheel
Dimensions (L / W / H): 1,770 x 660 x 770 mm
Weight: 120 kg
Cutting length: 1,250 mm
Cutting depth: 60/80/110 mm
Cutting disc ø: 250/300/350 mm

Cross cutting machine with single blade, swivel table and tilting bridge H45R. Ref 8802
Cross cutting machine with single blade, swivel table and tilting bridge
Simple and precise to cut in miter and / or false square to cut marble, granite, quartz, porcelain and solid surfaces.
The tilting head allows the blade to cut from 0º to +45 to make miter cuts easily, quickly and accurately.
The work bench is rotatable from + 45º to -45º to cut false square.
The machine is built with a monoblock structure, it does not need a foundation. It is also equipped with a basin that collects the residual water.
The workbench is made up of a series of plastic rollers (not motorized) installed on supports parallel to each other, which maintain the horizontal plane and rotate the degrees set by the operator on the display, with respect to the direction of advance of the disc. cut.
The workbench is equipped with a pneumatic clamping system that locks the material against the feed guide when cutting the diamond blade.
The head carrier bridge moves from 0º to + 45º from the vertical position. The rotation movement is mechanical and controlled from the display.
On this bridge composed of chrome bars, protected and with self-lubricating bushings, the cutting head moves.
In the upper part of the bridge is the control panel, with the functions of forward, backward, emergency stop, spindle forward speed, degrees of rotation of the workbench, to allow easy operation of the machine according to the safety rules.
The cutting head is equipped with an electric motor that transmits through V-belts and in a position where it is protected from water. The head is built in a way that prevents dirt from entering when working.
The cutting unit is equipped with a valve for cooling the blade.
The electrical system is installed in an electrical panel on the machine, on one side. The frequency variator is installed in this box to adjust the cutting head advance speed. Also installed are the display of the degrees of rotation of the bench and display of the degrees of inclination of the head.
The header is built to do the following movements:
Head disc cutting movement
Advance of the cutting head carriage by means of a gear motor
Rotating movement of the workbench by button
Bridge tilt movement via button
Locking by means of pneumatic cylinders to the two mobile jaws.
Technical characteristics:
Cutting heads: 1
Worktop height: 875mm 8up to 925mm)
Maximum useful cutting width with the bench at 0º: 850mm
Maximum useful cutting width with the bench at + 45º or -45º: 610mm
Maximum thickness: 75mm (bridge at 0º) 50mm (bridge at +45)
Idler Roller Workbench Length: 2,850mm
Maximum disc diameter: 400mm (hole 50mm)
Bank rotation: all degrees are shown on the display from 0º to +45 or 45º
Rotation of the head carrier bridge: All degrees are shown on the display from 0º to + 45º
Disc motor power: 7.5Kw

Special machine for dividing reinforced panels with a max. Width into two parts. of 1,300 mm. and a thickness of 20/100 mm. Electro-welded steel structure with cast iron columns and beams on which 2 spindles are applied in parallel position carrying 2 discs Ø 725 mm. plus supporting structure diamond wire Ø 7.2 mm. with n ° 2 flywheels Ø 1.000 mm. driven by a motor managed by an inverter to obtain an optimal peripheral speed of the diamond wire, confirming the type of material that will be cut; plus respective guide wheels and wire adjustment. Equipped with interchangeable belt sliding surfaces at the time of wear. Motor power HP. 25 + 25 + 15 + 1. The advancement of the conveyor belt is managed by a geared motor controlled by an inverter which allows a feed from 0 to 1,000 mm. which can be adjusted to the optimum speed, according to the material to be cut. Machine with disc protections, diamond wire, picker and guides in stainless steel.

Mounted on a steel chassis, machine has a closed railing with lubrication system. Makes accurate and sensitive cutting works of given dimensions, by using both moving speed control and cutting speed control.
Desired dimensions of the stone are valued to the analog screen and machine is taken to the mode of Cutting Dimensions. Crank of saw moves down and the carriage wagon moves automatically, starts to cut stone. When the carriage comes out from the stone, saw automatically moves to upwards. Carriage wagon comes to the starting point again. Tower motor counts to the required value and saw crank comes downwards again and starts to cut again. Cutting work keeps repeating like this way till the ending point.
In cutting direction, main saw cutting speed and carriage wagon speed can be adjusted to desired value. At the end of cutting point speed is steady to fast move.
Our side cutting machine is built on totaly steel construction. Anti-rust epoxi paint reinforcements, special transmission closed railing system is strengthened wit waterproof coverings.
Cutting system works with the help of 90 degrees and 45 degrees gearboxes.
Flat watertight motor models are used on our machine. Head movements are accurate and sensitive for quality of cutting works
Our side cutting machine is designed for both side cutting works and side trimming.
Rotation move of main head of the machine ( C axis ) is manual.
45 Degrees Move is manual by gearbox.
Sliding ways Moves ( Y axis ) automatic and manual.
Carriage wagon Moves ( X axis ) automatic and manual.
Can be operated both automatically and manually.
Head system makes cutting 0 – 90 degrees, steady at 45 degrees.
With the help of gearboxes speed controlled, machine makes cutting works automatically.
Information about the materials that used on the machine
Electric Motors : Gearboxes
* Motored gearbox for Sliding Ways (Gearbox 0,75 gamak motored gearbox)
* Motored gearbox for Piston Sliding (Gearbox 0,75 gama motored gearbox)
* Motored gearbox for carriage wagon moves (Gearbox 0,75 inter motored gearbox)
* Gearbox for 45 degrees cutting moves (Volant/Gearbox)
* Flat watertight Motor for marble and granite cutting works ( 9,3 kw 1500 / 3000 dual rounded köylüm motor)
Movement / Walking Systems:
* 0,5’’ steel sprocket mechanism for carriage wagon movement
* Head cutting movement system with the help of trapeze.
* Cable carrying systems are applied on functionality of sliding ways movement.
* Carriage wagon Closed sliding way walking equipment is provided with transmission crank.
Steel Construction of the Machine
*Side cutting machine is steel monoblocked and massive.
* Chassis is built up on material of 320 NPLU.
* Carriage wagon is designed from material of 80 X 20.
* Carriage awagon also has a steel chassis and processed on CNC machinery for 6 axises.
* Back tower is built from 10 mm massive sheet metal, designed to reduce the vibration of the machine.
* Upper sliding ways are processed on CNC machinery from 10 mm massive sheet metal with 8 mm between grid.
* Wagon parts , wagon wheels are founded from şifero gg50 alloy for resistance of wear.
* Piston System is massive steel thick pipe.
* All head cutting group parts are cleared on milling machine.
* Head group parts are covered with anti-corrosion and rust components.
……..……..THE OPERATING PROCEDURE OF THE MACINE………………
The periodic maintenance of the machine has to be done daily, weekly and yearly.
Lubrication of critical parts of the machine has to be done regularly. ( like hubs of the pressure wheels, sliding ways, motor lubricating pump, etc…)
In case of any problems resulting from any weak or none maintenance, buyer firm pays for repairing and fixing expenses.
Our company provides technical support as soon as possible depending on the conditions.
In case of any faults depending on user or wrong operating, any intervention will be executed after an expert examination on the machine.
It is under warranty in period of 1 years.
It is buyers duty to supply cutting saws on the machine.
Consumable parts of the machine are not included to the warranty. (like cutting saws)
Accomodation and transportation expences of installation crew, belongs to buyer firm.
…..….THE ACTS THAT YOUR SIDE HAVE TO DO ON STAGE OF INSTALLATION…...
To supply 13 kw electricity to near the fuse panel of the machine, an electrician is needed on setting up for cable connections.
To supply water plumbing near machine.
It is needed to supply the cutting saws on the installation.
The place needed for machine install : 7000 mm X 3000 mm X 2500 mm (height)
One tin of machine oil (number 30) , one tin of Grease oil.
Marble Side Cutting

Saw Diameter Ø 400/450 mm
Number of Saws 1 Piece
Saw Motor Power 7.5 kW / 11 kW
Saw Driving Power 1.5 kW
Maximum Cutting Width 800 mm
Minimum Cutting Thickness 10 mm
Maximum Cutting Thickness 80 mm

Specifications
1. Wet type mosaic cutting machine is suitable for cutting big floor and wall tiles into narrow, square and diamond forms.
2. Wet type mosaic Cutting Machine also can cut tiles into many small ones with different width at one time.Wet type mosaic cutting machine cut wall & floor tile, high cutting efficiency
3. Wet Type Mosaic Cutting Machine is cutting big wall and floor tiles into small ones including mosaic. The processing width of wet type ceramic tile Cutting Machine is 25-600mm.
4. Wet type mosaic Cutting Machine also can precut tile first and then cut off at last.
5. Due to reasonable design and high working precision, it has the advantage of high cutting efficiency, high precision and high production.

Applications:
Shaft Cutting Machine is suitable for cut or slotting floor tile and stone, It can cut tile into narrow, Square, Diamond and so on. Can process the tile from 25-600/800mm or 1000/1200 to different size in one time. The characteristic of this machine is high accuracy, Low broken, Big output.

Feature
1. The bearing in bearing box is use water-cooling device to make the bearing not hot after long time use, Delay the bearing is life.
2. Use high quality bearing supporting the front and behind of the main shaft to make the shaft drive with more high precision.
3. Add manual adjust device in the operative panel to make is driver it more easy.
4. Cantilever type structure make the machine drive steady with low failure rate.

Completely rebuilt and upgraded splitting machine for tiles of marble, travertine, tufa and other stones.
Model: SPALERI INOX31
The machine is ready to work three consecutive shifts, for 50,000 running meters, assuming proper lubrication.
The machine was stripped down to its last piece and then rebuilt and upgraded using only its existing chassis:
Upgraded with the installation of the following systems:
Stainless Conveyor belt tensioning system +
Stainless Bearings of tension system +
Stainless Conveyor Belt Fixing Bolts +
Stainless Cutting disc fixing screws +
Cutting Head Bearings: Special low noise + bearings
5mm thick monoblock steel cutting head cover for permanent waterproofing +
Electric or manual Adjustment of cutting heads with precision division system +
Anti-slip belt, 3+2 layers, German+ certified +
3-layer epoxy anti-rust treatment, on all four sides of each metal piece and all directly on perfectly clean metal +
Cutting with two special German WATT electric motors characterized by high torque at low speeds
Internal anti-vibration base on each of the two cutting heads.
Vibration-free operation for producing ultra-thin (6mm, 8mm, 10mm, 12mm) or very thick tiles (80mm), without breaking +
Maximum processing width (cm): 31 +
Maximum processing thickness (cm): 8 +
Main processing engines: Two (2), Power of each engine: 15 KW +
Total power (KW): 31 +
Total weight (Kg): 850 +
Quality category: Italian top category +
Year of rebuild and upgrade: 2023 +
TUV / CE + approved
Attention A: The electrical panel, control panel and electrical installation of each machine are new and installed after receiving the order for security reasons against theft.
Attention B: The machine is located in our factory in Bulgaria, 10km from Promachon, at the entrance of the town of Katuntsi, 500 meters before Farmatech.
Attention C: The machine is ready to work three shifts continuously for 50,000 meters, assuming proper lubrication. It is about the most productive and quality machine of its category.
Attention D: The machine is delivered in 25 working days after receiving the advance payment. Any inspection by the customer is accepted.
Attention Q: Note: Spalieri and SPL are registered trademarks of Spalieri S.p.A +

EM14 Multi-Disc Cutting Machine for Granite & Basalt
• Belt Width: 700 mm
• Working Width: 650 mm
• Working Thickness For Basalt: 10 – 150 mm
• Working Thickness For Granite: 10 – 100 mm
• Number Of Heads: 1
• Diameter Of Disc: 500 – 600 mm
• Cutting Motor Power: 30 kW
• Up – Down Motor Power: 0,75 kW
• Belt Motor Power: 0,75 kW
• Belt Speed: 3 mt / min
• Water Consumption: 125 lt / min
• Total Electric Power: 32 kW
• Machine Dimensions ( W / L / H ): 2450 / 3550 / 1980 mm
https://ekizoglumakina.com/en/product/multi-disc-cutting-machine-for-granite-basalt

CROSS CUTTER M/C FOR MARBLE, CONCRETE, CERAMIC, GRANITE

SQA-600 Hand Swaying Edge Cutting Machine uses jointed structure; the main head can rotate 180 degree and electric up and down.The whole machine has compact structure, fine appearance, stable functions and high processing precision, which suit for edge cutting and milling of small slates, lath and thick ties.

- The powerful Abaco Site Saw MOD-S1 features a 3HP motor and is guided by dual linear bearings on induction hardened chrome bar (Rust Free). The cast aluminum machined working table is for accurate cutting of all types of natural and artificial stone. The MOD-S1 Saw is suitable for construction sites and workshops. Incorporated in the MOD-S1 are wheels and rollers for effortless single-handed transportation. Model S1 features an electric direct drive submersible water pump.

- Saw can be provided with 3 HP single phase motor or 5HP three phase motor.

- Switch contains thermal circuit breaker, protecting against overload and short circuit condutions.

- One side bench with rollers plus 2 side support arms.

- Guided by dual linear bearings on induction hardened chrome bar- (Rust Free).

- Bolted down Cast aluminum machined, working table.

1.It suitable for splitting all types of natural and artifical stones, used for Cobble stones, Paving stones,
Tiles for paving and cladding, Wall stones and Kerb stones, etc.
2. The hydraulic system and electrical system used high quality and reliable components.
3. Our splitting machine is high speed, good quality, low consumption.

PLC400 /PLC600 laser bridge cutting machine is to cut the slab into required standard size slab accrately.

PLC700 is an improved series laser bridge cutting machine with cutting head available to title 45 degrees

WANLONG PLC series laser bridge cutting machines are quite suitable for high-valued and large size natural stones cutting and processing.

Stone available to process: granite, marble, limestone, travertine, basalt, sandstone, soapstone, etc.

EM04 Hydraulic Mosaic Stone Crushing Machine
• Working Width: 10 – 70 mm
• Working Hight: 20 – 100 mm
• Working Length: 10 – 250 mm
• Belt Width: 75 mm
• Belt Motor Power: 0,37 kW
• Hydraulic Motor Power: 4 kW
• Hydraulic Tank Capacity: 60 lt.
• Working Pressure: 110 bar
• Machine Dimension ( W / L / H ): 1400 x 1100 x 1100 mm
• Automatic Crushing Control With Sensor

This machine splits the tile into 2 parts. We put the tile in horizontal way on the belt, and we specify the thickness of horizontal split. We must regulate the thickness manually by moving the head of the disk up and down. It has 2 horizontal heads. The belt is controlled by an inverter.
Horizontal heads: 2
2 heads with 1 horizontal disk each: 625 mm
Cutting width: 200-420 mm
Cutting thickness: 13-80 mm
Splitting thickness 13-40 mm
2 motors for the disks of 625 mm (RPM:1420 rotation): 22.5 kw
One variable Gearbox for the belt: 0.75 kw
General power: 45.75 kw
Overall dimensions (LxWxH): 3200x1200x1800 mm

1.It suitable for splitting all types of natural and artifical stones, used for Cobble stones, Paving stones,
Tiles for paving and cladding, Wall stones and Kerb stones, etc.
2. The hydraulic system and electrical system used high quality and reliable components.
3. Our splitting machine is high speed, good quality, low consumption.

Marble, limestone, travertine tile Trimming Machine

MRF is the new automatic trimmer for cutting in a single movement marble, granite, natural stone and ceramic.
The trimming machine is composed of a conveyor belt and two discs with adjustable trimming sizes, in width and in height, by a manual handwheel.
To optimize cutting, according to the thickness and type of material to be processed, the speed of the conveyor belt can be adjusted through the variator.
The MRF is also equipped with a lateral guidance system and upper pressure that allows you to guide the material in the cutting phase, ensuring quality production, low operating costs with minimal space and the use of unskilled personnel, thanks to the ease of use.