If you need our help, we will be glad to help you until you find your products.
Skype: StoneContact.com
WhatsApp/Wechat: +86-17689946988
Clear All
Compare (0/4)
Home ProductsStone MachineryStone Factory MachinesStone Finishing, Profiling MachinesStone Drilling, Slot MachineArtificial Stone Drilling, Slot Machine
Product Tag:
Show More
-
Add To CompareType: Stone Factory MachinesStone Finishing, Profiling MachinesStone Drilling, Slot Machine
FOB Price:$5500-7000
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Automatic Stone Drilling Machine for Undercut Anchors
Equipment Introduction：This stone drilling machine is used to drill undercut anchor holes in stone panels, concrete panels,ceramic plates,and other cladding panels. Such as granite, marble, travertine, sand stone, crystal glass, quarz, ceramic, etc.
Equipment features：
·Easy to operate
·2 heads can work together or work by single head
·Automatic drill
Equipment configurations：
·Assembled with aqua storage tank and desk universal roller
·Electric control system
·Stone positioning system
·Plates can be adjusted in both X, Y directions
·Automatic drill technique of water cooling diamond
·Clear plate surface with water spraying·Checking tool of pore forming
Technical characteristics：Automatic air supply system, Automatic circulating water system, Drilling positioning system, Drill compensation regulation system.
Precision of drilling position：about 1mm.
Vigor
8YR
China
Xiamen Vigor Technology Co., Ltd.
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Finishing, Profiling MachinesStone Drilling, Slot Machine
FOB Price:$5500-7000
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Back Bolt Tools Undercut Holing Machine for Stone Anchors
Equipment introduction：Applicable for stone drilling, concrete panels,ceramic plates,and other cladding panels. Such as granite, marble, travertine, sand stone, crystal glass, quarz, ceramic, etc.
Equipment features：
·Easy to operate
·Single die
·Automatic drill
Equipment configurations：
·Stainless steel frame, assembled with aqua storage tank and desk universal roller
·Electric control system
·Stone positioning system
·Plates can be adjusted in both X, Y directions
·Automatic drill technique of water cooling diamond
·Clear plate surface with water spraying·Checking tool of pore forming
Technical characteristics：Automatic air supply system, Automatic circulating water system, Drilling positioning system, Drill compensation regulation system.
Precision of drilling position：about 1mm.
Vigor
8YR
China
Xiamen Vigor Technology Co., Ltd.
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Finishing, Profiling MachinesStone Drilling, Slot Machine
FOB Price:$6500-7000
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Automatic Drilling Machine For Undercut Anchor of Ventilated Facades
Equipment Introduction：This drilling machine can drill in different stone panels, concrete panels,ceramic panels,and other cladding panels. Such as granite, marble, travertine, sand stone, crystal glass, quarz, ceramic,etc, for back bolt application.
Equipment features：
·Easy to operate
·Single die
·Automatic drill
Equipment configurations：
·Stainless steel frame, assembled with aqua storage tank and desk universal roller
·Electric control system
·Stone positioning system
·Plates can be adjusted in both X, Y directions
·Automatic drill technique of water cooling diamond
·Clear plate surface with water spraying·Checking tool of pore forming
Technical characteristics：Automatic air supply system, Automatic circulating water system, Drilling positioning system, Drill compensation regulation system.
Equipment parameters：
1.Voltage: 380v.
2.Motor power: 2.2KW .
3.Air pressure: 0.6 Mpa.
4.Water pressure: 0.15 Mpa.
Specification: 1900*1650*1550mm.
Drilling parameters：
1.Max hole depth:40mm.
2.Min spacing: 150mm.
3.Max plate width: 1200mm.
4.Max plate length: 1800mm.
5.Min plate thickness: 12mm.
Precision of drilling position：about 1mm.
Vigor
8YR
China
Xiamen Vigor Technology Co., Ltd.
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Finishing, Profiling MachinesStone Drilling, Slot Machine
FOB Price:$5500-7000
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Anchor Hole Drilling Machine For Panel anchors
Equipment Introduction：This stone drilling machine is used to drill undercut anchor holes in stone panels, concrete panels,ceramic plates,and other cladding panels. Such as granite, marble, travertine, sand stone, crystal glass, quarz, ceramic, etc.
Equipment features：
·Easy to operate
·2 heads can work together or work by single head
·Automatic drill
Equipment configurations：
·Assembled with aqua storage tank and desk universal roller
·Electric control system
·Stone positioning system
·Plates can be adjusted in both X, Y directions
·Automatic drill technique of water cooling diamond
·Clear plate surface with water spraying·Checking tool of pore forming
Technical characteristics：Automatic air supply system, Automatic circulating water system, Drilling positioning system, Drill compensation regulation system.
Precision of drilling position：about 1mm.
Vigor
8YR
China
Xiamen Vigor Technology Co., Ltd.
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Finishing, Profiling MachinesStone Drilling, Slot Machine
FOB Price:$6000-7000
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
The machine is a special drilling equipment for undercut anchor of stone;
The core parts of the machine are made of original imported parts;
pneumatic control double drill unit, pneumatic advance and retreat knife;
high accuracy,simple operation, high effiency.
Pengkun
China
FUJIAN PENGKUN INDUSTRY CO.,LTD
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Finishing, Profiling MachinesStone Drilling, Slot Machine
FOB Price:$5500-7000
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Undercut Holing Machine For Stainless Steel Anchor
Equipment Introduction：This stone drilling machine is used to drill undercut anchor holes in stone panels, concrete panels,ceramic plates,and other cladding panels. Such as granite, marble, travertine, sand stone, crystal glass, quarz, ceramic, etc.
Equipment features：
·Easy to operate
·2 heads can work together or work by single head
·Automatic drill
Equipment configurations：
·Assembled with aqua storage tank and desk universal roller
·Electric control system
·Stone positioning system
·Plates can be adjusted in both X, Y directions
·Automatic drill technique of water cooling diamond
·Clear plate surface with water spraying·Checking tool of pore forming
Technical characteristics：Automatic air supply system, Automatic circulating water system, Drilling positioning system, Drill compensation regulation system.
Precision of drilling position：about 1mm.
Vigor
8YR
China
Xiamen Vigor Technology Co., Ltd.
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Finishing, Profiling MachinesStone Drilling, Slot Machine
FOB Price:$5500-7000
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Stone Drilling Equipment For Fixing Anchor
Equipment Introduction：This is used to drill undercut anchor holes in stone panels, concrete panels,ceramic plates,and other cladding panels. Such as granite, marble, travertine, sand stone, crystal glass, quarz, ceramic, etc.
Equipment features：
·Easy to operate
·2 heads can work together or work by single head
·Automatic drill
Equipment configurations：
·Assembled with aqua storage tank and desk universal roller
·Electric control system
·Stone positioning system
·Plates can be adjusted in both X, Y directions
·Automatic drill technique of water cooling diamond
·Clear plate surface with water spraying·Checking tool of pore forming
Technical characteristics：Automatic air supply system, Automatic circulating water system, Drilling positioning system, Drill compensation regulation system.
Precision of drilling position：about 1mm.
Vigor
8YR
China
Xiamen Vigor Technology Co., Ltd.
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Finishing, Profiling MachinesStone Drilling, Slot Machine
FOB Price:$5500-7000
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Anchor Bolt Drilling Tool For Undercut System
Equipment Introduction：This stone drilling machine is used to drill undercut anchor holes in stone panels, concrete panels,ceramic plates,and other cladding panels. Such as granite, marble, travertine, sand stone, crystal glass, quarz, ceramic, etc.
Equipment features：
·Easy to operate
·2 heads can work together or work by single head
·Automatic drill
Equipment configurations：
·Assembled with aqua storage tank and desk universal roller
·Electric control system
·Stone positioning system
·Plates can be adjusted in both X, Y directions
·Automatic drill technique of water cooling diamond
·Clear plate surface with water spraying·Checking tool of pore forming
Technical characteristics：Automatic air supply system, Automatic circulating water system, Drilling positioning system, Drill compensation regulation system.
Precision of drilling position：about 1mm.
Vigor
8YR
China
Xiamen Vigor Technology Co., Ltd.
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Finishing, Profiling MachinesStone Drilling, Slot Machine
FOB Price:$5500-7000
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Granite Drilling Machine For Post Tension Anchor
Equipment Introduction：This stone drilling machine is used to drill undercut anchor holes in stone panels, concrete panels,ceramic plates,and other cladding panels. Such as granite, marble, travertine, sand stone, crystal glass, quarz, ceramic, etc.
Equipment features：
·Easy to operate
·2 heads can work together or work by single head
·Automatic drill
Equipment configurations：
·Assembled with aqua storage tank and desk universal roller
·Electric control system
·Stone positioning system
·Plates can be adjusted in both X, Y directions
·Automatic drill technique of water cooling diamond
·Clear plate surface with water spraying·Checking tool of pore forming
Technical characteristics：Automatic air supply system, Automatic circulating water system, Drilling positioning system, Drill compensation regulation system.
Precision of drilling position：about 1mm.
Vigor
8YR
China
Xiamen Vigor Technology Co., Ltd.
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Finishing, Profiling MachinesStone Drilling, Slot Machine
FOB Price:$4000-5000
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Drilling hole
XIANDA MACHINERY
8YR
China
FUJIAN XIANDA MACHINERY CO., LTD.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesStone Drilling, Slot Machine
$12000-15000
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
4 Head Horizontal Drilling Machine Anchor Hole Machine Side Drilling
Main application: This stone drilling machine is suitable for PC side drilling holes for stainless steel dowel pin anchors in various kinds of stone panels, such as marble, granite, sandstone, travertine, basalt, limestone, quartzite, artifical stone, high-density cement panels...etc. The main accessories are originally imported, manual control of advance and retreat, high-speed spindle drilling, and automatic control of drilling depth.
Equipment Technical Parameters:
Maximum package size: 3300*2200*2100 (mm)
Maximum vertical size: unlimited
Anchor hole drilling diameter: M5 - M50, can be customized.
Anchor hole drilling depth: 50mm, etc.
Vigor
8YR
China
Xiamen Vigor Technology Co., Ltd.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesStone Drilling, Slot Machine
$3200-4100
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
SZ-300 adopts the round column as its guide slip surface for steady automatic ups and downs. The main drive has two kinds: single speed and double speed. It is mainly used for stone drilling and tombstones tank processing.
SHUINAN MACHINE
4YR
China
XIAMEN SHUINAN MACHINE CO.,LTD.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesStone Drilling, Slot Machine
$5500-7000
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Stone Drilling Equipment for Marble Accessories
Equipment Introduction：Stone drilling machine for facade masonry anchors is used to drill undercut anchor holes in stone panels, concrete panels,ceramic plates,and other cladding panels. Such as granite, marble, travertine, sand stone, crystal glass, quarz, ceramic, etc.
Equipment features：
·Easy to operate
·2 heads can work together or work by single head
·Automatic drill
Equipment configurations：
·Assembled with aqua storage tank and desk universal roller
·Electric control system
·Stone positioning system
·Plates can be adjusted in both X, Y directions
·Automatic drill technique of water cooling diamond
·Clear plate surface with water spraying·Checking tool of pore forming
Technical characteristics：Automatic air supply system, Automatic circulating water system, Drilling positioning system, Drill compensation regulation system.
Precision of drilling position：about 1mm.
Vigor
8YR
China
Xiamen Vigor Technology Co., Ltd.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesStone Drilling, Slot Machine
$3840-4020
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
stone drilling machine
New Haineng
China
Quanzhou Xinhaineng Machinery Co,. Ltd.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesStone Drilling, Slot Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Artificial Stone
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesStone Drilling, Slot Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
SYF300-1-1 Drill machine
Drilling hole diameter mm 15-300
Lifting stroke mm 1400
Main motor power kw 7.5
Exhausted water m3/h 8
Gross weight kg 850
Overall dimensions(L*W*H) mm 1500*900*2700 -
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesStone Drilling, Slot Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Artificial Stone
DGF
Spain
Digafer S.A.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesStone Drilling, Slot Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Artificial Stone
Machinery Function Features:
This machine is suitable for backing bolts in marble, granite, ceramic plates, honeycomb panels, high-density cement boards and all kinds of man-made fiber boards. It is suitable for all the current popular stone curtain wall, glass curtain wall and ceramic curtain wall project.
Product features
★According to the construction requirements, combined with modern mechanical, electrical and pneumatic integrated technology, using PLC programming control technology, using pneumatic instead of manual, with higher efficiency, good safety performance, automatic design of double head working at the same time, automatic completion of drilling and Reaming, accurate and easy to adjust.
★ Single and double-headed mainframes can be switched between work, single hole operation or double hole at the same time.
★The diameter of the drilled hole and the diameter of the bottom hole can be adjusted.
★ Reasonable structure, accurate positioning, more humanized operation and high work efficiency.
★ With dual high-speed motors, the system is stable, safe and energy-saving, and can be operated by two people at the same time.
★ Energy efficient, easy to operate, and safer. Widely used in stone manufacturers and construction units for mass production.
★ Three-phase 380V power supply is suitable for use at any time and anywhere, and it can be connected quickly.
★The machine head can move freely in the direction of the beam.
★Lock the position of the plate by the principle of air pressure and adjust the speed of the head up and down.
★ According to the design requirements of the curtain wall, it is applicable to the rear-cut anchor bolts of various specifications. Cost-effective, it is more efficient to make two holes at the same time. It is suitable for the mass production of sheet metal manufacturers and the construction of large-scale projects of large and medium-sized projects and construction units.
★Using original motor and customized movement rotor to meet the requirements of high speed and low energy consumption. Stable performance and long service life.
★With toolbox, equipped with various wrenches, inlet valve and various back bolt sleeves
★ There are hole detection gauges and manuals.
★There is a special electronic water valve to control the on and off of the water, which not only achieves the ideal water cooling effect of the diamond bit but also saves water accurately.
★Drilling consumables for use: Corrugated diamond drills of various specifications such as M6 and M8 are used.
Eaststar
China
EASTSTAR MACHINERY CO.,LTD
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesStone Drilling, Slot Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Artificial Stone
Machinery Function Features:
Drilling machine conceived to drill material pieces sides.
It enjoys an innovative design. It is an extremely practical and easy to use model as well as effective and low-cost.
The two headstocks, which self-support the bits and the stops, make the different pieces and structure size regulation faster. The structure is assembled onto four wheels so that it is easer to move.
It can drill a great variety of shapes and it can even spontaneously replace the bit for a small disk. This way can also drill horizontal slots.
Sensational machine in the drilling machines market.
CANIGO
Spain
MAQUINARIA CANIGO, S.A.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesStone Drilling, Slot Machine
$5500-6500
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
SZ-300 Stone Drilling Machine, adopts round column as its guide slip surface for steady automatic ups and downs. The main drive has two kinds: single speed and double speed. It is mainly uses for stone drilling and tombstones tank processing.
JULUN
China
FUJIAN NANAN JULUN MACHINERY CO., LTD.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesStone Drilling, Slot Machine
$5000-7000
Warranty: 12 Months
Usage: Granite, Marble, Artificial Stone
Machinery Function Features:
Double head hole expanding machine
I. The working principle and introduction of the double-head hole expanding machine
Other name:Back bolt punching machine, back bolt drilling machine, stone opening machine.
Type:Double head.
Usage:Stone drilling (back bolt hole)
II.Main use:
This machine is suitable for backing bolts in marble, granite, ceramic plates, honeycomb panels, high-density cement boards and all kinds of man-made fiber boards. It is suitable for all the current popular stone curtain wall, glass curtain wall and ceramic curtain wall project.
III.Technical parameter
Voltage 380V no-load speed 12000r/min
Rated power 1.9KW*2(double head) Gas pressure ≥0.8MPa
Cooling type Water-cooled Weight 500KG (double head)
water pressure 3kg/cm2 Max. vertical stroke 100mm
Control mode automatic Bit type Electroplated bit
Horizontal space 200-1400 Vertical space unlimited
Hole diameter 7.2,9.0,11.0,13.0 Hole deep 5--40
Max. processing size 2500*1500*40(double head) Overall dimension H2000*W1200*H1500(double head)
IV.Product features
★According to the construction requirements, combined with modern mechanical, electrical and pneumatic integrated technology, using PLC programming control technology, using pneumatic instead of manual, with higher efficiency, good safety performance, automatic design of double head working at the same time, automatic completion of drilling and Reaming, accurate and easy to adjust.
★ Single and double-headed mainframes can be switched between work, single hole operation or double hole at the same time.
★The diameter of the drilled hole and the diameter of the bottom hole can be adjusted.
★ Reasonable structure, accurate positioning, more humanized operation and high work efficiency.
★ With dual high-speed motors, the system is stable, safe and energy-saving, and can be operated by two people at the same time.
★ Energy efficient, easy to operate, and safer. Widely used in stone manufacturers and construction units for mass production.
★ Three-phase 380V power supply is suitable for use at any time and anywhere, and it can be connected quickly.
★The machine head can move freely in the direction of the beam.
★Lock the position of the plate by the principle of air pressure and adjust the speed of the head up and down.
★ According to the design requirements of the curtain wall, it is applicable to the rear-cut anchor bolts of various specifications. Cost-effective, it is more efficient to make two holes at the same time. It is suitable for the mass production of sheet metal manufacturers and the construction of large-scale projects of large and medium-sized projects and construction units.
★Using original motor and customized movement rotor to meet the requirements of high speed and low energy consumption. Stable performance and long service life.
★With toolbox, equipped with various wrenches, inlet valve and various back bolt sleeves
★ There are hole detection gauges and manuals.
★There is a special electronic water valve to control the on and off of the water, which not only achieves the ideal water cooling effect of the diamond bit but also saves water accurately.
★Drilling consumables for use: Corrugated diamond drills of various specifications such as M6 and M8 are used.
Schematic diagram of drilling effect:
Eaststar
China
EASTSTAR MACHINERY CO.,LTD
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesStone Drilling, Slot Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Slot/Kerf and drilling machine for cladding products KERF-2
Ref. 8503
The KERF-2 machine grooves and perforates coating products. It can have different finishes such as:
Kerf I continue
Kerf Reduced
Slot
Vertical drill
Horizontal drill
Incision
HERSEN S.L
Spain
HERSEN S.L
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesStone Drilling, Slot Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite
Machinery Function Features:
Machine that allows to obtain holes and cuts with great flexibility. Ref. 8502
Machine for cladding KERF-1000
Ref. 8502 Technical characteristics:
The main feature of the KERF-1000 coating machine is the extreme flexibility in processing that allows to obtain holes and cuts, depending on the configuration required by the customer.
The different types of finish for each anchor can be obtained with a single machine:
Kerf, Slot cutting and drilling
HERSEN S.L
Spain
HERSEN S.L
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesStone Drilling, Slot Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
MRK 30 KERF machine makes kerf incisions on the edge of materials in gres porcelain, agglomerated, granite, marble and terrace allowing the insertion of supporting clips for the ventilated façades.
CompactLine
Italy
Ferrari & Cigarini SRL
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesStone Drilling, Slot Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
New Groover CNC of 12 axes for ventilated facades
HERSEN designs and manufactures special machinery, made to measure, for Large Format Porcelain, Porcelain Stoneware, Sintered Stone, Solid Surfaces, marbles and granites.
This automatic slotting machine makes incisions on the back of the pieces for the placement of the fixing system. In this case, for the STRONGFIX anchoring system. It is a 45 degree double groove in the shape of a dovetail. The aluminum profiles are inserted into these grooves and fixed to the piece with putty.
HERSEN has designed a router that performs a clean and precise cut, obtaining precise and defined incisions. It can slot parts from 100mm to 1600mm wide, which allows ENTIRE BOARDS to be slotted.
The material to be grooved enters through a motorized roller bed, and a controlled mobile guide correctly aligns the material before entering the machine and the heads begin to groove.
It is built with 6 motors installed on 3 bridges. Each bridge has an independent cutting head, composed of two motors with two discs, in this way it is possible to make 3 pairs of grooves at 45º at the same time and separated from each other to any size.
It performs the grooving both continuously and discontinuously. This discontinuous grooving makes it possible to groove parts where windows, doors or corner joints go without the grooving cut being seen by the edges. What makes the façade aesthetically improve and does not weaken the pieces by making unnecessary cuts.
It is also possible to build the machine for the transverse grooving of the board.
It has been equipped with an automatic control and measurement system for the wear of the diamond blades and the depth of the grooves to always obtain the desired measurement of the grooves. Another system automatically fans the diamond blades, optimizing the number of meters of cut and always allowing a clean cut in the incisions.
It has been implemented with custom made software to be able to manage the work orders and breakdowns of the architects. In this way, the execution of the pieces can be managed both from the machine and from the technical office. In this way, the pieces that are being made of each project and each facade are controlled at all times, as well as the pieces that still need to be done.
HERSEN S.L
Spain
HERSEN S.L
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesStone Drilling, Slot Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite, Sandstone
Machinery Function Features:
MRK 120 KERF+SLOT machine makes kerf and slot incisions on the edge of materials in gres porcelain, agglomerated, granite, marble and terrace allowing the insertion of supporting clips for the ventilated façades.
CompactLine
Italy
Ferrari & Cigarini SRL
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesStone Drilling, Slot Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
MRK KERF+SLOT+45°/90 machine makes kerf-slot incisions and 45°/90° cutting on the edge of materials in gres porcelain, agglomerated, granite, marble and terrace allowing the insertion of supporting clips for the ventilated façades.
CompactLine
Italy
Ferrari & Cigarini SRL
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesStone Drilling, Slot Machine
$37000-37500
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Anchor system, hook channel and hole is the machine.
Makes 4 holes and 4 grooves in one operation.
It provides you maximum speed with conveyor system and PLC control.
The machine for those who race against time
It opens 4 holes and 4 chamfer channel in a sing operation
Performance Durations-- Average time
Opening Holes --5 sec
Opening Channels --2 sec
Transition to Other Operation--4 sec
Total Operation Time-- 11 sec
SEN-MAK Koll.
Turkey
SEN-MAK Koll.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesStone Drilling, Slot Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
EQUIPPED WITH
4 horizontal drilling spindles
2 milling machines for pockets
2 horizontal milling machines for slot, stopped slot, prolonged slot, kerf, rebated kerf (with shaped wheel), QM (bevel cut)
The machine features:
2 slab conveyors with manually adjusted width for processing slabs of different sizes. Alongside each conveyor there is a guide to keep the slab aligned
4 drilling units, 2 on each side of the machine, which can travel along the whole length of the machine
2 cutting units for the pocket placed above two drilling units on each side of the machine
2 cutting units for slot/kerf placed above two drilling units on each side of the machine
2 mechanical stops to hold the slab in position during processing.
Work cycle
Processing occurs when the slab is not moving. The two conveyors move the slab to the mechanical stops. Before reaching them, speed is reduced to allow for smooth, precise positioning.
Then, drilling and pocket cutting are performed, or slots and kerfs are made. Once processing is over, the slab is moved backwards, the two mechanical stops retract, and the conveyors bring the slab to the discharge point.
A new slab is placed on the conveyors, and cycle is started again.
Machine specifications:
Slab max width: 180 cm
Slab min width: 25 cm
Max distance between 2 holes: 190 cm
Min distance between 2 holes without milling machine: 18 cm
Min distance between 2 holes with milling machine: 23 cm
Handling
Spindle handilng along the whole length of the machine and of the two carts is operated along precision guides by means of recirculating ball slide guides.
Motion is operated by precision rolled screws with recirculating ball bushes and precision gearboxes. The four spindles and the two carts are operated by brushless motors coupled with precision gearboxes and driven by electronic drivers which are in turn CNC-operated.
Precision in positioning
Precision in positioning is lower than +/- 0.2 mm.
Output
Depending on the material used (marble, tender or hard granite) the typical hole with 6-8 mm diameter and 25-30 mm depth is completed in 20-30 seconds. The distance between two slabs is about 20 cm which entails a motion time of about 20 seconds. Therefore, 4 holes are completed in 40-50 seconds, with an output of 290-360 holes per hour. The average repositioning time is about 5 seconds.
Lubrication
Lubrication of moving parts is centralized and automated. An automated lubrication cycle for periods when the machine is not used is also available.
Positioning system
It is automated thanks to an industrial computer. The operator must set slab width, hole position with reference to the mechanical stops, make requests for holes with or without pocket, and the automatic system will provide the necessary motions for the drilling heads and the carts.
Once the machine is positioned, the automated work cycle is started.
The height of the drilling spindles is adjusted by using a motor-reducer operated by two buttons on the spindle columns.
4 holes on each side of the slab can be made, along with two pockets on one side, as well as slots, prolonged slots, and kerfs.
The computer features also the following utilities:
Generation of drilling programs, storing of the programs by code (brand), list of and changes to the programs (on the machine) sorted by order
Generation of drilling programs, storing of the programs by code (brand), list of and changes to the programs on PC so that they can be later stored in the machine by using a floppy disc, and sorted by order
Displaying of drilling programs
Displaying of machine status (diagnostics)
Automatic synchronising
Storing and displaying of drilled slabs and of the holes made as of a given date (password required) Lubrication cycles for periods when the machine is not used.
Prometec
Italy
Prometec s.r.l.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesStone Drilling, Slot Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite
Machinery Function Features:
ASK HERE FOR A DRILLING MACHINE
HELIOS
Italy
Helios Automazioni Srl
Contact Supplier
- 1
Have a Question? Ask our expert
Ask now
