If you need our help, we will be glad to help you until you find your products.
Skype: StoneContact.com
WhatsApp/Wechat: +86-17689946988
Clear All
Compare (0/4)
Home ProductsStone MachineryStone Quarry MachinesStone Chain Saw MachinesQuartzite Chain Saw Machines
Quartzite Chain Saw Machines
( 34 )Stonecontact.com offers a wide range of chainsaw stone cutting machines and other cutters in multiple sizes and designs. Quarry Chain Saw Machines are designed for use in medium hardness stone quarries such as marble, limestone, sandstone, tuff stone etc. But it can also be used in the extraction of hard rocks such as granite from the quarry with the suitable cutting segments for the hardness of the stone. Quarry Chain Saw Machines can also cut on uneven ground, like cutting on 15 degree slope and also can cut stone blocks without water. Quarry Chain Saw Machines can blindly cut, don't need to drill ahead of time or do any early work. They can save auxiliary time and large air compressor equipment. Cutting surface is very smooth, it can improve the condition of mines, and the blocks are square and don't need to be trimmed again. Quarry Chain Saw Machines are quiet and safe in operation, have a good working environment and low labor intensity, only need one person to operate. Quarry Chain Saw Machines have high cutting efficiency while continuously cutting, in the case of 3000mm cutting depth type, 10 hours continuously working can cut 60 square meters of cutting surface. Cutting cost is lower than that of diamond wire saw machines.
More Hide-
Add To CompareType: Stone Quarry MachinesStone Chain Saw MachinesSquaring Chain Saw Machines
FOB Price:$69500-99700
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
GD-CS3200 marble chain saw is the special marble quarrying equipment, which consists of a host, moving platform, rails, chain arm, chain, hydraulic system, electric control system, chain lubrication pump and other parts. Chain arm, cutting chain and the machine move on the rails, the machine can rapidly adjust oil cylinder action by the hydraulic pressure drive. The chain arm may rotate in 360 degree for vertical and horizontal cutting which can translate freely according to the mining requirement. The cutting chain is transmitted by motor through a gearbox, making stepless speed regulation within 0-1.2m/s by frequency control chain speed. The hydraulic motor drives the platform moving back and forth and the 360 degree rotation of chain arm, both having two speeds (fast and slow); The cutting speed can be adjusted according to the hardness of stone; The hydraulic system is equipped with automatic heating and air cooling device, which can ensure the equipment can work normally when the environment temperature difference is substantial; This equipment is suitable for quarrying the secondary level marble blocks.
SHUINAN MACHINE
4YR
China
XIAMEN SHUINAN MACHINE CO.,LTD.
Contact Supplier
-
Add To CompareType: Stone Quarry MachinesStone Chain Saw MachinesBackhoe Squaring Chain Saw
FOB Price:
Warranty: 12 Months
Usage: Marble, Limestone, Quartzite, Sandstone, Travertine
Machinery Function Features:
Chain saws machines, Stationary machines for laboratory / sawmill
Chain saw machine
The chain saw model CST 965 is a cutting chain mounted on the rear of a wheeled tractor cab, called Terna.
The machine is self powered and is autonomous both in handling and positioning. It can perform vertical cuts up to the maximum depth of 3.25 meters on marble, limestone and stone materials of similar hardness. The machine is ideal for squaring blocks and for the making series of front cuts.
Arms and chains are available for cutting up to 3.25 meters.
Our company offers the possibility to mount the following chains in order to optimize cutting performance on different materials:
chains 38/40/42 mm with 8 edges tools
42 mm chain with 4 edges tools ;
38/40/42 mm chain with PCD tools for hard stones
TECHNICAL FEATURES
Terna CST 965
Arm rotation 90°
Vertical stroke 3000 mm
Orizontal stroke 2000 mm
Available lenghts of arm (Useful cut) da/from 2 m – a/to 3.25 m
Cut width 38-40-42 mm
Weight of cutting unit 3500 kg
Total weight, including tractor 10.000 kg
Grease tank capacity 7 kg
Grease capacity 0,3 – 1 kg
Hydraulic oil tank capacity 150 litri / litres
Diesel comsumption 7 – 10 l/h
Round per minutes of the chain rotation pinion 65 rpm
Round per minutes of the diesel engine 1400-1500 rpm
Rear gear movement maximum slope 21%
Accessories for chain saw
VACUUM
Vacuum designed to remove large quantities of dust and of the waste granular material produced by the chain saw cutting.
The waste material is removed from the accumulation zone adjacent to the cut by means of a fl exible hose and of a suction cup.
The vacuum can be installed on a trailer moving on the rails along with the chain saw.
The waste material is deposited on the ground, in the opposite side of the cut.
WORM
Worm designed to carry and to remove automatically large quantities of dust and of the waste granular material produced by the chain saw cutting.
The cut waste material is carried in the feed-box of the worm, and then deposited on the ground, at 2 meters distance from the cut.
CHAINS
1 – CHAIN PITCH 121MM
Larghezza di taglio 38 mm
Sono disponibili portainserti per utensili tipo:
– WIDIA 8 Taglienti
– PCD Ø 13 mm
– PCD 8 mm
2 – CHAIN PITCH 110MM
Cutting width 42
Available toolholders for tools type:
– WIDIA 4 Cutting edges
– PCD Ø 13 mm
– PCD 9.4 mm
3 – MONO-LINK CHAIN 74 MM PITCH
Cutting width 42
Available toolholders for tools type:
– WIDIA 4 Cutting edges
– PCD Ø 13 mm
– PCD 9.4 mm
Benetti
Italy
Benetti Macchine Spa
Contact Supplier
-
Add To CompareType: Stone Quarry MachinesStone Chain Saw MachinesBank Chain Saw Machines
FOB Price:$105000-118000
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Our CSM series chain saw machines are suitable for dry cutting marble and soft stone. They can be used for multiple purposes and can cut the stone horizontally and vertically.
Features:
High rigidity, ensuring long-term stability and efficient operation;
Friendly man-machine interface, easy to operate and maintain;
PLC integrated control, realizing no dead angle cutting;
The unique hydraulic control system can automatically adjust the cutting parameters according to the hardness of the stone to achieve high-efficiency cutting;
Optional Internet of Things function to realize remote data collection and online monitoring of machine operating conditions, after-sale service and trouble-shooting;
Optional wireless remote control operation mode.
SHUINAN MACHINE
4YR
China
XIAMEN SHUINAN MACHINE CO.,LTD.
Contact Supplier
-
Add To CompareType: Stone Quarry MachinesStone Chain Saw MachinesBank Chain Saw Machines
FOB Price:
Warranty: 12 Months
Usage: Marble, Limestone, Quartzite, Sandstone, Travertine
Machinery Function Features:
Dry cuts, no water supply required.
The products are referred to Italy mainstream manufacturers’design, reasonable layout and structure, convenient operation.
The gear boxes are planetary gear boxes, large bearing capacity, supplied by Italian producer.
The rails and trolleys are made of alloy steel, big bearing capacity and deformation resistant.
The hydraulic components are also from Italy.
The main oil pumps and hydraulic motors are made in Germany.
The electrical components are mainly from Schneider Electric.
The chain arms are made of high strength steel from Sweden.
The cutting chains are made of wear-resistant steel from Sweden
The bearings and oil seals are the Japanese brands.
ZHONGZHU
China
Shanghai Zhongzhu Industrial Co., Ltd
Contact Supplier
-
Add To CompareType: Stone Quarry MachinesStone Chain Saw MachinesBank Chain Saw Machines
FOB Price:
Warranty: 12 Months
Usage: Marble, Limestone, Quartzite, Sandstone, Travertine
Machinery Function Features:
The chain saw machine model ”NF-7.1” is designated for the extraction of marble and stone blocks in the open sky quarries using the most recent technologies. The chain saw “NF-7.1” permits to improve the performances and to reduce to minimum the cost of the cut.
The chain saw “NF-7.1” is universal: it can execute vertical and horizontal cuts on materials with compression strength higher than 150 Mpa. The movement of the machine is made through a sprocket and rack element assembled on the rails.
Faudi Group
Italy
Faudi Group
Contact Supplier
-
Add To CompareType: Stone Quarry MachinesStone Chain Saw MachinesTunnel Chain Saw Machines
FOB Price:
Warranty: 12 Months
Usage: Marble, Limestone, Quartzite, Sandstone, Travertine
Machinery Function Features:
Fantini Tunnel Chain saw machine GU 70-R-XC Sawmill Machine for Tunnels
Installed power: 60 kW
Weight: 30,000 Kg
Electrical power supply: 400V/50 Hz
Cutting depth: 3.0 m (XXL)
Tunnel height: 5.15-5.62 m max
GU70RXC
Sawmill Machine for Tunnels
Chain Saw Model GU70RXC is the most popular machine in the world for opening up and exploring a tunnel cave. Thanks to a lanyard positioned on the front frame, the track carrying the arm can rotate by 360 ° to allow vertical and horizontal cuts at the tunnel face.
A single operator is sufficient to operate the machine (this model includes a radio remote control and a jack on the standard crawler undercarriage). This model can run cuts 3.2 metres deep into hard stone and marble.
The machine can be configured according to the customer’s specific requirements.
Fantini
Italy
Fantini Sud SPA
Contact Supplier
-
Add To CompareType: Stone Quarry MachinesStone Chain Saw MachinesBackhoe Squaring Chain Saw
FOB Price:
Warranty: 12 Months
Usage: Marble, Limestone, Quartzite, Sandstone, Travertine
Machinery Function Features:
Dry cuts, no water supply required.
The products are referred to Italy mainstream manufacturers’ design, reasonable layout and structure, convenient operation.
The gear boxes are planetary gear boxes, large bearing capacity, supplied by Italian producer.
The rails and trolleys are made of alloy steel, big bearing capacity and deformation resistant.
The hydraulic components are also from Italy.
The main oil pumps and hydraulic motors are made in Germany.
The electrical components are mainly from Schneider Electric.
The chain arms are made of high strength steel from Sweden.
The cutting chains are made of wear-resistant steel from Sweden
The bearings and oil seals are the Japanese brands.
ZHONGZHU
China
Shanghai Zhongzhu Industrial Co., Ltd
Contact Supplier
-
Add To CompareType: Stone Quarry MachinesStone Chain Saw MachinesSquaring Chain Saw Machines
FOB Price:
Warranty: 12 Months
Usage: Marble, Limestone, Quartzite, Sandstone, Travertine
Machinery Function Features:
Terna FANTINI
Block Sawing Machine
The Terni Fantini is a machine made from a rubber tired JCB vehicle and a group of Fantini cutters. The extreme versatility of its’ rubberised four-wheel drive allows you to reach cutting areas quickly, whether they are: blocks spread over the quarry, banks on the ground or even cuts executed directly at the front of the bank.
As the machine travels to the block and not the other way round, the Fantini back allows you to save time and money. The operator works from a cabin, protected from atmospheric agents, without needing auxiliary staff, and the cuts are executed dry. The cutting capacity standard is 3.4 metres (length) and 3.0 metres (height).
Techncial Specifications
Installed power: 68.6 Kw
Tractor weight: about 7,000 Kg
Cutting unit weight: 2,000 Kg
Arm rotation: 90°
Useful for cuts of up to 3.9 metres
Chain speed: 0-0.7 m/sec
Thickness of cut: 27 mm – 38 mm
Tractor transit speed: 40 km/h
Technical characteristics may be subject to variations
Fantini
Italy
Fantini Sud SPA
Contact Supplier
-
Add To CompareType: Stone Quarry MachinesStone Chain Saw MachinesSquaring Chain Saw Machines
FOB Price:
Warranty: 12 Months
Usage: Marble, Limestone, Onyx, Quartzite, Sandstone, Travertine
Machinery Function Features:
70BU-C Block Sawing Machine
Chain Saw Model 70BU-C is a self-propelled crawler for vertical cutting, and can be fitted with arms that can cut up to 4.0 metres deep.
The machine is fitted with a unique self-propelled track with hydraulic stabiliser feet. It can autonomously move into different areas of a quarry to make cuts into floors or square off blocks, without the need for water.
The machine is fitted with a diesel engine which allows completely autonomous operation, eliminating the need for any electrical wiring connections to generators or power grids.
This model is particularly useful in working environments that are not connected to the power grid.
70BU-C
Installed power: 80 Kw
Weight: 15,500 Kg
Arm rotation: 360°
Speed: 1 Km/h on tracks
Technical Specifications
Chain speed: 0-0.7 m/sec
Thickness of cut: 27 mm – 38 mm
Useful cutting depth: 4.10 metres max.
Cutting speed: 0-25 cm/min
Translation speed on tracks: 1 km/h
Technical characteristics may be subject to variations
Fantini
Italy
Fantini Sud SPA
Contact Supplier
-
Add To CompareType: Stone Quarry MachinesStone Chain Saw MachinesBank Chain Saw Machines
FOB Price:
Warranty: 12 Months
Usage: Marble, Limestone, Quartzite, Sandstone, Travertine
Machinery Function Features:
The 70RABU chain saw machine features a cutting capacity of up to 5.1 m and is even suitable for use with marble and other very hard stones. The machine is operated by a hydraulic system with variable capacity main pump driven by an electric motor, and can execute horizontal and vertical cuts without the need for water cooling.
The main feature of this machine is the single rail that allows it to be repositioned longitudinally rapidly and without the need for lifting equipment.
Technical Specifications
Installed power: 50 Kw
Weight: 6,200-6,700 Kg
Arm rotation: 360°
Chain speed: 0-0.7 m/sec
Cutting width: 38 mm
Effective cutting depth: 5.10 m max
Cutting speed: 0-13 cm/min
The technical specifications may be subject to change
Fantini
Italy
Fantini Sud SPA
Contact Supplier
-
Add To Compare
Type: Stone Quarry MachinesStone Chain Saw MachinesBank Chain Saw Machines
Warranty: 12 Months
Usage: Marble, Limestone, Quartzite, Sandstone, Travertine
Machinery Function Features:
The 70 SUPER /H chain saw machine is the most powerful model in the FANTINI range.
It features a vertical cutting capacity of up to 8.0 m and provides excellent results with both marble and other types of hard stone. The machine is operated by a hydraulic system with variable capacity main pump driven by an electric motor.
The electro-hydraulically operated controls guarantee power and speed in all operating conditions and the machine can execute horizontal and vertical cuts without the need for water cooling.
Technical Specifications
Installed power: 61 Kw
Weight: 9,600Kg
Arm rotation: 360°
Chain speed: 0-0.7 m/sec
Cutting width: 38 mm
Effective cutting depth: 8 m max
Cutting speed: 0-15 cm/min
The technical specifications may be subject to change
Fantini
Italy
Fantini Sud SPA
Contact Supplier
-
Add To Compare
Type: Stone Quarry MachinesStone Chain Saw MachinesBank Chain Saw Machines
Warranty: 12 Months
Usage: Marble, Limestone, Quartzite, Sandstone, Travertine
Machinery Function Features:
The Fantini 50.81 chain saw machine is designed for use in medium hardness stone quarries and can execute cuts to a depth of up to di 3.4 m. In the case of hard type marble and stone, the cutting depth is reduced to 2.8 m.
The machine can perform horizontal and vertical cuts without the need for cooling water and is available in either the modular rail (RA/P), or single rail (BU), version; in the latter configuration, the machine can be repositioned by moving it along a single rail, without the need for lifting equipment.
Technical Specifications
Installed power: 50 Kw
Weight: 5,200-5,700 Kg
Arm rotation: 180°
Chain speed: 0-0.7 m/sec
Cutting width: 38 mm
Effective cutting depth: 3.40 m max
Cutting speed: 0-13 cm/min
The technical specifications may be subject to change
Fantini
Italy
Fantini Sud SPA
Contact Supplier
-
Add To Compare
Type: Stone Quarry MachinesStone Chain Saw MachinesBank Chain Saw Machines
Warranty: 12 Months
Usage: Marble, Limestone, Quartzite, Sandstone
Machinery Function Features:
Electrical Motor Total Power: 48 KW
Chain Rotation Speed: 0-900 mm/s
Useful Cutting Depth: 3400mm (@70°)
Cutting Speed: 0,5-4 (m/hr)
Arm Rotation: 360°
Oil Tank Capacity: 180lt
Grease Tank: 25lt
Width of Cut: 38mm
Total Weight: 5950 kg
Rail Weight: 750kg
Width: 1770mm -
Add To Compare
Type: Stone Quarry MachinesStone Chain Saw MachinesBank Chain Saw Machines
Warranty: 12 Months
Usage: Marble, Limestone, Quartzite, Sandstone, Travertine
Machinery Function Features:
Chain saw on which all drives are electric and controlled by Inverters. The higher energy efficiency with respect to hydraulic systems and the specific tool arrangement offer significantly better cutting speeds and tool life.
A modern heavy-duty chain saw for sedimentary stone quarries,where the machine can perform cuts both vertical and horizontal.
The machine is driven entirely by electric motors to reduce energy demand (due to the higher efficiency with respect to hydrostatic transmissions) also eliminating maintenance problems typical of hydraulic circuits.
The machine consists of the following main parts:
Frame
The welded steel frame is extremely rigid in both torsion and bending to ensure the absence of deformation guaranteeing limited mechanical loads on the cutting arm and long tool life.
Main Motor
The main 30 kW motor operating at variable speed under the control of an Inverter, driving the chain itself, through an epicycloid gearbox.
The blade rotation system, also with a variable speed motor (Inverter controlled) and an irreversible double worm and crown gearbox for blade rotation;
The motorised blade-swing system, with a 0,75 kW Motor that positions
the blade horizontally or vertically.
Variable speed 3 kW motor with a speed reducer and rack and pinion system, to drive the machine along the track.
A pump set for blade pinion and chain lubrication, with 0,25 Kw motor
Electric panel
The electric panel and switchboard with controls and commands with emergency machine stop in case of anomalies.
- a set of inverters for the main motors - a cutting speed control system
- all manual and automatic controls - current absorption on all motors control system - safety and emergency protection devices
Blade
Available in lengths suitable for cutting depths from 2 to 5.6 m, the blade is in special high strength and wear-resistant steel. The blade incorporates channels for both lubricant pipework and for cooling water or air.
The blade edges are machined and drilled to house the wear-plates on which the chain runs during cutting; these replaceable plates are in hardened and tempered steel.
Chain
The special steel chain consists of 8 tool-carrier links. The first 5 links carry one tool, while the others each have two in stepped positions.
This patented arrangement offers high cutting speeds and the best possible resistance to tool wear and breakage. The tools are normally in Tungsten Carbide size 12,7 x 12,7 x 6,5mm and are fastened by a screw so that each tool can be used up to eight times
Track (Rail)
Three tracks are provided (more on request) each of 3m length, and complete with anchoring systems to fasten the machine to the quarry floor.
The three-track system allows continuous machine operation; when track 2 is reached, track 1 can be placed ahead of track 3, with no need to stop the machine.
Walking beam type track
A "walking beam" version is also available with a single track of length 7.5m, allowing 5m travel. Using hydraulic cylinders, the machine can be lifted with the track, the latter then being shifted ahead to continue cutting, with no need for other lifting gear.
A large increase in quarry output can be achieved by combining the use of a chain saw and diamond wire saws.
Pellegrini
Italy
Pellegrini Meccanica SpA
Contact Supplier
-
Add To Compare
Type: Stone Quarry MachinesStone Chain Saw MachinesBank Chain Saw Machines
Warranty: 12 Months
Usage: Marble, Limestone, Onyx, Quartzite, Sandstone, Travertine
Machinery Function Features:
The 70RATA sawing machine can cut up to 5.10 m and can even be used for marble and high hardness stones. Thanks to the presence of PLC and Encoders, its main feature is the ability to perform vertical and horizontal cuts in unattended mode, by setting the cutting measurements (depth and length) before execution.
The machine is driven by a hydraulic device with the main, variable flow rate pump driven by an electric motor, and performs horizontal and vertical cutting without the need for cooling water. The electro-hydraulic controls give it the power and speeds suitable for various operating conditions.
Technical Specifications
Installed power: 50 Kw
Weight: 6,200-6,700 Kg
Arm rotation: 360°
Chain speed: 0-0.7 m/sec
Cutting width: 38 mm
Effective cutting depth: 5.10 m max
Cutting speed: 0-13 cm/min
The technical specifications may be subject to change
Fantini
Italy
Fantini Sud SPA
Contact Supplier
-
Add To Compare
Type: Stone Quarry MachinesStone Chain Saw MachinesBank Chain Saw Machines
Warranty: 12 Months
Usage: Marble, Limestone, Quartzite, Sandstone, Travertine
Machinery Function Features:
The Fantini 50.90 chain saw machine is designed for cutting medium soft stone, and cutting and squaring in quarries with sloped banks. It can be supplied with an arm with an effective cutting depth of up to 2.0 m.
The machine can perform horizontal and vertical cuts without the need for cooling water and is available in either the modular rail (P), or single rail (BU), version; in the latter configuration, the machine can be repositioned by moving it along a single rail, without the need for lifting equipment.
Technical Specifications
Installed power: 26.7 Kw
Weight: 3,500-3,900 Kg
Arm rotation: 360°
Chain speed: 0-0.7 m/sec
Cutting width: 38 mm
Effective cutting depth: 2.00 m max
Cutting speed: 0-25 cm/min
The technical specifications may be subject to change
Fantini
Italy
Fantini Sud SPA
Contact Supplier
-
Add To Compare
Type: Stone Quarry MachinesStone Chain Saw MachinesBank Chain Saw Machines
Warranty: 12 Months
Usage: Marble, Limestone, Quartzite, Sandstone, Travertine
Machinery Function Features:
Chain Saw Model 70.RA/PD can make cuts of up to 5.1 metres, and was designed and built to make vertical and horizontal cuts on hard and/or abrasive stones without the need for cooling water.
The machine is fitted with a diesel engine which allows completely autonomous operation, eliminating the need for any electrical wiring connections to generators or power grids. This model is particularly useful in working environments that are not connected to the power grid.
Technical Specifications
Installed power: 77.1 Kw at 1500 rpm
Weight: 10,000 Kg
Arm rotation: 360°
Chain speed: 0.1-0.7 m/sec
Cutting width: 38 mm
Effective cutting depth: 5.10 m max
Cutting speed: 0-13 cm/min
Technical characteristics may be subject to variations
Fantini
Italy
Fantini Sud SPA
Contact Supplier
-
Add To Compare
Type: Stone Quarry MachinesStone Chain Saw MachinesTunnel Chain Saw Machines
Warranty: 12 Months
Usage: Marble, Limestone, Quartzite, Sandstone, Travertine
Machinery Function Features:
Chain Saw Model GU50-SC is a compact version for tunnel extraction work. By setting the cutting depth in automatic mode the machine makes vertical and horizontal cuts against the tunnel face.
It is self-propelled on a track and radio-controlled, and hence completely autonomous in its movements. Only one operator is sufficient to operate the machine. This model can run cuts up to 1.7 metres in depth.
Technical Specifications
Total installed power: 45 KW
Overall weight: 14,000 Kg
Hydraulic tank capacity: 300 litres
Chain rotation speed from 0.1 to 1.7 m/sec.
Blade progress speed under normal operating conditions: 20 cm/min.
Cutting depth: 1.7 metres
Feed speed on tracks: 1 km/h max.
Operating noise level: 75 decibels
Minimum tunnel height: 3,100 mm
Maximum tunnel height: 3,500 mm
Technical characteristics may be subject to variations
Fantini
Italy
Fantini Sud SPA
Contact Supplier
-
Add To Compare
Type: Stone Quarry MachinesStone Chain Saw MachinesBeam Chain Saw Machines
Warranty: 12 Months
Usage: Marble, Limestone, Quartzite, Sandstone, Travertine
Machinery Function Features:
SQB/P Sectioning Sawing Machine
The chain mode sectioning sawing machine SQB/P is a hydraulic machine consisting of a portal that runs on tracks with a horizontal arm capable of vertical cuts for the squaring off and blocking of hard and/or abrasive stones. The cuts are programmable by means of a computerised system loaded with positioning and cutting parameters.
Once the cutting sequence has been programmed, the machine can operate in an automatic cycle, even during night-time hours, without requiring any operator interventions.
Fantini cutting machines can be customised using high automation systems depending on customer requirements.
Technical Specifications
Power installed: 50 kW
Max. cutting width (L): 3,500/4,000 mm
Max. cutting height (H): 2,500 mm
Variable chain speed: 0-2 metres/ sec
Variable arm descent: 0-15 cm/min
Width of cut: 27 mm – 38 mm
Machine travelling speed on tracks: 3-30 metres/min
Weight: 14,000 Kg
Technical characteristics may be subject to variations
Fantini
Italy
Fantini Sud SPA
Contact Supplier
-
Add To Compare
Type: Stone Quarry MachinesStone Chain Saw MachinesBeam Chain Saw Machines
Warranty: 12 Months
Usage: Marble, Limestone, Onyx, Quartzite, Sandstone, Travertine
Machinery Function Features:
The chain mode sectioning sawing machine SQB/P is a hydraulic machine consisting of a portal that runs on tracks, and a horizontal arm that can make vertical cuts for squaring off and blocking hard and/or abrasive stones. The cuts can be programmed by means of a computerised system loaded with positioning and cutting parameters.
Once the cutting sequence has been programmed, the machine can operate in an automatic cycle, even during night-time hours, without the need for interventions by an operator.
Fantini cutting machines can be customised with high automation systems, according to customer requirements.
Technical Specifications
Power installed: 50 kW
Max. cutting width (L): 3,500/4,000 mm
Max. cutting height (H): 2,500 mm
Variable chain speed: 0-2 metres/ sec
Variable arm descent: 0-15 cm/min
Width of cut: 27 mm – 38 mm
Machine travelling speed on tracks: 3-30 metres/min
Weight: 14,000 Kg
Technical characteristics may be subject to variations
Fantini
Italy
Fantini Sud SPA
Contact Supplier
-
Add To Compare
Type: Stone Quarry MachinesStone Chain Saw MachinesBeam Chain Saw Machines
Warranty: 12 Months
Usage: Marble, Limestone, Quartzite, Sandstone
Machinery Function Features:
The grease loading station is an useful equipment for the ordinary maintenance of Fantini chain saw machines. It includes a compressor, a tank, a greasing pump necessary for recharge the grease for the cutting operations. The station can be transported inside the quarry by lifting it through the barycentric hook or by the coupling device to the fork supplied with machines for blocks handling.
Grease capacity: 180 kg
Compressor power: 2,9 kw
Total weight: 450 kg about
Grease pump technical specification
Compression ratio: 50:1
Min pressure: 4 bar
Max pressure: 8 bar
Max capacity: 0.700 kg/min
Supported models:
- All chain saw machines
- All chain saw machines for underground quarries
Fantini
Italy
Fantini Sud SPA
Contact Supplier
-
Add To Compare
Type: Stone Quarry MachinesStone Chain Saw MachinesBank Chain Saw Machines
Warranty: 12 Months
Usage: Granite, Marble, Quartzite
Machinery Function Features:
CHAIN SAW MACHINE Series 20.90
This chain saw machine has been recently produced to make less deep cut (up to 1.30 m) in soft and medium soft stones. It has a high cutting speed that can reach 8,0/10,0 m l/h depending on the type of stone. The cutting chain is started by an electric motor meanwhile the arm rotation and the translation of the machine are hydraulically operated. The chain saw can make horizontal and vertical cut without water.
One rail version (BU):
The chain saw has one translating rail of 5.00 mt controlled by the push button panel. It allows a fast longitudinal replacement of the chain saw without the help of any lifting devices.
Fantini
Italy
Fantini Sud SPA
Contact Supplier
-
Add To Compare
Type: Stone Quarry MachinesStone Chain Saw MachinesTunnel Chain Saw Machines
Warranty: 12 Months
Usage: Marble, Limestone, Quartzite
Machinery Function Features:
UNDERGROUND MACHINE Mod. SV-C 50
Special chain saw machine for back cut of blocks in the underground quarry.
Total power 30 KW
Hidrostatic transmission with variable speed pump
Weight Kg. 8.000
Useful cut up to 1.60 mt (on the right side as well as on the left side)
Hydraulic oil tank capacity Lt. 150
Chain rotation speed from 0,1 to 0,7 mt./sec.
Arm cutting speed rate up to 15 cm/min.
Grease capacity up to 500gr/h
Noise level rate: 85 decibel
Max speed on tracks 1,5 km/h
Chain saw dimensions:
L: 4.600 mm La: 1.300 mm
Fantini
Italy
Fantini Sud SPA
Contact Supplier
-
Add To Compare
Type: Stone Quarry MachinesStone Chain Saw MachinesBackhoe Squaring Chain Saw
Warranty: 12 Months
Usage: Marble, Limestone, Quartzite, Sandstone
Machinery Function Features:
MOBILE CHAIN SAW FOR SQUARING BLOCKS Chain saw on tractor JCB
The Fantini cutting system has been produced for squaring the blocks on the face wall as well as in the working areas of the quarry. The cutting unit is transported on a wheeled tractor fast moving and positioning in front of the blocks to be squared. The whole operation is fast and does not need any auxiliary personnel nor water.
Power: 68,6 Kw
- Weight of tractor t: about 7.000 Kg
- Weight of cutting unit: 2.000 Kg
- Arm rotation: 90°
- Useful cut up to 4 m.
- Chain speed: 0-0,7 mt/sec
- Cutting thickness : 38 mm
- Tractor translation speed: 40 km/h
Fantini
Italy
Fantini Sud SPA
Contact Supplier
-
Add To Compare
Type: Stone Quarry MachinesStone Chain Saw MachinesTunnel Chain Saw Machines
Warranty: 12 Months
Usage: Marble, Limestone, Quartzite, Sandstone, Travertine
Machinery Function Features:
The dust Aspirator completely removes the dust in the horizontal cut position as well as in the vertical one. The dust is unload at one side of the sliding rail by a worm screw system.
Before entering in the filtering chamber the dust passes through a pre-chamber which allows to remove the big parts.
- Tender version
The dust aspirator is placed on the rail of the machine and translates with the machine.
Supported models:
-70 sup-H
-70 rap
-50.81
- Static version
The dust aspirator is fixed in the cutting area and connected to the chain saw machine by a suction unit.
Supported models:
- All chain saw machines
- All chain saw machines for underground quarries
Power : 9.0 Kw
Weight : 1.500K g:
Length : 2.660 mm
Width: 1.650 mm
Height: 3.030 mm
Fantini
Italy
Fantini Sud SPA
Contact Supplier
-
Add To Compare
Type: Stone Quarry MachinesStone Chain Saw MachinesTunnel Chain Saw Machines
Warranty: 12 Months
Usage: Granite, Marble, Quartzite
Machinery Function Features:
UNDERGROUND MACHINE Mod. Gu.50-R-SC/T
This chain saw can make vertical and horizontal cut against the underground face wall. It is a self propelled machine on tracks and completely autonomous in movements, besides it is equipped with a rotation fifth wheel. Only one operator is needed to operate the chain saw. This model of machine can make a cut until 2,0 m of depth in hard stones.
Fantini
Italy
Fantini Sud SPA
Contact Supplier
-
Add To Compare
Type: Stone Quarry MachinesStone Chain Saw MachinesBank Chain Saw Machines
Warranty: 12 Months
Usage: Marble, Limestone, Quartzite
Machinery Function Features:
If requested it is possible to install on Fantini chain saw machine a steel frame lifting module for better transport and positioning the chain saw machine in the quarry.
The steel frame lifting module also protects the chain saw.
Supported models:
-70 sup-H current model
-70 rap
-50.90 current model
-50.81
-20.90 current model
Fantini
Italy
Fantini Sud SPA
Contact Supplier
-
Add To Compare
Type: Stone Quarry MachinesStone Chain Saw MachinesBank Chain Saw Machines
Warranty: 12 Months
Usage: Marble, Limestone, Quartzite, Sandstone
Machinery Function Features:
TECHNICAL SPECIFICATIONS
Model ST 450.2 VH
Power of main electric motor 45 Kw / 61 Hp
Hydraulik tank capacity 160 Lt.
Cutting width 42 mm
Useful cutting depth 4,20 mt (max)
Rotation of cutting jib 360°
Weight 5.100 kg.
This model is designed for open top quarries.
Korfmann Cut Machinery
Italy
Korfmann Cut Machinery s.r.l
Contact Supplier
-
Add To Compare
Type: Stone Quarry MachinesStone Chain Saw MachinesTunnel Chain Saw Machines
Warranty: 12 Months
Usage: Marble, Limestone, Onyx, Quartzite, Sandstone, Travertine
Machinery Function Features:
Electric diamond belt sawing machine, designed to make tunnel cuts, vertical and horizontal. The JET BELT 940 is composed of two columns with two telescopic extensions for the machine fixing, connected with an horizontal beam of 462 cm that bears the electric cutting unit. This is composed of the main motor and the cutting arm with the diamond belt installed. The column bases are motorized for an easy positioning of the whole structure. The cutting tool consists of aspecial plastic belt with sintered diamond segments. Only water is used during the cutting phase, both for lubrication and cooling, so that no dust is produced during the cutting phase. Another advantage of diamond belt cutting system respect to the traditional one, is that no grease or oil are used, so that the cut is very clean and free from pollution load.
Intermek
Greece
INTERMEK S.A.
Contact Supplier
-
Add To Compare
Type: Stone Quarry MachinesStone Chain Saw MachinesBank Chain Saw Machines
Warranty: 12 Months
Usage: Marble, Limestone, Quartzite, Sandstone
Machinery Function Features:
CHAIN SAW MACHINE mod. HSTK450 2VH
CARATTERISTICHE TECNICHE
TECHNICAL SPECIFICATION
Model HSTK 450.2 VH
Power of main electric motor 45 Kw / 61 Hp
Hydraulik tank capacity 160 Lt.
Operation speed 0 - 44 cm/min
Cutting width 42 mm
Useful cutting depth 2,75 mt (max)
Rotation of cutting jib 360°
Weight of the machine 6.900 kg
Weight of the hydraulic device 1.450 kg
This model is designed for underground quarries, the max cutting height is 4.500 mm.
Korfmann Cut Machinery
Italy
Korfmann Cut Machinery s.r.l
Contact Supplier
-
Add To Compare
Type: Stone Quarry MachinesStone Chain Saw MachinesTunnel Chain Saw Machines
Warranty: 12 Months
Usage: Marble, Limestone, Quartzite, Sandstone
Machinery Function Features:
CARATTERISTICHE TECNICHE
TECHNICAL SPECIFICATION
Model HSTK 450.2 VH
Power of main electric motor 45 Kw / 61 Hp
Hydraulik tank capacity 160 Lt.
Operation speed 0 - 44 cm/min
Cutting width 42 mm
Useful cutting depth 2,75 mt (max)
Rotation of cutting jib 360°
Weight of the machine 6.900 kg
Weight of the hydraulic device 1.450 kg
This model is designed for underground quarries, the max cutting height is 4.500 mm.
Korfmann Cut Machinery
Italy
Korfmann Cut Machinery s.r.l
Contact Supplier
-
Add To Compare
Type: Stone Quarry MachinesStone Chain Saw MachinesBank Chain Saw Machines
$119000-130000
Warranty: 12 Months
Usage: Marble, Onyx, Artificial Stone, Quartzite, Sandstone
Machinery Function Features:
The basic quarry chain saw model. The chain saws are placed on the stone and the rails are used interchangeably
Each machine can cut both vertical and horizontally
Dry cut, no need to supply of water
Wide application range of quarry and high working efficiency
Yunfu Xinda Machinery
China
Yunfu Xinda Machinery Co., Ltd
Contact Supplier
-
Add To Compare
Type: Stone Quarry MachinesStone Chain Saw MachinesTunnel Chain Saw Machines
$139900-169900
Warranty: 12 Months
Usage: Marble, Limestone, Slate, Onyx, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Underground chain saw can extract high grade marble directly without striping mmaintain skins or soils.
Less requirement on lamd expropriation, less wastes and rubbles, less cost on deslag and revegetation, less environment damage.
Better block shape and higher yield rate
High extracting efficiency without being affected by wether. Even higher efficiency of future expending extracting to sides or downward
Low overall cost and low risks. High long term benefits
Yunfu Xinda Machinery
China
Yunfu Xinda Machinery Co., Ltd
Contact Supplier
-
Add To Compare
Type: Stone Quarry MachinesStone Chain Saw MachinesBank Chain Saw Machines
Warranty: 12 Months
Usage: Granite, Marble, Quartzite
Machinery Function Features:
Orbital-type chain saw is the most basic type,the rails used interchangeably in working, suitable for open-pit mine,each machine can be designed to have two working mode--- vertical and horizontal cutting; Orbital-type chain saw can be designed into the single rail longitudinal mobile model.
Zhongzhu
China
Shang Hai Zhongzhu Industrial CO.,LTD
Contact Supplier
- 1
Have a Question? Ask our expert
Ask now
Questions & Answers on Quartzite Chain Saw Machines
What are quarry chain saw machines max useful cut depth?
Posted by Visitor
Reply to this question
Post ReplyCancel
It is around 2500 to 3000 mm depending on the model of the machine and the hardness of the stone.
Answered by StoneContact
Like
Can a quarry chain saw machine cut granite?
Posted by Visitor
Reply to this question
Post ReplyCancel
Quarry chain saw machines are designed for use in medium hardness stone quarries but with the suitable cutting segments they also can be used in granite quarries.
Answered by StoneContact
Like
What is quarry chain saw machines average cutting speed?
Posted by Visitor
Reply to this question
Post ReplyCancel
The slope of the ground and the hardness of the stone affect the cutting speed of the machine, but they can cut 0~4 meters per hour on average.
Answered by StoneContact
Like
