Granite Single Wire Block Squaring Machine in Turkey

SINGLEWIRE OZTKM 01, Produced by Ozteknik, is an open frame single wire machine for squaring blocks of marble and granite and for thick cuts.
The machine structure is made of two columns strongly fixed to foundations and one connecting transversal beam built in large thickness normalized steel work. Two carts which slide vertically on the columns of the support structure for the vertical motion of the cutting wire. The carts are moved vertically by screw/nut screw mechanisms, which are controlled by asynchronous motor.The wire is rotated by a driving pulley with a diameter of 2200 mm. Main motor and down feed motor have inverters by the way,the wire speed and down feed are controlled by the technician with friendly touchmatic screen.
A driven pulley with the same diameter ( 2200 mm ) is kept constantly under tension by a hydraulic cylinder.And machine has 2 guide pulleys whose function is to drive the wire next to the point where it gets into, and comes out from, the block to be sawn

PLC control system
Gives a perfect usage to the operator by the touchscreen
The block table can rotate 360 degrees to quickly and easily trim the block edges.
Thanks to the horizontal cut, it can be used to trim the top of block
For vertical cutting, the desired thickness is entered on the screen and makes a fully automatic cut.
It keeps the wire tension constant at the desired pressure.

KTK 80 AUTOMATIC WALKING ANGLED DIAMOND WIRED BLOCK MARBLE CUTTING MACHINE :
The diamond wire cuts the block marble by a rolling pulley. When the machine starts, engine moves the motor shaft and it turns the pulley. The gap creating while cutting on the diamond wire resolved by automatic walking engine, so that the cutting process occurs. Water is sending to the cutting zone by hoses controlled with valves. The water protects the cutting equipment from warming up and takes the marble dust away.

MTX 2000 Single Wired Block Cutting Machine
Single Wire Block Squaring Machine