2022-05-18 17:27:48
Match Your Image Post Your Needs

Stone Chain Saw Machines

( 62 )

Stonecontact.com offers a wide range of chainsaw stone cutting machines and other cutters in multiple sizes and designs. Quarry Chain Saw Machines are designed for use in medium hardness stone quarries such as marble, limestone, sandstone, tuff stone etc. But it can also be used in the extraction of hard rocks such as granite from the quarry with the suitable cutting segments for the hardness of the stone. Quarry Chain Saw Machines can also cut on uneven ground, like cutting on 15 degree slope and also can cut stone blocks without water. Quarry Chain Saw Machines can blindly cut, don't need to drill ahead of time or do any early work. They can save auxiliary time and large air compressor equipment. Cutting surface is very smooth, it can improve the condition of mines, and the blocks are square and don't need to be trimmed again. Quarry Chain Saw Machines are quiet and safe in operation, have a good working environment and low labor intensity, only need one person to operate. Quarry Chain Saw Machines have high cutting efficiency while continuously cutting, in the case of 3000mm cutting depth type, 10 hours continuously working can cut 60 square meters of cutting surface. Cutting cost is lower than that of diamond wire saw machines.

More Hide
  • Quarry Chain Saw Machine
    favorites
    Add To Compare

    Type: Quarry MachinesStone Chain Saw MachinesSquaring Chain Saw Machines

    FOB Price:$69500-99700

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    GD-CS3200 marble chain saw is the special marble quarrying equipment, which consists of a host, moving platform, rails, chain arm, chain, hydraulic system, electric control system, chain lubrication pump and other parts. Chain arm, cutting chain and the machine move on the rails, the machine can rapidly adjust oil cylinder action by the hydraulic pressure drive. The chain arm may rotate in 360 degree for vertical and horizontal cutting which can translate freely according to the mining requirement. The cutting chain is transmitted by motor through a gearbox, making stepless speed regulation within 0-1.2m/s by frequency control chain speed. The hydraulic motor drives the platform moving back and forth and the 360 degree rotation of chain arm, both having two speeds (fast and slow); The cutting speed can be adjusted according to the hardness of stone; The hydraulic system is equipped with automatic heating and air cooling device, which can ensure the equipment can work normally when the environment temperature difference is substantial; This equipment is suitable for quarrying the secondary level marble blocks.
  • CSM 968 Benetti Stone Block Cutter
    favorites
    Add To Compare

    Type: Quarry MachinesStone Chain Saw MachinesBank Chain Saw Machines

    FOB Price:

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Sandstone, Travertine

  • Fantini Bank Chain Saw Machine 70RA/P.AO
    favorites
    Add To Compare

    Type: Quarry MachinesStone Chain Saw MachinesBank Chain Saw Machines

    FOB Price:

    Warranty: 12 Months

    Usage: Marble, Sandstone, Travertine

    Machinery Function Features:

    The 70RA/P chain saw machine is the most popular model in the FANTINI range as well as being the best selling machine of its type in the world. First manufactured in 1979, 70RA/P models can be found in all the most important natural stone extraction centres, and have come to represent the byword for quality and reliability.

    It features a cutting capacity of up to 5.1 m and is even suitable for use with marble and other very hard stones. The machine is operated by a hydraulic system with variable capacity main pump driven by an electric motor, and can execute horizontal and vertical cuts without the need for water cooling. The electro-hydraulically operated controls guarantee power and speed in all operating conditions.

    Technical Specifications

    Installed power: 50 Kw

    Weight: 6,200-6,700 Kg

    Arm rotation: 360°

    Chain speed: 0-0.7 mt/sec

    Cutting width: 38 mm

    Effective cutting depth: 510 m max

    Cutting speed: 0-13 cm/min

    The technical specifications may be subject to change
  • Chain Saw Machine
    favorites
    Add To Compare

    Type: Quarry MachinesStone Chain Saw MachinesBank Chain Saw Machines

    FOB Price:

    Warranty: 12 Months

    Usage: Marble, Limestone, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    The chain saw machine model ”NF-7.1” is designated for the extraction of marble and stone blocks in the open sky quarries using the most recent technologies. The chain saw “NF-7.1” permits to improve the performances and to reduce to minimum the cost of the cut.
    The chain saw “NF-7.1” is universal: it can execute vertical and horizontal cuts on materials with compression strength higher than 150 Mpa. The movement of the machine is made through a sprocket and rack element assembled on the rails.
  • Quarry Chain saw machine Victoria МКB-11
    favorites
    Add To Compare

    Type: Quarry MachinesStone Chain Saw MachinesBank Chain Saw Machines

    FOB Price:

    Warranty: 12 Months

    Usage: Marble, Limestone, Onyx, Sandstone, Travertine

    Machinery Function Features:

    Chain saw machine «Victoria» (МКB-11) — is modern and reliable industrial equipment, the main purpose of which is extraction of stone blocks from quarries. «Victoria» is a multi-purpose machine, it makes all main types of cuts (horizontal cuts and vertical cuts), which allows separating a block from a massive rock.
    The working tool of МКB-11 is a chain saw with quick release cutters, equipped with widia or PCD (polycrystalline diamond) plates.
  • HZK-800 Stone Quarry Blank Chain Saw Machine
    favorites
    Add To Compare

    Type: Quarry MachinesStone Chain Saw MachinesBank Chain Saw Machines

    FOB Price:

    Warranty: 12 Months

    Usage: Marble, Limestone, Sandstone, Travertine

    Machinery Function Features:

    Chain saw machine cutting performance: 7,50 mt depth / 3,40 mt. horizontal.

    - Electrical Motor Total Power: 70 kw.

    - Chain Rotation Speed: 0-45 m/min

    - Max. Cutting Depth: 7500 mm

    - Useful Cutting Depth: 7000 mm

    - Cutting Speed: 0,5-4 m/hr

    - Arm Rotation: 360

    - Oil Tank Cap.: 320lt.

    - Grease Tank: 25lt.

    - Width of Cut: 34mm

    - Total Weight: 11,000 kg.

    - Rail Weight: 1,500 kg.

    - Width: 2,300 mm

    - Length: 10,500mm

    - Height: 2,150mm
  • Rail Type Chain Saw Machine For Marble Quarries
    favorites
    Add To Compare

    Type: Quarry MachinesStone Chain Saw MachinesBank Chain Saw Machines

    FOB Price:$88000-95000

    Warranty: 12 Months

    Usage: Marble, Limestone

    Machinery Function Features:

    Dry cuts, no water supply required.
    The products are self-developed, reasonable layout and structure, convenient operation.
    The gear boxes are planetary gear boxes, large bearing capacity, supplied by Italian producer.
    The rails and trolleys are made of alloy steel, big bearing capacity and deformation resistant.
    The hydraulic components are also from Italy.
    The main oil pumps and hydraulic motors are made in Germany.
    The electrical components are mainly from Schneider Electric.
    The chain arms are made of high strength steel from Sweden.
    The cutting chains are made of wear-resistant steel from Sweden
    The bearings and oil seals are the Japanese brands.
  • Rail Type Chain Saw Machine for Marble Quarry
    favorites
    Add To Compare

    Type: Quarry MachinesStone Chain Saw MachinesBank Chain Saw Machines

    FOB Price:

    Warranty: 12 Months

    Usage: Marble, Limestone, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    Dry cuts, no water supply required.
    The products are referred to Italy mainstream manufacturers’design, reasonable layout and structure, convenient operation.
    The gear boxes are planetary gear boxes, large bearing capacity, supplied by Italian producer.
    The rails and trolleys are made of alloy steel, big bearing capacity and deformation resistant.
    The hydraulic components are also from Italy.
    The main oil pumps and hydraulic motors are made in Germany.
    The electrical components are mainly from Schneider Electric.
    The chain arms are made of high strength steel from Sweden.
    The cutting chains are made of wear-resistant steel from Sweden
    The bearings and oil seals are the Japanese brands.
  • CSM Chain Saw Machine For Dry Cutting Marble And Soft Stone
    favorites
    Add To Compare

    Type: Quarry MachinesStone Chain Saw MachinesBank Chain Saw Machines

    FOB Price:$105000-118000

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Onyx, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    Our CSM series chain saw machines are suitable for dry cutting marble and soft stone. They can be used for multiple purposes and can cut the stone horizontally and vertically.
    Features:
    High rigidity, ensuring long-term stability and efficient operation;
    Friendly man-machine interface, easy to operate and maintain;
    PLC integrated control, realizing no dead angle cutting;
    The unique hydraulic control system can automatically adjust the cutting parameters according to the hardness of the stone to achieve high-efficiency cutting;
    Optional Internet of Things function to realize remote data collection and online monitoring of machine operating conditions, after-sale service and trouble-shooting;
    Optional wireless remote control operation mode.
  • Terna CST 965 Quarry Backhoe Chain saws machine
    favorites
    Add To Compare

    Type: Quarry MachinesStone Chain Saw MachinesBackhoe Squaring Chain Saw

    FOB Price:

    Warranty: 12 Months

    Usage: Marble, Limestone, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    Chain saws machines, Stationary machines for laboratory / sawmill

    Chain saw machine

    The chain saw model CST 965 is a cutting chain mounted on the rear of a wheeled tractor cab, called Terna.

    The machine is self powered and is autonomous both in handling and positioning. It can perform vertical cuts up to the maximum depth of 3.25 meters on marble, limestone and stone materials of similar hardness. The machine is ideal for squaring blocks and for the making series of front cuts.

    Arms and chains are available for cutting up to 3.25 meters.

    Our company offers the possibility to mount the following chains in order to optimize cutting performance on different materials:

    chains 38/40/42 mm with 8 edges tools

    42 mm chain with 4 edges tools ;

    38/40/42 mm chain with PCD tools for hard stones

    TECHNICAL FEATURES

    Terna CST 965

    Arm rotation 90°

    Vertical stroke 3000 mm

    Orizontal stroke 2000 mm

    Available lenghts of arm (Useful cut) da/from 2 m – a/to 3.25 m

    Cut width 38-40-42 mm

    Weight of cutting unit 3500 kg

    Total weight, including tractor 10.000 kg

    Grease tank capacity 7 kg

    Grease capacity 0,3 – 1 kg

    Hydraulic oil tank capacity 150 litri / litres

    Diesel comsumption 7 – 10 l/h

    Round per minutes of the chain rotation pinion 65 rpm

    Round per minutes of the diesel engine 1400-1500 rpm

    Rear gear movement maximum slope 21%

    Accessories for chain saw

    VACUUM

    Vacuum designed to remove large quantities of dust and of the waste granular material produced by the chain saw cutting.

    The waste material is removed from the accumulation zone adjacent to the cut by means of a fl exible hose and of a suction cup.

    The vacuum can be installed on a trailer moving on the rails along with the chain saw.

    The waste material is deposited on the ground, in the opposite side of the cut.

    WORM

    Worm designed to carry and to remove automatically large quantities of dust and of the waste granular material produced by the chain saw cutting.

    The cut waste material is carried in the feed-box of the worm, and then deposited on the ground, at 2 meters distance from the cut.

    CHAINS

    1 – CHAIN PITCH 121MM

    Larghezza di taglio 38 mm

    Sono disponibili portainserti per utensili tipo:

    – WIDIA 8 Taglienti

    – PCD Ø 13 mm

    – PCD 8 mm

    2 – CHAIN PITCH 110MM

    Cutting width 42

    Available toolholders for tools type:

    – WIDIA 4 Cutting edges

    – PCD Ø 13 mm

    – PCD 9.4 mm

    3 – MONO-LINK CHAIN 74 MM PITCH

    Cutting width 42

    Available toolholders for tools type:

    – WIDIA 4 Cutting edges

    – PCD Ø 13 mm

    – PCD 9.4 mm
  • Crawler type chain saw
    favorites
    Add To Compare

    Type: Quarry MachinesStone Chain Saw MachinesSquaring Chain Saw Machines

    Warranty: 12 Months

    Usage: Granite, Marble

    Machinery Function Features:

    Crawler-type chain saw is the enhanced one of orbital-type chain saw,the biggest characteristic of the machine is equipped with a pedrail walking itself,moving conveniently and flexibly. The machine host and pedrail move alternately in working , which don't need to cooperate with other hoisting machinery moving track, suitable for outdoor use in mines. Each machine can be designed to have two kinds of working model--- vertical and horizontal cutting.
  • Parts Chain - Stone Chain Saw Machines
    favorites
    Add To Compare

    Type: Quarry MachinesStone Chain Saw MachinesBank Chain Saw Machines

    Warranty: 12 Months

    Usage: Marble, Limestone, Sandstone

    Machinery Function Features:

    Parts Chain - Stone Chain Saw Machines
  • Fantini Tunnel Chain saw machine GU 70-R-XC Sawmill Machine
    favorites
    Add To Compare

    Type: Quarry MachinesStone Chain Saw MachinesTunnel Chain Saw Machines

    Warranty: 12 Months

    Usage: Marble, Limestone, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    Fantini Tunnel Chain saw machine GU 70-R-XC Sawmill Machine for Tunnels

    Installed power: 60 kW

    Weight: 30,000 Kg

    Electrical power supply: 400V/50 Hz

    Cutting depth: 3.0 m (XXL)

    Tunnel height: 5.15-5.62 m max

    GU70RXC

    Sawmill Machine for Tunnels

    Chain Saw Model GU70RXC is the most popular machine in the world for opening up and exploring a tunnel cave. Thanks to a lanyard positioned on the front frame, the track carrying the arm can rotate by 360 ° to allow vertical and horizontal cuts at the tunnel face.

    A single operator is sufficient to operate the machine (this model includes a radio remote control and a jack on the standard crawler undercarriage). This model can run cuts 3.2 metres deep into hard stone and marble.

    The machine can be configured according to the customer’s specific requirements.
  • Quarry Chainsaw QST3000D ON CAT432d Backhoe
    favorites
    Add To Compare

    Type: Quarry MachinesStone Chain Saw MachinesBackhoe Squaring Chain Saw

    Warranty: 12 Months

    Usage: Marble, Limestone, Sandstone, Travertine

    Machinery Function Features:

    QST3000D chain saw machine on backhoe CAT432 is the last frontier for squaring blocks of marble and stones. QST3000D technology is driven by the very powerful motor of CAT432 and the hydraulic circuit for moving the chain saw was studied together with Caterpillar technicians and our technical staff.The advantages of this technology are a lot o : i.e. you can work day and night and in every weather conditions because the operator inside the cabin can decide the temperatures; you can work without using water ,etc...

    QST3000D works with CAT432 for positioning the blade using the control tools inside the cabin and you can modify the inclination using the stabilizers of backhoe; it's also possible to drive the chain saw trough a remote control outside the cabin.

    All movements for positioning the blade are on double chromate columns allows to have stability and stiffness; this system is unique and only Dazzini QST3000D use it; all movements are driven by single or double hydraulic cylinders (high reliability, simple and no maintenance costs).

    At the end of the cuts, with CAT432 is possible to remove the cuts' dust with only one operator with high safety and speed. CAT432 is 4x4 engine and it can move very easily between quarry's benches for reaching the blocks and starting to square, avoiding to use any other machines.

    QST3000D can use different chain, widiaholders and tools for giving the best cutting solutions for every kind of stones.

    Technical specification:

    •Base : CAT432D

    •Useful cut : 3.40 mt

    •Thickness : 38 mm

    •Chain speed : 0-1.5 mt/sec adjustable

    •Maximun high : 2.20 mt

    •Total lateral movements : 1.75 mt

    •Maximun cutting speed : 1 mt/min

    •Cutting tool : PCD or widia

    •Lubrifications by automatic pump with biodegradable grease

    •NO use of Electric supply
  • Backhoe Chain Saw Block Squaring Machine
    favorites
    Add To Compare

    Type: Quarry MachinesStone Chain Saw MachinesBackhoe Squaring Chain Saw

    Warranty: 12 Months

    Usage: Marble, Limestone, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    Dry cuts, no water supply required.
    The products are referred to Italy mainstream manufacturers’ design, reasonable layout and structure, convenient operation.
    The gear boxes are planetary gear boxes, large bearing capacity, supplied by Italian producer.
    The rails and trolleys are made of alloy steel, big bearing capacity and deformation resistant.
    The hydraulic components are also from Italy.
    The main oil pumps and hydraulic motors are made in Germany.
    The electrical components are mainly from Schneider Electric.
    The chain arms are made of high strength steel from Sweden.
    The cutting chains are made of wear-resistant steel from Sweden
    The bearings and oil seals are the Japanese brands.
  • Hole mining chain saw
    favorites
    Add To Compare

    Type: Quarry MachinesStone Chain Saw MachinesTunnel Chain Saw Machines

    Warranty: 12 Months

    Usage: Granite, Marble

    Machinery Function Features:

    Cavern-type chain saw is special for marble hole mining, crawler walking conveniently and flexibly, its orbit can rotate 270 degrees, which has 4 kinds of working model---horizontal cutting(cutting the top of ceiling and ground),vertical cutting(cutting left side of the facade and the right side of the facade),suitable for the quarries with high steep slope and can't excavate mountain skin layer and do overburden stripping.
  • Quarry Chainsaw Machine Qst3000d on Cat432d Backhoe
    favorites
    Add To Compare

    Type: Quarry MachinesStone Chain Saw MachinesBackhoe Squaring Chain Saw

    Warranty: 12 Months

    Usage: Marble, Limestone, Sandstone

    Machinery Function Features:

    QST3000D chain saw machine on backhoe CAT432 is the last frontier for squaring blocks of marble and stones. QST3000D technology is driven by the very powerful motor of CAT432 and the hydraulic circuit for moving the chain saw was studied together with Caterpillar technicians and our technical staff.The advantages of this technology are a lot o : i.e. you can work day and night and in every weather conditions because the operator inside the cabin can decide the temperatures; you can work without using water ,etc...
    QST3000D works with CAT432 for positioning the blade using the control tools inside the cabin and you can modify the inclination using the stabilizers of backhoe; it's also possible to drive the chain saw trough a remote control outside the cabin.
    All movements for positioning the blade are on double chromate columns allows to have stability and stiffness; this system is unique and only Dazzini QST3000D use it; all movements are driven by single or double hydraulic cylinders (high reliability, simple and no maintenance costs).
    At the end of the cuts, with CAT432 is possible to remove the cuts' dust with only one operator with high safety and speed. CAT432 is 4x4 engine and it can move very easily between quarry's benches for reaching the blocks and starting to square, avoiding to use any other machines.
    QST3000D can use different chain, widiaholders and tools for giving the best cutting solutions for every kind of stones.
    Technical specification:
    • Base : CAT432D
    • Useful cut : 3.40 mt
    • Thickness : 38 mm
    • Chain speed : 0-1.5 mt/sec adjustable
    • Maximun high : 2.20 mt
    • Total lateral movements : 1.75 mt
    • Maximun cutting speed : 1 mt/min
    • Cutting tool : PCD or widia
    • Lubrifications by automatic pump with biodegradable grease
    • NO use of Electric supply
  • Rails type chain saw
    favorites
    Add To Compare

    Type: Quarry MachinesStone Chain Saw MachinesBank Chain Saw Machines

    Warranty: 12 Months

    Usage: Granite, Marble, Quartzite

    Machinery Function Features:

    Orbital-type chain saw is the most basic type,the rails used interchangeably in working, suitable for open-pit mine,each machine can be designed to have two working mode--- vertical and horizontal cutting; Orbital-type chain saw can be designed into the single rail longitudinal mobile model.
  • Chain Saw Machine Mod. ST 300 VH
    favorites
    Add To Compare

    Type: Quarry MachinesStone Chain Saw MachinesBank Chain Saw Machines

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Onyx, Sandstone

  • Terna Fantini Squaring Chain Saw Machine-Block Sawing Machin
    favorites
    Add To Compare

    Type: Quarry MachinesStone Chain Saw MachinesSquaring Chain Saw Machines

    Warranty: 12 Months

    Usage: Marble, Limestone, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    Terna FANTINI

    Block Sawing Machine

    The Terni Fantini is a machine made from a rubber tired JCB vehicle and a group of Fantini cutters. The extreme versatility of its’ rubberised four-wheel drive allows you to reach cutting areas quickly, whether they are: blocks spread over the quarry, banks on the ground or even cuts executed directly at the front of the bank.

    As the machine travels to the block and not the other way round, the Fantini back allows you to save time and money. The operator works from a cabin, protected from atmospheric agents, without needing auxiliary staff, and the cuts are executed dry. The cutting capacity standard is 3.4 metres (length) and 3.0 metres (height).

    Techncial Specifications

    Installed power: 68.6 Kw

    Tractor weight: about 7,000 Kg

    Cutting unit weight: 2,000 Kg

    Arm rotation: 90°

    Useful for cuts of up to 3.9 metres

    Chain speed: 0-0.7 m/sec

    Thickness of cut: 27 mm – 38 mm

    Tractor transit speed: 40 km/h

    Technical characteristics may be subject to variations
  • Diamond Belt Sawing Machines for Quarry
    favorites
    Add To Compare

    Type: Quarry MachinesStone Chain Saw MachinesBeam Chain Saw Machines

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Sandstone, Travertine

    Machinery Function Features:

    Electric diamond belt sawing machine, designed to make tunnel cuts, vertical and horizontal. The JET BELT 940 is composed of two columns with two telescopic extensions for the machine fixing, connected with an horizontal beam of 462 cm that bears the electric cutting unit. This is composed of the main motor and the cutting arm with the diamond belt installed. The column bases are motorized for an easy positioning of the whole structure. The cutting tool consists of a special plastic belt with sintered diamond segments. Only water is used during the cutting phase, both for lubrication and cooling, so that no dust is produced during the cutting phase. Another advantage of diamond belt cutting system respect to the traditional one, is that no grease or oil are used, so that the cut is very clean and free from pollution load.
  • 70BU-C Squaring Chain Saw Machine-Block Sawing Machine
    favorites
    Add To Compare

    Type: Quarry MachinesStone Chain Saw MachinesSquaring Chain Saw Machines

    Warranty: 12 Months

    Usage: Marble, Limestone, Onyx, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    70BU-C Block Sawing Machine

    Chain Saw Model 70BU-C is a self-propelled crawler for vertical cutting, and can be fitted with arms that can cut up to 4.0 metres deep.

    The machine is fitted with a unique self-propelled track with hydraulic stabiliser feet. It can autonomously move into different areas of a quarry to make cuts into floors or square off blocks, without the need for water.

    The machine is fitted with a diesel engine which allows completely autonomous operation, eliminating the need for any electrical wiring connections to generators or power grids.

    This model is particularly useful in working environments that are not connected to the power grid.

    70BU-C

    Installed power: 80 Kw

    Weight: 15,500 Kg

    Arm rotation: 360°

    Speed: 1 Km/h on tracks

    Technical Specifications

    Chain speed: 0-0.7 m/sec

    Thickness of cut: 27 mm – 38 mm

    Useful cutting depth: 4.10 metres max.

    Cutting speed: 0-25 cm/min

    Translation speed on tracks: 1 km/h

    Technical characteristics may be subject to variations
  • Chain Saw Machine Mod. ST550 2VH
    favorites
    Add To Compare

    Type: Quarry MachinesStone Chain Saw MachinesBank Chain Saw Machines

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Onyx, Sandstone

  • 70RABU Bank Chain Saw Machine
    favorites
    Add To Compare

    Type: Quarry MachinesStone Chain Saw MachinesBank Chain Saw Machines

    Warranty: 12 Months

    Usage: Marble, Limestone, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    The 70RABU chain saw machine features a cutting capacity of up to 5.1 m and is even suitable for use with marble and other very hard stones. The machine is operated by a hydraulic system with variable capacity main pump driven by an electric motor, and can execute horizontal and vertical cuts without the need for water cooling.

    The main feature of this machine is the single rail that allows it to be repositioned longitudinally rapidly and without the need for lifting equipment.

    Technical Specifications

    Installed power: 50 Kw

    Weight: 6,200-6,700 Kg

    Arm rotation: 360°

    Chain speed: 0-0.7 m/sec

    Cutting width: 38 mm

    Effective cutting depth: 5.10 m max

    Cutting speed: 0-13 cm/min

    The technical specifications may be subject to change
  • 70SUPER-H Bank Chain Saw Machine
    favorites
    Add To Compare

    Type: Quarry MachinesStone Chain Saw MachinesBank Chain Saw Machines

    Warranty: 12 Months

    Usage: Marble, Limestone, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    The 70 SUPER /H chain saw machine is the most powerful model in the FANTINI range.

    It features a vertical cutting capacity of up to 8.0 m and provides excellent results with both marble and other types of hard stone. The machine is operated by a hydraulic system with variable capacity main pump driven by an electric motor.

    The electro-hydraulically operated controls guarantee power and speed in all operating conditions and the machine can execute horizontal and vertical cuts without the need for water cooling.

    Technical Specifications

    Installed power: 61 Kw

    Weight: 9,600Kg

    Arm rotation: 360°

    Chain speed: 0-0.7 m/sec

    Cutting width: 38 mm

    Effective cutting depth: 8 m max

    Cutting speed: 0-15 cm/min

    The technical specifications may be subject to change
  • Chain Saw Machine Mod. ST450 2VH
    favorites
    Add To Compare

    Type: Quarry MachinesStone Chain Saw MachinesBank Chain Saw Machines

    Warranty: 12 Months

    Usage: Marble, Limestone, Quartzite, Sandstone

    Machinery Function Features:

    TECHNICAL SPECIFICATIONS
    Model ST 450.2 VH
    Power of main electric motor 45 Kw / 61 Hp
    Hydraulik tank capacity 160 Lt.
    Cutting width 42 mm
    Useful cutting depth 4,20 mt (max)
    Rotation of cutting jib 360°
    Weight 5.100 kg.
    This model is designed for open top quarries.
  • Chainsaw Machine Hzk3400 - Quarry Chain Saw Machine
    favorites
    Add To Compare

    Type: Quarry MachinesStone Chain Saw MachinesBank Chain Saw Machines

    Warranty: 12 Months

    Usage: Marble, Limestone, Quartzite, Sandstone

    Machinery Function Features:

    Electrical Motor Total Power: 48 KW
    Chain Rotation Speed: 0-900 mm/s
    Useful Cutting Depth: 3400mm (@70°)
    Cutting Speed: 0,5-4 (m/hr)
    Arm Rotation: 360°
    Oil Tank Capacity: 180lt
    Grease Tank: 25lt
    Width of Cut: 38mm
    Total Weight: 5950 kg
    Rail Weight: 750kg
    Width: 1770mm
  • 50.81 Bank Chain Saw Machine
    favorites
    Add To Compare

    Type: Quarry MachinesStone Chain Saw MachinesBank Chain Saw Machines

    Warranty: 12 Months

    Usage: Marble, Limestone, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    The Fantini 50.81 chain saw machine is designed for use in medium hardness stone quarries and can execute cuts to a depth of up to di 3.4 m. In the case of hard type marble and stone, the cutting depth is reduced to 2.8 m.

    The machine can perform horizontal and vertical cuts without the need for cooling water and is available in either the modular rail (RA/P), or single rail (BU), version; in the latter configuration, the machine can be repositioned by moving it along a single rail, without the need for lifting equipment.

    Technical Specifications

    Installed power: 50 Kw

    Weight: 5,200-5,700 Kg

    Arm rotation: 180°

    Chain speed: 0-0.7 m/sec

    Cutting width: 38 mm

    Effective cutting depth: 3.40 m max

    Cutting speed: 0-13 cm/min

    The technical specifications may be subject to change
  • CHAINTRONIC CH60 Quarry Chain saw
    favorites
    Add To Compare

    Type: Quarry MachinesStone Chain Saw MachinesBank Chain Saw Machines

    Warranty: 12 Months

    Usage: Marble, Limestone, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    Chain saw on which all drives are electric and controlled by Inverters. The higher energy efficiency with respect to hydraulic systems and the specific tool arrangement offer significantly better cutting speeds and tool life.

    A modern heavy-duty chain saw for sedimentary stone quarries,where the machine can perform cuts both vertical and horizontal.

    The machine is driven entirely by electric motors to reduce energy demand (due to the higher efficiency with respect to hydrostatic transmissions) also eliminating maintenance problems typical of hydraulic circuits.

    The machine consists of the following main parts:

    Frame

    The welded steel frame is extremely rigid in both torsion and bending to ensure the absence of deformation guaranteeing limited mechanical loads on the cutting arm and long tool life.

    Main Motor

    The main 30 kW motor operating at variable speed under the control of an Inverter, driving the chain itself, through an epicycloid gearbox.

    The blade rotation system, also with a variable speed motor (Inverter controlled) and an irreversible double worm and crown gearbox for blade rotation;

    The motorised blade-swing system, with a 0,75 kW Motor that positions

    the blade horizontally or vertically.

    Variable speed 3 kW motor with a speed reducer and rack and pinion system, to drive the machine along the track.

    A pump set for blade pinion and chain lubrication, with 0,25 Kw motor

    Electric panel

    The electric panel and switchboard with controls and commands with emergency machine stop in case of anomalies.

    - a set of inverters for the main motors - a cutting speed control system

    - all manual and automatic controls - current absorption on all motors control system - safety and emergency protection devices

    Blade

    Available in lengths suitable for cutting depths from 2 to 5.6 m, the blade is in special high strength and wear-resistant steel. The blade incorporates channels for both lubricant pipework and for cooling water or air.

    The blade edges are machined and drilled to house the wear-plates on which the chain runs during cutting; these replaceable plates are in hardened and tempered steel.

    Chain

    The special steel chain consists of 8 tool-carrier links. The first 5 links carry one tool, while the others each have two in stepped positions.

    This patented arrangement offers high cutting speeds and the best possible resistance to tool wear and breakage. The tools are normally in Tungsten Carbide size 12,7 x 12,7 x 6,5mm and are fastened by a screw so that each tool can be used up to eight times

    Track (Rail)

    Three tracks are provided (more on request) each of 3m length, and complete with anchoring systems to fasten the machine to the quarry floor.

    The three-track system allows continuous machine operation; when track 2 is reached, track 1 can be placed ahead of track 3, with no need to stop the machine.

    Walking beam type track

    A "walking beam" version is also available with a single track of length 7.5m, allowing 5m travel. Using hydraulic cylinders, the machine can be lifted with the track, the latter then being shifted ahead to continue cutting, with no need for other lifting gear.

    A large increase in quarry output can be achieved by combining the use of a chain saw and diamond wire saws.
  • HSTK 450.2 VH Korfmann Cut Machinery - Chain Saw Quarry Machines
    favorites
    Add To Compare

    Type: Quarry MachinesStone Chain Saw MachinesBank Chain Saw Machines

    Warranty: 12 Months

    Usage: Marble, Limestone, Quartzite, Sandstone

    Machinery Function Features:

    CHAIN SAW MACHINE mod. HSTK450 2VH
    CARATTERISTICHE TECNICHE
    TECHNICAL SPECIFICATION
    Model HSTK 450.2 VH
    Power of main electric motor 45 Kw / 61 Hp
    Hydraulik tank capacity 160 Lt.
    Operation speed 0 - 44 cm/min
    Cutting width 42 mm
    Useful cutting depth 2,75 mt (max)
    Rotation of cutting jib 360°
    Weight of the machine 6.900 kg
    Weight of the hydraulic device 1.450 kg
    This model is designed for underground quarries, the max cutting height is 4.500 mm.
  • 50.90 Quarry Bank Chain Saw Machine
    favorites
    Add To Compare

    Type: Quarry MachinesStone Chain Saw MachinesBank Chain Saw Machines

    Warranty: 12 Months

    Usage: Marble, Limestone, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    The Fantini 50.90 chain saw machine is designed for cutting medium soft stone, and cutting and squaring in quarries with sloped banks. It can be supplied with an arm with an effective cutting depth of up to 2.0 m.

    The machine can perform horizontal and vertical cuts without the need for cooling water and is available in either the modular rail (P), or single rail (BU), version; in the latter configuration, the machine can be repositioned by moving it along a single rail, without the need for lifting equipment.

    Technical Specifications

    Installed power: 26.7 Kw

    Weight: 3,500-3,900 Kg

    Arm rotation: 360°

    Chain speed: 0-0.7 m/sec

    Cutting width: 38 mm

    Effective cutting depth: 2.00 m max

    Cutting speed: 0-25 cm/min

    The technical specifications may be subject to change
  • Quarry Tunnel Chain Saw Machine Mod. HSTK450 2VH
    favorites
    Add To Compare

    Type: Quarry MachinesStone Chain Saw MachinesTunnel Chain Saw Machines

    Warranty: 12 Months

    Usage: Marble, Limestone, Quartzite, Sandstone

    Machinery Function Features:

    CARATTERISTICHE TECNICHE
    TECHNICAL SPECIFICATION
    Model HSTK 450.2 VH
    Power of main electric motor 45 Kw / 61 Hp
    Hydraulik tank capacity 160 Lt.
    Operation speed 0 - 44 cm/min
    Cutting width 42 mm
    Useful cutting depth 2,75 mt (max)
    Rotation of cutting jib 360°
    Weight of the machine 6.900 kg
    Weight of the hydraulic device 1.450 kg
    This model is designed for underground quarries, the max cutting height is 4.500 mm.
  • Quarry Chainsaw Machine HZK 8200
    favorites
    Add To Compare

    Type: Quarry MachinesStone Chain Saw MachinesBank Chain Saw Machines

    Warranty: 12 Months

    Usage: Marble, Limestone, Sandstone, Travertine

    Machinery Function Features:

    Electrical Motor Total Power:66KW
    Chain Rotation Speed: 0-900 mm/s
    Useful Cutting Depth:7000 mm (@70°)
    Cutting Speed: 0,5-4 (m/hr) (changes according to stone )
    Arm Rotation: 360°
    Oil Tank Capacity: 320lt
    Grease Tank: 25lt + 180lt big oil tank
    Width of Cut: 38mm
    Total Weight:11000 kg
    Rail Weight: 1700 kg
    Width: 2300mm
    Length:10500mm
    Height:2220mm
  • GU50-SC Sawmill Machine for Tunnels
    favorites
    Add To Compare

    Type: Quarry MachinesStone Chain Saw MachinesTunnel Chain Saw Machines

    Warranty: 12 Months

    Usage: Marble, Limestone, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    Chain Saw Model GU50-SC is a compact version for tunnel extraction work. By setting the cutting depth in automatic mode the machine makes vertical and horizontal cuts against the tunnel face.

    It is self-propelled on a track and radio-controlled, and hence completely autonomous in its movements. Only one operator is sufficient to operate the machine. This model can run cuts up to 1.7 metres in depth.

    Technical Specifications

    Total installed power: 45 KW

    Overall weight: 14,000 Kg

    Hydraulic tank capacity: 300 litres

    Chain rotation speed from 0.1 to 1.7 m/sec.

    Blade progress speed under normal operating conditions: 20 cm/min.

    Cutting depth: 1.7 metres

    Feed speed on tracks: 1 km/h max.

    Operating noise level: 75 decibels

    Minimum tunnel height: 3,100 mm

    Maximum tunnel height: 3,500 mm

    Technical characteristics may be subject to variations
  • Chain Saw Model GU50-R-SC/T Sawmill Machine for Tunnels
    favorites
    Add To Compare

    Type: Quarry MachinesStone Chain Saw MachinesTunnel Chain Saw Machines

    Warranty: 12 Months

    Usage: Marble, Limestone, Sandstone, Travertine

    Machinery Function Features:

    Chain Saw Model GU50-SC is a compact version for tunnel extraction work. By setting the cutting depth in automatic mode the machine makes vertical and horizontal cuts against the tunnel face.

    This is self-propelled on caterpillar tracks and completely autonomous in movement. Only one operator is sufficient to operate the machine. This model can run cuts up to 1.7 metres deep.

    Technical Specifications

    Total installed power 56 KW

    Electrical power supply 400V/50 Hz

    Machine weight Kg. 16,000

    Hydraulic oil tank capacity 300 litres

    Chain rotation speed from 0.1 to 1.7 m/sec.

    Blade feed rate: up to 20 cm/min.

    Useful cutting depth: up to 2.0 metres

    Operating noise level: 85 decibels

    Movement speed on tracks: 1 Km/h max.

    Technical characteristics may be subject to variations
  • Diamond Belt Quarry Chain Saw machine
    favorites
    Add To Compare

    Type: Quarry MachinesStone Chain Saw MachinesBank Chain Saw Machines

    Warranty: 12 Months

    Usage: Marble, Limestone, Sandstone

    Machinery Function Features:

    The Diamond Belt Quarry Saw is the most efficient way of quarrying blocks of limestone, sandstone,
    or marble. You can easily turn ledges over and break blocks loose using airbags after the cuts have
    been completed. The Diamond Belt Quarry Saw travels on track sections that can purchased in
    5 or 10 foot lengths. Leveling jacks are installed on the track to level the uneven quarry floor and to
    keep the saw level while cutting. The rotating saw housing allows owners to make cuts on either side
    of the track to reduce set-up time
  • Quarry Chain Saw Machine Nf-7.1
    favorites
    Add To Compare

    Type: Quarry MachinesStone Chain Saw MachinesBank Chain Saw Machines

    Warranty: 12 Months

    Usage: Marble, Limestone, Sandstone, Travertine

    Machinery Function Features:

    The chain saw machine model ”NF-7.1” is designated for the extraction of marble and stone blocks in the open sky quarries using the most recent technologies. The chain saw “NF-7.1” permits to improve the performances and to reduce to minimum the cost of the cut.
    The chain saw “NF-7.1” is universal: it can execute vertical and horizontal cuts on materials with compression strength higher than 150 Mpa. The movement of the machine is made through a sprocket and rack element assembled on the rails.
    The chain
    The principal tool of work of the chain saw “NF-7.1” is a modular chain composed of insert-holders having, by means of mechanical fixing with a screw, inserts in tungsten carbide. The chain saw “NF-7.1” can work in manual and automatic thanks to the presence of a control device during the cutting phase.
    Operating condition
    Thanks further to the experience and to the tests carried out during the last 5 years, the chain saw “NF-7.1” can work in the following climatic conditions:
    From -40°C to +40°C (the oil tank is provided with heater for the hydraulic oil in places where the temperature goes below 0°C)
    Humidity relative to 98% at 25°C
  • Model SV-C 50 Sawmill Chain Saw Machine for Tunnels
    favorites
    Add To Compare

    Type: Quarry MachinesStone Chain Saw MachinesTunnel Chain Saw Machines

    Warranty: 12 Months

    Usage: Marble, Limestone, Sandstone, Travertine

    Machinery Function Features:

    Chain Saw Model SV50 is a special version of the family of self-propelled machines for tunnel excavations. This machine is designed to perform rear cutting of the blocks whilst the tunnelling advances forwards. The depth of the rear cut can reach up to 1.7 metres.

    Technical Specifications

    Total installed power: 30 kW

    Hydrostatic transmission with variable flow pump

    Weight: 8,000 Kg

    Useful for cuts of up to 1.60 metres (on both the right and left hand sides)

    Hydraulic tank capacity: 150 litres

    Chain speed: 0.1 ÷0.7 m/sec

    Operating noise level: 85 decibels

    Feed speed on tracks: 1.5 km/h max.

    Technical characteristics may be subject to variations
  • SQB/P/E Beam Chain Saw Machine
    favorites
    Add To Compare

    Type: Quarry MachinesStone Chain Saw MachinesBeam Chain Saw Machines

    Warranty: 12 Months

    Usage: Marble, Limestone, Onyx, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    The chain mode sectioning sawing machine SQB/P is a hydraulic machine consisting of a portal that runs on tracks, and a horizontal arm that can make vertical cuts for squaring off and blocking hard and/or abrasive stones. The cuts can be programmed by means of a computerised system loaded with positioning and cutting parameters.

    Once the cutting sequence has been programmed, the machine can operate in an automatic cycle, even during night-time hours, without the need for interventions by an operator.

    Fantini cutting machines can be customised with high automation systems, according to customer requirements.

    Technical Specifications

    Power installed: 50 kW

    Max. cutting width (L): 3,500/4,000 mm

    Max. cutting height (H): 2,500 mm

    Variable chain speed: 0-2 metres/ sec

    Variable arm descent: 0-15 cm/min

    Width of cut: 27 mm – 38 mm

    Machine travelling speed on tracks: 3-30 metres/min

    Weight: 14,000 Kg

    Technical characteristics may be subject to variations
  • Chain Saw Accessories - Tracks
    favorites
    Add To Compare

    Type: Quarry MachinesStone Chain Saw MachinesBank Chain Saw Machines

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Onyx, Sandstone

    Machinery Function Features:

    It is possible to equip the Fantini chain saw machine at one single rail with tracks on the end of the rail.
    They allow the chain saw to make orthogonal translation movements and to rotate on itself besides to make longitudinal translation. So the machine can freely move and positioning in the cutting area.

    Supported model:
    -70 version BU
    -50.90 version BU
    -50.81 version BU
    -20.90 version BU
  • Quarry Chain Saw Machine
    favorites
    Add To Compare

    Type: Quarry MachinesStone Chain Saw MachinesSquaring Chain Saw Machines

    $69500-99700

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    GD-CS3200 marble chain saw is the special marble quarrying equipment, which consists of a host, moving platform, rails, chain arm, chain, hydraulic system, electric control system, chain lubrication pump and other parts. Chain arm, cutting chain and the machine move on the rails, the machine can rapidly adjust oil cylinder action by the hydraulic pressure drive. The chain arm may rotate in 360 degree for vertical and horizontal cutting which can translate freely according to the mining requirement. The cutting chain is transmitted by motor through a gearbox, making stepless speed regulation within 0-1.2m/s by frequency control chain speed. The hydraulic motor drives the platform moving back and forth and the 360 degree rotation of chain arm, both having two speeds (fast and slow); The cutting speed can be adjusted according to the hardness of stone; The hydraulic system is equipped with automatic heating and air cooling device, which can ensure the equipment can work normally when the environment temperature difference is substantial; This equipment is suitable for quarrying the secondary level marble blocks.
  • Rail Type Chain Saw Machine For Marble Quarries
    favorites
    Add To Compare

    Type: Quarry MachinesStone Chain Saw MachinesBank Chain Saw Machines

    $88000-95000

    Warranty: 12 Months

    Usage: Marble, Limestone

    Machinery Function Features:

    Dry cuts, no water supply required.
    The products are self-developed, reasonable layout and structure, convenient operation.
    The gear boxes are planetary gear boxes, large bearing capacity, supplied by Italian producer.
    The rails and trolleys are made of alloy steel, big bearing capacity and deformation resistant.
    The hydraulic components are also from Italy.
    The main oil pumps and hydraulic motors are made in Germany.
    The electrical components are mainly from Schneider Electric.
    The chain arms are made of high strength steel from Sweden.
    The cutting chains are made of wear-resistant steel from Sweden
    The bearings and oil seals are the Japanese brands.
  • CSM Chain Saw Machine For Dry Cutting Marble And Soft Stone
    favorites
    Add To Compare

    Type: Quarry MachinesStone Chain Saw MachinesBank Chain Saw Machines

    $105000-118000

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Onyx, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    Our CSM series chain saw machines are suitable for dry cutting marble and soft stone. They can be used for multiple purposes and can cut the stone horizontally and vertically.
    Features:
    High rigidity, ensuring long-term stability and efficient operation;
    Friendly man-machine interface, easy to operate and maintain;
    PLC integrated control, realizing no dead angle cutting;
    The unique hydraulic control system can automatically adjust the cutting parameters according to the hardness of the stone to achieve high-efficiency cutting;
    Optional Internet of Things function to realize remote data collection and online monitoring of machine operating conditions, after-sale service and trouble-shooting;
    Optional wireless remote control operation mode.
  • Quarry Chain Saw Machine Mod. ST 300 VH
    favorites
    Add To Compare

    Type: Quarry MachinesStone Chain Saw MachinesBank Chain Saw Machines

    Warranty: 12 Months

    Usage: Limestone, Sandstone, Travertine

    Machinery Function Features:

    CARATTERISTICHE TECNICHE
    TECHNICAL SPECIFICATION
    Model ST 300 VH
    Power of main electric motor 33 Kw / 46 Hp
    Hydraulic tank capacity 180 Lt.
    Cutting width 42 mm
    Useful cutting depth 2,50 mt (max)
    Rotation of cutting jib 360°
    Weight 3.100 kg
    This model is designed for open top quarries with soft stone.

Have a Question? Ask our expert

Questions & Answers on Stone Chain Saw Machines

What are quarry chain saw machines max useful cut depth?

Posted by Visitor

reply icon Reply to this question 1Reply

It is around 2500 to 3000 mm depending on the model of the machine and the hardness of the stone.

Answered by StoneContact

Like

Can a quarry chain saw machine cut granite?

Posted by Visitor

reply icon Reply to this question 1Reply

Quarry chain saw machines are designed for use in medium hardness stone quarries but with the suitable cutting segments they also can be used in granite quarries.

Answered by StoneContact

Like

What is quarry chain saw machines average cutting speed?

Posted by Visitor

reply icon Reply to this question 1Reply

The slope of the ground and the hardness of the stone affect the cutting speed of the machine, but they can cut 0~4 meters per hour on average.

Answered by StoneContact

Like

Clear All
Compare (0/4)
StoneContact
Tips

Tell Suppliers what you want to buy