Marble Edge Profiling, Polishing Machine in Spain

CANTER vertical edge polishing machine Maximum precision and quality The CANTER straight edge polishing machine is a new experience. A machine designed and built for manufactures of maximum precision and quality.
Straight edge polishing machine has been designed for doing the polishing and shining the edges of marble, granite and synthetic materials.
This new model is the first in world to be made in cast iron, the cast iron structure guarantee perfect stability that’s impossible for steel frame.
This model has 8 frontal spindles, 2 top bevelling spindles, 2 bottom bevelling spindles and group disk / water drip. With this equipment you do a big production with perfect finish.
All the spindles are independent, each spindle has his own pressure regulator, each spindle can be enabled or not to work.
Another new in CANTER, the motorized oscillation move the spindles group, 8 vertical spindles, transversally to the edge, this improve the quality of the polishing and the performance of the machine.
The adjustable spindle allow, the machine to perform various job on the stone like gauging, calibration, edge gauging, upper groove, lower groove, sloping cuts, and is able to mill shaped profiles with the apposite shaped tools.
The pressors are double shaft cylinders with 150mm of stroke. The rollers are covered with a soft anti-wear plastic material, all the rollers are completely made in plastic materials, they spin on long life lubrication bearing made in synthetic material with glass balls.

Machine dimensions 3500/2400 mm
Monoboloc Machine (no need for installation work)
Total installed power 17 H. P.
Machining time 1.30 seconds
Production 40 stones / hour
Adjustable speed drive and motor side movement marble and granite work
Lateral regulation by hydraulic motors
Holding the stones pneumatica
Electronic Parts counter
Electronic indicator disc wear
The machine allows any type of curve, thanks to its template

Thought out to the minutest detail, it can polish straight edges measuring 1 to 6 cm in granite, marble and synthetic materials. Obtain high performance with compact size. It requires no large facilities, and its monoblock structure is equipped with a water channelling and drainage system, to keep the workstation clean.
Sturdy structure in machined hot-galvanised structural steel
Maximum precision with excellent corrosion resistance
Stainless steel guarding and screws
A guarantee in the face of the demanding conditions of use to which this type of machine is exposed
Heads protected by stainless steel fenders
Zero leakage
Warning of end of abrasive; the machine stops automatically, avoiding damage to abrasion plates
Electronic regulation of belt movement
Can deal with different types from material
Computerised control of heads with interactive reading of the position of the material. The machine reads the piece on entry and communicates the dimensions to all the heads. This system allows the total polishing of out-of-square pieces and avoids breakages.
Guarding conforms to EC standards
Two pistons per head Drip cutting unit Disk may be installed. Rotation 0-90o, cuts at 0o, 45o and 90o. Motor power: 5.5 hp Polishing heads Each with 2 hp of power. Can be used with abrasive or diamond without shortening the useful life of the motors. The heads are driven pneumatically. Two pistons per head for maximum precision. The first head has a mechanic stop block allowing the use of metal diamond crown bits. Bevellers Each with 2 hp of power. Driven pneumatically by double pistons. The machine can be configured with 2 or 3 bevellers. Technical Characteristics: Polishing heads 6 - 7 Upper beveller 1 - 2 Lower beveller 1 Drip cutting unit / disc 1 Total power requirement 20 - 23 Kw. Dimensions 3500x1400x2200mm.
Does not include material entry and exit tables. Standard tables measure 1,000 mm. Weight 1800 – 2300 Kg.

Double Head MILLENNIUM Edge Polisher performs a wide variety of edges at high speed, with low tool cost and minimal maintenance.
Modern touch screen and EasyEdge software make the use of the Double Head MILLENNIUM easy and intuitive.
The Double Head MILLENNIUM has a calibrating motor for automatic tool pressure adjustment and a polishing motor with automatic tool wear control. The machine's work table is equipped with a roller system that allows the material to rotate 360°, a pneumatic system for reliable material fixing, and an intelligent safety system.