Stationary Wire Saw

HQKJS -2000 diamond wire saw stone cutting machine is a good choice for irregular stone processing. Easy to operate, it can cut many special shape.
HQKJS - 3000 Diamond wire saw stone profiling cutting machine . Four-Axis linkage, which can process the circular stone slab, roman column, numeral, letter, Chinese characters and other designed shapes.
1. It has heavy load bearing structure, four orbits on each upright column, adjusted the balance by the rollers, with less friction and higher precision.
2. The left and right frame achieve synchronized lifting by steering equipment on the upper frame. The lifting accuracy increased by the conbine of lead screw and double nuts.
3. Cantilever part, firstly the lead screw and pole adjust the distance of guide wheel,guide wheel is controlled by CNC. Secondly in order to make the diamond wire rope cutting direction coincidence, reducer control the guide wheel rotating angle.
4. Worktable is running by lead screw and railway.
5. There has automatic alarm if wire broken.
6. Aluminum wheel diameter is 1600mm.One fly wheel slide through sheave, oil pump control rope tension.

SINGLEWIRE OZTKM 01, Produced by Ozteknik, is an open frame single wire machine for squaring blocks of marble and granite and for thick cuts.
The machine structure is made of two columns strongly fixed to foundations and one connecting transversal beam built in large thickness normalized steel work. Two carts which slide vertically on the columns of the support structure for the vertical motion of the cutting wire. The carts are moved vertically by screw/nut screw mechanisms, which are controlled by asynchronous motor.The wire is rotated by a driving pulley with a diameter of 2200 mm. Main motor and down feed motor have inverters by the way,the wire speed and down feed are controlled by the technician with friendly touchmatic screen.
A driven pulley with the same diameter ( 2200 mm ) is kept constantly under tension by a hydraulic cylinder.And machine has 2 guide pulleys whose function is to drive the wire next to the point where it gets into, and comes out from, the block to be sawn