CANTER Vertical Edge Polishing Machine

Thought out to the minutest detail, it can polish straight edges measuring 1 to 6 cm in granite, marble and synthetic materials. Obtain high performance with compact size. It requires no large facilities, and its monoblock structure is equipped with a water channelling and drainage system, to keep the workstation clean.
Sturdy structure in machined hot-galvanised structural steel
Maximum precision with excellent corrosion resistance
Stainless steel guarding and screws
A guarantee in the face of the demanding conditions of use to which this type of machine is exposed
Heads protected by stainless steel fenders
Zero leakage
Warning of end of abrasive; the machine stops automatically, avoiding damage to abrasion plates
Electronic regulation of belt movement
Can deal with different types from material
Computerised control of heads with interactive reading of the position of the material. The machine reads the piece on entry and communicates the dimensions to all the heads. This system allows the total polishing of out-of-square pieces and avoids breakages.
Guarding conforms to EC standards
Two pistons per head Drip cutting unit Disk may be installed. Rotation 0-90o, cuts at 0o, 45o and 90o. Motor power: 5.5 hp Polishing heads Each with 2 hp of power. Can be used with abrasive or diamond without shortening the useful life of the motors. The heads are driven pneumatically. Two pistons per head for maximum precision. The first head has a mechanic stop block allowing the use of metal diamond crown bits. Bevellers Each with 2 hp of power. Driven pneumatically by double pistons. The machine can be configured with 2 or 3 bevellers. Technical Characteristics: Polishing heads 6 - 7 Upper beveller 1 - 2 Lower beveller 1 Drip cutting unit / disc 1 Total power requirement 20 - 23 Kw. Dimensions 3500x1400x2200mm.
Does not include material entry and exit tables. Standard tables measure 1,000 mm. Weight 1800 – 2300 Kg.