Artificial Stone Drilling, Slot Machine in Spain

Drilling machine conceived to drill material pieces sides.
It enjoys an innovative design. It is an extremely practical and easy to use model as well as effective and low-cost.
The two headstocks, which self-support the bits and the stops, make the different pieces and structure size regulation faster. The structure is assembled onto four wheels so that it is easer to move.
It can drill a great variety of shapes and it can even spontaneously replace the bit for a small disk. This way can also drill horizontal slots.
Sensational machine in the drilling machines market.

Slot/Kerf and drilling machine for cladding products KERF-2
Ref. 8503
The KERF-2 machine grooves and perforates coating products. It can have different finishes such as:
Kerf I continue
Kerf Reduced
Slot
Vertical drill
Horizontal drill
Incision

Machine that allows to obtain holes and cuts with great flexibility. Ref. 8502
Machine for cladding KERF-1000
Ref. 8502 Technical characteristics:
The main feature of the KERF-1000 coating machine is the extreme flexibility in processing that allows to obtain holes and cuts, depending on the configuration required by the customer.
The different types of finish for each anchor can be obtained with a single machine:
Kerf, Slot cutting and drilling

New Groover CNC of 12 axes for ventilated facades
HERSEN designs and manufactures special machinery, made to measure, for Large Format Porcelain, Porcelain Stoneware, Sintered Stone, Solid Surfaces, marbles and granites.
This automatic slotting machine makes incisions on the back of the pieces for the placement of the fixing system. In this case, for the STRONGFIX anchoring system. It is a 45 degree double groove in the shape of a dovetail. The aluminum profiles are inserted into these grooves and fixed to the piece with putty.
HERSEN has designed a router that performs a clean and precise cut, obtaining precise and defined incisions. It can slot parts from 100mm to 1600mm wide, which allows ENTIRE BOARDS to be slotted.
The material to be grooved enters through a motorized roller bed, and a controlled mobile guide correctly aligns the material before entering the machine and the heads begin to groove.
It is built with 6 motors installed on 3 bridges. Each bridge has an independent cutting head, composed of two motors with two discs, in this way it is possible to make 3 pairs of grooves at 45º at the same time and separated from each other to any size.
It performs the grooving both continuously and discontinuously. This discontinuous grooving makes it possible to groove parts where windows, doors or corner joints go without the grooving cut being seen by the edges. What makes the façade aesthetically improve and does not weaken the pieces by making unnecessary cuts.

It is also possible to build the machine for the transverse grooving of the board.
It has been equipped with an automatic control and measurement system for the wear of the diamond blades and the depth of the grooves to always obtain the desired measurement of the grooves. Another system automatically fans the diamond blades, optimizing the number of meters of cut and always allowing a clean cut in the incisions.
It has been implemented with custom made software to be able to manage the work orders and breakdowns of the architects. In this way, the execution of the pieces can be managed both from the machine and from the technical office. In this way, the pieces that are being made of each project and each facade are controlled at all times, as well as the pieces that still need to be done.