Single Wire Block Squaring Machine in Portugal

Monowire is a cutting machine for ornamental stone diamond wire that has as main purpose the preparation of the raw material extracted crude for further processing. For the same reason, it is prepared to process large blocks and can run sheet for sawing or polishing disc by cutting, or simply hit blocks for mills strip or multiwire.
One of the main advantages of the diamond wire cutting, in addition to smoothness and low power consumption, is precisely cut large floor area, far superior to any disc machine. In normal operation is expected yields in the order of 2,8m2 / h granite (with level. Descending = 80cm / h) or 7m2 / h marble (with level. Descending = 2m / h). The ceilings will always be dependent on diamond wire and type of stone to be cut.
Monowire MF / MFC
When the machine is fixed and is the table to move the stone to the cutting zone, the machine has the MF designation. Such monofilament was thought to work one stone block at a time. In the case of MFC it is possible to position several blocks on the ground with the wire to move along the rails. The length of the rails is variable depending on customer requirements, which may also contain one or more fixed tables (with or without rotation) to work in smaller blocks.
In the case of MFC monowire Copier, in addition to all the advantages presented by the MFC, there is also the ability to draw up detailed work on the wire cut according to a predetermined design. This option does not prejudge the cutting plates or blocks, as the mechanical system developed for the copy system is easily and quickly disabled, as you can see in the pictures below

Ref.: 98
Twix Roller for chipping the blocks with the diamond wire. The machine has two adjustable mobile parts to enable cutting the block into different sizes in one go. It can be programmed to cut several measurements in the same block or in various sequenced rows of blocks. Data management and storage.

Ref.: 99
Monowire Roller has the function of trimming blocks with diamond wire and cutting slabs of variable thickness. Programmable to cut several measures in the same block or in several blocks in a row placed in line.
Data management and memorization.