Post Your Needs

Cutting and Splitting Machine

( 6 ) Have Prices
  • Quartz Stone Cutting Machine
    favorites
    Add To Compare

    Type: Artificial Stone MachinesCutting and Splitting Machine

    $100000-500000

    Warranty: 12 Months

    Usage: Artificial Stone

    Machinery Function Features:

    1、Quality Material
    JTM use high strength steel to weld the body of the cutting machine to make sure the machine is strong enough.
    2、Easy Operation And Maintenance
    The cutting machine is with very simple design, so the operation and maintenance of the machine are simple and convenient。
    3、High Efficiency And High Adaptablity
    JTM edge cutting machine is one of the most efficient cutting machine can cut thousands of slab per day. Also the length and width of the cutting balde is adjustable to cut slab with different size.
    4、Automation
    PLC controlled automatic cutting machine.
  • Continuous scoring and splitting Machine -NoStop Cut Waterless Processing Machine
    favorites
    Add To Compare

    Type: Artificial Stone MachinesCutting and Splitting Machine

    Warranty: 12 Months

    Usage: Artificial Stone

    Machinery Function Features:

    Cutting sizes from 150mm to 3200mm
    Splitting sizes from 200mm to 3200mm
    Up to 8 powered heads – 6 fixed engraving heads.
    Machine to obtain sub-sizes through splitting.
    The machine can operate in two modes and meet a wide range of production needs:
    Pre-cut + engraving: the tools equipped with discs make partial cuts on the bottom; subsequently, incipient fractures are made on these cuts by means of engraving heads.
    Engraving: is carried out only by means of engraving heads so as to make incipient fractures directly onto the original surface of the material. The above operating mode can only be applied to smooth, even surfaces, free of internal tensions.
    Pre-cutting and engraving head:
    Powered cutting unit with electric spindles with fixture for cutting discs. At the base of each cutting head is mounted a bar with press rolls that hold in line the material during machining, absorbing the stresses transmitted by the tool.
    The idle heads have the opportunity to bring two different types of engravers, one with a greater diameter for smooth or one with a smaller diameter, used for efficiently engraving even uneven surfaces.
    Roller splitting:
    The machine is used to split ceramic slabs along one or more incipient fractures made previously. The slab is split without stopping its forward motion along the line.
    The slab, carried by a conveyor belt, passes through 3 cross rollers with independent adjustment systems, placed two above and one below the conveyor belt to create a condition of interference which causes the rupture along the incipient fracture lines.
    Engraving and cutting with automatic dynamic tile centering device with pneumatic actuator and handwheel adjustment.
    Splitting unit consisting of 2 upper rollers with horizontal position adjustment system made up of electric jacks that adjust the machine for cutting slabs of different sizes. 1 bottom roller with vertical adjustment system made of a manual jack that adjusts the machine for cutting slabs of various thicknesses.
  • CombiCut Waterless Processing Transverse Scoring and Splitting Machine
    favorites
    Add To Compare

    Type: Artificial Stone MachinesCutting and Splitting Machine

    Warranty: 12 Months

    Usage: Artificial Stone

    Machinery Function Features:

    Sizes from 150mm to 1200mm
    Up to 3 cutting heads
    High productivity also with difficult products (eneven surfaces, stressed materials) thanks to disk pre-cutting.
    Small pitch between cuts thanks to the vertical motor arrangement.
    Automatic disk lifting with height adjustment setting.
    Motorized multi-scoring
    Multi-scoring with motorized pre-cutting in just one transverse working stroke.
    Up to three simultaneous scorings with pre-cutting at each stop.
    Integrated continuous splitting cycle in one compact structure
    Reduced overall dimensions of in line scoring-splitting system (-60% with respect to a continuous scoring line).
  • XL multidisk cutting machine for large size
    favorites
    Add To Compare

    Type: Artificial Stone MachinesCutting and Splitting Machine

    Warranty: 12 Months

    Usage: Artificial Stone

    Machinery Function Features:

    Sizes from 200mm to 3300mm
    Up to 16 cutting heads
    Automatic format change
    Cutting system with multiple discs for the execution of longitudinal and transversal cuts on large slabs and high thicknesses.
    By means of a variable number of cutting discs, positioned with great accuracy by a CN, it is possible to produce sub-formats and strips.
    Perpendicularity of the cuts
    Motion on belt
    The slabs move forward on belts that run on interchangeable wear-resistant steel plates. Replacement of the belt is facilitated by the special structure of the base.
    Pneumatic centring and alignment devices ensure perfectly perpendicular cuts on all formats.
  • XL Watercut water jet multi cut machine for large size
    favorites
    Add To Compare

    Type: Artificial Stone MachinesCutting and Splitting Machine

    Warranty: 12 Months

    Usage: Artificial Stone

    Machinery Function Features:

    Sizes from 1000mm to 1600mm
    Up to 19 cutting heads
    System with water-jet technology for the execution of longitudinal and transversal cuts on large slabs.
    Cutting Nozzles
    Through a variable number of cutting nozzles it is possible to produce submultiples and strips. The cut is extremely precise, so much as not to require further finishing.
    Cutting Fluid
    The water flows out with a pressure of over 4000 bar along with abrasive powder.
    Motion on Rollers
    The slabs move forward on high accuracy rectified rollers to ensure perfect straightness of the cuts.
    Pusher
    The perfect perpendicularity of the sides is ensured by an NC pusher command.
    Diverter
    After the first cutting phase the sheet is moved to 90 degrees to be able to make the cut in the transversal direction.
    Control panel
    Easy and rapid set-up due to touchscreen.
  • XL GreenCut Machine cutting of large size unfired slabs
    favorites
    Add To Compare

    Type: Artificial Stone MachinesCutting and Splitting Machine

    Warranty: 12 Months

    Usage: Artificial Stone

    Machinery Function Features:

    Sizes from 200mm to 3300mm
    Up to 3 longitudinal cutting heads
    Up to 4 cross-cutting heads
    Machine for cutting large unfired slabs, featuring a cross lane and a longitudinal lane, a disc cutting unit to make cuts on ceramic slabs in both directions, in positions programmable via a touch-screen control panel. Longitudinal cuts made while moving, crosscuts made at a standstill.
    Sturdy structure made of welded steel profiles with built-in bearing cross-beam for longitudinal cuts. Conveyor unit controlled by inverter for the adjustment of belt infeed speed.
    Disc cutting spindles, driven by 2-pole three-phase motors of 3.2kW connected to dust extraction pipes. Connections to dust extraction system on all the cutting units and the return branch of the conveyor belt.
    Cutting unit, consisting of a carriage installed on ball circulation slides that move crosswise in relation to the cutting direction. The crosswise positioning of the carriages is ensured by gear motors with encoder. Maximum precision in determining the cutting depth.
  • 1

Have a Question? Ask our expert

Clear All
Compare (0/4)
StoneContact
Tips

Tell Suppliers what you want to buy